Gundam Model Kits

Showing 21 - 50 of 1488 products

img
SAVE RM10.78

[003] HGIBO 1/144 MS Option Set 3 N Gjallarhorn Mobile Worker

  • 3rd appearance weapon set that was to set the proximity weapons and Mobile worker!
  • A scene that has attacked the heroes along with the Grey's in the first episode is impressive, even Mobile workers Gyararuhorun owned included!
  • Halberd (provisional) can reproduce the stored state and deployment state in replacement.
  • HG Gundam ing with a Zion, comes with proximity armed, such as ing Sion Axe (provisional) and grayed Sion chopper (provisional).
ACCESSORIES:
  • Ing Sion Axe (provisional) × 1
  • Ing Sion chopper (provisional) × 1
  • Halberd (provisional) × 1
  • Galleria Le Horn Mobile worker × 1
Item Size/Weight : 18.8 x 14.9 x 4.6 cm / 86g

RM25.20
img
SAVE RM40.90

[054] HG 1/144 Gundam 00 Raiser + GN Sword III

  • Raiser + GN Sword III of the final battle specification is the product of a normal color!
  • Effects are clear parts. GN Sword II also included of course.
  • Sword mode rifle mode can be converted to GN Sword III.
  • Effects blade part of GN Sword III also reproduced in clear plastic.
  • Accessories: GN Sword III × 1, GN Sword II × 2, GN beam saber × 2, GN shield × 1

RM79.00
img
SAVE RM95.90

MG 1/100 Strike Freedom Gundam

  • This is a 1/100 scale (approx 189mm) model kit with movable joints.
  • The proportion has been re-arranged with liveliness, based on MG FREEDOM GUNDAM.
  • The wings unfold as seen on the animation, also installed with sliding gimmick.
  • The joints of the legs react with leg armors when moved.
  • The rail gun is also installed with retractile gimmick when opened.
  • Two beam sabers and two beam shields (made with extra thin PET) included.
  • 1/100 Kira Yamato (pilot ver and display ver) and 1/100 Lacus Clyne included.
  • Foil stickers, marking stickers and dry decal included.

RM192.00
img
SAVE RM79.90

MG 1/100 Strike Rouge Gundam

  • All the fabulous detail that you'd expect in a kit of this quality and scale,including Bandai's beloved dry-transfer decals and less-beloved clear stickers. 
  • A 1/20 scale unpainted figure of Cagalli, in flight suit, is included. Included a base stand, weapons such as 2 beam saber, beam gun, Shield, and pistol.

RM160.00
img
SAVE RM192.90

PG 1/60 MS-06S Char's Zaku II

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

Weight : 1650g

RM468.00
img
SAVE RM180.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM480.00
img
SAVE RM99.60

MG 1/100 RX-75 Guntank

  • Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  • Linked movement for the caterpillar, allowing flexible movement. 
  • Caterpillar has the feature of resistance to the surface when rotating. 
  • Dozato Carrier in front and behind the chassis can be deployed. 
  • Stands included to show the docking sequence of Core Fighter to Guntank. 
  • Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  • LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg

RM188.30
img
SAVE RM79.90

MG 1/100 AMX-004 QUBELEY

  • Released Date: 2001 Well armed with two beam sabers and 12 1.3MW funnel remote beam weapons. 
  • From the head to the individual finger joints to the 10 funnel systems, each can be individually posed and removed. 
  • The shoulder armor opens just like the prototype. 
  • Binder with accureate details and thruster. 
  • Details opening cockpit area. 
  •  Weight: 1kg

RM160.00
img
SAVE RM49.80

[007] NG 1/100 Grimgerde

  • The newest Mobile Suit Gundam: Iron-Blooded Orphans is the Grimgerde! 
  • Its internal frame recreates the look of the Valkyrie Frame. 
  • On the outside, its armor is up-detailed for 1/100! 
  • Its head opens, and of course, it’s armed with a rifle and two blades!

RM100.00
img
SAVE RM7.70

[248] SDBB Gundam Astray Red Frame

BB-248 Gundam Astray Red Frame Weight: 500g

RM21.20
img
SAVE RM7.90

[257] SDBB Freedom Gundam

BB#257 Freedom Gundam Simple Instruction in a box. Weight: 500g

Rare BB Gundam, hurry grab it while stock limited. Freedom in the palm of your hand! Very well-designed SD Freedom Gundam is molded in colored plastic and features snap-fit assembly; stickers are included for details.

RM21.00
img
SAVE RM20.90

[259] SDBB Strike Gundam SWS

- BB-259 Strike Freedom Gundam SWS - Here we get a cute, deformed version of the popular Gundam Seed machine, the Strike Gundam with Striker Weapon System. Can be modified into any one of three other modes (Aile Strike Sword Strike, Launcher Strike); included is the weapon transport fighter "Sky Grasper". Pretty sophisticated for a little kit that runs just 1,000 yen! - Weight: 260g

RM39.00
img
SAVE RM7.70

[261] SDBB Aegis Gundam

  • BB-261 Aegis Gundam 
  • Simple instruction in a box 
  • Box Weight: 162g
  • Transformable to  Scylla 580mm energy cannon!
  • Latest Aegis Gundam Series : MG 1/100 GAT X-303 Aegis Gundam

RM21.20
img
SAVE RM10.50

[268] SDBB Justice Gundam

  • BB-268 Justice Gundam Simple instruction included in a box. Weight: 162g

RM25.40
img
SAVE RM26.10

HG 1/550 Mechanic RX-78GP03 Gundam Dendrobium

Yet another "wow" when I opened the box. A good affordable kit of the "Dendrobium" has been needed for a long time and Bandai finally serves one up. Hatches on the missile bays can be posed open or closed. The GP-03S is removable and slightly poseable. Claw units are poseable and you can have with or without the beam saber. Kit is largely snap-together but you do need cement and paint for the GP03S Steimen and the Garbera-Tetra.. Item Size/Weight : 32 x 19.3 x 8.4 cm / 430g

RM63.80
img
SAVE RM16.00

[288] SDBB Strike Freedom Gundam

  • BB-288 Strike Freedom Gundam Simple instruction included in a box. 
  • Weight: 500g The Strike Freedom Gundam gets the SD treatment; with gold-colored polycaps and bright foil stickers for detail, its pre-colored parts all snap together, so no glue or paint is required to finish it. 
  • A great kit for beginners, or an evening project for more experienced modellers who just want to have some fun!

RM31.90
img
SAVE RM16.00

[290] SDBB Destiny Gundam

- Also included is a pair of Palma Faciona hands [Shining Finger], comes in white color! - The best thing is the inclusion of transparent pink parts for the wings for its volture lumiere (however you spell it). BB-290 Destiny Gundam Simple instruction included in a box. Weight; 162g

RM31.90
img
SAVE RM20.00

[360] SDBB Unicorn Gundam

  • Gimmick packed SD only. Transform myself reproduction.
  • Destroy Mode ⇔ Unicorn mode: replacement part, reproduce the transformation characteristic by the deployment.
  • Characteristic [Full Psycho Frame part reproduced in clear material.
  • marking comes in Tetoron seal.
  • Shield deformation. Saber effects expression in movement.
  • BB Senshi original gimmick [Unicorn Beast Mode: chest and head
  • I transform myself into a BB Senshi original mode in the mounting of the rotating shield saber.
  • Can play a ride to and collect two sets.
  •  Accessories] Beam Magnum, beam saber, shield

RM39.90
img
SAVE RM55.90

MG 1/100 Master Gundam

  • Up to reproduce the features of the G Gundam series action poses with the new action frame.
  • By entering the body of the chest unit to reproduce the arms folded pose.
  • Master Cross (weapons), with figures of Master Asia.

RM112.00
img
SAVE RM110.90

MG 1/100 MSA-0011 S Gundam

A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 


Although the S Gundam had three separate cockpits, the other two were not used until the very end of the plot, where three pilots would be saved by the core block system (see below). Since its plans are highly classified, it is said in chapter 1, Revolt in Pezun, that the pilots have been only able to train in Z Plus B types, which are the highest performance transformable mobile suit they have access to. The S Gundam is equipped with relatively heavier armour than its Z Plus cousin, which is specifically mentioned in the story (Chapter 2:Sally Forth! S Gundam) where the 2 Z Plus C1 accompanying the S Gundam in its booster configuration took more damage even though S Gundam was at a much higher acceleration when against enemy fire. To further confirm this point, the author mentions that the pilot cannot even bear to imagine what will happen if they are using Neros or GM IIIs in the same situation. Within the design notes, the offensive capabilities of the S Gundam featured a highly accurate beam smart gun, with 12MW power operating the beam smart gun normally, the unit can connect the beam smart gun to two extra power outlets on both left and right hips or the centre of its belly, to supply extra power that increases the beam smart gun up to 56MW. 

However, this will have to sacrifice the mounting of one of the two 12MW beam guns that are similar to the ones used in the Zeta Plus mobile suit series. Two beam cannons protruded from the S Gundam's backpack over the shoulders, and it also featured four 60 mm vulcans in the tail stabilizer and four 60 mm vulcan guns in the head, in which the mechanical designer, Katoki Hajime, specially took the problems of this weapon in the pass series into account, including the barrel length being too short which means the weapon can only have grenade launcher effects as well as no space for ammo, and lengthened the barrel (also the depth of the head of S Gundam) and introduced the liquid explosives electronic firing mechanism to the design[2], in which later retconed earlier designs and is again mentioned in Gundam Officials, the Gundam Encyclopedia and Master Grade instructions. It also featured a red circular-shaped wire-guided remote beam weapon called an Incom that was stored in the forehead. And finally, to round out the S Gundam's weaponry, the unit featured two beam sabers stored in recharge racks in the small white protrusions in the unit's knees. The S Gundam is built on a modular design, made up of two separate transformable units that could combine with a core fighter variant called the G Core to create the full S Gundam. The S Gundam was capable of separating into the 3 crafts. The G-Attacker (also referred to as the A Parts) is one of the crafts, which was made up of the upper torso area of the S Gundam. The second craft was called the G-Bomber (also referred to as the B Parts), which were composed of the lower torso and legs of the S Gundam. 

The G-Core core fighter, which were the C Parts of the S Gundam, was flown by Ryu Roots. The story used this mechanism as a make shift role for the task force alpha not having enough mobile suits for the battle and has to compromise by separating the S Gundam for 3 pilots in chapter 12, Pursuit. The author also made his own disbelieve in combining robots[4] in the midst of battle into the plot, where S Gundam is forced to combine back into the mobile suit form and sacrifice of the 3 pilots' instructor was made by being their shield in order to buy them time for the combination in chapter 13, Triple Attack. A.L.I.C.E. The S Gundam in Gundam Sentinel featured a unique and incredibly complex artificial intelligence computer that went by the acronym name A.L.I.C.E., which was developed by Ryu Roots' mother, Meith Roots. A.L.I.C.E., which stood for Advanced Logistic & Inconsequence Cognizing Equipment, was more than the standard learning computer featured in earlier mobile suits; "she" had the capability to think and to grow. The growth of ALICE is one of the main plot lines to the story, compared to the growth of the main character Ryu Roots. In "her" early stages of growth ALICE was not yet a full individual, but "her" experiences with Ryu Roots would help "her" to grow. ALICE is originally programmed to place the pilot(s) life as first priority, and could assume total control of the S Gundam if "she" felt that the unit was in danger. 

This function has been used throughout the plot to save the pilot's life and caused confusion to the pilot since Ryu Roots has no knowledge of ALICE's existence even towards the very end of the story. Although 4 S Gundams have been produced, it is known that the other 3 S Gundams do not have the ALICE system installed on it. 

Stories source from: http://en.wikipedia.org Total 505pcs parts Simple Instruction included in a box.

RM220.00
img
SAVE RM55.90

MG 1/100 RX-78-4 Gundam Unit 4 "G04"

Made up of 11 runners of injection plastic and one runner of polycaps, with two small sets of decals for detail, this is easily one of the most complex of the Gundam versions. Lots of poseability thanks to polycaps at the joints. It does not feature the inner-frame system. Weapons included Beam Gun, 2 Laser Swords, Shield and Giant Beam Sniper. Simple instruction included in a box. Weight: 1000g

RM112.00
img
SAVE RM68.90

MG 1/100 MSA-003 NEMO

  • Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  • Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  • Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  • Dry transfer decals and clear Gundam stickers are included for markings. 
  • Simple instruction included in a box. 
  • Weight: 529g

RM99.00
img
SAVE RM32.30

[068] HG 1/144 Gundam Harute

- 1 / 144 the size amazing transformation! Gandam Harute! - Reproduce the form of the transformation gimmick detachable rifle. - MS-time form, reproducing moving back binder. - Detachable backpack. Each movement in the base. - Accessories: Rifles × 2, Backpack. Item Size/Weight : 31 x 19.1 x 7.8 cm / 387g

RM75.60
img
SAVE RM23.90

[114] HGUC 1/144 RB-79 Ball Twin Set

  • HGUC release the ball from the set of 2! 
  • Ball-inspired style Fasutogandamu version. 
  • Appeared in Platoon 08 180mm cannon in addition to the low recoil, comes with twin Fifutinkyariba expression. 
  • Comes with display base. 
  • The camera reproduced with clear parts. 
  • Movable arm portion. 
  • Will be set two. 
  • Accessories: low recoil cannon base × 2,180 mm × 2, twin Fifutinkyariba

RM54.00
img
SAVE RM45.90

NG 1/100 GN-002 Gundam Dynames

Introducing GUNDAM DYNAMES featured in GUNDAM 00 from 1/100 scale series. Various wrists and foil stickers included. Covering parts in the waist for stable-ness. Belts made with TPE. Chest lens and shoulder belts made with special material. New joint system installed. Double joint system in the shoulders. Accessories include of: Includes beam rifle, beam sabers, hand guns, and armor covers.

RM92.00
img
SAVE RM35.90

[069] HG 1/144 Raphael Gundam

Accessories: beam rifle, a dedicated base. Simple instruction included in a box.


History:

The Raphael Gundam was first deployed by Tieria Erde during Celestial Being's first attempted contact with the ELS. During this mission, Setsuna F. Seiei used the 00 Raiser Condenser Type and attempted to make contact with the ELS, but his attempt failed and the ELS attacked, with two ELS hitting the 00 Raiser's left arm and beginning to assimilate. However, Tieria arrived in the Raphael to assist, forcibly ripping off the 00 Raiser's left arm and saving the rest of the machine from assimilation, allowing Celestial Being to escape. Raphael's second deployment was during Setsuna's second attempt to communicate, this time using a combination of the Raiser System and Trans-Am to produce a Trans-Am Burst-like effect and expand his quantum field of communications. However, the ELS reacted violently and delivered a crippling mind attack to Setsuna, rendering him comatose and leaving the 00 Raiser open to assimilation. In his desparation to save Setsuna, Tieria quickly revealed the true form of Raphael's backpack, GN-008RE Seravee Gundam II. Using his quantum brainwaves, Tieria used the Seravee to forcibly rip the 00 Raiser's cockpit from the rest of the machine. After handing the cockpit to Lockon Stratos in the GN-010 Gundam Zabanya, Tieria took it upon himself to hold off the ELS long enough for Lockon to escape with Setsuna. However, even with his quantum brainwaves, the Seravee, and Raphael's Trans-Am System activated, Tieria was eventually overwhelmed by the ELS and suffered a mind attack of his own, leaving both the Raphael and the Seravee open to attack. Tieria's physical body, the Raphael and the Seravee were assimilated along with the 00 Raiser, forcing Tieria to return to Veda.

RM84.00
img
SAVE RM98.70

MG 1/100 Destiny Gundam Extreme Blast Mode

  • Includes a number of elements to recreate the Extreme Blast effect from the big screen!
  • Effect materials manufactured from PET, giving them a unique shimmer. 
  • Joints feature heavy plating. 
  • Includes 1/20 scale pilot figure! 
  • Accessories: High-Energy Long-Range Beam Cannon x1, Arondight Beam Sword x1, Beam Boomerang x2, Effect Parts x5, 1/100 Pilot Figure x1, 1/20 Pilot Figure x2

RM287.20
img
SAVE RM51.90

[001] RG 1/144 RX-78-2 Gundam

  • Runner x 10, Realistic decal x1, Instruction manual 
  • A new series REAL GRADE (RG) rolls out in July 2010. 
  • A new brand of plastic model kit that pursues realistic representation with the latest technology for all those who know Gundam. A highly detailed model that has dynamic action and gimmicks. A pre-constructed inner frame makes assembling stress-free. 
  • All settings of RX-78-2 Gundam are consolidated into the 125mm tall body. 
  • Having an inner frame "Advanced MS Joint" which makes it possible to move dynamically with fewer parts. 
  • Attached the "Realistic Decal" that pursues reality with special material.

RM98.00
img
SAVE RM51.90

[116] HGUC 1/144 MSN-06S Sinanju

  • Bearing resemblance to the ‘Red Comet’, the rival machine with great impact,
  •   Sinanju has arrived in HG!
  • The reproduction of mechanism settings for the HG series has been greatly pursued.
  • The characteristic thruster parts have been given mobility. The thrusters of the legs
  •   are given independent mobility.
  • The impressionable backpack can be opened and closed. This will add more variety to
  •   the posing expressions.
  • The complicated engravings had been reproduced too. The engravings have been
  •   reproduced by the use of foil sheets.
  • By the utilization of part structure that stops the parts joints to standing out too much,
  •   the level of completion has been improved.
  • Also includes a set of closed fist (left and right).
  • The great variety of weaponry allows you to recreate many of the scenes from the
  •   original animation!
  • The attachment/detachment gimmick of the grenade part on the Beam Rifle
  •   had been reproduced.
  • The Grenade, Beam Axe (Storage Mode), and Beam Axe (Expanded Mode) can be
  •   attached to the back of the shield.
  • Beam Axe can be combined to become the Beam Naginata.
  • Accessories: Beam Saber x2, Beam Rifle, Shield, Beam Axe (Expanded Mode) x2,
  •   Beam Axe (Storage Mode) x2

RM104.00
img
SAVE RM55.90

[085] HGUC 1/144 RGZ-91 Re-GZ

  • Re-GZ appeared from [Mobile Suit Gundam: Char's Counterattack.
  • Reproduce the mechanism of deformation to form by the Fighter Space (Back Weapon System) BWS.
  • The deformation mechanism is adopted as part replacement formula, pursue the ease of play of transformation gimmick.
  • Pursuing the proportion seems to form space fighter aircraft by reducing the thickness of the fuselage.
  • To adopt a gimmick stretch the legs. Precise details of the internal mechanism, such as vernier Apojimota
  • Reproduction.
  • Comes the action-based connection unit for the display of a single BWS
  • (Action Base 2 is not included).
  • Weapons - Accessories: beam rifle, shield, beam saber

RM112.00

Showing 21 - 50 of 1488 products