Price Clear







Star wars Model Kits

Showing 21 - 50 of 51 products

img
SAVE RM51.80

[Star Wars] 1/72 First Order Tie Fighter

[Star Wars] 1/72 First Order Tie Fighter
Kit includes two canopies, two seated figures, 1 standing figure, base, laser blasts and decals

RM92.00
img
SAVE RM62.30

[Star Wars] 1/72 Resistence X-Wing Fighter

  • X-Wing Fighter Resistance specification 1/72 scale that appeared during the "awakening of Star Wars / Force" drama.
  • Possible desorption of BB-8 to support adjustment and pilot of the aircraft.
  • Airframe side of the line is to reproduce the color-coded in the molding color, other fine line using the water transfer type decals and marking seal.
  • Canopy and those of the all-clear material, two is supplied only frame.
  • to reproduce the detail over the details by verifying the thorough article condensation in the 1/72 scale.
  • Distinctive wings reproduce the opening and closing of the same in the play.
  • Chakuyukaashi comes the landing gear to reproduce the implantation and maintenance state.
  • Laser cannon can reproduce the figure decided to attack by inserting the laser effect to the wing tip.
  • Display base desert motif of Jakhu of aircraft. Based multiple connection possible with the joint parts.
  • The same scale of the pilot (seated type upright type) and BB-8 is included.
  • [Accessories] dedicated display case x 1, pilot figures x 2 (seated x 1, upright x 1), BB-8 x 1, x 2 canopy species (Clear parts x 1, frame parts x 1), effect parts x 2 , Chakuyukaashi x set
  • [Commodity content] moldings x 4, water transfer type decal x 1, marking seal x 1, assembly instructions x 1

RM93.60
img
SAVE RM43.30

[Star Wars] 1/12 Stormtrooper

Bandai's "Star Wars" lineup expands with the 1/12-scale Storm Trooper model kit! This standard-issue bucket head will come with multiple interchangeable hands, several weapons and a removable holster, as well as a display base. Fully posable after assembly, he'll be ready to whack his head into overhead doors, get beaten up by Ewoks, or escort Death Star prisoners to their doom as you choose! 

Buy several and build a whole platoon!

Bonus:
-E-11 blaster
-DLT-19 heavy blaster rifle
-Close combat pistol
-Display base x2
-Hand parts x6 types (weapon holding hand x2, flat hands x2, right fist, left point hand part)

RM93.60
img
SAVE RM50.30

[Star Wars] 1/12 Darth Vader

Bandai makes a big splash in the 'Star Wars' world with its 1/12-scale Darth Vader model kit!  This version of the Dark Lord of the Sith depicts him as seen in 'The Empire Strikes Back,' and includes interchangeable hands, a removable helmet, a light saber hilt and a ready-for-battle light saber.  His cape is also jointed for dramatic poses! A base is included as well.  Come over to the Dark Side and place your order today!


  • Release Date: Nov 2014
  • In the battle of episode 5 of the Cloud City], and reproduced in 1/12 scale model Darth Vader was confronted by overwhelming force.
  • This is first Star Wars character plastic model kits!
  • Helmet: head cover removable helmet.
  • Water decal in use too.
  • Set include Two light saber x (handle state-light blade unfolded state), Dedicated display base x 1, (Weapon possession x 2, left fist x 1, smack x 2) 5 kinds of hand parts x 1
  • Height: approx 169mm.

  • This is pre-painted plastic model kits and require snap-fit assembly only.

    RM93.60
    img
    SAVE RM62.30

    [Star Wars] 1/72 X-Wing Starfighter

    • This item is an injection-plastic kit of a science-fiction/anime item.
    • From "Star Wars Episode IV", Bandai presents us with an exquisitely detailed kit of the X-wing Starfighter in 1/72 scale! This kit includes parts for two pilots (one standing and one sitting) and posable versions of R2-D2 and R5-D4! Other accessories include proton torpedoes and a clear and clouded part for the canopy window. And last but not least, this set includes a Death Star Surface display base, as well as a Death Star Exhaust Port display piece so you can recreate the final, epic battle scene from the movie!Release Date: Nov 2014
    • The kit in 72 scale X-wing starfighter Luke Skywalker was boarding in [episode 4].
    • Accessories: landing gear to reproduce the landing and maintenance state is included.
    • Astromech droid of the body 2 of the R2-D2, R5-D4 and (seated type upright type) pilot of the same scale comes with legs moving in an upright-walking time for both Droid.
    • Set include: Death Star exhaust heat ports base × 1, Death Star surface base × 1, Proton torpedo effect × 2, Pilot figure × 2 (seated upright × 1 · × 1), R2-D2 × 1,  R5-D4 × 1, Landing leg × 1 expression, (Clear parts × 1 · frame parts × 1) 2 × canopy species.
    • Full length: approx 173mm.
    • This is pre-painted plastic model kits and require snap-fit assembly only.

    RM93.60
    img
    SAVE RM50.30

    [Star Wars] 1/72 TIE Advanced x1

    This item is an injection-plastic kit of a science-fiction/anime item.  

    Here is Darth Vader's TIE Fighter, now in snap-fit Bandai quality plamo goodness!  This amazing kit includes two Darth Vader figures--a seated one to pilot the vehicle, and a standing one for display alongside it.  Two types of removable display windows are included for the cockpit, and a Death Star panel display base will show this wicked machine off in style!  Laser effects are also included. Don't miss out on this iconic fighter!  

    Release Date: Nov 2014

    To detail reproduced in 1:72 scale Thai Advanced x1 Darth Vader was boarding in [episode 4].

    Set include : Death Star surface base × 1, Laser effects × 2, Darth Vader figure × 2 (seated upright × 1 · × 1), (Clear parts × 1 · frame parts × 1) 2 kinds of view boat ×

    Full length: approx 85mm.

    This is pre-painted plastic model kits and require snap-fit assembly only..

    RM93.60
    img
    SAVE RM45.50

    [Star Wars] 1/48 AT-ST

    This item is an injection-plastic kit of a science-fiction/anime item.  

    The AT-ST -- or the All Terrain Scout Transport -- is joining Bandai's lineup of exciting Star Wars kits! Add a little more mechanical flair to your Star Wars collection with the Empire's "chicken walker." You might want to keep this one away from the Ewoks.

    This snapfit kit consists of parts molded in grey and brown plastic, and includes a Wookiee figurine, pilot figurine, red effects parts, and display terrain base. Also included are markings as both stickers and water-slide decals.

    RM98.40
    img
    SAVE RM71.90

    [Star Wars] 1/72 Tie Fighter

    This item is an injection-plastic kit of a science-fiction/anime item.  

    Able to operate both in space and in planetary atmosphere, the TIE fighter was the Empire's most easily recognizable spacecraft. This snapfit kit consists of parts molded in grey, black, and clear plastic, and includes two pilot figurines, green effects parts, and a flexible display base. Also included are markings as both stickers and water-slide decals. 

    RM72.00
    img
    SAVE RM50.30

    [Star Wars] 1/12 R2-D2 & R5-D4

    This item is an injection-plastic kit of a science-fiction/anime item.  

    Sassy sidekick R2-D2 and the Lars Homestead's own R5-D4 are joining Bandai's exciting lineup of model kits! This set includes both of the Skywalker droids in 1/12 scale, and an assortment of accessories.
    Please note that the photos shown are of the prototype version and may change before release.

    RM93.60
    img
    SAVE RM62.86

    [Star Wars] 1/12 C-3PO

    • The three-dimensional at 1/12 scale the typical protocol droid of Star Wars [C-3PO].
    • Re-examine the wide range of materials in order to reproduce the fine detail, condensed in the 1/12 scale.
    • Abdomen of cable will also use some soft material, reproduction.
    • The base comes with those of the image of the floor of the internal Death Star. Also possible to be linked with other products of the pedestal of sale.
    • Hand parts are included
    • [C-3PO] characteristic reproduce gold of the body at the commitment plating specifications. Right foot is reproduced in silver-plated.
    Accessories: face parts × 2 types (normal type, damage type), damage eye parts, commlink × 2, control bolt × 2, control bolt mounting body parts, smack (left and right), commlink holding Possession ( left and right), plated arm parts for display (left and right), a dedicated display base

    RM147.00
    img
    SAVE RM71.90

    [Star Wars] 1/48 Snowspeeder

    • At the Star Wars [Strikes Back Episode 5 / empire], three-dimensional in 1/48 scale Snowspeeder hero Luke Skywalker was boarding!
    • Condensed the details of detail in the 1/48 scale from the verification of thorough Prop (imaging model).
    • The replacement of parts, to reproduce the opening and closing state of air brake.
    • Snow Speeder can be reproduced to fire a laser gun with a laser effect.
    • Seating type figure of the same scale is two bodies included. Snowfield in the AT-AT a defeated power Harpoon (harpoon) parts of the host is also included.
    • Supplied base image the snowy field host. Based multiple connection is possible with the joint parts.

    Accessories: Dedicated display base, laser effect parts x 2,1 / 48 figure x 2 species (pilot, gunner), canopy x 2 species (frame & clear parts, clear parts), Power Harpoon (harpoon) parts, air brake opening and closing reproduction parts four x 2

    RM72.00
    img
    SAVE RM94.00

    [Star Wars] 1/12 Scout Trooper & Speeder Bike

    [Star Wars] 1/12 Scout Trooper & Speeder Bike

    • Accessories: scout trooper, speeder bike, dedicated display base × 2 (Endor image, Death Star image), scout trooper blaster, hand parts × 5 species (grip grip left and right × 2 / smack × 2 / weapon possession), rear parts × 2 of Repulsor drive (open / closed)

    RM195.00
    img
    SAVE RM108.86

    [Star Wars] 1/72 Y-Wing Starfighter

    [Star Wars] 1/72 Y-Wing Starfighter

    • Accessories: Death Star surface-based, laser effect parts, the same scale pilot figure x 3 (upright x 1, seated x 2 types), the same scale astromech droid x 2 species, canopy x 2 species (frame parts, clear parts ), Chakuyukaashi

    RM95.00
    img
    SAVE RM56.59

    [Star Wars] 1/12 Sand Trooper

    [Star Wars] 1/12 Sand Trooper

    • Accessories: only display base, backpack, shoulder pads, small pack × 3, T-21 fire formula light blaster, E-11 blaster rifle, DLT-19 heavy blaster rifle, SE-14r short-range combat pistol, weapon possession × 2, smack × 2, left pointing hand, right hand grip

    RM105.30
    img
    SAVE RM119.85

    [Star Wars] 1/144 Slave I

    [Star Wars] 1/144 Slave I

    • Accessories: (road part of the selection formula) dedicated display-based, laser effect parts × 2, Boba Fett figure × 2 (upright-seated), carbonite frozen Han Solo figure, hangar hatch opening and closing reproduction parts two × 2, apron / flight state reproduction for both wings cylinder parts two × 2

    RM108.00
    img
    SAVE RM195.61

    [Star Wars] 1/48 X-Wing Starfighter (Moving Edition)

    • This product is only sold in Japan currently.
    • Not many units available ~ hurry while stock lasts.
    • 3xAA battery required and sold separately.
    • [STAR WARS] 1/48 X-WING STARFIGHTER MOVING EDITION

    RM392.00
    img
    SAVE RM128.78

    [STAR WARS] 1/144 Millennium Falcon

    The Millennium Falcon was a Corellian YT-1300 light freighter used by the smugglers Han Solo and Chewbacca during the Galactic Civil War. It was previously owned by Lando Calrissian, who lost it to Solo in a game of sabacc.

    Its aged appearance belied numerous advanced modifications to boost the ship's speed, weapons and shield, including a hyperdrive engine among the fastest in the entire galaxy, enabling it to outrunImperial Star Destroyers. It also included sensor-proof smuggling compartments, which were used during the rescue of Princess Leia Organa to evade Imperial stormtroopers. Afterwards, the Millennium Falcon saw further action when Solo chose to join the Rebels during the Battle of Yavin, where it was able to sneak up on Darth Vader'sTIE Advanced.

    After Han was captured on Bespin, Lando took command of theFalcon once more to search for him, and later flew the ship at theBattle of Endor, where it entered the Death Star II and destroyed it from within. During this battle, the starship's circular sensor dish was knocked off as Calrissian piloted it through the Death Star's interior.

    In addition to its renowned hyperdrive, which made the Falconboasted as the "fastest ship in the galaxy," the ship was equipped with a backup hyperdrive. Compared to the primary engine, it was much slower and often took several weeks or months to reach the nearest star system. It also had a dejarik table featuring creatures found throughout the galaxy.

    At some point over the following thirty years, the sensor dish was replaced with a rectangular model.

    RM195.00
    img
    SAVE RM50.30

    [Star Wars] 1/12 First Order Stormtrooper

    Bandai are continuing their 1/12th figure range with the new First Order storm trooper. The snap together kit can be built up unpainted but we think the traditional glue and paint method will make this into a cool looking model - Don't know too much about the First order?


    In the years that followed the battle of Endor and the fall of the Galactic Empire, the break-off movement called the "First Order" emerged, inspired by the principals of the fallen government and led by former officers of the Empire.

    The First Order was active approximately thirty years after the Battle of Endor, and fought against the Resistance. Just like the Empire - the First Order employed the use of stormtroopers, including variants such as flametroopers and snowtroopers.

    The new model storm trooper featured in "The Force Awakens" has a slightly slipstreamed body armour look. And this model can be posed in most positions for you to use wherever you want. 

    The new Bandai kit in 1/12th scale comes with a bunch of optional parts, a small display base that can be joined to another trooper to make your own army in perfect ranks!

    Accessories that come with this kit :
    - Exclusive display base x 1
    - Blaster x 1
    - Tonfa shield x1
    - Water transfer type decal x 1
    - Stickers x 1

    The six different hand parts left fist and right fist weapon holding both hands & two pointing hands left and right.

    RM93.60
    img
    SAVE RM50.30

    [Star Wars] 1/12 R2-D2 & BB-8

    [Star Wars] 1/12 R2-D2 & BB-8
    [Accessory] 

    • Dedicated display base × 2 
    • BB-8 dedicated stand × 1 
    • R2-D2 Various arm parts × 7 types 
    • BB-8 various arm parts × 3 types 
    • BB-8 & R2-D2 storage box opening / closing re-use working parts × 1 type 
    • water transfer type decal × 1 
    • marking seal × 1

    RM93.60
    img
    SAVE RM71.80

    [Star Wars] 1/72 First Order Special Forces Tie Fighter

    From "Star Wars: the force Awakens", the first order special forces tie fighter is making its way to the band a I Star Wars plastic BAN203219 lineup!
    Utilizing CG prop modeling, every small detail in this 1/72 scale BAN203219 are reproduced accurately to scale.
    Two view ports are included, one clear, and one utilizing the cockpit frame. Use the included laser effect parts with moveable turrets and the display base resembling the Jake desert to recreate your favorite scenes! set includes dedicated display base, laser effect parts, two viewports (clear and frame), and two 1/72 pilots (seated). water-transfer decal x1. Marking sticker x1. Instruction manual x1.

    RM72.00
    img
    SAVE RM51.80

    [Star Wars] 1/72 A-Wing Starfighter

    [Star Wars] 1/72 Modelkit A-Wing Starfighter

    [ INCLUDED ACCESSORIES ]
    • Dedicated display base x 1
    • Turbolaser x 1
    • Laser effect part x 2
    • 1/72 Pilot (seated) x 1
    • Landing gears x 1 set
    • Canopy x 2 types (frame & clear part x 1/clear part x 1)
    • Water-transfer decal x 1
    • Marking sticker x 1

    RM92.00
    img
    SAVE RM48.80

    [Star Wars] 1/144 U-Wing and Tie Striker

    [Star Wars] 1/144 U-Wing & Tie Striker

    [INCLUDED ACCESSORIES ]
    Dedicated display base x 2 (for U-Wing Fighter / for TIE Striker)
    Laser effect part x 2 (for U-Wing Fighter)
    Canopy x 2 types (for U-Wing Fighter)
    [clear part x 1 / frame part x 1]
    Pilot x 2 types (for U-Wing Fighter)
    Landing gears x 1 set (for U-Wing Fighter)
    1/144 Combat Assault Tank x 2
    1/144 Combat Assault Tank driver part x 

    RM83.00
    img
    SAVE RM716.00

    [Star Wars] PG 1/72 Millennium Falcon

    [Star Wars] PG 1/72 Millennium Falcon
    Estimate Arrival: September 2017


    "Millennium Falcon" which appeared in the memorable first work "Star Wars / New Hope" published in 1977,
    Bandai's best model brand "PERFECT GRADE" series embodying the ultimate appearance appeared.

    Thoroughly researched "1.7 m model for photography" with the theme of "complete reproduction", not only to shape the appearance,
    From the cockpit and the inside of the laser cannon, faithfully reproduce without any compromise. In the case of

    ● Inspiration for reproduction during the play - Obsession with Accurately Recreating the Millennium Falcon from the Movie -
    Thanks to Mr. Takahashi and Ms. Washimi of the researcher for two years coverage of local interview, shooting model,
    I thoroughly studied the "model for shooting 1.7 m".

    It reproduces all the information amount of the shooting model, 1/72 scale It is a large size of 482 mm total length, and the shooting model is thoroughly reproduced.

    ● Reproduction of higher order details - Reproducing the Finest Details -
    Of course not only the exterior but also the internal detail structure is made thoroughly.

    · Cockpit
    Reproduce the shape from the panel of the seat and the console part to the instruments on the wall.
    By organizing, the structural understanding of manipulating "Millennium Falcon" deepens.

    · Laser cannon
    Including gunner's seat and laser gun trigger inside.
    Besides, it covers a precisely reproduced 4-linked laser cannon.
    You can also experience the sense of distance between gunner and laser gun at battle.

    Nose
    Hole wall surface
    Not only the structure inside the hole, but also the various structures on the side of the cylindrical hole are reproduced without exception.
    In the case of
    Side detail
    We also pursue stereoscopic expressions by effectively dividing parts densely of side details.
    Tubes that run side-by-side and side-by-side are used in conjunction with independent parts to realize a shape that is closer to the shooting model.

    Central detail
    In the very intricate central part, we also grasp the exact shape in the interview and research on "Model for shooting 1.7 m".
    Faithfully reproduce complex structures.

    - Aircraft rear part / Around the duct
    Millennium Falcon top detail features dense details are being built in detail.
    The net part of the duct is a selection formula of plastic parts and etching parts, pursuing finer reproduction.

    * Light emitting gimmick - LED Light - Up Feature -
    Production of light that complements the impression in the play.
    That figure illuminated by light gives the illusion as if it is just about to fly away.

    * Sub-high speed engine
    In "PG 1/72 Millennium Falcon", I respected the first work and dare to reproduce with white LED.
    The distinctive belt-shaped engine part reproduces lighting like in the play by using light guiding parts.

    * Landing gear / Entrance
    Characteristic three legs are illuminated by LEDs, and the aircraft is supported with the powerfulness as in the play.
    By illuminating this place the parking condition can be reproduced.

    A dense mold is engraved into the elevation mouth,
    Even now it creates an atmosphere that Han solo is going down from there.

    *Cockpit
    Like the cockpit in the play, the characteristic rear panel lights up, reminding the scene in the play.

    [Contents of set] Main body, LED unit, Etching parts, Water transfer decal, Dedicated pedestal

    -----------------------------------------
    1/72 scale assembled plastic model
    Target age: 15 years old and over
    Main product material: PS / AS / ABS / PE
    *AAA batteries x 3 (sold separately) are required.
    *For fixing the battery lid, a Phillips screwdriver (sold separately) is required.
    *Scissors, pliers, instant adhesives etc. are required for etching parts to assemble the etching parts.

    RM1680.00
    img
    SAVE RM51.80

    [Star Wars] 1/72 Poe's X-Wing Fighter

    Back2Back

    Coenamed Black One, and made famous by Poe Dameron in the Star Wars movie, The Force Awakens, the T-70 X-wing fighter was the successor to the T-65B X-wing starfighter, manufactured by Incom-FreiTek for use by the New Republic Starfleet.
    More expensive and complex than the former T-65B, the T-70 featured advanced weaponry and proved more versatile than its predecessor, and was essential in both dogfights and capital-ship scale combat operations.
    Utilizing Bandai's trademark color injection molding techniques, Poe's X-Wing Fighter is faithfully reproduced in 1/72 scale.

    This X-Wing features opening and closing S-foils laser effect parts that can attach to the wings, a cockpit with 2 different canopy options, and display stand.

    Set includes Dedicated display base (x1), seated Pilot (x1), BB-8 (×1), RO-H2 (×1), Laser effect part (x2), Landing gears (x1), set Canopy(frame only x1 / clear part x1). Water-transfer decal (x1), Marking sticker (x1).

    RM92.00
    img
    SAVE RM71.60

    [Star Wars] 1/12 Captain Phasma

    [Star Wars] 1/12 Captain Phasma 

    [Accessory] 
    Dedicated display base x 1 
    Fuzzma exclusive blaster x 1 
    Hand parts x 6 types (weapon possession x 2 · flat hands x 2 · fists x 2) 
    cloak x 2 species (molded cloak x 1 · cloth cloak x 1) 
    Line seal for cloak x 1 
    water transfer type decal x 1 
    marking seal x 1

    RM168.00
    img
    SAVE RM42.80

    [3in1] Star Wars Vehicle Model Series - 001, 002 & 003

    • (3 in 1) Star Wars Vehicle Model 001,002 and 003 (Star Destroyer, X-wing,Poe X-wing)
    • Package inclues:
    • 1 x [Star Wars] Vehicle Model Series 001 Star Destroyer
    • 1 x [Star Wars] Vehicle Model Series 002 X-Wing Starfighter
    • 1 x [Star Wars] Vehicle Model Series 003  Poe's X-Wing fighter

    RM65.00
    img
    SAVE RM11.30

    [Star Wars] Vehicle Model Series 004 - First Order Tie Fighter Set

    [Star Wars] Vehicle Model 004 First Order Tie Fighter Set

    Length: 56.9mm each
    Marking stickers replicate the Special Forces TIE Fighter's distinctive red body color.
    Accurate details condensed into a compact size.
    Includes a display base. Can be displayed individually as well.

    RM24.60
    img
    SAVE RM11.30

    [Star Wars] Vehicle Model Series 006 - Millennium Falcon

    [Star Wars] Vehicle Model 006 Millennium Falcon

    Length: 99mm
    Features the early Millennium Falcon’s signature round sensor dish.
    Retracted landing gear can be seen in three spots on the undercarriage.
    Includes a display base.

    RM24.60
    img
    SAVE RM11.30

    [Star Wars] Vehicle Model Series 007 - Tie Advanced x1 & Fighter Set

    [Star Wars] Vehicle Model 007 Tie Advanced x1 & Fighter Set

    Length: 44mm
    A two-vehicle set including TIE Advanced x1 and TIE Fighter.
    Features incredible detail.
    Includes a display stand.

    RM24.60
    img
    SAVE RM56.70

    [Star Wars] 1/72 Red Squadron X-Wing Starfighter

    [Star Wars] Red Squadron X-Wing Starfighter
    • Height approx 86mm
    • In marking seal, reproduce the characteristic line of the X-wing starfighter.
    • That is characteristic wing of the X-wing starfighter is possible deployment.
    • Display base is included

    RM123.00

    Showing 21 - 50 of 51 products