Price Clear







Showing BANDAI product(s)

Showing 241 - 270 of 3150 products

img
SAVERM9.90

[30] SD Sangoku Soketsuden - Gan Ning Crossbone Gundam

SD Gundam Sangoku Soketsuden - Gan Ning Crossbone Gundam

RM32.00
img
SAVERM9.90

[31] SD Sangoku Soketsuden - Da Qiao Gundam Artemie / Xiao Qiao GN Archer

SD Sangoku Soketsuden - Da Qiao Gundam Artemie / Xiao Qiao GN Archer

RM32.00
img
SAVERM19.90

[012] HGBC:R 1/144 Mass Production Type Zeonic Sword

A gigantic sword that can be used as a custom weapon for your "ZEON" model kits. This kit shares some of its mold from the HG Astray Blue Frame Second L's Tactical Arm unit. The sword also has some transformation gimmick that deploys some of its forms for different weapon use.

The mold of the same weapon also appeared in HGBD:R 1/144 nu-ZEON Gundam which is molded in red and gold, and embedded with a Zeon sigil in the middle part

[ACCESSORIES]
-Pieces to build Zeonic Sword
-2 Support arms
-Stand
*Gundam is not included

RM34.00
img
SAVERM14.90

[011] Haropla Zakrello Haro

Haro returns in its another cute form! This time, Haro cosplays as a Zakrello, a prototype mobile armor from the Mobile Suit Gundam TV series which was used by the Zeon forces during the One Year War.

This Haro is equipped with Zakrello's Sickle weapon on both of its arms, and installed with a booster pod for space use mobility.

-As a halo custom variation following [Ball Halo], [Zacero Halo] has appeared!

-Equipped with a sickle and booster inspired by the Zion army's large MA Zacero.

[accessories]
* Exclusive pedestal x 1
* Foil seal x 1

RM30.00
img
SAVERM131.40

MG 1/100 Wing Gundam Zero EW Ver. Ka

? From [New Mobile Report Gundam W Endless Waltz], Wing Gundam Zero EW Ver.Ka has appeared under the full supervision of Mr. Hajime Katoki!
? Bandai Spirits has announced the release of the new Wing Gundam Zero EW in Version Ka form! 
? This kit will be packed with amazing detailing and of course, decals. 
? Specially designed by Katoki Hajime himself, the kit will offer variety of new molded parts compare to its previous MG version that was released back in 2004.


Accessories included / Package Content: 
? Twin Buster Rifle x1
? Beam saber x 2
? Shield x 1
? Pedestal x 1
? Foil seal x 1
? Water transfer type decal x 1

RM198.00
RM198.00 Add to cart
img
SAVERM13.10

[OP-08] SD Gundam Cross Silhouette Silhouette Booster [Green]


-Green lineup in [Expansion parts set] of SDCS that expands the range of play!
-High and low head can be customized by assembling to existing frame!

[accessories]
  • Hand parts x 1 set
  • Frame custom parts x 1 set
  • Gym parts x 1 set
  • Foil seal x 1

RM22.80
img
SAVERM23.90

[015] SD Gundam Cross Silhouette Earthree Gundam (SD)

Earthtree Gundam from "Gundam Build Divers Re: RISE," gets an SD Gundam Cross Silhouette kit from Bandai! He features a core Gundam form and external armor parts that attach easily. Get yours today!

[Includes]:

  • Rifle
  • Shield
  • Foil stickers for markings

RM48.00
img
SAVERM45.80

[Star Wars] Star Wars: The Last Jedi (Clear Vehicle Set)


This transparent model set of the vehicles seen in "Star Wars: The Last Jedi" includes the Millennium Falcon, Resistance X-Wing, Poe's Boosted X-Wing, and AT-M6.

Product Features
  • 3.94 inches (10cm)
  • Made of plastic
  • Multiple scales
  • From Star Wars: The Last Jedi 
  • Molded in clear plastic
  • Instructions may or may not include English translation

Box Contents
  • Pieces to build
    • Millennium Falcon
    • Resistance X-Wing
    • Poe's Boosted X-Wing
    • AT-M6
  • 3 Display bases
  • Water decals

RM98.00
img
SAVERM27.90

[Fate Grand Order] 04 Master/Female Protagonist

-From [Fate / Grand Order], the female protagonist, who is the player's alternation, has been added to the Petit Ritsu series!

-A colorful and easy-to-assemble kit using color plastic. Simple parts configuration allows easy assembly even for beginners.
-3 head and body, the character's characteristic silhouette line remains as it is, and it is a cute deformation without breaking the impression.
-Possessing facial expression without breaking the proportions by moving the upper body.
-The right hand spell is reproduced with a sticker. Display with a distinctive pose by changing the wrist.
-Includes smile parts for Mash that can be attached to [Petittsu Shielder / Mash Kyrielight] (sold separately).
-Comes with a dedicated pedestal inspired by characters.

[accessories]
* Hand grip (right) x 1
* Span (right) x 1
* Span (left) x 1
* Mash smile expression parts x 1
* Base x 1
* Kinus seal x 1
* Foil seal x 1

RM56.00
img
SAVERM11.90

[019] HGBD:R 1/144 Mercuone Weapons

HGBD:R 1/144 Mercuone Weapons
  • From ~Gundam Build Divers Re:RISE~, the protagonist special underwater battle type weapon appears.
  • You can build large size equipment with items related to Core Docking Custom. 
  • In addition, HG model kits are also compatible.
  • ***Gundam and Action Base is not included.

RM24.00
img
SAVERM56.70

[Kamen Rider] Figure-rise Standard Kamen Rider Kuuga Mighty Form

Release Date: Mar 2020
Estimate Delivery Date: May 2020

-From [Kamen Rider Kuuga], a mighty form that allows you to experience the action of Kuuga appears in [Figure-rise Standard!

-Thorough reproduction of reinforced mighty kick with unique joint mechanism.
-A special range of motion has been developed and installed on the waist to reproduce the landing pose after a somersault or kick. It is possible to reproduce not only kick actions but also all action scenes in the play.
-Knee joint is movable until calf and thigh contact.
-Hip joint rotates about 120 degrees. The toes are also movable.
-Gold parts are reproduced by plating.
-Seven types of hand parts. In addition to left and right hand grips, left and right hands, left and right transformation, right and left hands for thumbs up are also included.
-Includes display pedestal and kick flame effect.

[accessories]
  • Foil seal x 1
  • Fire effect parts x 1
  • Grasping hands (left and right) x 1 each
  • Span (left and right) x 1 each
  • Makeover (left and right) x 1 each
- Sam"e;s up (right) x 1
  • Display base x 1

RM135.00
RM135.00 Add to cart
img
SAVERM17.90

Entry Grade Kamen Rider Zero-One Rising Hopper

- Kamen Rider Zero One Rising Hopper from [Kamen Rider Zero One] appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

- It is fun to assemble an armor into the suit.
- With a small number of parts (27 parts) and a runner arrangement that makes it easy to imagine the finished form, even those who make a plastic model for the first time can assemble quickly!
- Reproduce the difference in suit texture with special processing. Experience the precision of a plastic model!
- No glue or tools required! Easy assembly possible with snap fit and touch gate!

[accessories]
* Runner x 3
* Instruction manual x 1
* Seal x 1

RM42.00
img
SAVERM47.80

[068] Figure-rise Standard Build Fighters Try Fumina Hoshino

Release Date: September 2020
Arrival Date: October 2020

- From [Gundam Build Fighters Try] comes a figure-rise series of Fumina-senpai, who loves Gundam and Gunpla from the bottom of her heart!

- The hoodie is removable.
- Three facial expressions are included. You can reproduce a shy face and a surprised face.
- The hand parts come with a grip and an open hand.
- Fumina color bubble wrap that can be displayed together is also included.

[accessories]
- Facial expression parts x 3
- Wrist parts (left and right) x 2 each
- Petit bubble guy x 1
- Foil seal x 1
- Water transfer type decal x 1
- Exclusive pedestal x 1

RM96.00
img
SAVERM119.50

[235] HGUC 1/144 Bound-doc

Release Date: September 2020

Arrival Date: October 2020

A large mobile armor with a total height of about 190mm from [Mobile Suit Z Gundam] is now available in the HG latest format
Express the characteristic coloring with molding color
The characteristic skirt structure is reproduced by the calculated parts composition and color coding

[Accessories included]
- Beam Rifle x 1
- Beam saber x 1
- Diffusion mega particle cannon x 1
- Exclusive pedestal x 1
- Foil seal x 1

RM180.00
RM180.00 Add to cart
img
SAVERM54.70

[Dragon Ball] Figure-rise Standard Bardock

-From [Dragon Ball Z], Goku\'s father Bardack is a plastic model!

-Reproduces the charms of Burdaq, such as the cheek cross-scratch and rugged expression.
-Equipped with a muscle build system that reproduces muscle parts by shaping and dividing!
-Reproduce famous scenes and special technique poses with high range of motion and attached effect parts.
-The effect using clear parts reproduces the released state and the accumulated state.
-Two facial expressions are included: [Normal] and [Scream].
-Two types of hand parts are included on both the left and right sides!

[accessories]
* Expression parts x 2 types
* Hand parts: Left hand x 2 types Right hand x 2 types
- Special Move Effect x 2
- Base for Special Move Effect x 1
* Foil seal x 1

RM125.00
RM125.00 Add to cart
img
SAVERM67.70

[SAKURA WARS] HG 1/20 Kobu-kai (Sumire Kanzaki Type)

-From [Sakura Wars 2] released in 1998, Hanagumi Top Star Sumire Kanzaki\'s Mitsutake and Kai appeared in HG!

- equipped with a gimmick that can open and close the boarding hatch. It is possible to board the included figure in the cockpit.
-A gimmick that can move the eye camera to the left and right to express a natural line-of-sight movement that matches the posing.
- the original of the internal structure is publisher supervision, adding a new interpretation of the plastic model unique.
-Reproduce details such as details and gimmicks.

[accessories]

* Foil seal x 1
* Jewel seal x 1
* Nylon tube x 1
* Lead wire x 1
* Tetron seal x 1

RM142.00
RM142.00 Add to cart
img
SAVERM53.70

[Star Wars] 1/72 X-Wing Fighter (The Rise Of Skywalker)

From "Star Wars / Dawn of Skywalker" comes 1/72 X Wing Fighter!

  •  Modeled R6-D8 with new parts.
  •  Reproduce the aircraft color in the play.
  •  Comes with a black display pedestal inspired by outer space.

Accessories
  •  Exclusive display base x 1
  •  Pilot parts (sitting) x 1
  •  Landing leg x 1 set
  •  Canopy x 2 types (Clear parts x 1, Frame parts x 1)
  •  Laser effect parts x 1 set
  •  Droid parts x 1
  •  Water transfer decal x 1
  •  Marking seal x 1

RM108.00
RM108.00 Add to cart
img
SAVERM25.90

[026] SDBD:R EX Valkylander

-A Valky Lander power-up machine [Ex Valky Lander] has appeared from [Gundam Build Divers Re: RISE], which is scheduled to be released on Gundam Channel on April 9, 2020!
-Sword and shield included.

[accessories]
* Sword x 1
* Shield x 1
* Foil seal x 1

RM52.00
img
SAVERM46.80

[231] HGCE 1/144 Infinite Justice Gundam

-[Infinite Justice Gundam] comes up in the latest HG format from [Mobile Suit Gundam SEED DESTINY]
-The lower back has an internal structure that enables expansion of the range of motion and holding of poses.
-The two wings of Fatum-01 are equipped with movable gimmicks so that they can warp up and reproduce the silhouette of aerial battle.
-A gimmick for expanding the range of motion of the hip joint has been introduced to reproduce the pose specific to the SEED series.
-Includes various beam effects.
-Reproduce each form of beam carry shield. Beam effect and beam shield are reproduced with clear parts. Lead wire included.

[accessories]

* High energy beam rifle x 1
* Beam saber (single state) x 2
* Beam saber (connection state) x 1
* Beam carry shield x 1
* Beam shield effect x 1
* Beam boomerang effect x 1
* Griffon beam blade effect x 2
* Griffon beam 2 blade effect x 2
* Foil seal x 1
* Lead wire x 1

RM85.00
img
SAVERM155.40

RG Multipurpose Humanoid Decisive Weapon, Artificial Human Evangelion Proto Type-00 DX Positron Cannon Set

-From the RG Evangelion series, which pursues realism as an android, a lineup of prototype zeros!
-The second in the pursuit of the action pose reproduction of Evangelion with RG. Movable spine and scapula, interlocking of each part armor, gimmick that armor follows when a twist is added to the arm, etc., further considers and expresses Evangelion Zero as a [real grade].
-You can assemble before and after renovation by selecting parts.
-Reproduce the color of the head by fine parts division.
-The equipment that appeared in [Evangelion New Theatrical Version: Introduction] can also be assembled by selection.
-Strongly linked with the first RG Evangelion! Includes Operation Yashima [G-type equipment] [Positron rifle].
-7 hand parts each for left and right, 1 umbilical cable, 2 progressive knives and 1 pallet rifle are also included.

[accessories]

* Positron rifle x 1
* G type equipment for the first machine x 1
* Parts x 1 after repair
* Progressive knife x 2 types (normal / retracted)
* Pallet rifle x 1
* Hand parts (left and right) x 7 types each
* Umbilical cable x 1
* Realistic decal x 1

RM234.00
RM234.00 Add to cart
img
SAVERM104.60

RG Multipurpose Humanoid Decisive Weapon, Artificial Human Evangelion Proto Type-00

-From the RG Evangelion series, which pursues realism as an android, a lineup of prototype zeros!
-The second in the pursuit of the action pose reproduction of Evangelion with RG.
-Consideration and expression of the Evangelion Unit 0 as a [real grade] such as the movement of the spine and scapula, the interlocking of each armor, the gimmick that the armor follows when a twist is added to the arm, etc.
-You can assemble before and after renovation by selecting parts.
-Reproduce the color of the head by fine parts division.
-The equipment that appeared in [Evangelion New Theatrical Version: Introduction] can also be assembled by selection.
-7 hand parts each for left and right, 1 umbilical cable, 2 progressive knives and 1 pallet rifle are also included.

[accessories]

* Parts x 1 after repair
* Progressive knife x 2 types (normal / retracted)
* Pallet rifle x 1
* Hand parts (left and right) x 7 types each
* Umbilical cable x 1
* Realistic decal x 1

RM165.00
RM165.00 Add to cart
img
SAVERM83.60

[SAKURA WARS] HG 1/24 Spiricle Striker Mugen (Azami Mochizuki Type)

-From [New Sakura Wars] to [Plastic Fighter / Mugen] in detail, the first plastic model!

-Equipped with an extension gimmick that enables expansion and contraction at the joints of the hands and feet. The range of action poses expands!
-The settings inside the cockpit are faithfully reproduced.
-Equipped with a cockpit hatch opening and closing gimmick!
-Includes character figure on board

[accessories]
* Sword x 1
* Shield Crow x 1
* Foil seal x 1
* Jewel Seal x 1
* Water transfer type decal x 1

RM168.00
RM168.00 Add to cart
img
SAVERM47.80

HG 1/144 RX-78-2 Gundam [Beyond Global]

-Gunpla 40th Anniversary! The [RX-78-2 Gundam] designed by Kunio Okawara is integrated with the technology cultivated in the [HG Series]!

-Pursue [Beautiful posing] and [Mobility and proportions]. A number of gimmicks are provided throughout the body that allow for natural poses.
-A design that reexamines the design of First Gundam and pursues it to the limit as [BEYOND GLOBAL].
-Adopting forward bending and swinging movable structure on the body. The neck axis is also movable back and forth.
-A joint that bends inward at the base of the thigh to achieve a more human-like pose.
-Independent movement of the wrist allows free movement of the jointed shield.
-The wrist block can be moved as a separate part with a ball joint, and can be used to produce powerful movements such as gripping a fist.
-The hip joint swings and moves greatly forward. In addition, the rear skirt expands greatly, allowing it to move backwards.
-The block on the side of the chest is responsible for the movement of the part corresponding to the scapula.

[accessories]
Beam rifle x 1
Shield x 1
Beam saber x 2
* Foil seal x 1

RM72.00
img
SAVERM11.90

30MS Minutes Sister Water Transfer Decals Vol.2

This is a sheet of water-slide decals, dry transfers, or self-adhesive stickers for use in detailing anime or science-fiction kits.

RM24.00
img
SAVERM9.90

Entry Grade Doraemon

-Create your favorite hero with your hands! Doraemon appears in the introductory series [ENTRY GRADE] for all inexperienced plastic modelers!

-Because it is a touch gate, parts are `petit \'by hand! `!
-With a small number of parts (13 parts), even the first time to make a plastic model can be assembled quickly!
-Color coding of each part is reproduced by parts!
-No adhesive or tools required. Instructions are colored for easy viewing.

[accessories]

* Runner x 3
* Instruction manual x 1
* Seal x 1

RM38.00
img
SAVERM101.50

HG 1/300 Gran-Saurer

Release Date : Jul 2020
Estimate Delivery : Aug 2020

-Gran Zaurer from [Hot Blood Strongest Gozaurer] to HG!

-Gozaurer Design Works\'s supervised by Mr. Takahiro Yamada recreates Gozaurer\'s male form just by assembling.
-Includes King Blade (approximately 300mm in length), Big Lancer, and Tricera Shield.
-[King Gozaurer] can be reproduced by combining with [HG 1/300 Gozaurer] and [HG 1/300 Magna Saurer] (both sold separately).

[accessories]

* Big Lancer x 1
* Tricera shield x 1
* King blade x 1
* Combined parts for King Gozauler x 1 set
* Foil seal x 1

RM210.00
RM210.00 Add to cart
img
SAVERM30.90

[02] Plannosaurus Triceratops Dinosaur Plastic Model

Bandai\'s new dinosaur plastic model brand, \"Plannosaurus,\" debuts with the fa-favorite Triceratops! This lineup encourages you to learn about dinosaurs by assembling them yourself from the skeleton out! Begin with the \"skeletal build,\" assembling the dinosaur\'s skeleton piece by piece; the \"dinosaur build\" then allows you to attach the outer skin parts to the skeleton. Nippers and glue are not required, so they\'re easy to assemble, too!
The Triceratops features details like the characteristic structure of its forelimbs, with the back of the \"hand\" facing outwards; the unique teeth common to herbivorous dinosaurs are also reproduced. The fur-like projections along its back have been carefully recreated based on current scientific theory. Its mouth opens and closes, and the forelegs, hind legs, neck and other parts are all movable so you can display it in your favorite pose. This lineup is sure to be highly popular, so order yours today, before they go extinct!

[Includes]:

* Stickers
* Display base

RM56.00
img
SAVERM15.90

[Pokemon] Plastic Model Collection Select No. 45 Series Gengar

? Ghost type Pokemon ???? [Gengar] has appeared from the select series!
? In addition to touch gate and snap fit technology, seals have been greatly reduced, making it easy to assemble!
? Color reproduction is perfect even with simple parts!
? Even small limbs can move joints.
? Three kinds of facial expressions can be selected by selective assembly.


Accessories / Package Content: 
? Facial expression parts x 2
?  Tongue parts x 2
?  Foil seal x 1

RM44.00
img
SAVERM89.60

[DIGIMON SERIES] Figure-rise Standard Black Wargreymon (AMPLIFIED)



- From [Digimon Adventure 02], [Black War Greymon] is now available as Figure-rise Standard Amplified!
- Reproduce the ultimate Dark Tower Digimon with silver and gold molding colors and colors based on black.
- Equipped with an original gimmick on the wing parts that can be connected to the back. Realized a structure that expands like a wing so that the figure equipped on the back can be seen more clearly.
- It is also possible to remove the wing parts and replace them with the arms.
- New effect parts with the image of slashing are included to reproduce the image in the play.

[Accessories included]
- Dramon killer x 2
- Wing parts set x 1
- Effect parts x 2
- Foil seal x 1

RM168.00
RM168.00 Add to cart
img
SAVERM56.70

[Demon Slayer] Plastic Model Tanjiro Kamado

[Demon Slayer] Plastic Model Tanjiro Kamado
-The main character of the TV anime [Devils Blade] [Sumijiro Kamon] is made into a plastic model with the technology of the BANDAI SPIRITS Hobby Division!
-A non-movable model with a dynamic pose that holds a Japanese sword with an overall height of about 120 mm.
-Face parts by [Insert molding] unique to Bandai Hobby Center are included.
-Includes [Painted Haori] parts with color reproduction.

[Accessories included]
- Hirinto x 1
- Seal x 1
- Instruction manual x 1

RM99.00

Showing 241 - 270 of 3150 products