The Nu Gundam Heavy Weapons System, from the CCA-MSV series of alternate versions of Mobile Suits from the film 'Mobile Suit Gundam: Char's Counterattack', joins the HGUC lineup. Heavy Weapons System includes: additional armor for the Nu Gundam (chest, front and rear skirts, and large leg thruster units), a Hyper Mega Rifle, and a large shield with rocket launchers. Missile pod units on the chest armor pivot up and down. Fin Funnel unit can be disassembled into individual folding plates. Heavy Weapon System can be removed for display as a standard Nu Gundam. It includes Hyper Mega Rifle, large shield, beam rifle, Hyper Bazooka, normal shield, 2 beam sabers, and 6 Fin-Funnel plates.

• Play value packed with a large number of the original gimmick.
  
• To Raiser in Gundam + Raiser.
  
• Saber mode of GN Sword II is reproduced in clear plastic.
  
• It is equipped with an SD of original gimmick (Bird mode Fighter mode Rider mode) three
  
• Width of play further expand!
  
• Accessories: GN Sword II × 2, GN shield × 2, GN Sword II beam saber mode for parts × 2
  

Gundam decal sheet recommended for use on HG Gundam Exia, Dynames and Kyrios kits.

Gundam decal sheet recommended for use on HG Over Flags, Union Flags and Union Flags Custom II Kits

• The first MG from Mobile Suit Gundam: 00, this long-awaited kit delivers on every level! 
  
• Thanks to advances in kit design, the inner frame moves along with the outer armor to recreate the Exia's unique range of motion! 
  
• GN Condensers on the arms/chest/legs are double-layered, clear plastic to reproduce the look of real lenses, giving it a more accurate appearance.
  
• Each GN Code piece throughout the body of the Exia is recreated in clear plastic to mimic the look of the Suit in the anime! 
  
• Includes custom marking seals and Gundam Decals.
  
• Includes GN Code decal sheet.
  
• GN drive completely reproduced. As with in the anime, the GN Drive can be removed
  
• stand included to hold the Drive while it's not with the Exia.
  
• Accessories: GN Sword x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2,
  
• GN Beam Saber x2, GN Shield x1, 1/100 Setsuna F. Seiei figure x1

• MG RGM-79(G) GM Ground Type
  

• 1/144 Gundam decal sheet recommended for use on HGUC Zaku, Zaku II, Neo Zeong kits.
  

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

The best thing about this disturbingly orange and green mecha is the fact that when it"e;s completed, it can transform from Mobile Suit mode to Mobile Armour mode. A custom display stand for showing it off is included as well. All parts snap together and are molded in colour; polycaps ensure smooth-moving joints. Foil stickers for details are included.

• RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  
• New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  
• Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  
• Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  
• Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  
• Bring out the real attraction [of multi-colored armor.
  
• Launch of Kira Yamato, sitting figures included.
  
• Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)
  

MSM-04 Acguy

• Here's Char's Zaku II, getting a "Ver. 2.0" update more than a decade after its first MG kit release.
  
• This kit features a completely revamped inner frame construction that allows for even greater range of articulation and realistic movement; it's even able to be posed kneeling on one leg as seen in the show!
  
• Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly.
  
• Weapons include a Zaku machine gun, Zaku bazooka, and a heat hawk. Two types of blade antennas are included along with a lift vehicle to bring the included 1/100-scale standing Char Aznable (molded in red) to the cockpit.
  

The very-popular Qubeley is now available in the Mk-II style, which is basically just a color variation from the original release. You also get that cool Neo Zeon mark on the shoulder. Molded in color, snap assembly. Poly-caps for the joints.Technology & Combat CharacteristicsIn terms of technology and performance the two Qubeley Mk-II units were virtually identical to the original Qubeley. The Qubeley Mk-II's stored an additional two remote funnel weapons in the tail binder over its predecessor, giving the mobile suit a total of twelve remote weapons. The one noticeable difference between the two identical Qubeley Mk-II's is the different color schemes. The first AMX-004-2 Qubeley Mk-II which featured a dark purple color scheme and a hilted beam saber. The second unit, AMX-004-3 Qubeley Mk-II, was largely identical to the first, but instead had a red-and-yellow paint scheme. Of course since the Qubeley Mk-II mobile suits were designed for Newtype pilots they were outfitted with the same miniaturized psycommu system of the first Qubeley so that the pilots may control the remote weapons with their Newtype abilities. One major differences between the two mobile suits psycommu systems, was that AMX-004-3 Qubeley Mk-II would have a new version of the psycommu system installed that would allow its pilot, through the use of a psycowave amplifying headset, to remote-control the mobile suit from outside the cockpit. The head parts of the Qubeley MK-II features a psywave sender/reciever, and also features a system that gives feedback to the pilot, a system never seen in other Newtype use MSs. The head is also crafted to act as a stabilizer in flight, thus the odd shape. The shoulder armor of the Qubely MK-II features 12 thrusters to give it exceptional mobility and speed. The binders also act as shields. They also help the Qubeley MK-II'S AMBAC system. The fingers of the MK-II also mount the same psywave sender/reciever system as the head, and can directly give the funnels instructions. The legs of the MK-II are used as landing gear and for walking. They feature thrusters as standard equipment that allow the MK-II to maneuver in space and in the atmosphere.Sources:wikipedia

• Hyper Mode Master Gundam (MG)
  

Dimension: 10 cm x  15 cm 

Gundam GP02A (SD) (Gundam Model Kits)

• This fantastic little super-deformed version of Verde Buster Gundam comes in colored plastic runners with polycaps for joints. 
  
• With parts that snap together easily, it requires no cement or paint to complete, but you will need to paint it if you want it to be accurate. It comes with all the weapon loadouts as seen in the "Gundam Seed Stargazer" Original Net Animation series. 
  
•  A display base is not included, but you can use the one that comes with BB #280 Force Impulse Gundam
  

- Accessories: effect sea level - Item Size/Weight : 31.1 x 19.2 x 7.3 cm / 323g

• Comes with a funnel effect in part, to reproduce conditions in space injection funnel. 
  
• Detachable funnel in standby state, expanded state, a reproduction of a replacement. 
  
• Mono moving head from side to side. Shoulder swing mechanism is adopted. 
  
• Vernier Apojimota, give accurate details of the internal mechanism and so on. 
  
• Supplied weapons, beam rifle, shield, and saber.
  

Shanks' flag ship joins a new series of 6" model ships from "One Piece". Its compact size makes it easy to display and requires no tools to assemble. Through the use of pre-colored plastic and stickers there's no need for paint. You can re-create the ship with sails unfurled or without sails. Includes a ocean surface effect part. Compatible with the action base 2.

Accessories : wave effect

A 1/144 model of Izubuchi's mid 2000s Hi-Nu Gundam rendition featuring slimmer proportion and modern design aesthetic. From the novel, "Char's Counter Attack Beltorchika Children," the Hi-Nu possesses a large number of differences from the Nu Gundam including its bright blue coloring and differing weapon mount configuration. 

• 9th RG is burdened with the name of the [justice], Justice Gundam! RG elaborate detail to be Usually Mokuseyo 
• Beam boomerang tip of the shoulder ... The shoulder is the first time a kit is removable, reproduce the beam boomerang. 
• The exchange of palm (sold separately) ... RG RG compatible with Freedom Gundam Freedom Gundam, Machine can be reproduced in the play scene 2 holding hands. 
• Connection for the stability of the body ... and ideas for the play Fato~umu -00 stable, equipped with a locking mechanism. In addition, parts are also included support for the display of state (horizontal) -00 Fato~umu during deployment. 
• ... Lifter connecting portion is detachable reproduction, and the lifter body gimmick it can be stored back to the center. In addition, each battery, and the movable nozzle section. 
• Equipped with a slide mechanism to reproduce the features of its own ... RG lifter by actual historical research. The aircraft during deployment Slide the left and right, extended width. By this gimmick, to shoulder a gun without a detachable part of Fato~umu -00 It is possible to move. 
• ZAFT forces based on the GAT series was taken from the Union ZGMF-X09A Justice Gundam ... MS was developed. In the sister machine of Freedom Gundam, machines with N jammer canceller. - Accessories: beam saber, beam boomerang, shield, beam rifle, palm (right), Rifle hand grip (right) ( This is a machine translation. Please allow for possible misinterpretations in the text. ) 
• Item Size : 31 x 19 x 8 cm