Price Clear







Star wars Model Kits

Showing 31 - 60 of 61 products

img
SAVERM57.50

[Star Wars] 1/72 Resistence X-Wing Fighter

  • X-Wing Fighter Resistance specification 1/72 scale that appeared during the "awakening of Star Wars / Force" drama.
  • Possible desorption of BB-8 to support adjustment and pilot of the aircraft.
  • Airframe side of the line is to reproduce the color-coded in the molding color, other fine line using the water transfer type decals and marking seal.
  • Canopy and those of the all-clear material, two is supplied only frame.
  • to reproduce the detail over the details by verifying the thorough article condensation in the 1/72 scale.
  • Distinctive wings reproduce the opening and closing of the same in the play.
  • Chakuyukaashi comes the landing gear to reproduce the implantation and maintenance state.
  • Laser cannon can reproduce the figure decided to attack by inserting the laser effect to the wing tip.
  • Display base desert motif of Jakhu of aircraft. Based multiple connection possible with the joint parts.
  • The same scale of the pilot (seated type upright type) and BB-8 is included.
  • [Accessories] dedicated display case x 1, pilot figures x 2 (seated x 1, upright x 1), BB-8 x 1, x 2 canopy species (Clear parts x 1, frame parts x 1), effect parts x 2 , Chakuyukaashi x set
  • [Commodity content] moldings x 4, water transfer type decal x 1, marking seal x 1, assembly instructions x 1

RM98.40
img
SAVERM45.50

[Star Wars] 1/72 TIE Advanced x1

This item is an injection-plastic kit of a science-fiction/anime item.  

Here is Darth Vader's TIE Fighter, now in snap-fit Bandai quality plamo goodness!  This amazing kit includes two Darth Vader figures--a seated one to pilot the vehicle, and a standing one for display alongside it.  Two types of removable display windows are included for the cockpit, and a Death Star panel display base will show this wicked machine off in style!  Laser effects are also included. Don't miss out on this iconic fighter!  

Release Date: Nov 2014

To detail reproduced in 1:72 scale Thai Advanced x1 Darth Vader was boarding in [episode 4].

Set include : Death Star surface base × 1, Laser effects × 2, Darth Vader figure × 2 (seated upright × 1 · × 1), (Clear parts × 1 · frame parts × 1) 2 kinds of view boat ×

Full length: approx 85mm.

This is pre-painted plastic model kits and require snap-fit assembly only..

RM98.40
img
SAVERM45.50

[Star Wars] 1/48 AT-ST

This item is an injection-plastic kit of a science-fiction/anime item.  

The AT-ST -- or the All Terrain Scout Transport -- is joining Bandai's lineup of exciting Star Wars kits! Add a little more mechanical flair to your Star Wars collection with the Empire's "chicken walker." You might want to keep this one away from the Ewoks.

This snapfit kit consists of parts molded in grey and brown plastic, and includes a Wookiee figurine, pilot figurine, red effects parts, and display terrain base. Also included are markings as both stickers and water-slide decals.

RM98.40
img
SAVERM45.50

[Star Wars] 1/72 Tie Fighter

This item is an injection-plastic kit of a science-fiction/anime item.  

Able to operate both in space and in planetary atmosphere, the TIE fighter was the Empire's most easily recognizable spacecraft. This snapfit kit consists of parts molded in grey, black, and clear plastic, and includes two pilot figurines, green effects parts, and a flexible display base. Also included are markings as both stickers and water-slide decals. 

RM98.40
img
SAVERM45.50

[Star Wars] 1/48 Snowspeeder

  • At the Star Wars [Strikes Back Episode 5 / empire], three-dimensional in 1/48 scale Snowspeeder hero Luke Skywalker was boarding!
  • Condensed the details of detail in the 1/48 scale from the verification of thorough Prop (imaging model).
  • The replacement of parts, to reproduce the opening and closing state of air brake.
  • Snow Speeder can be reproduced to fire a laser gun with a laser effect.
  • Seating type figure of the same scale is two bodies included. Snowfield in the AT-AT a defeated power Harpoon (harpoon) parts of the host is also included.
  • Supplied base image the snowy field host. Based multiple connection is possible with the joint parts.

Accessories: Dedicated display base, laser effect parts x 2,1 / 48 figure x 2 species (pilot, gunner), canopy x 2 species (frame & clear parts, clear parts), Power Harpoon (harpoon) parts, air brake opening and closing reproduction parts four x 2

RM98.40
img
SAVERM75.85

[Star Wars] 1/144 Slave I

[Star Wars] 1/144 Slave I

  • Accessories: (road part of the selection formula) dedicated display-based, laser effect parts ? 2, Boba Fett figure ? 2 (upright-seated), carbonite frozen Han Solo figure, hangar hatch opening and closing reproduction parts two ? 2, apron / flight state reproduction for both wings cylinder parts two ? 2

RM152.00
img
SAVERM215.61

[Star Wars] 1/48 X-Wing Starfighter (Moving Edition)

  • This product is only sold in Japan currently.
  • Not many units available ~ hurry while stock lasts.
  • 3xAA battery required and sold separately.
  • [STAR WARS] 1/48 X-WING STARFIGHTER MOVING EDITION

RM372.00
img
SAVERM135.68

[STAR WARS] 1/144 Millennium Falcon (The Forces Awaken)

The Millennium Falcon was a Corellian YT-1300 light freighter used by the smugglers Han Solo and Chewbacca during the Galactic Civil War. It was previously owned by Lando Calrissian, who lost it to Solo in a game of sabacc.

Its aged appearance belied numerous advanced modifications to boost the ship's speed, weapons and shield, including a hyperdrive engine among the fastest in the entire galaxy, enabling it to outrunImperial Star Destroyers. It also included sensor-proof smuggling compartments, which were used during the rescue of Princess Leia Organa to evade Imperial stormtroopers. Afterwards, the Millennium Falcon saw further action when Solo chose to join the Rebels during the Battle of Yavin, where it was able to sneak up on Darth Vader'sTIE Advanced.

After Han was captured on Bespin, Lando took command of theFalcon once more to search for him, and later flew the ship at theBattle of Endor, where it entered the Death Star II and destroyed it from within. During this battle, the starship's circular sensor dish was knocked off as Calrissian piloted it through the Death Star's interior.

In addition to its renowned hyperdrive, which made the Falconboasted as the "fastest ship in the galaxy," the ship was equipped with a backup hyperdrive. Compared to the primary engine, it was much slower and often took several weeks or months to reach the nearest star system. It also had a dejarik table featuring creatures found throughout the galaxy.

At some point over the following thirty years, the sensor dish was replaced with a rectangular model.

RM188.10
img
SAVERM45.40

[Star Wars] 1/72 First Order Special Forces Tie Fighter

From "Star Wars: the force Awakens", the first order special forces tie fighter is making its way to the band a I Star Wars plastic BAN203219 lineup!
Utilizing CG prop modeling, every small detail in this 1/72 scale BAN203219 are reproduced accurately to scale.
Two view ports are included, one clear, and one utilizing the cockpit frame. Use the included laser effect parts with moveable turrets and the display base resembling the Jake desert to recreate your favorite scenes! set includes dedicated display base, laser effect parts, two viewports (clear and frame), and two 1/72 pilots (seated). water-transfer decal x1. Marking sticker x1. Instruction manual x1.

RM98.40
img
SAVERM11.30

[Star Wars] Vehicle Model Series 002 - X-Wing Starfighter

  • Height approx 86mm
  • In marking seal, reproduce the characteristic line of the X-wing starfighter.
  • That is characteristic wing of the X-wing starfighter is possible deployment.
  • Display base is included

RM24.60
img
SAVERM45.40

[Star Wars] 1/72 A-Wing Starfighter

[Star Wars] 1/72 Modelkit A-Wing Starfighter

[ INCLUDED ACCESSORIES ]
  • Dedicated display base x 1
  • Turbolaser x 1
  • Laser effect part x 2
  • 1/72 Pilot (seated) x 1
  • Landing gears x 1 set
  • Canopy x 2 types (frame & clear part x 1/clear part x 1)
  • Water-transfer decal x 1
  • Marking sticker x 1

RM98.40
img
SAVERM11.30

[Star Wars] Vehicle Model Series 003 - Poe's X-Wing Fighter

[Star Wars] Vehicle Model Series 003  Poe's X-Wing fighter

  • Length: 85mm
  • Marking stickers replicate Poe's X-Wing Starfighter's distinctive lines.
  • The X-Wing Starfighter's distinctive wings open and close.
  • Includes a display base.

RM24.60
img
SAVERM46.40

[3in1] Star Wars Vehicle Model Series - 001, 002 & 003

  • (3 in 1) Star Wars Vehicle Model 001,002 and 003 (Star Destroyer, X-wing,Poe X-wing)
  • Package inclues:
  • 1 x [Star Wars] Vehicle Model Series 001 Star Destroyer
  • 1 x [Star Wars] Vehicle Model Series 002 X-Wing Starfighter
  • 1 x [Star Wars] Vehicle Model Series 003  Poe's X-Wing fighter

RM61.40
img
SAVERM47.80

[Star Wars] 1/72 Tie Interceptor

[Star Wars] 1/72 Tie Interceptor 

[Accessory] 
Dedicated display base x 1 
Laser effect parts x 2 
1/72 pilot (seating) x 1 
view port x 2 types (clear parts x 1 - frame parts x 1) 
water transfer type decal x 1 
marking seal x 1

RM96.00
img
SAVERM11.30

[Star Wars] Vehicle Model Series 004 - First Order Tie Fighter Set

[Star Wars] Vehicle Model 004 First Order Tie Fighter Set

Length: 56.9mm each
Marking stickers replicate the Special Forces TIE Fighter's distinctive red body color.
Accurate details condensed into a compact size.
Includes a display base. Can be displayed individually as well.

RM24.60
img
SAVERM51.80

[Star Wars] 1/72 Poe's X-Wing Fighter

Codenamed Black One, and made famous by Poe Dameron in the Star Wars movie, The Force Awakens, the T-70 X-wing fighter was the successor to the T-65B X-wing starfighter, manufactured by Incom-FreiTek for use by the New Republic Starfleet.
More expensive and complex than the former T-65B, the T-70 featured advanced weaponry and proved more versatile than its predecessor, and was essential in both dogfights and capital-ship scale combat operations.
Utilizing Bandai's trademark color injection molding techniques, Poe's X-Wing Fighter is faithfully reproduced in 1/72 scale.

This X-Wing features opening and closing S-foils laser effect parts that can attach to the wings, a cockpit with 2 different canopy options, and display stand.

Set includes Dedicated display base (x1), seated Pilot (x1), BB-8 (×1), RO-H2 (×1), Laser effect part (x2), Landing gears (x1), set Canopy(frame only x1 / clear part x1). Water-transfer decal (x1), Marking sticker (x1).

RM92.00
img
SAVERM51.00

[Star Wars] 1/72 Tie Striker

From the movie Rogue One: A Star Wars Story comes a model kit of the TIE Striker!

Bandai used their color injection molding technology to create this model kit, so no painting or glue required! This space vehicle has been faithfully recreated in 1/72 scale and includes articulated 9-inch long solar panels and a bonus opening hatch.

This set includes a display stand, 2 laser effect parts, 2 view port options featuring clear plastic or exposed frame, and a seated pilot.
 
Features:
9.5 inches long (24.13cm)
Model Kit
1/72 scale
From Rogue One: A Star Wars Story
Color injected molding; no painting or glue required!
Features articulated solar panels and hatch with either clear plastic or exposed frame options!
Includes a scaled seated TIE pilot figure, 2 laser effects, and a stand

Contents:
1/72 scale TIE Striker model kit
Display stand
2 laser effect parts
2 view port options
Clear plastic
Exposed frame
Seated pilot figure

RM110.70
img
SAVERM11.30

[Star Wars] Vehicle Model Series 006 - Millennium Falcon

[Star Wars] Vehicle Model 006 Millennium Falcon

Length: 99mm
Features the early Millennium Falcon’s signature round sensor dish.
Retracted landing gear can be seen in three spots on the undercarriage.
Includes a display base.

RM24.60
img
SAVERM11.30

[Star Wars] Vehicle Model Series 007 - Tie Advanced x1 & Fighter Set

[Star Wars] Vehicle Model 007 Tie Advanced x1 & Fighter Set

Length: 44mm
A two-vehicle set including TIE Advanced x1 and TIE Fighter.
Features incredible detail.
Includes a display stand.

RM24.60
img
SAVERM43.80

[Star Wars] 1/144 U-Wing and Tie Striker

[Star Wars] 1/144 U-Wing & Tie Striker

[INCLUDED ACCESSORIES ]
Dedicated display base x 2 (for U-Wing Fighter / for TIE Striker)
Laser effect part x 2 (for U-Wing Fighter)
Canopy x 2 types (for U-Wing Fighter)
[clear part x 1 / frame part x 1]
Pilot x 2 types (for U-Wing Fighter)
Landing gears x 1 set (for U-Wing Fighter)
1/144 Combat Assault Tank x 2
1/144 Combat Assault Tank driver part x 

RM88.00
img
SAVERM53.70

[Star Wars] 1/48 Snowspeeder (1/144 Snowspeeder Included)

[Star Wars] 1/48 & 1/144 Snowspeeder

Comes with 1/48 Model Kit and also 1/144 Model Kit

From Star Wars: Episode V The Empire Strikes Back comes the Snowspeeder 1/48 & 1/144 scale set! This set comes with 2 Snowspeeders, one in the 1/48 scale and another in the 1/144 scale. You can use this set to create depth and dimension to your displays and dioramas. Display these along with the 1/144 AT-AT (sold separately) to mimic your favorite scenes from the movie!

This set includes one pilot and 2 dedicated display bases, 7 runners, a water slide decal, marking sticker sheet, and instructions. 

Features:
1/144 and 1/48 scales
Model Kit
From the Star Wars series
Featuring a model kit of 2 Snowspeeders in two different scales
Includes one pilot figure, 2 display bases, 7 runners, a water slide decal, marking sticker sheet, and instructions

Contents:
1/48 scale Snowspeeder parts
1/144 scale Snowspeeder parts
Pilot figure
2 display bases
7 runners
Water slide decal
Marking sticker sheet
Instructions

RM108.00
img
SAVERM69.70

[Star Wars] 1/72 Red Squadron X-Wing Starfighter

[Star Wars] Red Squadron X-Wing Starfighter
  • Height approx 86mm
  • In marking seal, reproduce the characteristic line of the X-wing starfighter.
  • That is characteristic wing of the X-wing starfighter is possible deployment.
  • Display base is included

RM110.00
img
SAVERM11.30

[Star Wars] Vehicle Model Series 009 - Jedi Starfighter

* The Jedi Starfighter as seen in "Star Wars Episode II: Attack of the Clones" joins the Vehicle Model series!

PRECISE DETAIL
* Highly detailed molding in a palm-sized scale.

ACCURATE FEATURES
* Hyperdrive Docking Ring is detachable!

RE-CREATE SCENES
* Display alongside the "1/144 Slave I Jango Fett Ver.” (sold separately) to replicate key scenes from the film!

[ INCLUDED ACCESSORIES ]
* Dedicated display base x 1

[ CONTENTS ]
* Sprue x 4
* Marking sticker x 1
* Instruction manual (printed on package)

RM24.60
img
SAVERM85.90

[Star Wars] 1/144 Slave I (Jango Fett's Ver.)

From "Star Wars Episode 2: Attack of the Clones", comes the infamous bounty hunter Jango Fett's Slave I!  Reproduce the shape of the Slave I through new parts for the cockpit and exterior. Set includes dedicated display base, display base part, cockpit hatch parts (open and close), and flight/parked cylinder parts. 


Contents:
- Runner x8
- Water slide decal x1
- Marking sticker sheet x1
- Instruction manual x1.

Model approximately 5" high and 5.25" wide.

RM141.70
img
SAVERM11.30

[Star Wars] Vehicle Model Series 010 - A-Wing Starfighter

[Star Wars] Vehicle Model Series 010 - A-Wing Starfighter


2 units in the package

RM24.60
img
SAVERM53.70

[Star Wars] 1/72 Poe's Boosted X-Wing

The upgraded version of Poe Dameron’s X-Wing with boosted accelerator pod as seen in “Star Wars: The Last Jedi.”

Resistance engineers have retrofitted a new device for Poe to give an extra edge in combat, allowing Poe much needed speed to outmaneuver the First Order. Utilizing Bandai's trademark color injection molding techniques, the 1/72 X-Wing features opening and closing S-foils, laser effect parts that can attach to the wings, a cockpit with 2 different canopy options, and 2 display stands. A nipper or sprue cutter (sold separately) is required to remove parts from runners, but does not require glue to assemble.

Set includes 2 types of Dedicated display base stands (1 Aqua Clear and 1 Black), Pilot x1, BB-8 x1, RO-H2 x1, Laser effect part x 2, Landing gears x 1, 2 types of canopies (frame and clear version). Parts for the original version from “Star Wars: The Force Awakens” are also included. Water-transfer decal x 1 Marking sticker x 1.

Product Details

  • Size: Wingspan Approx 6 inches, Body 6.7 inches when built

RM108.00
img
SAVERM11.30

[Star Wars] Vehicle Model Series 011 - Blue Squadron Resistance X-Wing Fighter

X Wing Fighter (Resistance Specification) Appears in the Vehicle Model Series with "Star Wars / The Last Jedi" Version! While palm-sized collection model, the new droid loaded in the X wing fighter and the characteristic airframe are precisely reproduced! Total length: about 87 mm [INCLUDED ACCESSORIES] ■ Dedicated display base × 1 [CONTENTS] ■ Sprue x 5 ■ Marking seal × 1 ■ Instruction Manual × 1 (printed on the back of the box)

RM24.60
img
SAVERM238.80

[Star Wars] 1/5000 Star Destroyer with LED (First Production Limited)

The Star Destroyer from Star Wars: Episode IV A New Hope is finally joining the Bandai model kit line up as a 1/5000 scale model. The finished model kit will be an impressive 12.6 inches long and includes a display stand.

Display alongside the included in-scale Millennium Falcon and Blockade Runner ships to recreate the scenes from the film.


  • 1/5000 Scale
  • 12.6 inches (32cm) long when assembled
  • Made of plastic
  • From Star Wars: Episode IV A New Hope
  • Includes display stand and in-scale Millennium Falcon and Blockade Runner
  • Instructions may or may not include English translation

Contents :

  • Parts to build the Star Destroyer
  • Millenium Falcon
  • Blockade Runner
  • Display stand
  • Instruction manual

"Initial Production Limited Edition Specification"

  • The instruction manual comes with a lighting model version with "commentary page" edited by "Kiyuji Takahashi" added. (* 1) 
  • Clear exterior parts that can enjoy the built-in LED are additionally included. ( -  # 2) 
  • Promo Dellar "Mr. Dorobo Hisashi" Produced Clear by special production Special booklet for exterior parts additionally included. ( -  # 3) 
  • Package is a large format package with limited initial production ( -  # 4)
Notes:
  • ( -  # 1) is also included in the regular version. 
  • ( -  # 2) ( -  # 3) is not included in repeat production. 
  • (* 4) will be ordinary package from repeat production.

RM480.00
img
SAVERM139.30

[Star Wars] 1/5000 Star Destroyer

The Star Destroyer from Star Wars: Episode IV A New Hope is finally joining the Bandai model kit line up as a 1/5000 scale model. The finished model kit will be an impressive 12.6 inches long and includes a display stand.

Display alongside the included in-scale Millennium Falcon and Blockade Runner ships to recreate the scenes from the film.


  • 1/5000 Scale
  • 12.6 inches (32cm) long when assembled
  • Made of plastic
  • From Star Wars: Episode IV A New Hope
  • Includes display stand and in-scale Millennium Falcon and Blockade Runner
  • Instructions may or may not include English translation

Contents :

  • Parts to build the Star Destroyer
  • Millenium Falcon
  • Blockade Runner
  • Display stand
  • Instruction manual

"Initial Production Limited Edition Specification"

  • The instruction manual comes with a lighting model version with "commentary page" edited by "Kiyuji Takahashi" added. (* 1) 
  • Clear exterior parts that can enjoy the built-in LED are additionally included. ( -  # 2) 
  • Promo Dellar "Mr. Dorobo Hisashi" Produced Clear by special production Special booklet for exterior parts additionally included. ( -  # 3) 
  • Package is a large format package with limited initial production ( -  # 4)
Notes:
  • ( -  # 1) is also included in the regular version. 
  • ( -  # 2) ( -  # 3) is not included in repeat production. 
  • (* 4) will be ordinary package from repeat production.

RM280.00
img
SAVERM109.40

Star Wars 1/144 Millennium Falcon (The Rise of Skywalker)

New from Bandai Hobby comes the newest addition to the Star Wars model kit series. This model kit is snap together no glue or painting required. These model kits come with iconic accessories and are great to pose or display in your collection.


  • 1/144 scale
  • From Star Wars: The Rise of Skywalker
  • Made of plastic
  • Clear and frame versions of cockpit canopy
  • Includes two seated pilot figures
Contents
  • Parts to build the Millennium Falcon
  • Display Base
  • 2 Seated Pilot Figures
  • Clear cockpit canopy
  • Frame cockpit canopy
  • Open and Closed hatch parts
  • Landing Gear Parts
  • Marking stickers and water decals

RM220.00

Showing 31 - 60 of 61 products