Gundam Model Kits

Showing 1 - 6 of 6 products

img
SAVE RM159.90

MEGA SIZE 1/48 RX-78-2 Gundam

The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image

RM308.00
img
SAVE RM117.90

MEGA SIZE 1/48 MS-06S Char's Zaku II

  • Char's Zaku came from all Gandamufan Megasaizumoderu dedicated to big models! 
  • Ease to assemble the pipe liner lock mechanism in the adoption of power! Of course, also supports moving! 
  • Daburusepareta mono eye is included in the mobile! 
  • Children's fingers can easily å‹•Kasemasu. 
  • Their own tools - and is ... Megasaizumoderu Daburusepareta to help take the parts from the runner. 
  • RG also adopted a new panel line. 
  • Without any discomfort - RG Megasaizugandamu reproduced alongside the panel lines. 
  • RG shape conforms to the design of the backpack! 
  • Great! Easy to make! Fun! Megasaizumoderu POINT1: No special tools required for assembly. Nipper can not use. 
  • POINT2: Snap adopted without glue to assemble. 
  • POINT3: hearty! Ganpurasuteppuappumanyuaru come. 
  • POINT4: fun and fast-lock type runner. 
  • POINT5: Easy to assemble in Daburusepareta. 
  • POINT6: assembly instructions and color illustrations, intuitive icons that the necessary parts (symbols) is adopted. 
  • POINT7: Iropura because, without a finished painting cool! 
  • POINT8: uses a special decal, Ditiruappu challenge! 
  • Accessories: Zaku machine gun, heat hawk

RM312.00
img
SAVE RM117.90

MEGA SIZE 1/48 MS-06F Zaku II

  • Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 

RM312.00
img
SAVE RM209.00

MEGA SIZE 1/48 RX-0 Unicorn Gundam [Destroy Mode]

MEGA SIZE 1/48 RX-0 Unicorn Gundam [Destroy Mode]

Est Arrival: October 2017
- The biggest model in the series with the largest appearance!
- Overall height about 452 mm !! Mega size model maximum size! Feel the giant feeling of the real thing with the plamo according to the topic of standing up!

- POINT 1: Mega Size Series Maximum Size!
Mega size unicorn Gundam boasts overwhelming size. The total height is about 452 mm and the biggest size in the mega size series history.

- POINT 2: adopt shading mold
Part of the shoulder armor and other parts of the body Adopted a shading mold at key points. It emphasizes the shadow by sculpting the mold deeper than in the past, just to assemble it into a three-dimensional sense just like in the play.

- Attached weapons
Beam magnum and shield of the same scale are included. Beam · saber blade effect is attached to both arms to reproduce beam · tofer.

- Accessories: Beam · Magnum x 1, Shield x 1, Beam · Saber x 2

RM390.00
img
SAVE RM212.10

MEGA SIZE 1/48 Gundam Age-1

  • AGE-1 Normal, appeared in big size!
  • Detail drawing by Mr. Golden Bamboo 海老川 cause mechanical designer!
  • Create topic [Mobile Suit Gundam: AGE] from Gundam appeared in AGE-1 is mega sized model! 1 / 48 scale, according to the big size of approximately 375mm Height, the details of the exterior panels New configuration. Dual Camera Eye, and the emission core part of the chest, face full well gimmick!
  • Glow in the core and chest Vernier camera eye in his back ... (injection nozzle), the Dual-core parts will fire the camera and rotate.
Mega-Size Model, three points!
  • POINT-1: No special tools? Using a nipper, a part from the runner easily by hand. Can be removed.
  • POINT-2: Snap-Fit! Requires no adhesives or other? Simply match parts fit together. Easy to assemble.
  • POINT-3: Runner Lock method! Some parts are assembled together two runners. Runner Lock scheme. Make speedy.
  • Accessories: Dodds rifle, beam daggers × 2, saber × 2, the shield
    Pre-assembled LED Unit

Reviews of the MEga Size Gundam Normal by gundam.tk:

RM296.80
img
SAVE RM187.50

MEGA SIZE 1/48 Gundam Age-2

- GUNDAM AGE-2 It appears in Normal and メガサイズ! - Unite with a feeling of a scale and it is a detail rise! - Luminescence gimmick loading! A head, camera-eye, and a chest core unit shine! The Bar Nia portion of the back. It is a switch, and light will be emitted if it twists. (Test battery LR41 attachment) Point of three - メガサイズ models -- A special tool is needlessness (part separator attachment!!)! The snap fit !, runner lock system! - Accessories : beam rifle, shield, and beam saber x2, part separator x2

RM340.40

Showing 1 - 6 of 6 products