Search: "OTHERS" Brand Products

Showing 1 - 30 of 174 products

img
SAVE RM4.99

MG 1/100 Aile Strike ver RM water decal

  • Water decal for HG / MG warning sign water decal - RED color
  • Not pre-cut like the bandai slide water decal
  • Extra touch of details for modeling kit

RM13.00
img
SAVE RM5.80

RG Gundam Red Frame Water Decal

  • water decal for RG Red Frame model kit scale 1/144.
  • not pre-cut like the bandai slide water decal.
  • stock arrive by end of September 2015

RM12.10
img
SAVE RM5.80

HG / MG warning sign water decal - BLUE color

  • water decal for HG / MG warning sign water decal - BLUE color
  • not pre-cut like the bandai slide water decal.

RM12.10
img
SAVE RM17.18

MG 00 Raiser Gundam Silver Decal

  • silver color decal for MG 00 Raiser Gundam

RM18.80
img
SAVE RM17.18

MG 00 Raiser Gundam GOLD Decal

  • gold plated color decal for MG 00 Raiser Gundam

RM18.80
img
SAVE RM16.88

RG Zgok Bronze Gold Color Water Decal

  • RG Zgok Bronze Gold Color Water Decal
  • 11 cm x 15 cm

RM13.10
img
SAVE RM16.88

RG Zgok White Mark Color Water Decal

  • 11 cm x 15 cm
  • RG Zgok White Mark Color Water Decal

RM13.10
img
SAVE RM11.18

MG RX-93-2 Hi-V Gundam Titanium Gold Mark Decal

  • Titanium Gold Mark Decal
  • Water decal for MG RX-93-2 Hi-V Gundam 
  • Not pre-cut like the bandai slide water decal
  • Extra touch of detail for modeling kits

RM18.80
img
SAVE RM11.18

MG RX-93-2 Hi-V Gundam Titanium Silver Mark Decal

  • MG RX-93-2 Hi-V Gundam Titanium Silver Mark Decal

RM18.80
img
SAVE RM11.88

PG MBF-02 Strike Rouge Gundam water decal

  • 12 cm x 14 cm
  • PG MBF-02 Strike Rouge water decal

RM12.10
img
SAVE RM17.18

PG MBF-P01 ASTRAY RED FRAME water decal

  • 14 cm x 21 cm
  • PG MBF-P01 ASTRAY RED FRAME water decal

RM18.80
img
SAVE RM15.08

HG STRIKE FREEDOM metal effect decal

  • Dimension 10 cm x 9 cm
  • HG STRIKE FREEDOM metal effect decal

RM14.90
img
SAVE RM33.87

[Metal Part] Aviation Hole 2.5mm for HG / MG Gundam model kits - 15 units

  • 2.5mm diameter - aviation hole.
  • Package include 15 quantity of aviation hole for modelling kits customization.
  • For other custom size please email us.

RM14.10
img
SAVE RM2.50

[Metal Part] 3.0mm Flat Head Screw * 30 units

  • Package include 30 quantity of flat head screw for modelling kits
  • Size of flat heat screw is 3.0mm.
  • For other custom size please email us.

RM8.30
img
SAVE RM16.98

[Metal Part] Zaku Metal shoulder thorn type ZC1 for HG / MG model kits 3 in 1 set

  • 3 units of zaku metal part shoulder throne type ZC 1.
  • Widest diameter: 9.7mm, length: 16.8mm
  • can fit with MG zaku modelling kits nicely and don't need any cement to be attach on the kit.

RM13.00
img
SAVE RM26.97

[Metal Part] 1 Pair of Metal Thruster Red C6 for MG / PG model kits

  • biggest diameter 15 mm, smallest diameter is 5.5mm
  • Height of the vents is 12mm
  • 2 units per package

RM15.00
img
SAVE RM30.20

[Metal Part] Hi-Nu Gundam Ver. Ka Enhance Metal Parts Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index


Parts


Installation
1.LED + 2 batteries x1direct installation
2.Vulcan Canon x2drill 1.3mm hole, attached to point with minor cement
3.Backpack + Calf thruster x4drill 2.0mm hole, attached to point with minor cement
4.Shoulder heavyarm screw x4drill 1.0mm hole, attached to point with minor cement
5.Forearm aviation hole x4drill 1.0mm hole, attached to point with minor cement
6.Metal hand joint cover (round shape) x4Direct installation, attached to point with minor cement
7.Chest Aviation hole x2drill 2.5mm hole, attached to point with minor cement
8.Metal knee joint cover (round shape) x4drill 1.0mm hole, attached to point with minor cement
9.Metal knee joint Hydraulic tube (round shape) x4drill 1.0mm hole, attached to point with minor cement
10.Knee and lower aviation hole x8drill 3.0mm hole, attached to point with minor cement
11.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Canon nozzle x1drill 2.0mm hole, attached to point with minor cement
12.Shield Aviation hole x12drill 2.0mm hole, attached to point with minor cement
13.Armor screw x10direct installation, attached to point with minor cement
14.Armor Screw 1.5mm x30drill 2.0mm hole, attached to point with minor cement
15.Armor aviation hole 1.6mm x15drill 1.6mm hole, attached to point with minor cement
16.Armor aviation hole 1.5mm x50drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM73.50
img
SAVE RM30.20

[Metal Part] RE 1/100 Gundam Mk III Enhance Metal Parts Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index        Parts                                                 Installation
1.                Rear Thruster x3                         drill 2.5mm hole, attached to point with minor cement
2.                Backpack thruster - x3                 drill 3.5mm hole, attached to point with minor cement
3.                Calf thruster - x2                         drill 1.4mm hole, attached to point with minor cement
4.                Armor aviation hole x15         drill 2.0mm hole, attached to point with minor cement
5.               Single line Screw x30                 drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM73.50
img
SAVE RM60.00

[Metal Part] MG 1/100 MSN-06S Sinanju Enhance Metal Parts Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index


Parts


Installation
1.Sinanju use Metallic eye (Green) x1Direct
2.Vulcan Canon x2drill 1.8mm hole, attached to point with minor cement
3.Shoulder thruster - Red C1 x4drill 1.5mm hole, attached to point with minor cement
4.Backpack Main thruster - Red C6 x2drill 2.0mm hole, attached to point with minor cement
5.Backpack Sub thruster - Red C5 x4drill 2.0mm hole, attached to point with minor cement
6.Energy Pipe x28Direct
7.Skirt Armor Thruster - Red C1 x4 drill 1.5mm hole, attached to point with minor cement
8.lateral Calf Armor Thruster - Red C1 x4 drill 1.5mm hole, attached to point with minor cement
9.Inner Calf Armor Thruster - Red C7 x4 drill 1.5mm hole, attached to point with minor cement
10.Back Calf Armor Thruster - Red C1 x2 drill 2.0mm hole, attached to point with minor cement
11.Shank metal hole - TE1 x4 attached on the backpack of Sinanju gundam
12.Lateral Vents 2.5mm x12 attached on the backpack of Sinanju gundam
13.Metal beads x50drill 1.5mm hole to attach on it.
14.Screw 1.5mm x30drill 1.5mm hole to attach on it.
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM147.00
RM147.00 Add to cart
img
SAVE RM21.60

[Metal Part] RG Char's Zaku Enhance Metal Parts Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check on the list below to find out the actual parts quantity.


Index
AccessoriesInstallation
1RG used Zaku Metallic LensDirect
2Energy pipe on headDirect
3Energy pipe on waistDirect
4Energy pipe on legsDirect
5Calf Ventdrill 2.5mm hole, to attached on the point; 10 units
6Backpack Red Colour Thrusterdrill 1.0mm hole, to attached on the point
7Soles Red Colour Thrusterdrill 1.5mm hole, to attached on the point
8Whole Body Armor screwsdrill 1.1mm hole, to attached on the point; 20 units
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM52.40
img
SAVE RM19.80

[Metal Part] Gundam GP04G Gerbera Enhance Metal Parts Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index


Parts


Installation
1.Shoulder thruster x2drill 1.5mm hole, attached to point with minor cement
2.Lower shoulder thruster x8drill 3.0mm hole, attached to point with minor cement
3.Aviation hole on shoulder x3drill 3.0mm hole, attached to point with minor cement
4.Backpack thruster x15drill 2.5mm hole, attached to point with minor cement
5.Aviation hole on armor x15drill 2.0mm hole, attached to point with minor cement
6.Single line screw x30drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM83.90
img
SAVE RM3.60

[Metal Part] Zaku metallic Lens - Red Colour

  • Diameter: 4.0mm
  • Red colour lens
  • Thickness: 2.2mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVE RM3.60

[Metal Part] Zaku metallic Lens - Green Colour

  • Diameter: 4.0mm
  • Green colour lens
  • Thickness: 2.2mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVE RM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Gold Colour

  • Modelling Kits Gatling Gun Bullet Chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
img
SAVE RM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Silver Colour

  • Modelling Kits Gatling Gun Bullet Chain - silver colour chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
img
SAVE RM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Black Colour

  • Modelling Kits Gatling Gun Bullet Chain - black colour chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
img
SAVE RM2.60

[Metal Part] 1.6mm Flat Head Screw * 30 units

  • Package include 30 quantity of flat head screw for modelling kits
  • Size of flat heat screw is 1.6mm.
  • For other custom size please email us.

RM6.20
img
SAVE RM86.00

[HSENG] AF-186 Mini Airbrush Compressor with HS-30 Dual Action Top Gravity Feed Airbrush [Free Painting Tools Set]

Commbo Set:
-  [HSENG] AF-186 Mini Airbrush Compressor
-  HS-30 Dual Action Top Gravity Feed Airbrush
-  HS-B3-1 Air Hose For Airbrush Compressor 

[Free Painting Tools Set]
  • Stainless Steel Twin Heads Toning Stick x 1
  • Paint tray 5cm x 3
  • Cotton bud (56 pcs)
  • Plastic measurement Cup x 3
  • Plastic Paints mixture Bottle 30 cm x 2
  • 6 mm Masking tape x 1
  • Small Pointed Paint Brush x 1
  • Plastic Eye Dropper for Modeling Paint 30ml x 4 units  
  • Metal Aligator Clips with sticks for Spray works x 5 pcs
  • Painting glove x 2 pcs

[HSENG] AF-186 MINI AIRBRUSH COMPRESSOR
The intelligent solution: The ideal, high-performance equipment for airbrushing, for beginners and pros, for model-making, ceramic, pottery, cosmetic, fingernails, helmets, technical illustrations, tanning, tattoos, textile, nail art - studios, working with water colours or just for airbrushing etc. Lightweight and easy to carry. Very quiet with only 49 decibels. The compressor is fully automatic and virtually pulsation free. It works without oil and therefore no polluted air. With water filter, compressed air regulator and manometer.

The airbrush compressor AF186 is suitable for airbrushes and can be used in handicraft, cosmetic, tattoo, body colours, hobby, model toys, finger nail design.It can also be used as air source for medical applications, environmental protection, aquariums, food and chemical industries laboratories etc.
Perfect working by means of a constant operating pressure, which is achieved due to the regulator.

Compressor Specification:
Type:                                         Piston, Piston
Configuration:                            Portable
Power Source:                           AC Power
Lubrication Style:                      Oil-free
Mute:                                         Yes
Place of Origin:                          Zhejiang, China (Mainland)
Brand Name:                             HSENG
Model Number:                          AF186
Voltage:                                     100-240V
Dimension(L*W*H):                   31*13.5*31 cm
Weight:                                      5.3 kgs
Certification:                              CE,GS, ETL, CETL, ROHS
Warranty:                                   1 month
Power:                                       1/6HP
Air flow:                                      20-23L/min
Suitable airbrush:                       0.2-1.0 mm
Auto stop:                                   4BAR/ 57 PSI
Auto start:                                   3BAR/43PSI
Tank:                                           3 L
Carton size:                                62.5*34*35 cm
Power Plug Type:    3 Pin (Malaysia Type)

- Pressure gauge.
- Compressed air regulator.
Switches off automatically.

Compressor Features:

1) Air tank, providing smooth air flow, zero pulse.

2) Air pressure gauge, air filter, pressure adjustable.

3) Piston type; oil free. None air polluted.

4) It can start with air, continuous working, powerful.      

5) Auto start and auto stop function.

6) Thermally protected inside.

7) With Fan, better cooling function

8) Low noise, 47db.


HS-30 DUAL ACTION TOP GRAVITY FEED AIRBRUSH 
The Airbrush is made with high quality components that work efficiently and effectively providing exceptional atomization and accurate spray control. The HS-30 creates incredible fine detail whilst the removal of the crown cap allows for a broader (up to 1" wide) application and increased number of possible effects. The fluid control knob gives for easy adjustment and control of paint flow.
 
The HS-30 provides a superior control of airflow through the Air Control Regulation Valve. A quick turn of the valve can instantly take you from full atomisation to extra fine detail. In addition if you fully open the valve it is very easy to clean during colour changes.

Airbrush Features:

- Airbrush gun is 0.30mm nozzle and needle
- Spray pattern fine detail to 0.75" (0.30mm to 20mm)
- Dual-action and round pattern
- Atomizing air pressure is 0.1-0.29 MPa
- Internal-mix
- Preset handle for paint contorl
- New features aid the application of special effects such as hairline, shading and grain.
- The airbrush that does it all - from fine hairlines to finely atomized background spray, along with an entire range of stippling effects.
- Teflon needle packing is excellent for its resistance to solvents.
- Adjustable main lever tension
- Single-piece auxiliary lever/needle chucking guide

Airbrush Specifications:

- Dual action Airbrush 
- Internal mix Airbrush
- Feed Type: Gravity
- Cup Capacity: 7CC
- Working Pressure: 15~50PSI
- Body Length: 150mm
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: HSENG
- Model Number: HS-30
- Type: air brush, Gravity
- Application: Paint Spray Gun
- Metal hanger: 1 pcs
- Control: Dual action
- Spanner: 1 pcs
- Working pressure: 15-50 PSI
- Nozzle Diameter: 0.3/0.35/0.5mm
- Control: Push-Button

RM510.00
RM510.00 Add to cart

Showing 1 - 30 of 174 products