Price Clear







Gundam Model Kits

Showing 11 - 40 of 2552 products

img
SAVERM95.90

MG 1/100 AMX-004 QUBELEY

  • Released Date: 2001 Well armed with two beam sabers and 12 1.3MW funnel remote beam weapons. 
  • From the head to the individual finger joints to the 10 funnel systems, each can be individually posed and removed. 
  • The shoulder armor opens just like the prototype. 
  • Binder with accureate details and thruster. 
  • Details opening cockpit area. 
  •  Weight: 1kg

RM144.00
RM144.00 Add to cart
img
SAVERM14.90

[212] SDBB ZZ Gundam

BB-212 ZZ Gundam Simple instruction included in a box Weight: 220g

RM33.00
img
SAVERM11.90

[239] SDBB Shining Gundam

BB-239 Shining Gundam Simple instruction included in a box Weight: 500g

RM24.00
img
SAVERM9.90

[203] SDBB Gundam Wing Zero Custom

BB-203 Wing Zero Gundam Custom Simple instruction included in a box. 

RM20.00
img
SAVERM59.90

MG 1/100 Master Gundam

  • Up to reproduce the features of the G Gundam series action poses with the new action frame.
  • By entering the body of the chest unit to reproduce the arms folded pose.
  • Master Cross (weapons), with figures of Master Asia.

RM108.00
RM108.00 Add to cart
img
SAVERM19.40

[114] HGUC 1/144 RB-79 Ball Twin Set

  • HGUC release the ball from the set of 2! 
  • Ball-inspired style Fasutogandamu version. 
  • Appeared in Platoon 08 180mm cannon in addition to the low recoil, comes with twin Fifutinkyariba expression. 
  • Comes with display base. 
  • The camera reproduced with clear parts. 
  • Movable arm portion. 
  • Will be set two. 
  • Accessories: low recoil cannon base × 2,180 mm × 2, twin Fifutinkyariba

RM58.50
img
SAVERM37.93

[100] HGUC 1/144 Unicorn Gundam (Destroy Mode)

  • Unicorn Gundam Destroy mode and Unicorn mode are both released at the same time! Unicorn Gundam Destroy mode is No.100 of HGUC 
  • By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. 
  • Psycho frame is formed with transparent material, for an emphasis on transformation. 
  • Use of new type polycap allows increased posing range. 
  • Has mobility that's as good as MG, even though it is HGUC 1/144! 
  • Includes: Shield (Open state) x1, Beam Saber (no beam) x2, Beam Magnum x1

RM70.00
img
SAVERM107.90

MG 1/100 Sword Impulse Gundam

  • Armed with many compressed gimmicks and purified proportion, here is the arrival of Sword Impulse Gundam! 
  • You can remove the Beam Boomerang from Sword Silhouette, and it can combine to be used as a large boomerang. 
  • The separation gimmick to Sword Silhouette had been fully reproduced! - Includes: Excalibur Laser anti-battleship blade x2, Sword Silhouette x1, Flash Edge Beam Boomerang x2, Beam Shield x1, Beam Rifle x1, Boomerang effect x2, Excalibur effect parts x2, Nose cone x1, Sword Silhouette stand base x1

RM162.00
RM162.00 Add to cart
img
SAVERM59.90

[001] RG 1/144 RX-78-2 Gundam

  • Runner x 10, Realistic decal x1, Instruction manual 
  • A new series REAL GRADE (RG) rolls out in July 2010. 
  • A new brand of plastic model kit that pursues realistic representation with the latest technology for all those who know Gundam. A highly detailed model that has dynamic action and gimmicks. A pre-constructed inner frame makes assembling stress-free. 
  • All settings of RX-78-2 Gundam are consolidated into the 125mm tall body. 
  • Having an inner frame "Advanced MS Joint" which makes it possible to move dynamically with fewer parts. 
  • Attached the "Realistic Decal" that pursues reality with special material.

RM90.00
img
SAVERM47.90

[116] HGUC 1/144 MSN-06S Sinanju

  • Bearing resemblance to the -  'Red Comet', the rival machine with great impact,
  •   Sinanju has arrived in HG!
  • The reproduction of mechanism settings for the HG series has been greatly pursued.
  • The characteristic thruster parts have been given mobility. The thrusters of the legs
  •   are given independent mobility.
  • The impressionable backpack can be opened and closed. This will add more variety to
  •   the posing expressions.
  • The complicated engravings had been reproduced too. The engravings have been
  •   reproduced by the use of foil sheets.
  • By the utilization of part structure that stops the parts joints to standing out too much,
  •   the level of completion has been improved.
  • Also includes a set of closed fist (left and right).
  • The great variety of weaponry allows you to recreate many of the scenes from the
  •   original animation!
  • The attachment/detachment gimmick of the grenade part on the Beam Rifle
  •   had been reproduced.
  • The Grenade, Beam A-xe (Storage Mode), and Beam A-xe (Expanded Mode) can be
  •   attached to the back of the shield.
  • Beam A-xe can be combined to become the Beam Naginata.
  • Accessories: Beam Saber x2, Beam Rifle, Shield, Beam A-xe (Expanded Mode) x2,
  •   Beam A-xe (Storage Mode) x2

RM108.00
RM108.00 Add to cart
img
SAVERM55.90

[085] HGUC 1/144 RGZ-91 Re-GZ

  • Re-GZ appeared from [Mobile Suit Gundam: Char's Counterattack.
  • Reproduce the mechanism of deformation to form by the Fighter Space (Back Weapon System) BWS.
  • The deformation mechanism is adopted as part replacement formula, pursue the ease of play of transformation gimmick.
  • Pursuing the proportion seems to form space fighter aircraft by reducing the thickness of the fuselage.
  • To adopt a gimmick stretch the legs. Precise details of the internal mechanism, such as vernier Apojimota
  • Reproduction.
  • Comes the action-based connection unit for the display of a single BWS
  • (Action Base 2 is not included).
  • Weapons - Accessories: beam rifle, shield, beam saber

RM112.00
RM112.00 Add to cart
img
SAVERM107.90

MG 1/100 MS-14S Gelgoog Char Custom Ver.2.0

MS-14S Gelgoog Char Custom Ver.2.0


Late in the One Year War, the Y designation was removed and the Gelgoog Commander Type was given a limited production run. With a more powerful generator and thruster output, the Commander Type even surpassed the performance of the feared RX-78-2 Gundam, as proven by Char Aznable in Texas Colony and in Solomon space.

RM162.00
RM162.00 Add to cart
img
SAVERM131.90

HGUC 1/144 Sazabi (Metallic Coating Ver.)

Accessories: 6, funnel × beam shot rifle, 2, beam saber × beam Tomahawk, and shield

RM198.00
RM198.00 Add to cart
img
SAVERM75.90

[099] HGUC 1/144 NZ-666 Kshatriya

A large mobile suit that features invidually deployable funnels. Massive wing binders are individually articulated and have their own locking tabs for weight balance. Approximately the size of 1/100 kits.


Accessories: 
- funnel × 6 (separation)
- beam saber (grip independent) × 2

RM172.00
RM172.00 Add to cart
img
SAVERM689.90

PG 1/60 ZGMF-X20A Strike Freedom Gundam

- The ultimate "Strike Freedom Gundam" has been refined by Kakito Hajime!! - The greatest sense of size among the PG. With it -  s greatest feature, the Super Dragoon in its fully expanded state, it becomes the largest size class in the history of Perfect Grade. - Custom Display Stand for displaying Strike Freedom Gundam is included. The use of custom stand with the ability to adjust angles enables you to display the model in a dynamic action pose. - The 3 Points for reproducing the Ultimate "Strike Freedom Gundam"!! The frame structure exposed during the High-Matt Mode/Full-Burst Mode has been processed with Extra Finish, emitting golden shine, drawing out the attractiveness even more. - [Super Dragoon Extending Mode Gimmick] By sliding the Super Dragoon, each part linked to it will be expanded to the firing mode. - [Mobile Interior Frame Structure Fully Newly Produced] The golden parts are drawn out by sliding the joints. The exterior with a sliding gimmick installed, in conjunction with the interior framing that has evolved from the PG Strike Gundam, along with the golden parts with Extra Finish processing, effectively shows the gold parts. - [New Mechanism used in the Joints] The parts that supports the weight such as hip and legs etc. has been armed with new mechanism. By the extra support of the joint, you will be able to enjoy making the poses that comes to mind. - Accessories: Beam Shield, Beam Rifle x2, Beam Saber x2, Xiphias 3 Rail Cannon x2, Super Dragoon x8, Custom Display Base *Requires 2x LR41 batteries for LED sold separately. Strike Freedom Gundam

Strike Freedom Gundam - Full Blast Mode


Strike Freedom Gundam - Perfect Grade


Stand for Strike Freedom Gundam 1/60

RM900.00
RM900.00 Add to cart
img
SAVERM99.90

MG 1/100 RGZ-95C ReZEL (Commander Type)

- The difference between aircraft equipped with General : wing binders, with mega beam launcher,Change the color of the color forming part of the aircraft commander. - Supplier of linkage with the deformation mechanism to improve the proportions! - Sabre, of arms and grenade built to reproduce the mechanism of armed! - Opening and closing the hatch. Reproduction and internal Mekamorudo, MG dent made to provide details of the brand we all expect. - Accessories: mega beam launcher, beam saber × 2, Shield

RM200.00
RM200.00 Add to cart
img
SAVERM325.90

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM775.00
RM775.00 Add to cart
img
SAVERM52.90

[093] HGUC 1/144 FA-93 Nu Gundam HWS

The Nu Gundam Heavy Weapons System, from the CCA-MSV series of alternate versions of Mobile Suits from the film 'Mobile Suit Gundam: Char's Counterattack', joins the HGUC lineup. Heavy Weapons System includes: additional armor for the Nu Gundam (chest, front and rear skirts, and large leg thruster units), a Hyper Mega Rifle, and a large shield with rocket launchers. Missile pod units on the chest armor pivot up and down. Fin Funnel unit can be disassembled into individual folding plates. Heavy Weapon System can be removed for display as a standard Nu Gundam. It includes Hyper Mega Rifle, large shield, beam rifle, Hyper Bazooka, normal shield, 2 beam sabers, and 6 Fin-Funnel plates.


According to wikipedia
The FA-93HWS ν Gundam Heavy Weapons System Type is a mobile suit featured in the original design series Char's Counterattack: Mobile Suit Variations.

Anaheim Electronics planned to improve the newtype use RX-93 ν Gundam by equipping it with the F.S.W.S (Full-armor System and Weapon System), which included removable chobham armor to increase its protection and includes two shoulder missile pods that flank either side of the head. The ν Gundam's shield also replaced by a larger shield with built-in thrusters, to counter the Heavy Weapon System's increased mass. The heavy beam rifle also increased the firepower of ν Gundam. However, the Heavy Weapon System plan was never completed due to ν Gundam's rushed deployment and eventual MIA status. It should be noted that the missile launcher components of the Full Armor are improved versions of the ZZ Gundam's missile launchers.

Weapons: 
  • 60mm Vulcan gun
  • Beam saber
  • Large beam saber
  • Beam rifle
  • Hyper bazooka
  • Hyper Mega Rifle - A beam rifle said to possess a power rating high enough to destroy anything at maximum output, it is the most powerful beam-type weapon of the suit. This weapon also supported ultra-long-range sniping and featured a bipod for precision firing. A sensor built into the rifle adjusts the power output according to the target's distance, and could be manually controlled via the mobile suit's psycoframe system. Its power output rivaled that of the main cannons of UC battleships. To improve accuracy, it was partly controlled by newtype psycommu waves.
  • High Mega Shield (Armor) - A variation of the RX-93's shield, it is thicker for solid-weapon endurance and can equip a ballistic missile launcher that detonates with enough destructive power to erase a number of suits when it makes contact with any surface. Due to its slow movement speed it is preferable to use it at point-blank range to inflict enormous damage without missing the target. Other than that, the shield has two fixed beam cannons, with power output rivaling that of the ZZ Gundam's High Mega Cannon.
  • Beam cannon
  • Missle launcher
  • Small missle
  • Shoulder Missile Launchers - An improved version of the multi use launchers that were widely used in the Gryps Conflict, the Missile Launchers mounted on the shoulders of the H.W.S. can use a wide variety of munitions, which included the Psycommu Grenade. Apparently, it is linked to the later development of a weapon called the "Funnel Missile".
  • Fin Funnels - Considered one of the most deadly weapons in UC history, the funnels were individual remote weapons that could fly off and attack from receiving the psycommu waves of the pilot. Fin funnels were funnels equipped with their own generator, which greatly increased their capabilities. They needed less frequent charging, and were able to generate a fin funnel barrier, a defensive field, around friendly units.

RM115.00
RM115.00 Add to cart
img
SAVERM17.90

[322] SDBB 00 Raiser

  • Play value packed with a large number of the original gimmick.
  • To Raiser in Gundam + Raiser.
  • Saber mode of GN Sword II is reproduced in clear plastic.
  • It is equipped with an SD of original gimmick (Bird mode Fighter mode Rider mode) three
  • Width of play further expand!
  • Accessories: GN Sword II × 2, GN shield × 2, GN Sword II beam saber mode for parts × 2


RM42.00
img
SAVERM59.90

[002] RG 1/144 MS-06S Char Zaku II

The second release in Bandai's new "Real Grade" series is Char's Zaku II. Just like the first kit in the Real Grade line, the RX-78-2, the Zaku II packs an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features. The perfect counterpart to the RG Gundam, the Zaku II comes with the same kind of posable inner frame, piping, and enough markings to keep you busy for some time. Bandai continues to raise the bar.

RM90.00
img
SAVERM82.90

MG 1/100 RX-178 Gundam Mk-II Ver.2.0 (TITANS)

  • RX-178 Mk-II Ver.2.0 Titans
  • We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
  • Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
  • The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!

RM126.00
RM126.00 Add to cart
img
SAVERM15.90

[365] SDBB Sinanju

- SD weight of the volume while Shinanju appeared very suitable for MS! - SD in if you are a full Pureibaryu! - Moving from side to side mono eye look and move! - SD original! Respectively variations in upper and lower body Bisutomodo! - Parts Weapon rich! - SD completely reproduce patterns while the combination of weapons. - Accessories: A-xe beams x 2, beam rifle, grenade launchers, shields, Beam saber, pedestal

RM40.00
img
SAVERM29.90

[070] HGUC 1/144 MS-14S Gelgoog Char Custom

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

RM60.00
img
SAVERM53.90

MG 1/100 Rick-Dias Red Version

  • Built-in Phalanx cannons stored in the head give this Suit a strong defense weapon.
  • Features huge rear skirt and knee armor, as well as upgraded thrusters.
  • Can convert from Quattro Custom to standard Rick Dias! 

RM145.00
RM145.00 Add to cart
img
SAVERM37.90

[054] HGUC 1/144 Asshimar

The best thing about this disturbingly orange and green mecha is the fact that when it"e;s completed, it can transform from Mobile Suit mode to Mobile Armour mode. A custom display stand for showing it off is included as well. All parts snap together and are molded in colour; polycaps ensure smooth-moving joints. Foil stickers for details are included.

RM82.00
img
SAVERM154.90

MG 1/100 GN-0000 Gundam 00 Raiser oo Raiser

  • MG Raiser, go!
  • Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  • Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  • This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  • Cockpit block features opening hatch. 
  • Raiser binder is equipped with opening gimmick.
  • Thanks to new molds, weapons such as Raiser Sword can be recreated.
  • Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  • 1/100 pilot figure (Standing, Sitting)

RM234.00
RM234.00 Add to cart
img
SAVERM59.90

[004] RG 1/144 MS-06F Zaku II

  • Zaku II, which sustains the massive military potential of Zeon, joins in the RG series. Mounted the Real system. 
  • The head parts include two kinds of antennas for commander, and a head for ordinary soldier. 
  • F type armor is faithfully reproduced. 
  • Various hand parts are included. The right hand has better gripping force to hold the rifle. The left flat hand makes it look more expressive. 
  • Adopted the ""Advanced MS joint"". 
  • The ""Realistic decal"" makes it possible to reproduce mechanical texture. 
  • Runner x9, Realistic decal x1, Instruction manual

RM90.00
img
SAVERM59.90

[005] RG 1/144 Freedom Gundam

  • Freedom Gundam, the main MS of "Mobile Suit Gundam SEED", appears in the RG series. 
  • The forms of its wings are designed on the basis of investigation of real machines, and new frames improve its movability. They add realism on it. 
  • The "Lupus" beam rifle can be attached to the shield and add the stock. 
  • The beam of the Lacerta beam saber is recreated with transparent parts. It can be worn at the waist. 
  • The laminate anti beam shield can be mounted to its arms. 
  • You can recreate its high mat mode and full burst mode. 
  • Realistic decals improve its reality. 
  • runner (includes advanced MS joint) x9, realistic decal x2, instruction manual 

RM90.00

Showing 11 - 40 of 2552 products