Price Clear







Gundam Model Kits

Showing 121 - 150 of 337 products

img
SAVE RM106.50

MG 1/100 Gundam Astray Blue Frame Second Revise

  • Astray has been MG-ed for the very first time! Appearing in [VS Astray], the Astray Blue Frame Second Revise has been released in MG!
  • The outer layer slides as the arms parts and the legs parts move accordingly. The shoulder parts and stomach parts gained its large mobility due to the pulling mechanism used.
  • Able to improve the variety of poses using the Action Base (sold separately)
  • Tactical Arms II (sold separately) can be placed on the base included to take its fighting stance.
  • Complete Transformation of the back pack form into the Large Sword/ Gatling Arm.
  • The transformation of the Tactical Arms to the Flight Form and Blade Form has been completely reproduced.
  • The Gatling Gun and the two blades can be separated. The grip of the sword expands, and can be attached to the elbow side. (Beam also reproduced.)
  • Comes with the following: Tactical Arms II (with exclusive action base), Amour Schneider x2
  • Copyright Sotsu Agency / Sunrize Weight : 849g

RM181.40
RM181.40 Add to cart
img
SAVE RM106.00

MG 1/100 MSA-0011 S Gundam

A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 


Although the S Gundam had three separate cockpits, the other two were not used until the very end of the plot, where three pilots would be saved by the core block system (see below). Since its plans are highly classified, it is said in chapter 1, Revolt in Pezun, that the pilots have been only able to train in Z Plus B types, which are the highest performance transformable mobile suit they have access to. The S Gundam is equipped with relatively heavier armour than its Z Plus cousin, which is specifically mentioned in the story (Chapter 2:Sally Forth! S Gundam) where the 2 Z Plus C1 accompanying the S Gundam in its booster configuration took more damage even though S Gundam was at a much higher acceleration when against enemy fire. To further confirm this point, the author mentions that the pilot cannot even bear to imagine what will happen if they are using Neros or GM IIIs in the same situation. Within the design notes, the offensive capabilities of the S Gundam featured a highly accurate beam smart gun, with 12MW power operating the beam smart gun normally, the unit can connect the beam smart gun to two extra power outlets on both left and right hips or the centre of its belly, to supply extra power that increases the beam smart gun up to 56MW. 

However, this will have to sacrifice the mounting of one of the two 12MW beam guns that are similar to the ones used in the Zeta Plus mobile suit series. Two beam cannons protruded from the S Gundam's backpack over the shoulders, and it also featured four 60 mm vulcans in the tail stabilizer and four 60 mm vulcan guns in the head, in which the mechanical designer, Katoki Hajime, specially took the problems of this weapon in the pass series into account, including the barrel length being too short which means the weapon can only have grenade launcher effects as well as no space for ammo, and lengthened the barrel (also the depth of the head of S Gundam) and introduced the liquid explosives electronic firing mechanism to the design[2], in which later retconed earlier designs and is again mentioned in Gundam Officials, the Gundam Encyclopedia and Master Grade instructions. It also featured a red circular-shaped wire-guided remote beam weapon called an Incom that was stored in the forehead. And finally, to round out the S Gundam's weaponry, the unit featured two beam sabers stored in recharge racks in the small white protrusions in the unit's knees. The S Gundam is built on a modular design, made up of two separate transformable units that could combine with a core fighter variant called the G Core to create the full S Gundam. The S Gundam was capable of separating into the 3 crafts. The G-Attacker (also referred to as the A Parts) is one of the crafts, which was made up of the upper torso area of the S Gundam. The second craft was called the G-Bomber (also referred to as the B Parts), which were composed of the lower torso and legs of the S Gundam. 

The G-Core core fighter, which were the C Parts of the S Gundam, was flown by Ryu Roots. The story used this mechanism as a make shift role for the task force alpha not having enough mobile suits for the battle and has to compromise by separating the S Gundam for 3 pilots in chapter 12, Pursuit. The author also made his own disbelieve in combining robots[4] in the midst of battle into the plot, where S Gundam is forced to combine back into the mobile suit form and sacrifice of the 3 pilots' instructor was made by being their shield in order to buy them time for the combination in chapter 13, Triple Attack. A.L.I.C.E. The S Gundam in Gundam Sentinel featured a unique and incredibly complex artificial intelligence computer that went by the acronym name A.L.I.C.E., which was developed by Ryu Roots' mother, Meith Roots. A.L.I.C.E., which stood for Advanced Logistic & Inconsequence Cognizing Equipment, was more than the standard learning computer featured in earlier mobile suits; "she" had the capability to think and to grow. The growth of ALICE is one of the main plot lines to the story, compared to the growth of the main character Ryu Roots. In "her" early stages of growth ALICE was not yet a full individual, but "her" experiences with Ryu Roots would help "her" to grow. ALICE is originally programmed to place the pilot(s) life as first priority, and could assume total control of the S Gundam if "she" felt that the unit was in danger. 

This function has been used throughout the plot to save the pilot's life and caused confusion to the pilot since Ryu Roots has no knowledge of ALICE's existence even towards the very end of the story. Although 4 S Gundams have been produced, it is known that the other 3 S Gundams do not have the ALICE system installed on it. 

Stories source from: http://en.wikipedia.org Total 505pcs parts Simple Instruction included in a box.

RM224.90
RM224.90 Add to cart
img
SAVE RM94.10

MG 1/100 Gundam Dynames

- From [Mobile Suit Gundam 00] Gundam Dunames will finally appear in MG with completely new modeling!

- Expanded the stand of the GN Sniper rifle, and you can reproduce the stance of [sniper] which hides the main body to the ground.
- Head gimmicks corresponding to snipe pose movements, posing tension due to the leg joint structure can be reproduced.
- Reproduce the deployment of GN full shield.
- Missiles of the lumbar region -  " knee part -  " Hatch opening and closing of signal bullets and deployment of GN thruster Gimmicks unique to MG are installed

[accessories]
- GN Sniper Rifle x 1
GN Beam Pistol & Holster x 2
GN beam sabel x 2
GN shield x 2
GN full shield x 2

[Product content]
Molded article x 17
Foil seal x 1
Marking stick x 1
PP sheet x 1
Instruction manual x 1

RM175.50
RM175.50 Add to cart
img
SAVE RM61.00

[Super Nova -MoXin] 1/100 MG XXXG-01D2 Deathscythe Gundam

MG 1/100 Deathscythe Gundam from [Super Nova - MoXin]

- MG 1/100 Deathscythe Gundam from Wing Gundam EW Series 

- From MoXin , previously known as Super Nova
Pre-painted black and white colour 
- Self assembly required

Others Gundam from the same Series

1. [Super Nova] 1/100 MG XXXG-01S2 Nataku Gundam (Green)
2. [Super Nova] 1/100 MG XXXG-01S Nataku Gundam (Blue)
3. [Super Nova] 1/100 MG XXXG-01SR2 Sandrock Custom
4. [Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom Gundam
5. [Super Nova - MoXin] XXXG-OOWO MG 1/100 Wing Gundam EW Ver.

Kindly note that this kit is a NON-BANDAI product.

RM139.00
RM139.00 Add to cart
img
SAVE RM50.00

P-Bandai : MG 1/100 Gundam Amazing Exia [REISSUE]

P-Bandai Exclusive: MG 1/100 Gundam Amazing Exia


Reissue Date : Feb 2020
Estimate Delivery : March 2020

RM300.00
RM300.00 Add to cart
img
SAVE RM40.00

P-Bandai : MG 1/100 RX0[N] Unicorn Gundam 02 Banshee Norn (Final Battle Ver.) [REISSUE]

P-Bandai Exclusive: 1/100 MG RX0[N] Unicorn Gundam 02 Banshee Norn (FInal Battle Ver.)


Reissue Date : Feb 2020
Estimate Delivery : March 2020

RM360.00
RM360.00 Add to cart
img
SAVE RM110.00

P-Bandai Exclusive: MG 1/100 Zeta Gundam III P2 Type Red Zeta

Reissue Date : Feb 2020
Estimate Delivery : Mar 2020

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 P2 Red Zeta

RM390.00
RM390.00 Add to cart
img
SAVE RM110.00

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]

Reissue Date : Feb 2020
Estimate Delivery : Mar 2020

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM390.00
RM390.00 Add to cart
img
SAVE RM30.00

P-Bandai : MG 1/100 Advanced GN-X [REISSUE]

P-Bandai Exclusive: MG 1/100 Advanced GNX


Reissue : Feb 2020
Estimate Delivery : March 2020
  • Accessories: 
  • GN Beam Saber x 1, Proto GN Lance x 1, GN Shield x 1, GN Beam Rifle x 1.

RM260.00
RM260.00 Add to cart
img
SAVE RM80.00

P-Bandai : MG 1/100 Blast Impulse Gundam

Release date : March 2020

Estimate delivery : April 2020

The long awaited Impulse Gundam variant is finally coming to the Master Grade GunPla series! 

The Blast Impulse Gundam comes with entirely new mold for its "Blast Silhouette" offering variety of gimmicks that fits in today's GunPla standards!

[ACCESSORIES]
  • Blast silhouette
  • Defiant beam javelin
  • Beam rifle
  • Shield

RM300.00
RM300.00 Add to cart
img
SAVE RM258.90

MG 1/100 FAZZ Ver. Ka

Release Date: Feb 2020
Estimate Delivery : March 2020

-From [Gundam Sentinel], FAZZ is three-dimensional with MG Ver.Ka!

-Under the supervision of Hajime Katoki, armament and additional armor are composed with new interpretations. Pursuing proportions that do not become dull while maintaining a profound feeling.
-Uses a movable roll for the forearm to achieve a wide range of movement. When the arm is raised horizontally, it is structured to move in conjunction so that the additional armor does not interfere.
-When raising the legs, additional armor of the front armor is deployed upwards to ensure a range of motion.
-Missile pods loaded in various places are reproduced with interpretation unique to Ver.Ka. You can also open and close the hatch manually and enjoy the built-in missile display.
-Includes Ver.Ka decals that include different chest numbering. The FAZZ platoon in the work can be reproduced.

[accessories]
  • Double beam rifle X 1
  • Hyper Mega Canon x 1
  • Water transfer decal x 1
  • Foil seal x 1

RM400.00
RM400.00 Add to cart
img
SAVE RM298.00

Gundam Fix Figuration Metal Composite MS-06C Zaku II

Release Date : Apr 2020
Estimate Delivery : May 2020

-Mobile suits that everyone knows, [Mass production type Zaku II] appears in GFFMC

-Commercialized [MS-06C Zaku II C type] from [Mobile Suit Gundam THE ORIGIN] to GUNDAM FIX FIGURATION METAL COMPOSITE.
-Coloring and marking are newly three-dimensionalized by Mr. Hajime Katoki supervising the aircraft that can be said to be the origin of MS alongside [Char Zaku II] released from the brand.

-Proportion reproduction by Hajime Katoki. Characteristic [green] is reproduced with coloring except for a part.
-Produces a sense of weight and texture using die-casting.
-Various poses in the play can be taken with abundant movable parts. Each part has a slide gimmick to achieve both range of motion and design.
-Reproduce the Zaku II C type shape with new molding on the chest parts.
-Head parts can be replaced to reproduce a captain with an antenna or a general machine without an antenna.
-In addition to abundant armament, [Bazooka B for MS] is included with new modeling. The single-shot type B1 and the magazine type B2 can be reproduced. Furthermore, the magazine can be suspended on the right shoulder shield.
-You can select the number of each part of the aircraft with the attached decal seal.

- set content
  • Body
  • 4 types of wrist left and right for replacement
  • Zaku Machine Gun
  • Zaku machine gun magazines
  • Bazooka A for MS
  • Bazooka B for MS
  • Bazooka A-type spare magazine x 2
  • Bazooka B-type spare magazine x 2
  • Bazooka A replacement parts
  • Bazooka Type B replacement parts
  • Bazooka latch parts left and right
  • Heat Hawk (long)
  • Heat Hawk (Short)
  • Replacement antenna parts
  • Dedicated pedestal
  • Decal seal

RM900.00
RM900.00 Add to cart
img
SAVE RM258.20

Gundam Fix Figuration Metal Composite thq RX78-02 Gundam (40th Anniversary Ver.)

Reissue Date : Apr 2020
Estimate Delivery : May 2020

-[Gundam] with original coloring specification commemorating the 40th anniversary

-Commemorating the 40th anniversary of Mobile Suit Gundam, commercialized [RX-78-02 Gundam] from the high-brand GUNDAM FIX FIGURATION METAL COMPOSITE produced by Hajime Katoki.
-A movable pedestal can be set and displayed in a floating state.
-This is a luxury commemorative product with a new marking and drawing by Hajime Katoki.

-New coloring and marking specifications for products now.
-A set of recombination parts and weapons for various situations.
-A luxurious package with sleeves drawn by Hajime Katoki.

- set content
  • Body
  • 2 types of beam rifles
-  shield
  • Bazooka x 2
  • Core Pod
  • Shoulder cannon
-Replacement wrist left and right 3 types each
  • Beam saber x 2
  • Various body replacement parts
  • Dedicated pedestal

RM850.00
RM850.00 Add to cart
img
SAVE RM110.00

P-Bandai : MG 1/100 Yzak Joule's Slash Zaku Phantom

Release Date : April 2020

Estimate Delivery : May 2020

It only took a short time for Bandai Spirits to extend the parts of MG Lunamaria's Gunner Zaku Warrior to make the Yzak Joule's Slash Zaku Phantom! This kit comes with variety of newly molded parts, from its backpack to its weapon set.

Its body shares the same mold with the previously released Lunamaria\'s Gunner Zaku Warrior with added parts. Its MA-MR Falx G7 Beam Axe has given a mechanism gimmick for it to transform into 2 different modes. It also has a deactivated gimmick that can be mounted on its back skirt armor! Each beam effects of the Axe are molded in clear pink plastic with pointy features.

The entirely new molded backpack offers some great detailing, it is a defined version of its MMI-M826 "Hydra" Gatling Beam Cannon that has never seen before in GunPla form! The kit aslo comes with a special water slide decal specifically for Yzak\'s Slash Zaku Phantom!

[ACCESSORIES]
  • Hydra Gatling Beam Gun
  • Falx G7 Beam Axe
  • Beam Assault Gun
  • Shield x 2
  • Beam Tomahawk
  • High Performance Explosive

RM280.00
RM280.00 Add to cart
img
SAVE RM100.00

P-Bandai: MG 1/100 Gundam Deathscythe EW [Rousette]

Release Date : May 2020
Estimate Delivery :  June 2020

The Gundam Deathscythe EW Rousette Unit is finally coming to the Master Grade series! The kit shares the same molds with Gundam Deathscythe EW regular retail model kit that was released in 2010. This kit, of course comes with its completely newly molded Glory of Losers equipment called \"Rousette\" which adds a backpack unit to the Deathscythe to give it more aerial mobility.

The Rousette unit can also be folded into different modes; the normal mode which is folded towards its back when not in use, and flight mode where it\'s wingspan is extended to the sides to give some flight ability to its main unit. The kit is completed with all the Gundam Deathscythe EW equipment plus a sheet of water slide decals for detailing.

[ACCESSORIES]

* Rousette unit
* Beam Scythe
* Buster Shield

RM280.00
RM280.00 Add to cart
img
SAVE RM97.60

MG 1/100 Freedom Gundam Ver.2.0

  • Mobile Suit Gundam SEED's Freedom Gundam sets a new high mark in MG's evolution with its 2.0 version! 
  • Both frame and armor are completely rescupted with revised proportions! 
  • It's also packed with extra details from the SEED Ver. RM series. With extending elbows, sliding thigh armor, and a flexible waist, it’s perfectly suited to strike heroic poses! 
  • Its wing and beam cannons flex for full burst mode, as well. 
  • A full arsenal includes linkable beam sabers, and other accessories include a stand and a variety of manipulator parts.

RM172.00
img
SAVE RM125.00

P-Bandai Exclusive: MG 1/100 Mega Bazooka Launcher

  • The mega bazooka launcher used by Hyaku Shiki during the battle!
  • Model kits sold separately.
  • Stock will arrive shortly and ship once it arrive.

RM174.80
img
SAVE RM154.22

P-Bandai Exclusive: MG 1/100 XXXG-01Wfr/A Gundam Fenice Rinascita Alba

  • A variation to the popular Gundam Build Fighter's version of the Wing Gundam: Wing Gundam Fenice Rinascita Alba! This version of the Master Grade is a tribute to the original Wing Gundam with the original color scheme and slight modifications to parts of the Fenice Rinascita to make it even closer to the original look. Comes with the Buster Rifle, shield and beam sabers. Another Bandai Exclusive item for Build Fighters and Wing Gundam fans! Get one now!

RM265.50
img
SAVE RM158.92

P-Bandai Exclusive: MG 1/100 Heavy Gundam

  • The incredible design from the MSV line, the Heavy Gundam, is finally getting a Master Grade release! The impressive Frame Launcher is here in all its glory, complete with the Gatling gun and 4-tube missile launcher, and it mounts directly to the right arm! The over-the-shoulder beam cannon is also included along with a beam saber!

RM260.80
img
SAVE RM88.40

P-Bandai Exclusive: MG 1/100 Zeta Plus (Unicorn Ver.)

  • 1/100 (MG) Zeta plus Unicorn VER (P-BANDAI EXCLUSIVE)
  • It might be delayed if shipment hold by shipping authority.

RM151.20
img
SAVE RM70.40

P-Bandai Exclusive: MG 1/100 Full Armor Gundam Ver.Ka Weapon & Armor Hanger Expansion Set

This is P-Bandai Exclusive limited release item.
This is weapon and armor hanger set for MG Full Armor Gundam Ver ka Thunderbolts ver!
MG Full Armor Gundam Ver ka Thunderbolts ver is sold separately here. 
Comes armed: New beam rifle , recorded marking corresponding to the hyper - bazooka
This is prepainted plastic model kits, require simple snap-fit assembly only. .

RM179.60
img
SAVE RM92.90

P-Bandai Exclusive: MG 1/100 Marasai (Unicorn Ver.)

  • P-Bandai Exclusive: 1/100 Marasai (Unicorn Ver.)

RM307.10
img
SAVE RM154.70

MG 1/100 Providence Gundam (Premium Edition)

MG 1/100 Providence Gundam [Limited Edition]

Includes ZAFT Action Base

The Providence Gundam, the God who bears the noise of Thunder on his back, has now launched in the MG line-up! this version is an special set exclusive to the initial production! the special set includes a zaft-mark display stand and exclusive decals. The decals are special water-transfer decals from the MG seed series all together on a single sheet. The Providence Gundam shares its genealogy with the freedom Gundam and utilizes some of the same frame parts incorporating a highly dynamic joint structure and balanced proportion. Its distinctive rear-mounted dragoon pods can be equipped and displayed with clear struts to recreate its all-range attacks. Several gimmicks such as ankle extensions, movable cockpit, and the deployment of the composite armed shield system to the MS's left arm provide enhanced realism and enjoyment. Set includes judicium beam rifle x1, composite armed shield system x1, dragoon launch recreation struts x5, clenched hand (left and right), open hand (left and right), gun-wielding hang (right), open-hole clenched hand (left and right), saber effect x1, and zaft-mark display stand x1. Runner x17. Dry sticker x1. Tetron sticker x1. Foil sticker x1. Exclusive water-transfer decal x1. Instruction manual x1.

RM264.60
img
SAVE RM123.80

MG 1/100 RX-78-2 Gundam The Origin (Special Edition)

MG 1/100 RX-78-2 Gundam The Origin [Special Edition]


[ACCESSORIES]

  • LED unit [pink / yellow] 
  • Early type beam rifle x 1
  • Late type beam rifle x 1
  • Hyper bazooka x 1 
  • Beam saber x 2
  • Shoulder cannon x 1
  • Effect parts

RM211.60
img
SAVE RM25.90

P-Bandai Exclusive: MG 1/100 RX-78-1 Prototype Gundam

P-Bandai Exclusive: MG 1/100 RX-78-1 Prototype Gundam

  • Estimate Arrival : Early June 2017
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM274.10
img
SAVE RM40.00

P-Bandai Exclusive: MG 1/100 RX-121 Gundam TR-1 Hazel

P-Bandai Exclusive: MG 1/100 RX-121 Gundam TR-1 Hazel

RM280.00
img
SAVE RM89.60

MG 1/100 Gundam Barbatos

-[Mobile Suit Gundam: Iron-Blooded Orphans] Gundam Barbatos 4th Form, the leading aircraft, has appeared as an MG!

-Reproduce the internal mechanism Gundam frame, Ahub reactor thoroughly! Color reproduction by molding color given in parts unit, expansion gimmick for more dynamic movement, abundant optional parts. The amount of information is suitable as a master grade.
-4th form The setting color of the exterior is faithfully reproduced with the molding color. The density and amount of information unique to MG are overwhelming.
-The internal structure, Gundam Frame, deeply underlines the setting in the play and reproduces the details. We adopt silver plating to cylinder.
-The first Gimbic spinning gimmick is installed as an MG in the chest Ahab reactor.
-The internal frame, cylinder and armor are interlocked by the movable shaft embedded in the upper body. This can produce a lively posing.
-The cylinder on the shoulder reproduces the mechanical structure that follows the movement to pull out. Can express Barbatos's aggressive posing.
-The knee is movable by interlocking the frame and the cylinder. The range of motion is expanded by pulling out the parts behind the knees, and natural standing knees are also possible.
-Reproduce the swing of the left and right, hip shaft movement in the standby position. You can enjoy the waiting pose with a distinctive look down.
-The hand part comes with 3 types of replacements. Weapons are designed to be attached to the palm of the hand with the hand of the weapon owner.
-Mace can slide grip and tip.
-Slide and folding gimmick is mounted on the gun of the glide gun. Pursuit of playability by the lock mechanism.

[accessories]
* Mace x 1
Sword x 1
300 mm glide gun x 1
Foil seal x 1
Marking seal x 1

RM180.00
img
SAVE RM130.00

P-Bandai: MG 1/100 Re-GZ [Unicorn Ver.]

The 2001 Master Grade Re-GZ has been upgraded to its Mobile Suit Gundam Unicorn version with updated parts to meet today's GunPla standards!

HEAD
-The kit is given an entirely new mold for its head, provided with better proportion to its body.

TORSO
-Updated with newly molded exterior parts! It also has an entirely new joint parts for its abdomen section to provide the kit with better articulation.

LEGS
-The armor parts of its legs were updated and gave the Re-GZ a better proportion and articulation. It is provided with new joint parts for a wider range of motion specially when transforming the the kit into its waverider mode.

[ACCESSORIES]
-Beam Rifle [updated]
-Shield
-Beam Saber
-BWS [Back Weapon System]

RM350.00

Showing 121 - 150 of 337 products