Price Clear







Showing Gundam Parts product(s)

Showing 151 - 180 of 1224 products

img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Red Frame Kai

[Da Lin] Water Decal for MG 1/100 Gundam Astray Red Frame Kai

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gundam Astray Red Frame Kai
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Gold)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Gold

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
img
SAVERM4.60

[Metal Part] Joining Angle Detailing Enhancement Parts for MG 1/100 Model Kit

Joining Angle Detailing Enhancement Parts

- Maximum diameter : 9 mm 
- Part Long : 3.8 mm 
- Each set got 2 unit enhancement metal part 
- Total 4 sets per pack  

Suitable for Gundam Arm and Leg joining angle customization.

RM10.40
img
SAVERM5.50

[Metal Part] Turbine / Turbcharger Screw - 6 units

Turbcharger Screw Metal Parts
- Maximum diameter : 6.0 mm 
- Part Long : 2.0 mm 
- Joint hole diameter : 2.0 mm
- Each set got 1 unit Turbcharger Screw 
- Total 6 sets per pack  

Suitable for Thruster and Vent customization.

RM6.50
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Gundam Double X (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Gundam Double X (Bronzing Color Coating) 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for MG Gundam Double X Water Decal
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 RM. Aile Strike Gundam

[Da Lin] Water Decal for MG 1/100 RM. Aile Strike Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for  MG 1/100 RM. Aile Strike Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Black)

[Third Party] Single Stand Action Base MG/RG/HG (Black)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Blitz Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM13.00

HG/RG/MG Gundam Display Case with LED (20x20x30 cm)

Brand: VT

- Suitable for any HG/RG/PG Gundam (MG kits without wing expansion and action base)
- Size : 20cm (width) x 20cm (length) x 30cm (height)
- Built in LED unit (White color only) (no lighting mode)
- USB cable is included
- Dustproof display case
- Self assembly required + solid strong support on the edge of the glass. 
- Able to fit small size HG and RG model kits with action base.
Power adapter is not included
- Support power bank and smart phone adapter for power supply

RM55.00
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Red)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Red)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Blue)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Blue)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Green)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Green)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM7.90

[Metal Part] X1 Turbine Thruster for Gundam Kit (1 pair, 2 sets)

[Metal Part]  Metal Turbine Thruster for Gundam Kit (X1)

  • Specifications : Maximum diameter 9mm, Height 10mm, Joint hole Diameter 2.0mm
  • 2 sets (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM6.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (G3, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G3, Silver)

  • Specifications : Maximum diameter 10mm, Height 10mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM13.20
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G2, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G2, Silver)

  • Specifications : Maximum diameter 8mm, Height 8mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM12.50
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
img
SAVERM7.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y7, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y7, Gold)

  • Specifications : Maximum diameter 12mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.80
img
SAVERM4.40

[Metal Part] Metal Hydraulic Piston (4 units)

[Metal Part]  Metal Hydraulic Piston

  • Specifications : Maximum diameter 2mm, Total Length 15mm, Joint hole Diameter 1.0mm &                                  Joint hole Length 2.0mm
  • 4 units (2 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.0mm)
2)Apply cement to ensure the center joint tightened

RM5.60
img
SAVERM4.00

[Metal Part] Energy Cable Tubes Pipes Seamless Type (S Size, 3mm)

3mm S size Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm

Package include
- 20 units Energy Tube Ring
- 1 x 12 cm Spring pipe
 
(This product not include any figure)

RM9.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Nu Gundam

[Da Lin] Water Decal for RG 1/144 Nu Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Aegis Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for RG 1/144 X-1 Crossbone Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for HIRM 1/100 Red Frame

[Da Lin] Water Decal for Hi-Resolution 1/100 Astray Red Frame Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Special design for Hi-Resolution 1/100 Astray Red Frame Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Buster Gundam

[Da Lin] Water Decal for MG 1/100 Buster Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Buster Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/00 Duel Gundam

[Da Lin] Water Decal for MG 1/100 Duel Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Duel Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Blue Frame 2nd Revise

[Da Lin] Water Decal for MG 1/100 Astray Blue Frame 2nd Revise

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Astray Blue Frame 2nd Revise
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Providence Gundam

[Da Lin] Water Decal for MG 1/100 Providence Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Providence Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blast Impulse Gundam

[Da Lin] Water Decal for MG 1/100 Blast Impulse Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Blast Impulse Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00

Showing 151 - 180 of 1224 products