Price Clear







Gundam Model Kits

Showing 161 - 190 of 2564 products

img
SAVERM30.70

[09] SD Gundam Cross Silhouette Sisquiede

A new generation of super-deformed kits is here! The SD Cross Silhouette series allows you to choose between two different inner frames that will change the proportions of your kits. You can choose between the cuter look of the SD (Super Deformed) frame, or the taller and more action-packed look of the CS (Cross Silhouette) frame! (This kit only includes the SD frame.)

The Sisquiede from the "SD Gundam: G Generation: Monoeye Gundams" joins the Cross Silhouette family, in its AEUG colors! Its monoeye is realistically reproduced with a jewel sticker, and its flexible binder enables you to change it into its high-speed cruising form! It's equipped with its I-Field Launcher and two beam sabers, too. 


Accessories:

- I-Field Launcher
- Beam sabers (x2)

RM53.20
img
SAVERM11.90

[09] SD Sangoku Soketsuden - Diao Chan (Kshatriya)

SD Sangoku Soketsuden - Diao Chan (Kshatriya)

RM24.00
img
SAVERM23.90

[001] HGBD:R 1/144 Earthree Gundam

-From "Gundam Build Divers Re: RISE", which will be distributed on the Gundam channel from October 2019, the leading model will appear!

-Adopt a new mechanism [core docking custom] beyond build custom! Combine colors and weapons to create your own original Gundam!
-The unit that becomes the core of Earthly Gundam [Core Gundam] and the support mechanism [Earth Armor] can be combined and converted to Earthly Gundam.
-Core spray guns and core shields can also be reassembled into large weapons with reinforced parts.

[accessories]
* Rifle x 1
Shield x 1
* Foil seal x 1

RM60.00
img
SAVERM11.90

[OP03] SD GUNDAM CROSS SILHOUETTE SILHOUETTE BOOSTER [WHITE]

- Extended parts set appeared in the SDCS series!

- By attaching to an existing frame it is possible to reproduce even higher head and low head, and expandable to your head.
- Hirate (left and right), hand grip (left), saber possession (right) are included.
- Futosumo parts available for SDCS Zaku II are included.
- You can make [Jim] by combining this product with Jim Head and SDCS Gundam which is included in the optional SDCS frame.

[accessories]
* Hand parts x 1 formula
Frame custom parts x 1 formula
Parts for gym x 1 formula

[set content]
Molded product x 1
Seal x 1
Instruction manual x 1

RM24.00
img
SAVERM81.60

MG 1/100 RX-78-3 G3 Gundam Ver 2.0

Gundam 2.0 in G-3 coloring. Includes accurate proportions and features that are faithful to the Gundam as it appeared in the classic animated TV series. An all new "full action inner frame" allows the Gundam's waist to twist and move forward and back even with the Core Fighter in place. Three part sole design enhances contact of feet with the ground. Accurately sculpted Core Fighter features a pilot's seat that rotates to face forward during transformation into Core Block mode.



Accessories:
- Beam rifle
-"Super napalm" canister
- Hyper bazooka
- Beam sabers x 2
- Beam javelin
- The Gundam hammer
- Shield

RM170.00
RM170.00 Add to cart
img
SAVERM12.90

[13] SD Sangoku Soketsuden - Huang Zhong Gundam Dynames

[13] SD Sangoku Soketsuden - Huang Zhong Gundam Dynames

RM23.00
img
SAVERM76.50

[035] RG 1/144 Wing Gundam (TV Ver.)

The long-awaited RG version of the TV version of Wing Gundam with completely new modeling!
?? Various gimmicks to reproduce the setting mechanism and poses in the play, and the original gimmick based on the actual machine verification are condensed to 1/144 scale.
?? Introduced an original movable gimmick with the image of a bird in the wing part based on the actual machine verification unique to RG.
?? Advanced MS joint is used for the base of the wing.
?? Built-in movable gimmicks on shoulders and body block to reproduce the dynamic posture of Buster rifle and beam saber.
?? By rearranging the parts, it can be transformed into a bird form.
?? By using action-based compatible parts, it is possible to display not only in MS state but also in bird form.

[Accessories]
?? Buster rifle x 1
?? Shield x 1
?? Beam saber x 1
?? Hand parts (left and right) x 3 types each
?? Weapon holder (right) x 1 type
?? Action base compatible parts x 1
?? Realistic decal x 1

RM115.20
RM115.20 Add to cart
img
SAVERM100.40

[032] RG 1/144 V Gundam / Nu Gundam

Amuro lay boarding aircraft appeared in [Shizua of Mobile Suit Gundam counterattack] lineup in RG!

-Various gimmicks to reproduce the setting mechanism and the poses in the play, and the original gimmicks based on real machine test results are condensed to 1/144 scale.
-With precise parts configuration, it creates both 1 / 1s image and enjoys both fun and decorating.
-Gundam's distinctive coloring is reproduced in molded color. The white body uses three light gray molded colors to increase information density.
-Joints are built into the shoulders and abdomen, and can move flexibly. It enables twisting and shoulder extrusion, resulting in more dynamic posing.
-Armor on the shoulder has a built-in mechanism that expands in tandem with the internal joint. By expanding the range of motion of the shoulder, reduce the interference between parts that occur in posing etc. holding an arm.
-The lumbar joint moves finely for each block, expanding the movable range of the leg. The knee can be pushed forward widely, and a powerful pose with a wide stance can be produced even at 1/144 scale.
-The legs are equipped with [Multilink Gimmick] where the armor slides in conjunction with the movement of each joint. Poses with large knees are also reproduced naturally.

[accessories]
Beam  rifle x 1
Fin *  Funnel x 6
New hyper bazooka x 1
* Shield (Beam *  Canon) x 1
* Beam saber (backpack part, arm part) x 1 each
Missile x 1 type

[Item content]
Molded articles x 13
Realistic decal x 1
* Instruction manual x 1

RM151.20
RM151.20 Add to cart
img
SAVERM33.80

[013] HGBD:R 1/144 Jupitive Gundam

-From [Gundam Build Divers Re: RISE], the hero machine enhanced type appeared in Core Gundam & Unit!

- New color of the main machine. Core Gundam has also been redesigned with some molding colors.
- You can equip your arm with a backpack and use it as a weapon or shield.
- The backpack can be displayed as a funnel bit.
- The armor unit is transformed into two forms: [Normal form] and [High speed form].
- Equipped with a beam gatling gun.

[accessories]
* Beam rifle x 1
* Beam saber x 2
*  Effect parts x 4
*  Base x 1

RM86.00
img
SAVERM137.30

HGUC 1/144 RX-104FF Penelope

The most anticipated High Grade model of the year comes with its super bulky aesthetics. Penelope's unique features can now be experienced in its GunPla form, with detachable Flight Unit to produce the Odysseus Gundam that's been protected inside it.

[ACCESSORIES]
  • Beam Rifle
  • Beam Saber x 2
  • Shield x 2
  • Display Base
Yoshiyuki Tomino's movie trilogy, Mobile Suit Gundam: Hathaway's Flash will be debuting sometime in 2020.

RM270.00
RM270.00 Add to cart
img
SAVERM7.90

[27] SD Gundam Sangoku Soketsuden - Xu Huang Gundam Deathscythe

A former bandit that became a member of Blue Wing after meeting Cao Cao.  Based on the Gundam Deathscythe, hea carries an ax that can also change into a twin beam scythe.  His wings can also be combined to create a shield for Cao Cao.

RM28.00
img
SAVERM21.90

[230] HGFC 1/144 Death Army (Dark Army)

Release Date : Nov 2019
Estimate Delivery : Dec 2019

-HG appeared in [Mobile Gundam G Gundam], appeared in HG aircraft will be dropped in indestructible by DG cells!

-Reproduce the distinctive coloring of Death Army with molded color.
-Reproduce the folding gimmick of the leg by replacing the parts of the foot.
-Two types of eyes are selective.
-Equipped with a custom two-hole joint.
-Display a powerful battle scene in combination with the HGFC Series Mobile Suit G Gundam line-up!

[accessories]
? Gold rod type rifle x 1
? Foil seal x 1

RM50.00
img
SAVERM37.80

[004] HGBD:R 1/144 Gundam Justice Knight

-From "Gundam Build Divers Re: RISE", which will be distributed on the Gundam channel from October 2019, an aircraft based on Infinite Justice Gundam will appear!

-Custom knight style with shot lancer, circular shield and cloak-like wing.
-HG's new hip mechanism enables dynamic posing with widely spread legs.

[accessories]
* One-handed sword x 1
Lance x 1
* Back wing x 1
* Shield x 1 
* Foil seal x 1

RM82.00
img
SAVERM76.70

[005] HGBD:R 1/144 Nu-Zeon Gundam

Release Date: Nov 2019
Estimate Delivery : Dec 2019

-From [Gundam Build Divers Re: RISE], a red ? Gundam with a large sword imitating the emblem of the Zion army appears!


-Equipped with four Cape thrusters on the back.
-Geonic Sword transforms from Normal mode to Bowgun mode and Beamsword mode.
-A floating display is possible with an optional stand.

[accessories]
* Geonic Sword x 1
Beam blade x 1
Thruster x 4
* Foil seal x 1
Dedicated pedestal (for geonic sword) x 1

RM109.00
RM109.00 Add to cart
img
SAVERM9.90

[30] SD Sangoku Soketsuden - Gan Ning Crossbone Gundam

SD Gundam Sangoku Soketsuden - Gan Ning Crossbone Gundam

RM32.00
img
SAVERM9.90

[31] SD Sangoku Soketsuden - Da Qiao Gundam Artemie / Xiao Qiao GN Archer

SD Sangoku Soketsuden - Da Qiao Gundam Artemie / Xiao Qiao GN Archer

RM32.00
img
SAVERM19.90

[012] HGBC:R 1/144 Mass Production Type Zeonic Sword

A gigantic sword that can be used as a custom weapon for your "ZEON" model kits. This kit shares some of its mold from the HG Astray Blue Frame Second L's Tactical Arm unit. The sword also has some transformation gimmick that deploys some of its forms for different weapon use.

The mold of the same weapon also appeared in HGBD:R 1/144 nu-ZEON Gundam which is molded in red and gold, and embedded with a Zeon sigil in the middle part

[ACCESSORIES]
-Pieces to build Zeonic Sword
-2 Support arms
-Stand
*Gundam is not included

RM34.00
img
SAVERM14.90

[011] Haropla Zakrello Haro

Haro returns in its another cute form! This time, Haro cosplays as a Zakrello, a prototype mobile armor from the Mobile Suit Gundam TV series which was used by the Zeon forces during the One Year War.

This Haro is equipped with Zakrello's Sickle weapon on both of its arms, and installed with a booster pod for space use mobility.

-As a halo custom variation following [Ball Halo], [Zacero Halo] has appeared!

-Equipped with a sickle and booster inspired by the Zion army's large MA Zacero.

[accessories]
* Exclusive pedestal x 1
* Foil seal x 1

RM30.00
img
SAVERM13.10

[OP-08] SD Gundam Cross Silhouette Silhouette Booster [Green]


-Green lineup in [Expansion parts set] of SDCS that expands the range of play!
-High and low head can be customized by assembling to existing frame!

[accessories]
  • Hand parts x 1 set
  • Frame custom parts x 1 set
  • Gym parts x 1 set
  • Foil seal x 1

RM22.80
img
SAVERM23.90

[015] SD Gundam Cross Silhouette Earthree Gundam (SD)

Earthtree Gundam from "Gundam Build Divers Re: RISE," gets an SD Gundam Cross Silhouette kit from Bandai! He features a core Gundam form and external armor parts that attach easily. Get yours today!

[Includes]:

  • Rifle
  • Shield
  • Foil stickers for markings

RM48.00
img
SAVERM7.90

[019] HGBD:R 1/144 Mercuone Weapons

HGBD:R 1/144 Mercuone Weapons
  • From ~Gundam Build Divers Re:RISE~, the protagonist special underwater battle type weapon appears.
  • You can build large size equipment with items related to Core Docking Custom. 
  • In addition, HG model kits are also compatible.
  • ***Gundam and Action Base is not included.

RM28.00
img
SAVERM47.80

[068] Figure-rise Standard Build Fighters Try Fumina Hoshino

Release Date: September 2020
Arrival Date: October 2020

- From [Gundam Build Fighters Try] comes a figure-rise series of Fumina-senpai, who loves Gundam and Gunpla from the bottom of her heart!

- The hoodie is removable.
- Three facial expressions are included. You can reproduce a shy face and a surprised face.
- The hand parts come with a grip and an open hand.
- Fumina color bubble wrap that can be displayed together is also included.

[accessories]
- Facial expression parts x 3
- Wrist parts (left and right) x 2 each
- Petit bubble guy x 1
- Foil seal x 1
- Water transfer type decal x 1
- Exclusive pedestal x 1

RM96.00
img
SAVERM45.80

[026] HG 1/144 RX-78-2 Gundam (Gundam The Origin Ver.)

-The Origin Version RX-78-02 Gundam is now available in HG from [Mobile Suit Gundam THE ORIGIN]!

-Items suitable for the opening of the 40th anniversary of the Gunpla, such as the parts composition that can reproduce colors just by assembling, the latest format of the HG series, etc.-You can enjoy the design of both the early model, which is characterized by left-right asymmetry, and the mid-term model, which is characterized by left-right asymmetry.-The forearm is equipped with a gatling gun on the left forearm to reproduce the previous model. The shape of the cuffs is also different and it is asymmetrical. The mid-term model has left and right parts of the same shape.-The chest has a shoulder magnum on the upper left and a Vulcan cannon on the upper right to reproduce the previous model\'s left-right asymmetry. On the other hand, by forming the left cover block with parts common to the left and right, it is possible to reproduce the mid-type symmetrical shape.-The shoulder part can be reproduced in the first half and the middle half by selecting the top part.-Equipped with a movable vernier on the calf. The cover can be unfolded and displayed.-Toe parts are also movable.-Attached weapons can be attached to the joints on the waist and shield.
[accessories]* Beam rifle (early model / middle type) x 1 each* Beam saber x 2* Shield x 1* Hyper Bazooka x 1* Shoulder ? Cannon x 1* Foil seal x 1* Marking seal x 1

RM92.00
img
SAVERM119.50

[235] HGUC 1/144 Bound-doc

Release Date: September 2020

Arrival Date: October 2020

A large mobile armor with a total height of about 190mm from [Mobile Suit Z Gundam] is now available in the HG latest format
Express the characteristic coloring with molding color
The characteristic skirt structure is reproduced by the calculated parts composition and color coding

[Accessories included]
- Beam Rifle x 1
- Beam saber x 1
- Diffusion mega particle cannon x 1
- Exclusive pedestal x 1
- Foil seal x 1

RM180.00
RM180.00 Add to cart
img
SAVERM29.90

[022] HGBD:R 1/144 Alus Earthree Gundam

- [Gundam Build Divers Re: RISE] 2nd season
- Available on the Gundam Official YouTube Channel [Gundam Channel] from April 2020

- [Enemy Gundam (provisional)] that comes from 2nd Season is already kit
- Supports a new style [Core docking custom] that goes beyond the build custom.
- Combine Core Gundam and Armor to create your own original Gundam

[Accessories included]
* Beam rifle X 1
* Side (left and right) - 1 each
* Beam sword - 1
* Armor pedestal - 1
* Replacement head parts - 1
* Foil seal - 1

RM60.00
img
SAVERM27.80

[023] HGBD:R 1/144 Uraven Gundam

-New protagonist [Euraven Gundam] appears from [Gundam Build Divers Re: RISE] 2nd Season scheduled to be distributed on Gundam Channel from April 9, 2020!

-Core Gundam II can be transformed into a core flyer by itself.
-You can also enjoy customizing with existing armor with co-adding custom support!

[accessories]

* Shield x 1
* Beam saber x 2
* Sniper rifle x 1
* Bit x 3
* Weapon handle (left and right) x 1 each
* Side (left) x 1
* Pedestal x 1
* Display base x 1
* Foil seal x 1

RM68.00
img
SAVERM11.90

[025] HGBD:R 1/144 Saturnix Weapons

-A new exterior weapon for the main character is available from [Gundam Build Divers Re: RISE] 2nd Season, which will be distributed on the Gundam Channel from April 9, 2020!

-The next weapon is [drill].
-Supports core docking custom and can be installed on Core Gundam II sold separately.

[accessories]

* Claw unit x 1
* Drill unit x 1
* Connection joint x 1

RM24.00
img
SAVERM43.80

[231] HGCE 1/144 Infinite Justice Gundam

-[Infinite Justice Gundam] comes up in the latest HG format from [Mobile Suit Gundam SEED DESTINY]
-The lower back has an internal structure that enables expansion of the range of motion and holding of poses.
-The two wings of Fatum-01 are equipped with movable gimmicks so that they can warp up and reproduce the silhouette of aerial battle.
-A gimmick for expanding the range of motion of the hip joint has been introduced to reproduce the pose specific to the SEED series.
-Includes various beam effects.
-Reproduce each form of beam carry shield. Beam effect and beam shield are reproduced with clear parts. Lead wire included.

[accessories]

* High energy beam rifle x 1
* Beam saber (single state) x 2
* Beam saber (connection state) x 1
* Beam carry shield x 1
* Beam shield effect x 1
* Beam boomerang effect x 1
* Griffon beam blade effect x 2
* Griffon beam 2 blade effect x 2
* Foil seal x 1
* Lead wire x 1

RM88.00
img
SAVERM14.90

[29] HGBD:R 1/144 Fake Nu / v Unit



-New exterior items of the enemy Gundam will appear from [Gundam Build Divers Re: RISE] 2nd Season scheduled to be distributed on Gundam Channel from April 9, 2020!


-Compatible with core docking custom and can be installed on enemy core gundam (provisional) sold separately.
-Comes with a special pedestal for decorating armor.

[accessories]
* Exterior parts x 1
* Exclusive pedestal x 1
* Foil seal x 1

RM36.00
img
SAVERM13.90

[30] HGBD:R 1/144 Fake Nu / v Weapons



-New exterior weapons for enemy Gundam will appear from [Gundam Build Divers Re: RISE] 2nd Season scheduled to be distributed on Gundam Channel from April 9, 2020!
-Compatible with core docking custom and can be installed on enemy core gundam (provisional) sold separately.

[accessories]
* Backpack unit x 1
* Rifle unit x 1

RM28.00

Showing 161 - 190 of 2564 products