Price Clear







Showing OTHERS product(s)

Showing 181 - 210 of 795 products

img
SAVERM4.80

[Metal Part] 3.0mm Ribbed Shell Screw * 4 units

3.0mm Ribbed Shell Screw metal parts

- Easy installing with minor cement / glue 
- Widest diameter : 3.0 mm 
- Part Length : 2.0 mm 
- Each set got 1 unit ribbed shell and 1 unit screw core 
- Total 4 sets per pack  

Suitable for HG and MG scale Gundam Metal Parts customization

RM5.20
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Black)

[Third Party] Single Stand Action Base MG/RG/HG (Black)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM13.00

HG/RG/MG Gundam Display Case with LED (20x20x30 cm)

Brand: VT

- Suitable for any HG/RG/PG Gundam (MG kits without wing expansion and action base)
- Size : 20cm (width) x 20cm (length) x 30cm (height)
- Built in LED unit (White color only) (no lighting mode)
- USB cable is included
- Dustproof display case
- Self assembly required + solid strong support on the edge of the glass. 
- Able to fit small size HG and RG model kits with action base.
Power adapter is not included
- Support power bank and smart phone adapter for power supply

RM55.00
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (White)

[Third Party] Single Stand Action Base MG/RG/HG (White)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Red)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Red)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Blue)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Blue)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Green)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Green)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM7.90

[Metal Part] X1 Turbine Thruster for Gundam Kit (1 pair, 2 sets)

[Metal Part]  Metal Turbine Thruster for Gundam Kit (X1)

  • Specifications : Maximum diameter 9mm, Height 10mm, Joint hole Diameter 2.0mm
  • 2 sets (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM6.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (G3, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G3, Silver)

  • Specifications : Maximum diameter 10mm, Height 10mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM13.20
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G2, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G2, Silver)

  • Specifications : Maximum diameter 8mm, Height 8mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM12.50
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y5, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y5, Gold)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM8.20
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
img
SAVERM7.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y7, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y7, Gold)

  • Specifications : Maximum diameter 12mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.80
img
SAVERM11.50

[Metal Part] HG / MG Scale Gundam Model kit Metal Modification Bar / Stick (8 units)

HG / MG scale Gundam Model kit  Metal Tonic

* Detail Modification 
* Universal compatible
* Detail Bar / Pole Decorative Bar

Bar length : 10 mm
Joint Diameter : 1.0mm
8 units in the package

RM6.50
img
SAVERM4.40

[Metal Part] Metal Hydraulic Piston (4 units)

[Metal Part]  Metal Hydraulic Piston

  • Specifications : Maximum diameter 2mm, Total Length 15mm, Joint hole Diameter 1.0mm &                                  Joint hole Length 2.0mm
  • 4 units (2 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.0mm)
2)Apply cement to ensure the center joint tightened

RM5.60
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Brown Colour

  • Diameter: 5.0mm 
  • Brown colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on 1/144 or 1/100 DOM, MG Zaku

RM2.40
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Blue Colour

  • Diameter: 5.0mm
  • Blue colour lens
  • Thickness: 2.6mm
  • Material: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits
  • Glue required

RM2.40
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Gold Colour

  • Diameter: 5.0mm
  • Gold colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Green Colour

  • Diameter: 5.0mm
  • Green colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM4.00

MG/RE 1/100 Scale Gundam Stand Base - Astray Red Frame

MG/RE 1/100 Scale Gundam Stand Base

* Acrylic Base For MG 1/100 Scale Gundam
* Size : 19cm width x 24cm length x 4mm thick
* Include 4 chroming screw nut

* 6 pictures for selection 
   - Unicorn
   - Banshee
   - Sinanju Orb
   - Astray Red Frame 
   - Sinanju
   - Wing Zero 

RM25.90
img
SAVERM6.00

PG 1/60 Scale Gundam Stand Base - Unicorn

PG 1/60 Scale Gundam Stand Base


* Acrylic Base For PG 1/60 Scale Gundam
* Size : 24cm width x 29cm length x 4mm thick
* Include 4 chroming screw nut
* 6 pictures for selection 
   - Unicorn
   - Banshee
   - Sinanju Orb
   - Astray Red Frame 
   - Sinanju
   - Wing Zero 

RM32.90
img
SAVERM11.10

Multipurpose Screwless Type Action Base 1 Ver. 2.0 - Clear Green

Multipurpose Screwless Type Action Base 1 Ver. 2.0 - Clear
A display stand for holding SD, 1/144 & 1/100 scale Gundam models, includes various adapters and holders to fit almost any Gundam kit (exclude PG grade)!?
- Suitable or best fit for MG 1/100 Scale Gundam
- Screw-less Type-?Assembles required- Design base on traditional Action Base 1- Non-Bandai Product
Also available in following colours1. Clear?2. Clear Black3. Black4. Gray5. White6. Red7. Green

RM9.90
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear)

[Third Party] Single Stand Action Base MG/RG/HG (Clear  / Transparent)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Clear, Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM26.90

[VT] HG Gundam Machine Nest Stage with 4 Projection Light and Soldier Pose - Medium

HG Gundam Machine Nest Stage with 4 Projection Light and Soldier Pose


Stage Size : 29.5 cm (W) x 22cm (H) x 15cm (D)
Include 4 units of LED projection Light and 16 units Soldier pose

Suitable for HG scale 1/144 Gundam

RM63.00
img
SAVERM32.20

[VT] MG Gundam Machine Nest Stage with 4 Projection Light and Soldier Pose - Large

MG Gundam Machine Nest Stage with 4 Projection Light and Soldier Pose


Brand : VT
Stage Size : 30 cm (W) x 27cm (H) x 15cm (D)
Include 4 units of LED projection Light and 16 units Soldier pose

Suitable for MG scale 1/100 Gundam

Please note that this is Not Bandai product

RM75.60
img
SAVERM5.00

Magnetic LED Light Lights Spotlight Spot Display Light for Gundam MG 1/100 - Blue

[Third Party] MG 1/100 LED Unit  (Blue)

Package Includes: 1 Piece LED Lights

Gundam Magnetic LED Light

Brand: China Brand
Grade: MG 1/100 [Suitable for Non Bandai and Bandai]
Size: Approx. 1.9 x 1.4cm / 0.74 x 0.55 inch
Material: Plastic
Battery : cr1220 included
Magnet is included

RM13.90
img
SAVERM2.00

Wipe Pen Paneling Eraser for Modelling

Wipe Pen Paneling Eraser for Modelling

RM3.80
img
SAVERM2.00

Masking Tape Dispenser Tape Cutter Washi Tape Dispenser Roll Tape Holder

  • 100% brand new and high quality.
  • Fits regular masking tape and washi tape (not included Tape)
  • Perfect for Gunpla Model painting activities, scrapbooking, art projects, etc.
  • Multi-purpose , keeps craft tape or masking tape, memo roll organized
  • Not easily cut fingers, safe for children who love arts and crafts
  • It is safe and no peculiar smell

RM7.90

Showing 181 - 210 of 795 products