Showing 21 - 50 of 2897 products

img
SAVE RM148.90

MG 1/100 RX-0 Unicorn Gundam HD Color +MS CAGE

  • To commemorate the release of the "Gundam Unicorn" animated movie Bandai is releasing a newer, better, most glorious MG Unicorn called the Unicorn Gundam with Cage! 
  •  This isn't just a new paint scheme; Bandai have totally redone this kit. New body color. Fully transformable. Head redesigned, including vulcans, to match the animated version. 
  • Mobility of the hips is now 360 degrees & Knee joints have 150% more articulation! An additional antennae for destroy mode. 
  • Customize cage included that can store extra parts while beam saber can be stored at the back of the base. Cage can be attached to the Action Base 1, all arms are movable. 1/100 figures: Audrey, Banagher, Cardeas, and Marida included! 
  • Included weapons will be the Beam Magnum (with magazine), Hyper Bazooka, Shield, Beam Saber and select antennae.

RM300.00
img
SAVE RM104.90

MG 1/100 Launcher/Sword Strike Gundam

  • An upgraded version of Mobile Suit Gundam SEED’s MG Strike Gundam, this kit adds in the powerful Sword and Launcher Strike packs.
  • Backpack features connection points to mount advanced Strikers on the armor. 
  • Colors accurately reproduced, along with foil seals and marking decals, along with detailed panels to line.
  • Equipment Includes: Assault knives, shields, Launcher Striker, Striker Sword
  • Accessories: Launcher Striker x1, Sword Striker x1, 1/100 Pilot Figure x2 (Sitting, Standing), Armor Schneider x2, Shield x1

RM195.00
img
SAVE RM371.90

PG 1/60 Gundam Astray Red Frame

The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

RM708.00
img
SAVE RM98.90

MG 1/100 GN-001 Gundam Exia (Ignition Mode)

  • A deluxe upgrade to the already advanced Exia master Grade!
  • 01: An upgraded look for a fan-favorite Mobile Suit!
  • Exia Repair parts (with soft, textured cape) and Ignition Mode parts included to select either look
  • 02: Weaponry for both Ignition and Repair included!
  • Repair Mode features the broken, dulled GN Sword, while Ignition Mode includes all of the Exia’s GN Swords are chrome-plated, and the kit retains the Master Grade Exia’s GN Sword folding gimmick! 
  • 03: LED Units included for Ignition Mode!
  • Completely recreate the glowing GN Drive! Shining with the LED gimmick, the Exia’s chest and rear GN Drives light up for a totally dynamic appearance!
  • 04: GN Code accurately recreated!
  • The GN code that runs through the body is recreated in translucent green material and accentuated with decals to keep the details anime-accurate! 
  • 05: Display the GN Drive for maintenance! 
  • Display Stand with build arm is included to display the GN Drive in maintenance mode! 
  • Accessories: GN Sword x1, GN Sword Repair x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2, GN Beam Saber x2, 1 / 100 Pilot Figure (Sitting, Standing)

RM259.00
img
SAVE RM99.90

MG 1/100 Shin Musha Gundam

  • From the popular game series Dynasty Warriors Gundam, the Hajime Katoki-designed Musha Gundam is realized as a Master Grade kit! 
  • Utilizing the frame created for the Rx-78-2 Ver. OYW and clever parts separation, along with gimmicks for moving armor sections all add up one impressive Suit! 
  • Various weapons included, all of which can be mounted on the Suit for quick storage- the sword at the hip, and the other weapons mounted on the backpack. 
  • [Artillery Tanegashima] (rifle), [Tachi sun circle] (sword), comes equipped with a [spear diffuse round],
  • [Halberd lightning round] is attached. To the left hip armor the sword, spear, artillery, (each equipped with halberd armed to
  • It can be equipped with a backpack. )
  • Accessories: Tanegashima Gun x1, Nichirinmaru Katana x1, Denkoumaru Naginata x1, Sankoumaru Jumonji Yari x1

RM200.00
img
SAVE RM33.90

[009] HG ORIGIN 1/144 Zaku I (Denim/Slender)

  • Accessories: MS for the machine gun, MS for a machine gun spare magazine, MS for anti-ship rifle ASR-78, the heat Hawk, heat Hawk (storage state), MS for bazooka type A2, MS for bazooka spare magazine × 2, bazooka joint, open hand (left), gun possession (right), weapons possession (left and right)

RM67.90
img
SAVE RM32.30

[067] HG 1/144 Gundam Zabanya

Accessories includes beam rifle and comes with a pistol shape and 2 sets bits. At least ten GN Rifle Bit IIs are stored within the GN Holster Bits, mounted on Zabanya's rear thruster block. Weapons-wise, GN Micro-Missiles are laced throughout its armor and the GN Holster Bits contain GN Rifle Bits within them. Expected to arrive on middle September, 2010

RM75.60
img
SAVE RM43.90

[115] HGUC 1/144 Delta Plus Gundam

  • Prior to release of the second story, three-dimensional deformation of the fastest MS · Delta Plus! 
  • Replacement variant forms of reproduction wave rider. 
  • Machines do not feel that variable proportions of outstanding! 
  • Part adopt clear head! 
  • MS outstanding performance is in the form of posing! 
  • Minimizes replacement parts, can transform smoothly. 
  • Can be mounted in the form of armed wave rider. 
  • Accessories: beam saber × 2, beam rifle, shield, replacement parts for the deformation

RM88.00
img
SAVE RM10.78

[003] HGIBO 1/144 MS Option Set 3 N Gjallarhorn Mobile Worker

  • 3rd appearance weapon set that was to set the proximity weapons and Mobile worker!
  • A scene that has attacked the heroes along with the Grey's in the first episode is impressive, even Mobile workers Gyararuhorun owned included!
  • Halberd (provisional) can reproduce the stored state and deployment state in replacement.
  • HG Gundam ing with a Zion, comes with proximity armed, such as ing Sion Axe (provisional) and grayed Sion chopper (provisional).
ACCESSORIES:
  • Ing Sion Axe (provisional) × 1
  • Ing Sion chopper (provisional) × 1
  • Halberd (provisional) × 1
  • Galleria Le Horn Mobile worker × 1
Item Size/Weight : 18.8 x 14.9 x 4.6 cm / 86g

RM25.20
img
SAVE RM140.90

MG 1/100 ZGMF-X20A Strike Freedom Gundam (FULL BURST MODE)

  • This full burst mode special version box comes packed with the same MG kit as the normal version of MG Strike Freedom Gundam. 
  • And this special box include gold coating parts, Dragoon effect parts, a special clear blue base stand, and a clear illustration poster of Strike Freedom vs Destiny. 
  • Clear stands for each Dragoon are included, which can be attached to the special base stand and display them being sent flying out to its target(s). 
  • Stickers and custom decal markings are included to detail-up the completed Strike Freedom Gundam kit.Comes with the gold inner frame, unique stand base that able to shoot the beam canon of dragoon system, some hate the stand base, some love it, and notice the 'wing' inner also in gold color, which is pretty cool too. 
  • One of the similarity feature of strike freedom gundam full burst mode is the combineable rifle on the waist with unique fingers to posture for gun carrying look, this mecha really stand tall and cool among the scale and worth to collect. 

RM279.00
img
SAVE RM115.90

MG 1/100 GN-001 Gundam Exia (Trans-am Mode)

  • Bandai's well-received MG Exia from Gundam OO, is here in its Trans Am colors for this edition! 
  • The popular machine comes sharply molded in color and incredibly flexible upon completion. 
  • It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release. 
  • Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath. 
  • Weapon: Its complete Seven Sword System are provided that consists of a GN Long Blade, a GN Short Blade, two GN Beam Daggers, two GN Beam Sabers, a GN Sword that can switch between rifle mode and gun mode, plus a GN Shield with sides that can slide out. A dedicated clear base is also included for displaying the detachable GN Drive, and a red cover part can be attached to the back of Gundam Exia in place of the GN Drive. 
  • Two same-scale figures (molded in white) of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail. Batteries are required to light its' chest. Repair part is not included. 
  • Weight:696g.

RM232.00
img
SAVE RM40.90

[054] HG 1/144 Gundam 00 Raiser + GN Sword III

  • Raiser + GN Sword III of the final battle specification is the product of a normal color!
  • Effects are clear parts. GN Sword II also included of course.
  • Sword mode rifle mode can be converted to GN Sword III.
  • Effects blade part of GN Sword III also reproduced in clear plastic.
  • Accessories: GN Sword III × 1, GN Sword II × 2, GN beam saber × 2, GN shield × 1

RM79.00
img
SAVE RM83.83

MG 1/100 Strike Gundam + IWSP

  • Featuring the IWSP Striker Pack and a darker toned Strike Gundam, this kit will definitely stand in any Master Grade collection! 
  • Massive 9.1m Anti-Ship Sword can be held for dynamic attacks.
  • Includes Display Base for space combat posing. 
  • Accessories: IWSP Striker Pack x1, Beam Rifle x1, Combined Shield x1, Armor Schneider x2, Anti-Ship Sword x1

RM168.00
img
SAVE RM89.90

MG 1/100 GAT-X105E Strike Noir

  • Mobile Suit Gundam SEED C.E. 73: STARGAZER’s iconic Strike Noir Gundam joins the Master Grade lineup! 
  • Design features a gimmick strengthening the Strike Noir’s characteristic wing structure.
  • Wing base features a strong frame- Inner frame constructed from ABS and reinforced with screws. 
  • Fragarach swords and “Shorty” Beam Rifles can be wielded akimbo.
  • Shoulder armor features full rotation, and inner frame features sliding gimmicks at the thigh.
  • Accessories: Beam Rifle x1, “Shorty” Beam Rifle x2, Fragarach 3 Beam Blade x2, High-Energy Beam Rifle x2, Rocket Anchor x2, 1/100 Pilot Figure x2, Shield x1

RM180.00
img
SAVE RM95.90

MG 1/100 Strike Freedom Gundam

  • This is a 1/100 scale (approx 189mm) model kit with movable joints.
  • The proportion has been re-arranged with liveliness, based on MG FREEDOM GUNDAM.
  • The wings unfold as seen on the animation, also installed with sliding gimmick.
  • The joints of the legs react with leg armors when moved.
  • The rail gun is also installed with retractile gimmick when opened.
  • Two beam sabers and two beam shields (made with extra thin PET) included.
  • 1/100 Kira Yamato (pilot ver and display ver) and 1/100 Lacus Clyne included.
  • Foil stickers, marking stickers and dry decal included.

RM192.00
img
SAVE RM79.90

MG 1/100 Strike Rouge Gundam

  • All the fabulous detail that you'd expect in a kit of this quality and scale,including Bandai's beloved dry-transfer decals and less-beloved clear stickers. 
  • A 1/20 scale unpainted figure of Cagalli, in flight suit, is included. Included a base stand, weapons such as 2 beam saber, beam gun, Shield, and pistol.

RM160.00
img
SAVE RM89.92

MG 1/100 Strike E + IWSP (Lukas Ornel's Custom)

  • More than just a color variation of the MG Strike Noir Gundam, this Master Grade kit of Lukas O'Donnell's Strike E comes with its I.W.S.P. (Integrated Weapons Striker Pack) unit and a plethora of weapons to boot! 
  • From "Mobile Suit Gundam Seed Frame Astrays" manga series, Lukas's Strike E features highly detailed inner mechanisms and a super-articulated inner frame that allow you to set it in a variety of dynamic poses. 
  • Weapons: 3 beam rifles, two beam rifle shorty, a combined shield with gatling gun, beam boomerang, two swords, and a Grand Slam sword. Stickers and dry transfers are included for markings. Stands included too!

RM179.90
img
SAVE RM75.90

MG 1/100 Gundam Deathscythe EW

  • It is the brand new frame compatible for the non-transforming 4 out of the 5 Gundams 
  • Derived from Wing Gundam Zero (Wing Gundam, Gundam Deathscythe, Gundam Heavyarms, Gundam Sandlock, & Shenron Gundam). 
  • The snap mechanism of the wrist has been employed, to increase the poseability with weapons in hand, the forward and backwards movement range has been obtained. 
  • Buster Shield: The beam effect part can be attached for the Claw Expanded mode. - Beam Scythe: The beam parts has been made with clear material, and can be detached. and equipped to the backpack. 
  • Katoki Hajime has designed the markings. 
  • Accessories: Beam Scythe, Buster Shield, Beam Parts for the Buster Shield Weight: 543g

RM152.00
img
SAVE RM192.90

PG 1/60 MS-06S Char's Zaku II

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

Weight : 1650g

RM468.00
img
SAVE RM100.90

PG 1/60 FX-550 Sky Grasper + Aile Striker

The perfect addition to your Perfect Grade Strike Gundam! The PG Skygrasper also comes with the Aile Striker; you can build and display them both on the included display base, or integrate them into PG Strike Gundam. All the parts are molded in colour and snap together for easy assembly; polycaps are included for joints, and Gundam Stickers are included for markings. Note: This is the only additional set designed to fit the PG Strike Gundam. 

Weight : 1046g

RM199.00
img
SAVE RM192.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM468.00
img
SAVE RM99.60

MG 1/100 RX-75 Guntank

  • Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  • Linked movement for the caterpillar, allowing flexible movement. 
  • Caterpillar has the feature of resistance to the surface when rotating. 
  • Dozato Carrier in front and behind the chassis can be deployed. 
  • Stands included to show the docking sequence of Core Fighter to Guntank. 
  • Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  • LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg

RM188.30
img
SAVE RM80.90

MG 1/100 Hyaku Shiki + Ballute Pack

  • A paintable Hyaku-Shiki! This fantastic master-grade kit comes with everything you need to build a supremely poseable Hyaku-Shiki, carrying the Ballute System. 
  • No gold plating means you can build the kit out of the box if you like (all the parts are coloured, naturally). 
  • Two teeny tiny 1/100 figures of Char I mean Quattro are included (one standing, one seated for the cockpit). Weight:860g

RM159.00
img
SAVE RM49.90

[007] NG 1/100 Grimgerde

  • The newest Mobile Suit Gundam: Iron-Blooded Orphans is the Grimgerde! 
  • Its internal frame recreates the look of the Valkyrie Frame. 
  • On the outside, its armor is up-detailed for 1/100! 
  • Its head opens, and of course, it’s armed with a rifle and two blades!

RM99.90
img
SAVE RM20.90

[259] SDBB Strike Gundam SWS

- BB-259 Strike Freedom Gundam SWS - Here we get a cute, deformed version of the popular Gundam Seed machine, the Strike Gundam with Striker Weapon System. Can be modified into any one of three other modes (Aile Strike Sword Strike, Launcher Strike); included is the weapon transport fighter "Sky Grasper". Pretty sophisticated for a little kit that runs just 1,000 yen! - Weight: 260g

RM39.00
img
SAVE RM10.50

[268] SDBB Justice Gundam

  • BB-268 Justice Gundam Simple instruction included in a box. Weight: 162g

RM25.40
img
SAVE RM26.10

HG 1/550 Mechanic RX-78GP03 Gundam Dendrobium

Yet another "wow" when I opened the box. A good affordable kit of the "Dendrobium" has been needed for a long time and Bandai finally serves one up. Hatches on the missile bays can be posed open or closed. The GP-03S is removable and slightly poseable. Claw units are poseable and you can have with or without the beam saber. Kit is largely snap-together but you do need cement and paint for the GP03S Steimen and the Garbera-Tetra.. Item Size/Weight : 32 x 19.3 x 8.4 cm / 430g

RM63.80
img
SAVE RM16.00

[288] SDBB Strike Freedom Gundam

  • BB-288 Strike Freedom Gundam Simple instruction included in a box. 
  • Weight: 500g The Strike Freedom Gundam gets the SD treatment; with gold-colored polycaps and bright foil stickers for detail, its pre-colored parts all snap together, so no glue or paint is required to finish it. 
  • A great kit for beginners, or an evening project for more experienced modellers who just want to have some fun!

RM31.90
img
SAVE RM16.00

[290] SDBB Destiny Gundam

- Also included is a pair of Palma Faciona hands [Shining Finger], comes in white color! - The best thing is the inclusion of transparent pink parts for the wings for its volture lumiere (however you spell it). BB-290 Destiny Gundam Simple instruction included in a box. Weight; 162g

RM31.90

Showing 21 - 50 of 2897 products