Price Clear







Gundam Model Kits

Showing 51 - 80 of 2552 products

img
SAVERM17.90

[064] HGUC 1/144 MS-05B Zaku I

  • Reproducible shoulder tackle.
  • Bazooka armed rack, Zakubazuka, Zaku machine gun, shield, Shutsurumu file
  • Usuto supplied, the Heat Hawk. Zakubazuka can be attached to the rear armor.
  • Mono movable by moving the lever on the back of the head.
  • The pursuit of the detail comes with a wrist.
  • The double elbow joints, expanding the range of movement

RM42.00
img
SAVERM41.90

[083] HGUC 1/144 MSN-03 Jagd Doga (Gunneys Guss Use)

  • Comes with a funnel effect in part, to reproduce conditions in space injection funnel. 
  • Detachable funnel in standby state, expanded state, a reproduction of a replacement. 
  • Mono moving head from side to side. Shoulder swing mechanism is adopted. 
  • Vernier Apojimota, give accurate details of the internal mechanism and so on. 
  • Supplied weapons, beam rifle, shield, and saber.

RM90.00
img
SAVERM41.90

[095] HGUC 1/144 RX-93 Hi-v Gundam

A 1/144 model of Izubuchi's mid 2000s Hi-Nu Gundam rendition featuring slimmer proportion and modern design aesthetic. From the novel, "Char's Counter Attack Beltorchika Children," the Hi-Nu possesses a large number of differences from the Nu Gundam including its bright blue coloring and differing weapon mount configuration. 


Accessories:
- 6 detachable funnels
- Beam rifle
- Hyper bazooka
- Beam saber

RM90.00
img
SAVERM59.90

[009] RG 1/144 Justice Gundam

  • 9th RG is burdened with the name of the [justice], Justice Gundam! RG elaborate detail to be Usually Mokuseyo 
  • Beam boomerang tip of the shoulder ... The shoulder is the first time a kit is removable, reproduce the beam boomerang. 
  • The exchange of palm (sold separately) ... RG RG compatible with Freedom Gundam Freedom Gundam, Machine can be reproduced in the play scene 2 holding hands. 
  • Connection for the stability of the body ... and ideas for the play Fato~umu -00 stable, equipped with a locking mechanism. In addition, parts are also included support for the display of state (horizontal) -00 Fato~umu during deployment. 
  • ... Lifter connecting portion is detachable reproduction, and the lifter body gimmick it can be stored back to the center. In addition, each battery, and the movable nozzle section. 
  • Equipped with a slide mechanism to reproduce the features of its own ... RG lifter by actual historical research. The aircraft during deployment Slide the left and right, extended width. By this gimmick, to shoulder a gun without a detachable part of Fato~umu -00 It is possible to move. 
  • ZAFT forces based on the GAT series was taken from the Union ZGMF-X09A Justice Gundam ... MS was developed. In the sister machine of Freedom Gundam, machines with N jammer canceller. - Accessories: beam saber, beam boomerang, shield, beam rifle, palm (right), Rifle hand grip (right) ( This is a machine translation. Please allow for possible misinterpretations in the text. ) 
  • Item Size : 31 x 19 x 8 cm

RM90.00
img
SAVERM71.90

MG 1/100 MSM-07S Char's ZGok

  • ZGok Char customise with shining Red ver!
  • The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series.
  • The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. - Weapon: 4 iron jaws

RM108.00
RM108.00 Add to cart
img
SAVERM95.90

MG 1/100 Buster Gundam

  • Built for heavy-duty combat, the Buster Gundam is an artillery unit specializing in long-range assault! 
  • Characterised by its two massive cannons, the Buster Gundam's iconic look has been redesigned for maximum detail, and it's SEED-specific X100 frame gives it outstanding maneuverability!
  • Full of arms-specific gimmicks! 
  • Recreate the massive Hyper Impulse Long-Range Sniper Rifle by docking the two smaller weapons together! 
  • Gun barrel equipped with pump-action gimmick for realistic action.
  • The dual sub-arms are equipped with a movement gimmick and can hold the huge weapons for dynamic firing poses.
  • Shoulder-mounted missile hatches open.
  • One of the five Gundams built under the Earth Alliance's G Project, the GAT-X103 Buster Gundam was created on the versatile X100 Frame, and designed to overwhelm any gunfight with its massive firepower.
  • Accessories: 350mm Gun Launcher, 94mm High-Energy Rifle,
  • Fist (Left and Right), Open Palm (Left and Right)

RM144.00
RM144.00 Add to cart
img
SAVERM115.10

MG 1/100 GAT X-303 Aegis Gundam

  • Accessories: high-energy beam rifle 60mm, beam saber × 4, beam pair shielded, Hand grip (left and right), palm (left and right) - Item Size / Weight : 39 x 31 x 8 cm / 791g


Technical Data

  • Model number: GAT-X303
  • Code name: Aegis Gundam
  • Unit type: prototype attack use transformable mobile suit
  • Manufacturer: Morgenroete, Inc
  • Operator(s): Earth Alliance; ZAFT (Zodiac Alliance of Freedom Treaty)
  • First deployment: 25 January C.E. 71
  • Accommodation: pilot only, in standard cockpit in torso
  • Dimensions: head height 18.86 meters
  • Weight: max gross weight 79.6 metric tons
  • Armor materials: unknown
  • Power plant: ultra compact energy battery, power output rating unknown
  • Propulsion: unknown 


According to wikipedia

GAT-X303 Aegis is a prototype transformable attack-use mobile weapon, it is featured in the anime series Mobile Suit Gundam SEED. The unit is piloted by Athrun Zala.

The Aegis is a commander-type mobile suit with very advanced sensors and heavy attack power. It can transform into a mobile armor configuration armed with a "Scylla" 580mm energy cannon (which is later mounted on the GAT-X131 Calamity Gundam). This cannon is powerful enough to destroy even a spaceship. Additionally, the suit also features a hand-held 60mm beam rifle. For close-range combat, Aegis is equipped with 4 beam sabers. As these weapons are mounted on the forearms and feet rather than hand-carried, all four can be wielded simultaneously, in either mobile suit or mobile armor configuration. Like most other mobile suits, the Aegis is equipped with two "Igelstellung" 75mm multi-barrel CIWS in its head. Lastly for defense the suit mounts a single shield on its left arm and is equipped with the Phase Shift armor system.

Designed as a command-type mobile suit by the Earth Alliance, the Aegis was one of the original five mobile suits created as part of the Atlantic Federation's G Project. The Aegis eventually was rolled out on January 20, CE 71, together with the other suits produced as part of the project. Stored in the colony Heliopolis, it became the target of ZAFT and, together with all but one of the prototype mobile suits, was stolen by them on January 25. Its pilot is Athrun Zala, who then used the suit for several months.

The Aegis is transported to Earth shortly after the Battle of Orbit on February 13 to pursue the Archangel. It is held at the Carpentaria Base in Australia until the Archangel passed through the Indian Ocean, where it was sent to rendezvous with the Vosgulov-class submarine Cousteau. The Aegis, GAT-X102 Duel, GAT-X103 Buster and GAT-X207 Blitz successfully intercepted the Archangel in midocean and forced the heavily damaged assault ship to lay over at Orb for repairs.

Finally, its destruction occured in late May while fighting Kira Yamato in the GAT-X105 Strike and Tolle Koenig in his FX-550 Skygrasper. Athrun self-destructed the Aegis while grappling the Strike, destroying both units. He ejected before self-destruction and was found injured on the shore by Cagalli Yula Athha. Later in that year, he returned to combat piloting the new, Aegis-derived ZGMF-X09A Justice. From June to the end of the war he piloted the Justice as part of the Clyne Faction, alongside Kira Yamato in the ZGMF-X10A Freedom.

The fragments of the destroyed mobile suit eventually found their final, peaceful use as a playground for young children, on the same island where Athrun and Kira fought. Its shield was later found and sold at the black market auction for junk where Lowe Guele picked up the TMF/TR-2 BuCUE Tactical Reconnaissance Type which head he used temporarily for his MBF-P02 Astray Red Frame. A variation on its transforming system is used by ZAFT, on a much larger scale, in the ZGMF-X11A Regenerate.  

After the war, the Earth Alliance produced another Aegis which was then upgraded by Actaeon Industries into the GAT-X303AA Rosso Aegis.


Weapons

  • CIWS guns: Mounted in the Aegis's head are two "Igelstellung" 75mm multi-barrel CIWS guns. These light projectile weapons are used to intercept missiles and to destroy lightly armored vehicles, although it is classified as Anti Air.

  • Beam Saber: Aegis is equipped with 4 beam sabers that are mounted on the forearms and feet rather than hand-carried, all four can be wielded simultaneously, in either mobile suit or mobile armor configuration.

  • Shield:A simple metal shield that can be mounted on its left arm.

  • Scylla Canon: A powerful energy cannon that is only able to be fired in its mobile armor configuration. The weapon has enough power to tear through the entire width of an Earth Alliance battle ship.

  • Beam Rifle:For ranged combat the Aegis Gundam mounts a 60mm high-energy beam rifle.


Author p/s: In comparison with NG 1/100 Aegis Gundam, there were alot of huge differences in term of mobility of the modelling kits, the detailed of the armor, and the ability of transformation is another unique buying point for this gundam kit too, MUST BUY item!!

RM172.80
RM172.80 Add to cart
img
SAVERM159.90

MG 1/100 RX-93 Nu Gundam Ver.Ka

  • Accessories: beam rifle, shield, beam saber, beam saber (small), Fin funnel x? 6 
  • Item Size : 39 x 31 x 12 cm / 1163g


According to wikipedia

The RX-93 ? Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was piloted by Amuro Ray.

The ? Gundam was one of the most advanced mobile suits of its time in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, designed and used by Amuro Ray himself during the Second Neo Zeon War. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average value of specifications of each successive generations of Gundam-type units from the the original Gundam to the ?? Gundam, and updated with state-of-the-art technologies introduced at the time.

The ? Gundam's design also focuses on versatility and operational aspects as well as emphasis on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycoframe, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.

Although its development was only partially completed at the time of its deployment, the ? Gundam proved itself to be a formidable mobile suit. The operating data obtained from the Silver Bullet (Funnel Test Type) was used in its development. It is the first Gundam-type machine to be equipped with Funnels. A newly developed MS control program is installed to account for the ? Gundam's center of mass during the separation and movement of the Funnel equipment.

Incorporating the Psycoframe technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ? Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a suitable Newtype pilot. When combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art mobile suit was able to almost single-handedly hold the whole Neo Zeon force by just itself, and its Psycoframe was put to the test to determine the history of humanity living on earth.

Following Amuro's failure to stop Char in attempting to drop Fifth Luna, Amuro decided to design a mobile suit that would be able to combat Char's MSN-04 Sazabi. This machine, the RX-93 Nu Gundam, was designed not only to be the true upgrade to the RX-78-2 Gundam, but also to be the ultimate Gundam. Unknown to Amuro, though, Char realized this would be the case and allowed Anaheim Electronics to pass on the psycho-frame technology for the Nu Gundam's use. However, testing of this machine would be interrupted when fighting between Londo Bell and Neo Zeon forces force Amuro and his girlfriend Chan Agi to take the half-completed Nu Gundam with them to save everyone.

Sadly, the lack of testing would easily been shown when, during one skirmish, Amuro's panicking caused his fin funnels to react, forcing Gyunei Guss to kill his captive, Kayra Su. As Londo Bell forces moved to stop Char from dropping Axis, Amuro and Char would go head to head, battling one another and practically ravaging their suits. In the end, another flaw revealed itself - the psycho-frame resonated with high emotions, pushing Amuro's already amazing Newtype powers to new heights, and managed to push Axis away from the Earth. The resonance creates a light that could be seen from Earth. The fate of both pilots however is unknown and remains a big mystery even to this day.


Weapons 

  • Beam Rifle - A high-powered beam rifle with a normal output of 3.8MW. It can be recharged by e-caps and with a greater fire rate than most beam rifles.

  • Beam Saber - The ? Gundam has a standard-issue beam saber stored on its left forearm, which can be drawn quickly to attack enemies in close range.

  • Fin Funnels - A form of remote weapon unique to the ? Gundam. Despite their name, the fin funnels equipped on ? Gundam are in function "bits", since they have built-in generators rather than the E-caps used by funnels. While this made them much more expensive to construct, and allowed less modules to be equipping than the standard, this had the enormous benefit of giving the fin funnels a tremendously long operational time. Circling the battlefield on their own, the fin funnels could be utilized in far more creative and strategic ways than standard funnels. Model number: AEV/PFF93AR.The actual beam fired by the fin funnels was also more powerful, given that they are emitted by a generator instead of an E-cap. The fin funnels also had the ability to generate a unique beam shield, known as a "fin funnel barrier", to provide a defense against both beam weaponry and solid projectiles with lower outputs compared to the beam shield's power consumption. Although these unique funnels proved incredibly effective and flexible in purpose, they were also much larger than the standard funnel, making them easier targets to shoot down. With the help of the Psycoframe technology, Amuro can utilize its fin funnels more effectively by thoughts alone.

  • v-Hyper Bazooka - 280mm bazooka that can be fired from its position on the backpack.

  • Shield - Issued on the ? Gundam is a custom shield emblazoned with Amuro's emblem. It features a built-in beam cannon and missile launchers. Amuro uses it in many strategic ways, such as fooling enemies that he was shot down by leaving the shield and the v-Hyper Bazooka, and attacking enemies once they lower their guards.

  • Large Beam Saber - Stored on the backpack, this beam saber presumably has a higher power rating than the saber stored on the left wrist and is used more often than the standard saber. The saber's pommel is capable of emitting a beam dagger on its end, but it is never seen used.

  • Vulcan Guns - Two head mounted 90mm vulcan guns that have been seen to shred armor.

  • Birdlime launchers - Fires an adhesive substance from the hands that can be used to repair small cracks in colony wall or to restrain soldiers on foot.

  • Dummy Launchers - Stored in the hands the launchers can deploy mobile suit sized dummy balloons as a decoys.

  • Psycoframe cockpit - The cockpit is composed of microscopic Psycommu receptors that allows the pilot to control the suit as if it is his/her own body.

RM260.00
RM260.00 Add to cart
img
SAVERM26.90

[146] HGUC 1/144 RGM-79SP GM Sniper II

  • A long-range heavy hitter, the most powerful GM of the One Year War finally joins the HGUC lineup!
  • Visor can be opened and closed.
  • Rifle firing prose can be replicated.
  • Appearing in the fan favorite anime Mobile Suit Gundam 0080: War in the Pocket, the powerful GM Sniper. Designed off the bones of the GM 
  • Sniper Custom, this updated Suit features long distance sniping ability, powerful overall performance. Made for ace MS pilots, only a few 
  • were created before the war's end. 
  • Accessories: 90mm Bullpup Machine Gun, Sniper Rifle, Shield, Beam Saber x2, Manipulator x5

RM62.00
img
SAVERM32.90

[145] HGUC 1/144 Hambrabi

  • Blasting out of Mobile Suit Zeta Gundam, ace pilot Yazan Gable`s transformable MS joins the High Grade line after 20 years! 
  • Features a a ton of weapons and a transformation gimmick to shift into MA mode!
  • In addition to the Suit`s signature Sea Snake weapon, this kit includes the massive Feyadeen Rifle and beam saber! 
  • Features manipulator replacement for easy transformation.
  • Officially adopted by the Titans as an variable Mobile Suit, the RX-139 Hambrabi features a simplified frame and a bevy of powerful electromagnetic weaponry! 
  • Accessories: Beam Saber ×2, Sea Snake, Feyadeen Rifle, Grip Manipulator (Left, Right),
  • Fist (Left and Right), Palm (Left and Right)
  • Item Size/Weight : 31.1 x 19.1 x 7.2 cm / 297g

RM68.00
img
SAVERM119.90

MG 1/100 ZGMF-X19A Infinite Justice Gundam

  • Weapon Accessories: rifle, saber, shield, beam shield, Grapple Stinger. 
  • Effects included: Saber, Blade Beam (leg, wing), beam boomerang, beam Shielding.
  • Figures included: Athrun Zala of 1 / 100 size (for cockpit, standing postures).
  • Action base is not included

RM180.00
RM180.00 Add to cart
img
SAVERM71.90

[010] RG 1/144 Zeta Gundam

  • RG Series A New undergone into new, 10th bullet is memorable Zeta Gundam!
  • RG series that appeared to commemorate the 30th anniversary of Gundam. Two years from the start-up series. Of Gunpla
  • As its 10th anniversary of RG series you should aggregating the technology that can have, the pursuit of real, finally
  • Zeta Gundam appeared -.
  • The actual own investigation RG, accurately reproduced in 1/144 scale mechanisms of Zeta Gundam!
  • Adopt a new joint MS Advanced mode.
  • Comes with realistic decals.
  • Accessories: beam rifle, shield, grenade × 2, beam saber × 2,
  • Shield launcher, action-based support joint 2, 1/144 pilot figure (Camille)

RM108.00
RM108.00 Add to cart
img
SAVERM43.90

[086] HGUC 1/144 RX-93 Nu Gundam

  • Item Size/Weight : 31 x 20 x 9.3 cm
  • Weight: 552g
  • Accessories: beam rifle, shield, New Hyper Bazooka, Beam Saber
  • Comes with installation manual + snap & fit.
Similar Nu Gundam Modelling kit you may found on our website:

RM105.00
RM105.00 Add to cart
img
SAVERM27.90

[052] HGUC 1/144 RMS-108 Marasai Gundam

  • Item Size/Weight : 31 x 19 x 7 cm / 295g
  • Snap and fits conditions, comes with minor decals.
  • Normal mobility, but looks quite flexible and nice curve in the gundam modelling kits.
  • Weapons included are: beam saber x2 (yellow color), vulcan gun, and beam rifle.

RM56.00
img
SAVERM59.90

[011] RG 1/144 Destiny Gundam

  • RG 11 bullet will be Destiny Gundam protagonist machine [Mobile Suit Gundam SEED DESTINY]
  • Finally here!
  • Also made by the Freedom Gundam ZAFT, Gundam and Justice
  • Destiny Gundam. Dropped into the [real] and its setting in this product,
  • Are using the Advanced mode in common with MS MS joint above. However,
  • At the same time to pursue your own settings to reproduce the Destiny Gundam, the exterior parts
  • How to install or Ikashi are the ones that are different from the previous two products RG series of body
  • Has become.
  • Armored division fine considering the actual machine, unique feature of RG. Such as the joints,
  • You can put a realistic decals, plans to reproduce the metal-like texture.
  • Also boasts a wide range of range of movement in the air `` poses unique appearance ?? SEED
  • Advanced mode can be reproduced by the joint MS.
  • Long-range beam cannon weapon variety, such as a beam shield included.
  • Also a characteristic wing, three-dimensional by actual investigation. Can be replicated gimmick wings and weapons deployment.
  • Accessories: beam rifle, beam saber ? 2, beam shield, shield,
  • Beam boomerang ? 2, beam sword, long-range beam cannon

RM90.00
img
SAVERM163.90

MG 1/100 MSN-06S Sinanju

  • Accessories: Rifle only, dedicated shield, beam saber x? 2, Beam A-xe x? 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  • The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
  • Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
  • The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
  • With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".

RM285.00
RM285.00 Add to cart
img
SAVERM31.90

[155] HGUC 1/144 Gundam Ez8

New model of the popular machine from the Ova 08th MS Team features enhanced articulation and new refined proportion. Beam rifle, shield, beam saber and machine gun included. Parachute pack may be interchanged with backpack on HGUC RX79[G] Gundam.

Accessories: 
- Beam rifle
- 100mm machine gun
- Shield
- Beam saber x 2
- Parachute pack
- Hand grip for saber (left and right)
- Hand holding rifle (right)
- Fist (left)

RM64.00
img
SAVERM21.90

[158] HGUC 1/144 Base Jabber Type 89

  • Accessories: one corresponding joint action based

RM50.00
img
SAVERM15.90

[008] HGUC 1/144 MSM-03 Gogg

An aquatic mobile suit used by Zeon from Mobile Suit Gundam with its trade mark sharp claws. Arms can detach to recreate appearance while cruising through the ocean waters.

RM32.00
img
SAVERM22.70

[016] HGUC 1/144 MS-14F Gelgoog Marine

HGUC 1/144 #16 Gelgoog Marine
Product Description
Based on the Mobile Suit Gundam 0083: Stardust Memory anime, this MS-14F Gelgoog Marine model kit is in the 1/144 scale and becomes a fully articulated figure once built. Accessories include a beam rifle, machine gun, beam sabre and shield.

Product Features
- 1/144 Scale
- Made of plastic
- Based on Mobile Suit Gundam
- Part of the High Grade Universal Century model kit line

Instructions may or may not include English translation
No glue required for assembly, a hobby nipper is required to remove parts from runners

Box Contents
- Pieces to build
- Gelgoog Marine
- Machine gun
- Beam saber
- Shield
- Instructions

RM49.20
img
SAVERM26.90

[017] HGUC 1/144 MS-09F Dom Tropen

A Dom variant from Gundam 0083, it carries a Rakuten bazooka with spare ammo cartridges and heat saber. Undersides of model feature immense surface detail In feet and thruster regions.

RM62.00
img
SAVERM32.90

[022] HGUC 1/144 MSN-02 Zeong

This plastic model kit of the big mech has moveable everything, including the fingers! The thruster assemblies pivot. Head detaches, and hands detach and can be mounted on bendable cables (included). As usual the parts are pre-colored and snap together. While paint is not required for this model, it certainly would add a realistic appearance to the final product. Instructions are in Japanese but extremely well illustrated so anyone can follow them.


RM75.00
img
SAVERM37.90

[035] HGUC 1/144 RX-178+FXA-05D Super Gundam

Coalescence of deformable Gundam Mk-II.

- Flight mode can be replicated only G-Defensor.
- Reproduce the transformation gimmick of the street setting.

( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 31 x 19 x 8 cm / 421g

RM82.00
img
SAVERM45.90

[036] HGUC 1/144 PMX-003 The-O

Personal suit of Paptimus Sirocco in the Zeta Gundam TV series, its large bulk is covered in maneuvering Vernier's allowing it to be quite agile. Comes with beam rifle and beam sabers and under skirt manipulator arms.

RM98.00
img
SAVERM41.90

[042] HGUC 1/144 ORX-005 Gaplant

[042] HGUC 1/144 ORX-005 Gaplant


Box contents
  • Pieces to build
    • Gaplant
    • Beam saber
    • Display stand
  • Instructions

RM90.00
img
SAVERM28.90

[047] HGUC 1/144 RX-78 NT-1 Gundam ALEX

  • The main Gundam from the hugely popular OVA Gundam 0080 A Stardust Memory is a very stylish kit. In High Grade 1/144 scale the NT-1 Alex comes with a removable Chobham armor that allows you to switch between the heavily armored version and the normal version. The Alex also comes wiht a Beam Rifle and Shield as well as an openable hatch on the forearm that reveals a gatling gun and a Beam Saber.

RM60.00
img
SAVERM10.90

SD Ex-Standard Destiny Gundam

Part of the SD Gundam EX-Standard product line, the Destiny Gundam has been recreated with an emphasis on articulation and enhanced proportion at an attractive price. Weapons include High energy beam rifle, long-range cannon, and anti-ship sword that can be mounted on back.

RM25.00
img
SAVERM30.90

[059] HGUC 1/144 MS-09 Dom / MS-09R Rick Dom

  • [059] HGUC 1/144 MS-09 Dom / MS-09R Rick Dom
  • The MS-09R Rick Dom is a mass production space combat mobile suit and a variant of the MS-09B Dom

RM70.00
img
SAVERM6.00

Third Party Brand HG 1/144 MHF-01Ω Load Astray Ω Omega (with Fluorescence Water Decal)

Third Party Brand HG Load Astray Omega


Brand : WeiMei
Model : HG Load Astray Omega
Grade : High Grade

Bonus : Come with Fluorescence Water Decal

Please note that this is NOT Bandai product

RM32.00
img
SAVERM31.90

[076] HGUC 1/144 MS-14A Gelgoog / MS-14C Gelgoog Cannon

[076] HGUC 1/144 MS-14A Gelgoog / MS-14C Gelgoog Cannon


Grade : HG
Scale : 1/144

RM64.00

Showing 51 - 80 of 2552 products