• Home
  • Gundam Model Kits

Gundam Model Kits

Showing 1 - 30 of 148 products

Quick View
img
SAVE RM69.70

RE/100 MS-08TX [EXAM] Efreet Custom

  • The Efreet Custom, long popular in games and side stories, is finally a kit! 
  • Its charm is emphasized by the RE/100 series’ refined construction, detailed exteriors, and easy but flexible assembly. 
  • Translucent parts are used for its backpack-stowable heat saber. 
  • Its hexa-linked missile pod is mounted on a polycap-shaft joint for removability and adjustability!

RM140.00
Add to cart
Quick View
img
SAVE RM91.90

MG 1/100 MSA-0011 S Gundam

A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 


Although the S Gundam had three separate cockpits, the other two were not used until the very end of the plot, where three pilots would be saved by the core block system (see below). Since its plans are highly classified, it is said in chapter 1, Revolt in Pezun, that the pilots have been only able to train in Z Plus B types, which are the highest performance transformable mobile suit they have access to. The S Gundam is equipped with relatively heavier armour than its Z Plus cousin, which is specifically mentioned in the story (Chapter 2:Sally Forth! S Gundam) where the 2 Z Plus C1 accompanying the S Gundam in its booster configuration took more damage even though S Gundam was at a much higher acceleration when against enemy fire. To further confirm this point, the author mentions that the pilot cannot even bear to imagine what will happen if they are using Neros or GM IIIs in the same situation. Within the design notes, the offensive capabilities of the S Gundam featured a highly accurate beam smart gun, with 12MW power operating the beam smart gun normally, the unit can connect the beam smart gun to two extra power outlets on both left and right hips or the centre of its belly, to supply extra power that increases the beam smart gun up to 56MW. 

However, this will have to sacrifice the mounting of one of the two 12MW beam guns that are similar to the ones used in the Zeta Plus mobile suit series. Two beam cannons protruded from the S Gundam's backpack over the shoulders, and it also featured four 60 mm vulcans in the tail stabilizer and four 60 mm vulcan guns in the head, in which the mechanical designer, Katoki Hajime, specially took the problems of this weapon in the pass series into account, including the barrel length being too short which means the weapon can only have grenade launcher effects as well as no space for ammo, and lengthened the barrel (also the depth of the head of S Gundam) and introduced the liquid explosives electronic firing mechanism to the design[2], in which later retconed earlier designs and is again mentioned in Gundam Officials, the Gundam Encyclopedia and Master Grade instructions. It also featured a red circular-shaped wire-guided remote beam weapon called an Incom that was stored in the forehead. And finally, to round out the S Gundam's weaponry, the unit featured two beam sabers stored in recharge racks in the small white protrusions in the unit's knees. The S Gundam is built on a modular design, made up of two separate transformable units that could combine with a core fighter variant called the G Core to create the full S Gundam. The S Gundam was capable of separating into the 3 crafts. The G-Attacker (also referred to as the A Parts) is one of the crafts, which was made up of the upper torso area of the S Gundam. The second craft was called the G-Bomber (also referred to as the B Parts), which were composed of the lower torso and legs of the S Gundam. 

The G-Core core fighter, which were the C Parts of the S Gundam, was flown by Ryu Roots. The story used this mechanism as a make shift role for the task force alpha not having enough mobile suits for the battle and has to compromise by separating the S Gundam for 3 pilots in chapter 12, Pursuit. The author also made his own disbelieve in combining robots[4] in the midst of battle into the plot, where S Gundam is forced to combine back into the mobile suit form and sacrifice of the 3 pilots' instructor was made by being their shield in order to buy them time for the combination in chapter 13, Triple Attack. A.L.I.C.E. The S Gundam in Gundam Sentinel featured a unique and incredibly complex artificial intelligence computer that went by the acronym name A.L.I.C.E., which was developed by Ryu Roots' mother, Meith Roots. A.L.I.C.E., which stood for Advanced Logistic & Inconsequence Cognizing Equipment, was more than the standard learning computer featured in earlier mobile suits; "she" had the capability to think and to grow. The growth of ALICE is one of the main plot lines to the story, compared to the growth of the main character Ryu Roots. In "her" early stages of growth ALICE was not yet a full individual, but "her" experiences with Ryu Roots would help "her" to grow. ALICE is originally programmed to place the pilot(s) life as first priority, and could assume total control of the S Gundam if "she" felt that the unit was in danger. 

This function has been used throughout the plot to save the pilot's life and caused confusion to the pilot since Ryu Roots has no knowledge of ALICE's existence even towards the very end of the story. Although 4 S Gundams have been produced, it is known that the other 3 S Gundams do not have the ALICE system installed on it. 

Stories source from: http://en.wikipedia.org Total 505pcs parts Simple Instruction included in a box.

RM239.00
Add to cart
Quick View
img
SAVE RM117.90

MEGA SIZE 1/48 MS-06S Char's Zaku II

  • Char's Zaku came from all Gandamufan Megasaizumoderu dedicated to big models! 
  • Ease to assemble the pipe liner lock mechanism in the adoption of power! Of course, also supports moving! 
  • Daburusepareta mono eye is included in the mobile! 
  • Children's fingers can easily å‹•Kasemasu. 
  • Their own tools - and is ... Megasaizumoderu Daburusepareta to help take the parts from the runner. 
  • RG also adopted a new panel line. 
  • Without any discomfort - RG Megasaizugandamu reproduced alongside the panel lines. 
  • RG shape conforms to the design of the backpack! 
  • Great! Easy to make! Fun! Megasaizumoderu POINT1: No special tools required for assembly. Nipper can not use. 
  • POINT2: Snap adopted without glue to assemble. 
  • POINT3: hearty! Ganpurasuteppuappumanyuaru come. 
  • POINT4: fun and fast-lock type runner. 
  • POINT5: Easy to assemble in Daburusepareta. 
  • POINT6: assembly instructions and color illustrations, intuitive icons that the necessary parts (symbols) is adopted. 
  • POINT7: Iropura because, without a finished painting cool! 
  • POINT8: uses a special decal, Ditiruappu challenge! 
  • Accessories: Zaku machine gun, heat hawk

RM312.00
Add to cart
Quick View
img
SAVE RM117.90

MEGA SIZE 1/48 MS-06F Zaku II

  • Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 

RM312.00
Add to cart
Quick View
img
SAVE RM30.00

[070] HGUC 1/144 MS-14S Gelgoog Char Custom

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

RM59.90
Add to cart
Quick View
img
SAVE RM69.90

MG 1/100 MS-06F Zaku II Ver.2.0

  • A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  • With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  • Inner frame designed to accommodate a wide variety of Zaku designs.
  • Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Inner frame features a shell for the massive shoulder armor.
  • Outer shoulder armor is recreated with detachable spikes.
  • Redesigned ankle link boasts improved performance. 
  • New mobile dual action mechanism improves leg joint performance .
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM140.00
Add to cart
Quick View
img
SAVE RM49.90

[004] RG 1/144 MS-06F Zaku II

  • Zaku II, which sustains the massive military potential of Zeon, joins in the RG series. Mounted the Real system. 
  • The head parts include two kinds of antennas for commander, and a head for ordinary soldier. 
  • F type armor is faithfully reproduced. 
  • Various hand parts are included. The right hand has better gripping force to hold the rifle. The left flat hand makes it look more expressive. 
  • Adopted the ""Advanced MS joint"". 
  • The ""Realistic decal"" makes it possible to reproduce mechanical texture. 
  • Runner x9, Realistic decal x1, Instruction manual

RM100.00
Add to cart
Quick View
img
SAVE RM195.61

MG 1/100 G Armor Real Type Color

  • - "Mobile Suit Gundam" G armor of Real Type Color (Gundam+G armor) that got into the news occasioned of the boom at the broadcasting this time with the movie poster etc. 
  • is reproduced. Another marking etc. attached are newly scheduled. - Can be combined with the G-Fighter and Gundam to create "G-Armor," "G-Sky," "G-Sky Easy," "G-Bull," "G-Bull Easy," and "Gundam High Mobility" modes! 
  • Main body and others accessory - Beam rifle: 1 - Beam saber: 2 - Shield: 2 - Hyper bazooka: 1 - Collaboration only for action base: 1

RM392.00
Add to cart
Quick View
img
SAVE RM23.00

[077] HGUC 1/144 Blue Destiny Unit 2

  • MS appeared in the person to be judged Mobile Suit Gundam Gaiden] Sega Saturn
  • Commercialized in HGUC series [Blue Destiny Unit 2].
  • Groin axis movable to reproduce the rifle poised by Standing knee.
  • In addition to the normal moving around, the shaft shoulder is also reproduced on the mobile, can reproduce the scene more realistic shooting.
  • Sort deployed in parts with the same storage unit on the outside of the shin saber reproduce the internal mechanism.
  • Marking included.

RM59.90
Add to cart
Quick View
img
SAVE RM56.90

MG 1/100 RX-78-2 Gundam Ver.Ka

Taken straight from the art of Katoki Hajime comes this Master Grade version of the RX-78-2. With all the detail we've come to expect from the Master Grade line -- a poseable inner frame with armour laid over the top of it -- this is definitely one for your display case! Parts are molded in colour and snap together for ease in assembly; no paint or glue are required.

RM135.00
Add to cart
Quick View
img
SAVE RM69.90

MG 1/100 Char's Zaku II Ver.2.0

  • Here's Char's Zaku II, getting a "Ver. 2.0" update more than a decade after its first MG kit release. 
  • This kit features a completely revamped inner frame construction that allows for even greater range of articulation and realistic movement; it's even able to be posed kneeling on one leg as seen in the show! 
  • Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly. 
  • Weapons include a Zaku machine gun, Zaku bazooka, and a heat hawk. Two types of blade antennas are included along with a lift vehicle to bring the included 1/100-scale standing Char Aznable (molded in red) to the cockpit.

RM140.00
Add to cart
Quick View
img
SAVE RM62.90

MG 1/100 MSM-07S Char's ZGok

  • ZGok Char customise with shining Red ver! 
  • The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series. 
  • The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. - Weapon: 4 iron jaws

RM117.00
Add to cart
Quick View
img
SAVE RM29.00

[080] HGUC 1/144 Blue Destiny Unit 1

RM59.90
Add to cart
Quick View
img
SAVE RM33.50

[151] HGUC 1/144 Black Tri-Stars Zaku II

  • Accessories: - Zaku bazooka, Zaku-machine gun, Heat Hawk, shield weapon rack, fist (left), for hand holding rifle (left and right), for hand held saber (right)

RM62.40
Add to cart
Quick View
img
SAVE RM33.50

[154] HGUC 1/144 MS-06R-1A Zaku II (Shin Matsunaga Custom)

The MS-06FS Zaku II (Shin Matsunaga Custom) is a mobile suit from the MSV-R series. It was the personal unit of Shin Matsunaga.

Similar to Garma Zabi's MS-06FS Zaku II (Garma Zabi Custom), the MS-06FS Zaku II (Shin Matsunaga Custom) is a custom mobile suit piloted by lieutenant Shin Matsunaga. It has been subjected to performance tune-ups requested by him, in addition, its mobility pushes the performance limits of the FS Type.

RM62.40
Add to cart
Quick View
img
SAVE RM14.90

[008] HGUC 1/144 MSM-03 Gogg

RM33.00
Add to cart
Quick View
img
SAVE RM69.90

MG 1/100 MS-06J Zaku II Ver 2.0

  • A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  • With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  • Inner frame designed to accommodate a wide variety of Zaku designs.
  • Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Inner frame features a shell for the massive shoulder armor.
  • Outer shoulder armor is recreated with detachable spikes.
  • Redesigned ankle link boasts improved performance. 
  • New mobile dual action mechanism improves leg joint performance .
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM140.00
Add to cart
Quick View
img
SAVE RM51.90

[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 

RM98.00
Add to cart
Quick View
img
SAVE RM74.40

MG 1/100 YMS-15 Gyan

  • From the anime Mobile Suit Gundam, ace pilot M’Quve’s signature Suit joins the Master Grade lineup! 
  • Double hip joints allow wide, sweeping range of motion in the hips. 
  • LED light up gimmick in the sword uses a CR1220 coin battery (sold separately) for dynamic display options! .
  • Shield features a complex internal structure and can store Hide Bombs (Hide Bombs included for deployed or stored state.)
  • Includes M’Quve figure in 1/100 scale and 1/20 scale.
  • Accessories: Beam Sword x1, Shield x1

RM141.50
Add to cart
Quick View
img
SAVE RM159.90

MG 1/100 Shin Musha Gundam (Sengoku No Jin)

  • From the popular game series Dynasty Warriors Gundam, the Hajime Katoki-designed Musha Gundam is realized as a Master Grade kit! 
  • Utilizing the frame created for the Rx-78-2 Ver. OYW and clever parts separation, along with gimmicks for moving armor sections all add up one impressive Suit! 
  • Various weapons included, all of which can be mounted on the Suit for quick storage- the sword at the hip, and the other weapons mounted on the backpack. 
  • [Artillery Tanegashima] (rifle), [Tachi sun circle] (sword), comes equipped with a [spear diffuse round],
  • [Halberd lightning round] is attached. To the left hip armor the sword, spear, artillery, (each equipped with halberd armed to
  • It can be equipped with a backpack. )
  • Accessories: Nichirinmaru , Tanegashima Gun, Sankoumaru Jumonji Yari, Denkoumaru Naginata, Folding Screen, Spear Stand x2, Gun/Sword Stand


    Item Size/Weight : 39.2 x 31.3 x 12.5 cm / 1163g

RM320.00
Add to cart
Quick View
img
SAVE RM30.00

P-Bandai Exclusive: RG 1/144 RX-78/C.A. Casval Gundam

  • RX-78/C.A. Casval Gundam finally appear in Real Grade model kits.
  • Comes with armor: beam rifle / Hyper Bazooka / beam saber / shield.
  • Suitable for age 15 and above / no abrasive is needed during assemble process.

RM190.00
Add to cart
Quick View
img
SAVE RM78.90

MG 1/100 MS-07B Gouf

This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.  

A Mobile Suit made famous at the hands of ace pilot Lieutenant Ramba Ral, the MS-07B Gouf is a high-performance machine that strikes fear in its opponents with its powerful Heat Saber and Heat Rod at its disposal. This much-anticipated "Version 2.0" update to its 2000-released Master Grade kit not only utilizes the same amazingly detailed and super-poseable inner frame from MG MS-06J Zaku II Ver. 2.0, Bandai went a step further in enhancing the inner frame to allow for wider range of posing possibilities and smoother movements! Both the front and side skirt armor parts are linked together so that the side skirt armor will slide back when the front skirt armor is moved upwards so as to not restrict the Mobile Suit's movements.

In pursuit of easing the assembly process for modelers, Bandai came up with an ingenious method of molding each individual section of the pipe cover in straight rows on the plastic runner so you can easily insert the power pipe through each row of pipe covers and snap each of them off without having to individually cut and slide each piece to the power pipe! That'll shave off at least a few minutes of assembly time!

Its signature weaponry includes a shield, a Heat Saber, a Heat Rod, and a Finger Vulcan for its left hand. A regular manipulator left hand is also included to replace the Finger Vulcan if you so desire. Each section of the Heat Rod is ball-jointed so you can bend it into any shape you want! The blade part of the Heat Saber is made of clear orange, and the Mobile Suit's cockpit can slide open to reveal a sitting-pose pilot figure (molded in light blue). Also packed in the set are in-scale figures (molded in light blue) of Ramba Ral and his aide Crowley Hamon. A sheet of stickers and dry-transfer markings are included.

RM149.00
Add to cart
Quick View
img
SAVE RM23.95

[190] HG REVIVE 1/144 Guncannon

  • Through the time 35 years, and sends to all Gundam fans! HG is `Shinsei -REVIVE-`

  • Respond to a number of requests, REVIVE START! HGUC cancer Cannon appeared in the latest format!

  • REVIVE1: characteristic proportions
    By with the curve of was released HGUC series first series the gun Cannon] Shinsei `-REVIVE-` sharp in May 1999, the expression characteristic and massive proportions.

  • REVIVE2: can be bold poses
    You can expand the range of movement, elbow, in addition to knee is in double joint, and forward bending of the waist, also, such as heel angle adjustment realized. Anime Geki-chu can be just like the poses.

  • REVIVE3: the ease of set and pursue
    Parts adopt the cut easy wedge gate from the runner. Further consolidate parts for each part, by a runner arranged more easily assembled design.

  • REVIVE4: also included parts enhance
    Other beam rifle of the main equipment, comes with the open hand to be able to fire posture at low attitude (upward) parts.
Accessories: 240mm low recoil Cannon × set, beam rifle, grip hand (left and right), upward smack (left and right)

RM48.00
Add to cart
Quick View
img
SAVE RM62.86

MG 1/100 RGM-79 GM Ver.2.0

RM147.00
Add to cart
Quick View
img
SAVE RM44.90

[196] HG REVIVE 1/144 Gouf

  • REVIVE 7th is [Mobile Suit Gundam] than `blue giant star` love machine Gouf the line-up of!
  • FUN TO BUILD
  • `Adopt a wedge gate`. Easily removed from the runner, since the gate mark is hard to rest, clean finish!
  • BEST PROPOTION
  • REVIVE the Gouf contemporary proportions! Can reproduce a wide variety of action poses a wide range of motion.
  • OPTION
  • The main armament of Gouf also abundantly included!
  • Heat rod can be bent freely, a variety of poses is to be able to!
  • Heat saber can be stored in the shield.
  • Accessories: shield, heat rod, heat saber (left and right), grip hand (left and right), Weapons Possession (left and right), 75mm machine gun smack

RM45.00
Add to cart
Quick View
img
SAVE RM23.90

[197] HG REVIVE 1/144 Gyan

  • Accessories: dedicated beam saber, dedicated shield

RM48.00
Add to cart
Quick View
img
SAVE RM20.00

P-Bandai Exclusive: MG 1/100 GM Cannon [North America Front Line Spec]

P-Bandai Exclusive: MG 1/100 GM Cannon [North America Front Line Spec]

  • Estimate Arrival : Early July 2017
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM280.00
Add to cart
Quick View
img
SAVE RM238.60

[Limited Production] PG 1/60 RX78-2 Gundam (Kunio Okawara Ver.)

P-Bandai Exclusive: PG 1/60 RX-78-2 Gundam Kunio Okawara Color Ver.

RM600.00
Add to cart
Quick View
img
SAVE RM39.90

P-Bandai Exclusive: HGUC 1/144 Crossbone Gundam X3

P-Bandai Exclusive: HGUC 1/144 Crossbone X3

RM160.00
Add to cart
Quick View
img
SAVE RM111.50

MG 1/100 RX-78-2 Gundam The Origin (Special Edition)

MG 1/100 RX-78-2 Gundam The Origin [Special Edition]


[ACCESSORIES]

  • LED unit [pink / yellow] 
  • Early type beam rifle x 1
  • Late type beam rifle x 1
  • Hyper bazooka x 1 
  • Beam saber x 2
  • Shoulder cannon x 1
  • Effect parts

RM223.90
Add to cart

Showing 1 - 30 of 148 products