• Home
  • Gundam Model Kits

Gundam Model Kits

Showing 1 - 30 of 128 products

Quick View
img
SAVE RM40.50

[104] HGUC 1/144 RGM-98S Stark Jegan

Gundam HGUC RGM-98S Stark Jegan Simple instruction included inside a package. Item Size/Weight : 362g

RM79.40
RM79.40 Add to cart
Quick View
img
SAVE RM128.90

MG 1/100 RX-0 Unicorn Gundam 02 Banshee

This black variant of the Gundam Unicorn first revealed in episode 4 of “Mobile Suit Gundam Unicorn,” features an all dark and yellow color scheme with a special translucent orange-yellow frame that shines under a black light meant to simulate the fiery glow of the “Psycho Frame”. This MG version features the OVA exclusive weapons, the Armored Arm VN and Armored Arm BS that mount on its arms and is fully transformable between Unicorn and Destroy Mode. Molded in colors meant to represent a black lion, complete with golden mane and requiring no glue for assembly, the Banshee is a must have Gundam design from “Gundam Unicorn”. Other accessories include 4 beam saber handles, 2 beam saber parts, pilot figure x2 (standing, sitting), Action Base 1 attachment, transformable V-fin x 1 , static V fin x 2 (Unicorn/Destroy).

RM200.00
RM200.00 Add to cart
Quick View
img
SAVE RM39.90

[134] HGUC 1/144 Unicorn Gundam 02 Banshee (Destroy Mode)

  • The second Unicorn Gundam "Banshee" from "Mobile Suit Gundam Unicorn" episode 4 joins the HGUC lineup. 
  • The new armaments seen in the episode 4 are included. 
  • The psycho frames can be seen through the armor.

RM68.00
RM68.00 Add to cart
Quick View
img
SAVE RM30.60

[140] HGUC 1/144 MSA-003 Nemo (Unicorn Ver.)

  • Lineup new in the popular gym system MS The HGUC-izing with first Nemo! - Reappearance of each form of elasticity is possible for a shield by a substitution part. 
  • In the waist back, mount of a beam saber is possible. a backpack -- within a play -- it is reappearance about specification. 
  • Modelling kits options, such as a hand part besides armaments of a rifle, a saber, etc., are attached. - MSA-003 NEMO (Nemo) -- Mass-produced type MS which エゥーゴ was using in "the role of a グリプス game." U. It will arrange o'clock on the Torrington base in C.0096. 
  • Accessories : gym rifle, shield, and beam saber x2, a fist (right and left), an open hand (right and left), saber handshaking (right and left), rifle grip (right) 
  • Item Size : 29.8 x 18.8 x 5.5 cm.
MSA 003 Nemo Unicorn (white) wikipedia
The MSA-003 Nemo is a mass-production attack-use mobile suit first featured in the anime series Mobile Suit Zeta Gundam. The design was later updated and featured in the light novel/OVA series Mobile Suit Gundam Unicorn.

The MSA-003 Nemo is a mobile suit developed by Anaheim Electronics that is based upon the the Earth Federation's RMS-179/RGM-79R GM II mobile suit. However, since Anaheim Electronics had no experience in the development of the GM series, risks were considered with parts procurement, maintenance, and the high costs that accompanied a completely new design. This was addressed by adopting design features and equipment from the RGM-79SP GM Sniper II, a machine considered a masterpiece that was fielded by Federation Forces and ace pilots late in the One Year War. Although this new suit strongly resembled the old GM II it was far better in terms of generator power, armor material, thruster acceleration, and maneuverability. Additionally the Nemo was able to use already existing weapons such as the RMS-099 Rick Dias’s beam saber or the GM II’s beam rifle, which also reduced the costs to produce these units.
The MSA-003 Nemo could be fitted with a ballute system, allowing the mobile suit to survive atmospheric entry on its own. Once its close enough to the ground the Nemo's thrusters are enough to slow descent, allowing it to land safely. Although not designed for aerial combat because of its lack of flight capabilities, the Nemo is still capable of firing its weapons at ground targets and aerial targets such as the FF-6 TIN Cod as long as the pilot pays attention to altitude. Despite not being designed for aerial combat the Nemo's durable armor and powerful weapons make it a deadly opponent for outdated fighter craft like the TIN Cod.

During the Gryps Conflict in UC 0087 the AEUG relied heavily on mobile suits stolen from the Earth Federation, mainly the RGM-79R GM II. However its leadership soon decided that the AEUG needed a mass-produced unit of their own so that they could compete the Titans's units and show to their enemy that they were a serious threat. The task to develop this new suit went to Anaheim Electronics, which then introduced the Nemo.
Shortly after its introduction the Nemo proved to be a capable and versatile mobile suit and the AEUG's leadership made it the organization's primary mobile suit, and would serve the AEUG for the entirety of the Gryps Conflict and the First Neo Zeon War. The Nemo is used in various important missions such as the attack to capture Earth Federation Salamis Kai-class cruiser, and the orbital drop to attack the Titans base at Jaburo. As an act of comradeship in their combined goal the AEUG gave a number of their Nemo mobile suits to Karaba for their use.

Even in the year UC 0096 the MSA-003 Nemo was still in service within the Earth Federation, as it had absorbed the AEUG and Karaba. Most units maintained their original paint scheme, but units stationed in deserts had been repainted so that the torso kept the original color scheme but the rest of the mobile suit is tan-like color. Almost a decade old the Nemo was no longer a front line unit, but would still see action fighting against remnants of Zeon during the Zeon attacks on Dakar and Torrington Base.

Descendents
The Nemo's design is eventually used to developed the MSA-004 Nemo II, which features, aside from a modified external appearance, improved thrusters, sensor range, and ultra-compact fusion reactor. The design of the Nemo II serves as a test-bed that is developed into the MSA-004K Nemo III, a unit armed with an additional shoulder beam cannon to allow it to take the role of a medium range support unit. Still, the Nemo III never passed the prototype stage and it wasn't mass-produced.
The design of Nemo also inspired another of Anaheim Electronics's mass production mobile suit, the MSA-007 Nero.

MSA003 Nemo's Weapons
  • 60mm Vulcan Gun - A standard armament of the mobile suits that are descended from the Earth Federation Forces's RX series. These head mounted shell firing weapons have a high-rate of fire, but have little power and are generally ineffective against mobile suits; however, the vulcan gun can damage lightly armored areas such as the sensors. These weapons are ideal for shooting down small, fast moving, lightly armored targets such as missiles or small vehicles.
  • Beam Saber - The standard close range armament for most Federation mobile suits. The beam saber is a small cylindrical device held in the mobile suit's hands when operated and is powered by an energy capacitor that is recharged from special racks. The beam saber emits a blade of plasma contained by an I-Field and is capable of cutting through almost any metal that has not been treated with anti-beam coating. The Nemo is equipped with two beam sabers stored in recharge racks on the rear waist armor.
  • 170mm Cannon - During the battle at Torrington Base in UC 0096, one Earth Federation Nemo was seen using a 170mm shell-firing cannon. While the weapon has a similar appearance to that of the NNFHI·GMCa-type.09/180mm Cannon used by the RX-79[G] Gundam Ground Type, there are some clear differences in the design of the two weapons which set them apart from one another.
  • Beam Rifle - The standard ranged armament of many mobile suits is the beam rifle. The particle beam fired from a beam rifle can penetrate almost any armor that has not been treated with specific counter-measures. To keep the cost of the Nemo down, the Nemo is equipped with the same beam rifle used on the RMS-179/RGM-79R GM II; which has a power rating of 1.9 MW and powered by a rechargeable energy cap.
  • Shield - A basic optional arm-mounted defense armament for many Federation mobile suits. The shield is a thick sheet of armor designed to take severe punishment that would normally destroy a mobile suit. Since the introduction of beam weaponry, shields have been treated with an anti-beam coating allowing it to withstand several beam shots before the coating wears off. Typically physical shields can only take so much damage before they succumb to the pressure and break. A shield can be equipped to either arm of the Nemo in order to increase defense against both beam and physical attacks.

RM59.30
RM59.30 Add to cart
Quick View
img
SAVE RM57.60

[147] HGUC 1/44 Byarlant Custom

  • Accessories: beam saber × 2, the propellant tank × 2, mount parts for action based - Item Size : 31 x 20 x 10 cm.
Wikipedia
After the Gryps Conflict of UC 0087, The Earth Federation reclaimed the data of the RX-160 Byarlant, being only non-transformable mobile suit with sustained atmospheric flight ability. However this never happened until in UC 0096, in where the mobile suit researchers redeveloped the said mobile suit into the RX-160S Byarlant Custom. The Byarlant Custom possesses enhanced speed, agility, and self-sustained atmospheric flight over the original and its capabilities were achieved through the incorporation of powerful thrusters in its shoulders, waist, and back with two large-capacity fuel tanks in its back to keep the thrusters fueled. It also has new feet design derived from the NRX-055 Baund Doc, the heels and toes can be fold into claws.
Being testbed mobile suit, it doesn't fix Byarlant's flaw at limited armaments. Instead, Byarlant Custom is refitted with parts from various Titans' mobile suit.

The Mono-eye sensor was replaced with EFF standard compound type sensors. Two Byarlant Custom units were produced at Torrington Base: Unit 01, fitted with leg units and claw manipulators derived from the RX-110 Gabthley, and Unit 02, which was scheduled to be equipped with a thruster unit developed from the ORX-005 Gaplant. Development staff have referred to the project as a composite "creature" (Chimera) of Titans mobile suits.

Weapons
  • Mega Particle Cannon - A fixed armament mounted on Byarlant Custom's forearms, it works as the only range weapons the mobile suit has, the power is rated at 4.7MW. It seems to have a higher rate of fire in place of beam thickness, but that in no way makes it any less dangerous.
  • Beam Saber - Unlike the original Byarlant, there are no beam sabers stored in the recharge racks of the arms. Instead the beam saber is made with the mega particle cannon emitter on each arm.
  • Claw Arm - Since its production, the Byarlant Custom were armed with two claw arms for close combat. These can be only used if the power supply of the mobile suit is low. The claw arms taken from the Gabthley seem stronger, but are even more unsuitable for wielding weapons.
The Assault of Torrington Base
The Byarlant Custom was first deployed against the Zeon remnants during the assault of Torrington Base. During its first deployment the Byarlant Custom destroyed multiple Zeon remnant mobile suits, including two AMS-129M Zee Zulu. The Byarlant Custom pushed back the Zeon remnant forces with the help of Londo Bell's Tri-Stars mobile suit team and other Earth Federation forces.

RM98.30
RM98.30 Add to cart
Quick View
img
SAVE RM156.20

MG 1/100 MSN-06S Sinanju Stein Ver.Ka

  • From UC: MSV, the first prototype of the iconic Sinanju- the rough-cut, white Sinanju Stein! 
  • The Sinanju Stein Ver.Ka- an almost pure-white Suit, the Sinanju Stein was designed using data from both the v Gundam and the Sazabi. This unparalleled combination of two of the most powerful Suits from the Universal Century has lead to a Suit with unique proportions and features designed to optimize performance. Of the 22 runners included with the Stein, 15 are completely new, and created for this kit. 
  • Includes marking decals created by Mr. Hajime Katoki, designer of this Suit. 
  • Gundam Unicorn-style Forearm mounted Beam Saber mounting system is included
  • Thruster unit mounted on backpack, can be locked using link arms to enable greater range of movement with the shoulder armor. 
  • Adopts the emotion manipulator for fully posable fingers, and weapons feature a double locking mechanism to hold them firmly in place from both sides.
  • Armed with Beam Rifle, bazooka, and more! 
  • Leg thruster units on the legs linked with connector arm.
  • Known as the return of the “Red Comet,” Full Frontal's MSN-06S crimson Sinanju started out as the Sinanju Stein- a white prototype that pushed the boundaries of human endurance! 
  • Accessories: Beam Rifle, Shield, Beam Saber x2, Bazooka,
  • Joint for Action Base 1, Figure (standing, seated)

RM263.70
RM263.70 Add to cart
Quick View
img
SAVE RM206.40

MG 1/100 RX-0 Unicorn Gundam 02 Banshee Titanium Finish Ver.

  • Black Unicorn Gundam Banshee, reincarnated as a Master Grade kit! 
  • Includes transformation mechanism into Unicorn mode! 
  • Appearing in the final scene of Mobile Suit Gundam: Unicorn episode 4, the Unicorn Banshee is fully reproduced here, including the full transformation system. 
  • Transformation from destroy mode to Unicorn mode is completely replicated. Moreover, the Psychoframe has been recreated in a UV sensitive material that illuminates under black light. 
  • Armed Armor VN features deployment gimmick.
  • Beam tonfa gimmick included. 
  • Armed Armor BS includes barrell details and deployment gimmick
  • RX-0 Unicorn Gundam 02: Banshee- revealed at the end of episode four, this mysterious Suit is capable of shifting into Destroy mode, and is massively powerful- but is it friend or foe?
  • Accessories : Armed Armor BS, Armed Armor VN, Beam Saber x4 (Beam Effect x2), Action Base Joint, Pilot Figure (Sitting, Standing), V Fin (Transformable), V Fin (Destroy Mode, Unicorn Mode)

RM453.60
RM453.60 Add to cart
Quick View
img
SAVE RM147.60

MG 1/100 RGZ-95C ReZEL Type-C (Defenser a+b Unit/General Revil)

  • MG 1/100 ReZEL TYPE-C (DEFENSER a+b UNIT/GENERAL REVIL CUSTOM) 
  • ReZel for General Revil from ""Mobile Suit Gundam UC episode 6"". 
  • The missile-equipped a-unit and the launcher-equipped b-unit are exchangeable. 
  • Its distinctive orange and grey colors are expressed in injection colors. 
  • runnerx26, foil sticker x1, dry decal x1, tetron sticker x1, instruction manual x1

RM241.30
RM241.30 Add to cart
Quick View
img
SAVE RM88.70

MG 1/100 RGM-96X Jesta

  • Master Grade kit of the Londo Bell Corps' high-performance MS: the Jesta! 
  • Deployed by the elite Londo Bell Corps, The Jesta is replicated here with gimmicks such as its moving shield arm. In addition, this kit incorporate proportions and features once thought to be unique to top-level kits, now made standard for the Master Grade series.
  • Movable shield arm can hold the shield against the backpack or in a usable position! 
  • Grenades mounted at the waist, and specialized Beam Rifle and Beam Saber are included 
  • Emotion manipulators adopted from the higher-level v Gundam Ver.Ka, along with the weapon-locking system!
  • With a limited operating time in Destroy Mode, the Unicorn Gundam relies on the elite RGM-96X Jesta to take out it's non-Newtype enemies! 
  • Accessories: Beam Rifle, Shield, Beam Saber, Pilot Figure (Standing, Sitting), Joint for Action Base 1

RM151.20
RM151.20 Add to cart
Quick View
img
SAVE RM166.30

MG 1/100 MSN-06S Sinanju

  • Accessories: Rifle only, dedicated shield, beam saber × 2, Beam Axe × 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  • The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
  • Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
  • The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
  • With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".

RM282.60
RM282.60 Add to cart
Quick View
img
SAVE RM60.80

[156] HGUC 1/144 RX-0 Full Armor Unicorn Gundam (Unicorn Mode)

  • Accessories: Hyper Bazooka x 3, beam saber x 4, x 2 anti-ship missiles, grenade Launcher x 2, hand grenade (6) x 4, Beam Gatling Gun x 6, shield (Unicorn mode) x 3, saber handle (right and left), flat hand (left and right), hand holding rifle (right), x 2 Posts for large booster, Beam Magnum

RM119.10
RM119.10 Add to cart
Quick View
img
SAVE RM26.60

[379] SDBB Delta Plus

  • It can be transformed into WR form from MS form by replacing the parts. 
  • The eye expressions can be chosen from two types. 
  • The base jabber type stand is included. 
  • Includes a clear stand to display Delta Plus alone. 
  • runner x8, foil sticker x1, instruction manual x1
Item Size/Weight : 31 x 20.2 x 5.7 cm / 262g

RM45.30
RM45.30 Add to cart
Quick View
img
SAVE RM50.60

[160] HGUC 1/144 Doven Wolf (Unicorn Ver.)

  • Mobile Suit Gundam Unicorn's recolored Doven Wolf joins the HGUC lineup! 
  • Updated from its appearance in Mobile Suit Gundam ZZ, MS Gundam UC Bande Dessinee's Doven Wolf features Sleeves' signature chest and 
  • forearm engraving. A more powerful-feeling kit than your average HG, this kit is loaded with gimmicks. 
  • Mega Launcher connects to the the body turret for firing mode, and can transform into Beam Rifle form.
  • INCOM units extend on wire leads, and feature dedicated stands! 
  • Commander-type's hidden arms can be exposed. 
  • Backpack can store large missile, and features deployment gimmick.
  • The Quasi-Psycommu MS developed for the First Neo Zeon War, the AMX-014 Doven Wolf is once again deployed by the Sleeves! 
  • Accessories: Mega Launcher, Hidden Arm x2, Anti-Ship Missile Large x2, Beam Saber x2,
  • INCOM Unit x2, INCOM Display Stand x2, Grip Manipulator (Left, Right), Open Palm (Left, Right), Rifle Manipulator

RM81.30
RM81.30 Add to cart
Quick View
img
SAVE RM45.90

[175] HGUC 1/144 Unicorn Gundam 02 Banshee Norn (Destroy Mode)

  • The RX-0[N] Unicorn Gundam 02 Banshee Norn (aka Banshee Norn) is an upgraded variant of the RX-0 Unicorn Gundam 02 Banshee that appears in the OVA version of Mobile Suit Gundam Unicorn. The unit is piloted by Riddhe Marcenas.
  • Accessories: Beam Magnum (with revolving launcher), beam Jytte, Armed Armor XC (expanded state), Armed armor DE (unfolded state), (※ no blade) × 4, rifle handle, grip hand × 2 (left and right) beam saber.

RM74.00
RM74.00 Add to cart
Quick View
img
SAVE RM30.60

[164] MSA-003 Nemo (Unicorn Desert Color Ver.)

The Nemo in desert colors as seen in episode 4 of "Gundam UC" comes with beam rifle, 2 beam sabers, shield, GM rifle and multiple hands for holding weapons and expressive gestures.

Accessories: 
- beam rifle
- beam saber × 2, shield
- Jim rifle

RM58.30
RM58.30 Add to cart
Quick View
img
SAVE RM67.40

[185] HGUC 1/144 Rozen Zulu (episode 7 Ver.)

RM100.50
RM100.50 Add to cart
Quick View
img
SAVE RM281.90

MG 1/100 Unicorn Gundam 03 Phenex

  • The RX-0 Unicorn Gundam 03 Phenex is a mobile suit that appeared in Mobile Suit Gundam UC: One of Seventy Two, a short animation feature at Gundam Front Tokyo's "DOME-G" on August 3, 2013. It is based off a short story written by Gundam Unicorn's author, Fukui Harutoshi. To celebrate this short animated feature, Bandai Hobby produced a limited Gundam Front Tokyo HG model kit of this design.

RM438.00
RM438.00 Add to cart
Quick View
img
SAVE RM48.70

[170] HGUC 1/144 Silver Bullet

  • Mobile Suit Gundam Unicorn’s Doven Wolf-inspired Silver Bullet joins the HGUC lineup! 
  • Appearing in Mobile Suit Gundam Unicorn Bande Dessinee, the Silver Bullet is adapted from the powerful Doven Wolf. A more powerful Suit than its predecessor, the Silver Bullet features a variety of gimmicks to add to the build experience of this kit. 
  • Faceplate can be changed out to feature either the GM-style or Gundam-style head! 
  • Backpack is equipped with Beam Cannon deployment gimmick 
  • Large missile can be mounted on the Suit.
  • Missile launcher hatch can be closed or opened.
  • Suit equipped with INCOM storage gimmick.
  • INCOM Wire effects and Stand included for dynamic action poses! 
  • Shield features telescoping gimmick.
  • Accessories: Rifle, Shield, Large Anti-Ship Missile x2, Beam Saber x2, INCOM x2,
  • INCOM Stand x2, Manipulator x5, Faceplate x2 (Gundam Style, GM Style)

RM83.20
RM83.20 Add to cart
Quick View
img
SAVE RM70.90

[178] HGUC 1/144 Full Armor Unicorn Gundam (Destroy Mode)

  • From Mobile Suit Gundam Unicorn comes the titular suit in its Full Armor configuration!
  • Armed Armor DEs can be mounted separately or in their tri-weapon formation using included display stands!
  • Psycho frame is molded in clear green part to create the Awakened Unicorn Gundam!
  • Beam Gatling Guns are included to complete the Armed Armor DEs!
  • Accessories: Hyper Bazooka x2, Beam Magnum, Beam Saber (Hilt) x4,
  • Beam Saber (Blade) x2, Anti-Ship Missile x2, Grenade Launcher x2,
  • Hand Grenade Rack x4, Beam Gatling Gun x6, Shield, Armed Armor DE x3, Large Booster x2, Grip Manipulator x2 (Left and Right)
Item Size/Weight : 31 x 20 x 13.3 cm / 665g

RM121.00
RM121.00 Add to cart
Quick View
img
SAVE RM47.90

[392] SDBB Neo Zeong

  • from "Mobile Suit Gundam UC episode 7", neo-nemesis Zeong the largest kit. 
  • overwhelming size of 190mm in height. Size of approximately 2-fold compared with the Full Armor Unicorn Gundam. 
  • addition pedestal parts-adjustable angle, the armed part of "Sinanju body", bazooka Add New armed is also included.

RM72.00
RM72.00 Add to cart
Quick View
img
SAVE RM582.02

PG 1/60 RX-0 [N] Unicorn Gundam 02 Banshee Norn

  • The head has transformation structure. The antennas on the head have magnet inside to hold them together in Unicorn Mode. 
  • In the state of "unchained", armor all over the body opens and maximally reveals the Psycho Frames. Psycho Frames are made with clear material. 
  • The lion's mane like Armed Armor XC is recreated with gold-color molding. The Psycho Frames are also made with clear material. 
  • The same range of movement as Unicorn Mode is maintained even in Destroy Mode. The kneeling pose can be recreated. 
  • The Revolving Launcher can be attached to the lower barrel of the Beam Magnum. The Beam Jutte, is recreated with clear parts. 
  • The Armed Armor DE and Beam Sabers are included. The Armed Armor DE has unfolding gimmicks and can be mounted on the back. 
  • The spare magazines of the Beam Magnum and Revolving Launcher can be attached to the hip. 
  • Weapons can also be displayed with included display base. The base has an elastic support post to enable the MS to make dynamic poses. 
  • Riddhe Marcenas figures (standing and seated) are included. 
  • Includes original marking stickers. 
  • Runner x58, Tetron sticker x1, Foil sticker x1, Instruction manual x1

RM737.10
RM737.10 Add to cart
Quick View
img
SAVE RM885.74

PG 1/60 RX-0 [N] Unicorn Gundam 02 Banshee Norn (With LED)

LED is included in this unit.

- [Kuroki lion] final battle form of Banshi~i - Banshi~i-Norns appeared !! to PG

- [Mobile Suit Gundam UC] than Banshi~i-Norns appeared become a Gundam highest grade PG. Fully reproduce the transformation from Unicorn mode to Destroy mode. Various equipment comes as the final decisive battle form.

- Armed Armor DE as a new accessory armed, comes with parts to reproduce the revolving launcher (. Existing beam Magnum, new parts added to shield both form reproducible).
- Psycho frame that is exposed to Destroy mode UV emission resin made of clear plastic reproduced in (clear yellow) specification.
- Anime by removing the Armed armor XC version Banshi~i also reproducible.

- Accessories: Beam Magnum (revolving launcher), shield (Armed armor DE), Armed armor XC, beam Jytte effect, beam saber × 2, beam Magnum spare magazine, pilot figures (Standing-sitting)

RM1152.90
RM1152.90 Add to cart
Quick View
img
SAVE RM187.98

P-BANDAI HGUC Gael Chan's Silver Bullet

  • From "Mobile Suit Gundam UC (Unicorn) episode 7", Gael Chan manipulate Silver Bullet appeared!
  • Reproduce the head with a feature in the new shape !!

RM141.80
RM141.80 Add to cart
Quick View
img
SAVE RM84.00

[022] RG 1/144 Sinanju

- Leaders of the [with sleeves], of crimson that Full Frontal to boarding MS` Sinanju `finally appeared at RG!

- RG POINT1: flexible thruster
Production enhancement of flexible thruster designed arranged by the actual historical research. Evolution to a more Gimikaru structure. Open and close while the medium mechanical exposed.

- RG POINT2: texture representation
Reproduce the whole body to arranged a gold patterned portions `engraved` in the plating and parts division. The underlying red molded color gloss injection specification. Beautiful glow of just Sinanju assemble enters the hand.

- RG POINT3: thrusters armor slide gimmick equipped
Thrusters of whole body equipped with a gimmick that the armor part to slide. Produce a mechanical sense of mechanical visible production.

- RG POINT4: high density detailing
Reflected in the whole body mechanical the Hajime Katoki dense detail design by draw down Mr..

- Reproduction of the armed
Equipment of Sinanju is included. Shield also adopted the engraving process. Back also detail reproduction.

- Accessories: beam rifle, beam saber, beam ax, shield, beam effect parts × 3 types, weapons possession (left and right), palm (left)

( This is a machine translation. Please allow for possible misinterpretations in the text. )

Item Size : 31 x 20 x 11 cm

RM143.60
RM143.60 Add to cart
Quick View
img
SAVE RM298.80

MG 1/100 Unicorn Gundam (Red / Green Frame Twin Frame Edition) Titanium Finish

  • [Mobile Suit Gundam Unicorn RE: 0096] complete commemorative items
  • Unicorn of titanium finish +2 kind of clear parts selection formula special specification Gundam!
  • It appeared in the luxury titanium finish specification !!
  • Psycho frame red or green selection formula !!
  • Backpack or foot portion is reproduced in blue plating specification.
  • Accessories: shield, beam Magnum, beam saber × 2, hyper bazooka

RM420.00
RM420.00 Add to cart
Quick View
img
SAVE RM31.90

P-Bandai Exclusive: HGUC 1/144 Gelgoog (Unicorn Ver.)

P-Bandai Exclusive: HGUC 1/144 Gelgoog (Unicorn Ver.)

  • This is a modelkit assemble needed
  • Prepainted Plastic, no paint require
  • Foil Sticker Included

RM118.10
RM118.10 Add to cart
Quick View
img
SAVE RM87.60

[025] RG 1/144 RX-0 Unicorn Gundam

RG 1/144 RX-0 Unicorn Gundam


- GUNPLA EVOLUTION PROJECT 2nd volume !!
- Unicorn Gundam is awake now, with a form pursuing reality and transformation gimmicks reproduced at 1/144!
- Unicorn Gundam is made into RG with a mechanism based on original setting consideration and real detail. [Transform] is realized for the first time on 1/144 scale by [Advanced MS Framework].

[EVOLUTION POINT `TRANSFORMATION (transformation)`]
- Create a product that will become Gundam's next-generation standard [GUNPLA EVOLUTION PROJECT]. EVOLUTION POINT in the second project [RG 1/144 Unicorn Gundam] is `TRANSFORMATION`. Realized transformation beyond the limit within the constraints of 1/144 scale.

[ADVANCED MS FRAMEWORK]
- A new framework developed to embody the Unicorn Gundam as RG. By "Advanced MS Framework" equipped with three gimmicks, [Advanced MS Joint], [Lock Mechanism], [Link Mechanism], we realize high stability after assembly and compatibility of movement of each part.

- 01: New frame pursuing a transformation mechanism [Advanced MS joint]
I thoroughly examined the transformation to the destroy mode, and created a new frame. It is the new design pursuing the transformation mechanism, [Advance MS joint] which is responsible for its center.

- 02: Precise locking mechanism to lock parts when transforming [lock mechanism]
Besides the armored part of the external forearm, locking mechanism for fixing parts after transformation is installed in various places. Realize high stability after transformation.

- 03: RG original proprietary [link mechanism] to reproduce a smooth transformation
The characteristic leg leg transformation of Unicorn Gundam is reproduced with a new [link mechanism]. This mechanism enables smooth transformation while alleviating the assembly process.

- Precise reproduction of weapon deployment. In addition to deployment of the psycho-frame of the shield, the cartridge detaching mechanism of beam · magnum is reproduced.

- Accessories: Beam · Magnum x 1, Beam · Saber x 2, Hyper · Bazooka x 1, Shield x 1

RM140.00
RM140.00 Add to cart
Quick View
img
SAVE RM31.00

P-Bandai: HGUC 1/144 Base Jabber Zeon Remnants Colors UC ver.

P-Bandai: HGUC 1/144 Base Jabber Zeon Remnants Colors UC ver.


[Reissue Item]

Premium-Bandai Webshop Exclusive. From Gundam Unicorn, comes the Base Jabber Zeon Remnants Color Ver. HG 1/144.

RM68.00
RM68.00 Add to cart
Quick View
img
SAVE RM89.60

[027] RG Unicorn Gundam 02 Banshee Norn

[027] RG Unicorn Gundam 02 Banshee Norn

Estimate delivery : March 2018

Accessories: 
Beam Magnum × 1, 
Revolving Launcher × 1, 
Armed Armor DE × 1, 
Armed Armor XC × 1, 
Beam Saber x 2

RM150.00
RM150.00 Add to cart
Quick View
img
SAVE RM114.50

MG 1/100 RX-0 Unicorn Gundam 02 Banshee Ver.Ka

Unicorn Gundam Ver. Ka again - Unit 2 Banshe finally rolled out with Ver.

- Change psycho frame to clear yellow.
- Changing colors according to the molding color, Ver.Ka unique marking water transfer decal included.
- Besides Beam · Magnum and Shield, weapons parts such as Hyper · Bazooka are enriched.

[accessories]
- Beam . Magnum x 1
- Shield x 1
- Hyper . bazooka x 1
- Beam saber x 2

[Product content]
- Molded article x 22
- Foil seal x 1
- Water transfer type decal x 1
- Instruction manual x 1

RM185.00
RM185.00 Add to cart

Showing 1 - 30 of 128 products