Price Clear







Gundam Model Kits

Showing 1 - 30 of 40 products

img
SAVE RM574.90

PG 1/60 Gundam 00 Raiser

The Initial Release Limited Edition has fully sold out. Please note that the Initial Release Previlage items will not be included for this product. Thank you. Since the last Perfect Grade 5 years agoe, here is a completely new Perfect Grade 'Double O-Rizer'!! The first from the Double O series to have its inner frames completely reproduced! Equipped with a clutch mechanism to maintenance the joints, makes you image the GN Condenser. The GN Drive from the anime reproduced, it spins and lights up. Of course, the head lights up too. So many numbers of equipments like never before. Such detail forces you to image a fighting machine. Contents: GN Sword II x1, GN Sword III x1, GN Beam Saber x1, GN Shield x1, GN Missile A/S x1, GN Condenser x1, Particle Disruping Missile x1, Hand Missile Unit x1. Weight:4.2kg

RM925.00
RM925.00 Add to cart
img
SAVE RM329.40

PG 1/60 XXXG-00W0 WING GUNDAM ZERO CUSTOM

  • From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  • With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  • Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  • Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  • Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  • Center chest and “eye” cameras light up using included LEDs (batteries required)
  • Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 

  • Accessories: Accessories: Twin Buster Rifle, Beam Saber x2

RM570.00
RM570.00 Add to cart
img
SAVE RM329.90

PG 1/60 RX-178 Gundam MK-II (A.E.U.G)

  • An extremely detailed and highly engineered model kit of the Gundam Mk 2 from "Mobile Sut Zeta Gundam!" 
  • Furnished with an internal skeleton featuring pistons, sensor arrays, as well as LED powered e07/1/2014 (CR1220 battery sold separately), the Mk 2 embodies the mechanical complexity and attention to detail embodied in the Perfect Grade line. 
  • Standards for the Perfect Grade line include fingers that have individual articulation, while actuators move in sync with arm and leg joints. 
  • Mk 2 features many opening hatches and swiveling components as if it were a real machine undergoing maintenance. 
  • Beam rifle, beam saber, bazooka, head Vulcan, shield are included. Runner x 30, Foil sticker x1, Marking seal x1, Decal x1, Led unit, Instruction manual.

RM570.00
RM570.00 Add to cart
img
SAVE RM410.80

PG 1/60 Gundam Astray Red Frame

The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

RM669.10
RM669.10 Add to cart
img
SAVE RM850.90

PG 1/60 Wing Gundam Zero Custom (Pearl Mirror Coating Version)

1/60 scale Perfect Grade Gundam. This kit is just like the original but with special metallic pearl coating. The regular version is our best selling Gundam kit (dollar sales) ever! Fans will want this special collectors version.

* Special Pearl Mirror Version - Perfect Grade - 1/60 Scale
* Wing Gundam Zero Custom from New Mobile Report Gundam Wing: Endless Waltz
* Outer frame coated with pearl metallic paint. The wing parts are made half clear coated with pink pearl, glittering in rainbow colors. Antenna and other parts in yellow are finished in gold paint.
* Red parts ae finished in red pearl metallic. Handle on package for carrying.
* Instructions are in Japanese but booklet has very detailed pictures for examples to building. Japanese language is not necessary to build

Package size: 12.5cm x 59.5cm x 35cm

RM899.00
RM899.00 Add to cart
img
SAVE RM351.80

PG 1/60 RX-178 Gundam Mk-II Titans Color

-Except for the color of the parts, this kit is identical to Perfect Grade Gundam Mk-II kit. -That means you get thousands of parts coming together to create one of the most detailed renderings of a robot that's ever been done in plastic -- and the beauty's not only skin deep: under those armor panels are actuators and lots of inner detail.

RM548.10
RM548.10 Add to cart
img
SAVE RM210.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM450.00
RM450.00 Add to cart
img
SAVE RM259.90

PG 1/60 RX-78-2 Gundam

This item is a posable, Perfect-Grade injection-plastic kit of an item from the Gundam universe. 626 parts. 31cm high when completed. 
Things don't get much better than this for Gundam fans.

The kit that Bandai has produced is truly amazing. The most striking aspect is the incredible level of INNER detail. It's almost a shame to put any of the cover panels on this thing, because there is so much on the inside that a little silver and black paint will make very interesting to look at. Bandai is aware of this, and is also going to market an optional parts set for the kit that includes transparent body pieces! This is due in December, we're told. That set will also include a light-up beam saber.

What can you say about this kit? Though some weapons are not included (no doubt for a later release), it's just about everything you could hope for in terms of detail and poseability. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this. Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece will be completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM460.00
RM460.00 Add to cart
img
SAVE RM664.90

PG 1/60 ZGMF-X20A Strike Freedom Gundam

- The ultimate "Strike Freedom Gundam" has been refined by Kakito Hajime!! - The greatest sense of size amongst the PG. With it -  ï¿½ï¿½s greatest feature, the Super Dragoon in its fully expanded state, it becomes the largest size class in the history of Perfect Grade. - Custom Display Stand for displaying Strike Freedom Gundam is included. The use of custom stand with the ability to adjust angles enables you to display the model in a dynamic action pose. - The 3 Points for reproducing the Ultimate "Strike Freedom Gundam"!! The frame structure exposed during the High-Matt Mode/Full-Burst Mode has been processed with Extra Finish, emitting golden shine, drawing out the attractiveness even more. - [Super Dragoon Extending Mode Gimmick] By sliding the Super Dragoon, each part linked to it will be expanded to the firing mode. - [Mobile Interior Frame Structure Fully Newly Produced] The golden parts are drawn out by sliding the joints. The exterior with a sliding gimmick installed, in conjunction with the interior framing that has evolved from the PG Strike Gundam, along with the golden parts with Extra Finish processing, effectively showsthe gold parts. - [New Mechanism used in the Joints] The parts that supports the weight such as hip and legs etc. has been armed with new mechanism. By the extra support of the joint, you will be able to enjoy making the poses that comes to mind. - Accessories: Beam Shield, Beam Rifle x2, Beam Saber x2, Xiphias 3 Rail Cannon x2, Super Dragoon x8, Custom Display Base *Requires 2x LR41 batteries for LED sold separately. Strike Freedom Gundam


Strike Freedom Gundam - Full Blast Mode


Strike Freedom Gundam - Perfect Grade


Stand for Strike Freedom Gundam 1/60

RM925.00
RM925.00 Add to cart
img
SAVE RM345.80

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM755.10
RM755.10 Add to cart
img
SAVE RM471.20

PG 1/60 RX-0 Unicorn Gundam (Without LED)


  • The transformation from "Unicorn Mode" to "Destroy Mode" including the opening of the face guard can be perfectly recreated. 
  • The entire red Psycho Frame is made with a unique light-focusing resin. 
  • A magnet is inserted in the Blade Antenna, which can be opened and closed during the transformation, in order to keep the antenna beautifully in Unicorn Mode. The interior of the antenna, which is exposed in Destroy Mode, is gold. 
  • The range of movement of the elbows and knees is broadened to the utmost limit, without damaging its appearance. 
  • Includes a lot of weapons such as a Beam Magnum, a Hyper Bazooka and Beam Gatling Guns. 
  • The Beam Gatling Guns can be combined with the Shield and worn on its leg. 
  • A display stand is included to allow a wide range of weaponry to be displayed together with the Mobile Suit. Set the MS on the pillar of the stand and enjoy its dynamic poses which are special and unique to 1/60 scale. 
  • Figures of Banagher Links, standing and sitting, are included. 
  • Original marking stickers for the kit are included. 
  • Psycho Frame emits UV lights by incorporating the LED Unit for PG 1/60 RX-0 Unicorn Gundam, sold separately. 
  • Runner 47, Slide mark x1, Foil sticker x1, Instruction manual x1 

RM728.00
RM728.00 Add to cart
img
SAVE RM855.20

PG 1/60 RX-0 Unicorn Gundam (With LED)

  • Latest news : Shipment has arrived.
  • This is completed set of PG Unicorn Gundam + LED Set at super saver price!
  • PG Unicorn Set:
  • Fully transformable (Face guard "expansion" included)
  • "Third form" realized
  • Red psychoframe in special glow plastic
  • "Transformation" uses magnet in antenna; Interior of the antenna is gold color
  • Articulation of the elbow and knee joints able to perform a wide range of movements
  • Psycho frame UV emission by incorporating a dedicated LED unit (sold separately)
  • Accessories: Shield, beam magnum, beam Magnum for spare magazine, beam Gatling gun × 2, saber × 4 (beam parts × 2), hyper-Basuka, dedicated display base, 
  • LED Unit:
  • A set of LED units to be UV emitting [PG 1/60 RX-0 Unicorn Gundam]
  • For use with Psychoframe with 29 LED units, and one for the eyes, making the total 30 LED units
  • Height Approx: 361mm
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM1180.00
RM1180.00 Add to cart
img
SAVE RM398.00

[Limited Production] PG 1/60 RX-78/C.A Casval Gundam

[Limit Production] PG 1/60 RX-78/C.A. Neo Zeon Casval's Gundam EXF Ver.


RM800.00
RM800.00 Add to cart
img
SAVE RM271.60

[Limited Production] PG 1/60 RX78-2 Gundam (Kunio Okawara Ver.)

P-Bandai Exclusive: PG 1/60 RX-78-2 Gundam Kunio Okawara Color Ver.

RM567.00
RM567.00 Add to cart
img
SAVE RM399.00

[Limited Production] PG 1/60 RX-78-2 Gundam (Chrome Plated Ver.)

Limited Production : 1/60 (PG) RX-78-2 GUNDAM CHROME PLATE VER


To all GUNDAM FANS! 

This is Bandai's Perfect Grade 1/60 PG RX-78-2 GUNDAM (CHROME PLATED VERSION!) gunpla model kit. 

The truly amazing limited production for certain countries in Asia. One of the best designed inner frame detail even until today. Everything you ever hope for detail and possibility for this model are achieved! Several little actuators, hydraulic pistons are inclusive in the inner frame as well. 

Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For all true Gundam hobbyist, there's simply no question about whether you should order this. 

This is a LIMITED PRODUCTION kit! Don't miss this!

RM799.00
RM799.00 Add to cart
img
SAVE RM497.70

PG 1/60 Gundam Astray Red Frame Kai

P-Bandai: PG 1/60 Gundam Astray Red Frame Kai

Great news guys!!! The item that sold under P-Bandai in Non-Asia Countries is now released as the regular Bandai product in Asia Countries!!! Make sure you don't miss out this great opportunity to get this big guy home!!!


Accessories:
  • Gerbera Straight x 1
  • Tiger Pierce x 1
  • Tactical Arms II L


RM880.00
RM880.00 Add to cart
img
SAVE RM517.70

PG 1/60 00 Gundam Seven Sword

- It flees to the battlefield with Setsuna, F · Seiyi who was awakened by the innovator as an aircraft equipped with seven swords and guns. In addition to arming, new modeling parts are also added to the main body. Aircraft that played an active part in [Mobile Suit Gundam 00V Senki] are kitized with PG!

[Sophisticated proportions, redesigned coloring and texture representation]
- Adjust the proportions of each part such as legs, head, shoulder and so on. By new modeling parts, make it more refined impression.
- Adopt molding material that emphasizes texture. Under the supervision of Ebi Ekawa Kanitake, the molding color is completely renewed.

[Armored parts cover variable light gimmicks]
- GN Bustor Sword II reproduces light emitting gimmick by LED.
Newly developing trend-oriented parts of the new organization by understanding the setting shape and conducting detailed guiding analysis / design (patent pending)
- Large Armed GN Sword II Blaster is reproduced in a large size of about 340 mm in total length.
- GN Qatar can reproduce various variations such as mounting on the leg part alone, connected state and so on.
- GN sword II long / short form can be reproduced by replacement, long is grip development in rifle state, short can be reproduced with lead wire using injection type.

- accessories
* GN Buster Sword II x 1
* GN Sword II Short x 1
* GN Sword II Long x 1
* GN Qatar x 2
* GN beam sabel x 2
* GN Sword II Blaster x 1
* Action base x 1

- Product content
Molding product x 44
* Foil seal x 1
* Marking stick x 1
* Dry decal x 1
* 2 GN drives
* LED unit x 2
* Hexagon bolt x 2
* Screw (long) x 4 (short) x 2
Hexagon nut (large) x 2 (small) x 6
* Coil spring x 8
* Rubber seal x 2
* 2 PE sheets x 1 each
* Bis x 1
* Lead wire x 1
* Instruction manual x 1

RM860.00
RM860.00 Add to cart
img
SAVE RM572.50

PG 1/60 Perfect Strike Gundam

Release Date: Feb 2020
Estimate Delivery : March 2020

If you already have the PG Strike Gundam, you can purchase the Premium Bandai Perfect Striker pack expansion pack separately!

The full kit will also include updated armor parts for the original PG Strike Gundam.

[ACCESSORIES]
Yellow LED
Strike Gundam new armor parts
Aile Strike pack (Perfect Strike Ver.)
Sword Striker pack
Launcher Striker pack
New pointers
New molded parts are added to the kit, that includes the newly designed armor parts for its body and head.
Gunmetal inner framing colors! Chrome parts are also provided for the plated parts.
Extra finish parts are also introduced in various pieces of the new armor, resulting in a more sophisticated design.

RM925.00
RM925.00 Add to cart
img
SAVE RM252.90

PG 1/60 GAT-X105 Strike Gundam

The impressive (and beautifully-designed) Strike Gundam, from Gundam Seed, is the next machine to have received the Perfect Grade treatment! It features superior flexibility -- Bandai's designed an all-new, unique inner frame system for this model, to match the proportions of the mecha designs in the series. 

The waist joints even allow it to bend side to side, and twist realistically! The "camera eyes" light up with internal wiring and a single LED. 

Not surprisingly, a lot of parts are required to create the exquisite detail we've come to associate with the Perfect Grade series -- over 550 ABS plastic parts, all molded in colour, plus polycaps for the joints, die-cast joint parts for stability, and of course the LED and wiring for the head (requires one CR1220 watch-type battery, sold separately). 

Parts are included for a Beam Rifle, shield, Armor-Schneider blades, and of course the positively enormous Grand Slam sword -- this last beautifully plated in silver! 

A challenging project for fans of Gundam, of Gundam SEED in particular, or just Perfect Grade kits!

Technical and Historical Notes/Story line: 

With the outbreak of war, the Earth Alliance's Atlantic Federation begins a secret project to develop mobile suits to counter ZAFT's mass-produced ZGMF-1017 GINN as well as operate free of interference from the N-Jammers. 

The GAT-X105 Strike Gundam is one of five initial prototype suits secretly developed in conjunction with Orb's Morgenroete defense company. Whereas the other Gundams are designed for specific roles, the Strike Gundam is intended to operate in various configurations through the use of Striker packs. Like the other prototype Gundams, the Strike Gundam is equipped with the new Phase Shift (PS) armor technology. 

When in Phase Shift mode, the Strike Gundam is nearly impervious to attacks from shell-firing artillery or melee weapons. However, use of Phase Shift for extended periods of time is a massive drain on the energy battery. 

The basic version of the Strike Gundam is nearly identical to the GAT-X102 Duel Gundam's initial configuration. Its armament consists of two "Igelstellung" vulcan guns, a 57mm beam rifle, a shield and two "Armor Schneider" combat k-nives. Other optional armaments include a bazooka designed for underwater combat. 

In addition to the first unit, Orb later constructs an improved version from spare parts, the MBF-02 Strike Rouge. The Alliance also constructs a third unit, which is later upgraded into the GAT-X105E Strike E. 

The Strike Gundam is later followed by the mass production GAT-01 Strike Dagger and GAT-01A1 Dagger. The first Strike Gundam enters combat in January 25, C.E. 71, when ZAFT attacks Orb's space colony Heliopolis in an attempt to steal the Gundam prototypes. 

Although ZAFT succeeds in capturing four units, the Strike Gundam remains in Alliance control and is initially (and ineffectively) used by Murrue Ramius. However, young Coordinator Kira Yamato is able to modify the incomplete operating system and make the Strike Gundam combat ready. 

Following the destruction of Heliopolis, Kira becomes the Strike Gundam's default pilot and joins the crew of the Archangel. While heading for the Alliance's Alaskan headquarters, the Strike Gundam is severely damaged in battle on April 17 by Athrun Zala's self-destructing GAT-X303 Aegis Gundam. 

The Strike Gundam is later repaired by Orb and passed on to ace pilot Mu La Flaga, while Kira upgrades to ZAFT's ZGMF-X10A Freedom Gundam. The Strike Gundam serves as Mu's personal mobile suit after the Archangel defects from the Alliance and joins the Orb forces and Clyne faction to form the Three Ships Alliance. 

At the war's end on September 27, the Strike Gundam is damaged in a duel with Rau Le Creuset's ZGMF-X13A Providence Gundam and later destroyed while Mu is protecting the Archangel from an attack by the Alliance battleship Dominion. 

Two years after the war, the versatile design of the Strike Gundam serves as the basis for ZAFT's ZGMF-X56S Impulse Gundam.

RM518.00
img
SAVE RM111.80

PG 1/60 FX-550 Sky Grasper + Aile Striker

The perfect addition to your Perfect Grade Strike Gundam! The PG Skygrasper also comes with the Aile Striker; you can build and display them both on the included display base, or integrate them into PG Strike Gundam. All the parts are molded in colour and snap together for easy assembly; polycaps are included for joints, and Gundam Stickers are included for markings. Note: This is the only additional set designed to fit the PG Strike Gundam. 

Weight : 1046g

RM188.10
img
SAVE RM858.64

PG 1/60 RX-0 [N] Unicorn Gundam 02 Banshee Norn (With LED)

LED is included in this unit.

- [Kuroki lion] final battle form of Banshi~i - Banshi~i-Norns appeared !! to PG


- [Mobile Suit Gundam UC] than Banshi~i-Norns appeared become a Gundam highest grade PG. Fully reproduce the transformation from Unicorn mode to Destroy mode. Various equipment comes as the final decisive battle form.

- Armed Armor DE as a new accessory armed, comes with parts to reproduce the revolving launcher (. Existing beam Magnum, new parts added to shield both form reproducible).
- Psycho frame that is exposed to Destroy mode UV emission resin made of clear plastic reproduced in (clear yellow) specification.
- Anime by removing the Armed armor XC version Banshi~i also reproducible.

- Accessories: Beam Magnum (revolving launcher), shield (Armed armor DE), Armed armor XC, beam Jytte effect, beam saber × 2, beam Magnum spare magazine, pilot figures (Standing-sitting)

RM1180.00
RM1180.00 Request Stock
img
SAVE RM570.00

P-Bandai Exclusive: PG 1/60 Gundam 00 Raiser (Trans-am Mode)

P-Bandai Exclusive: PG 1/60 Gundam 00 Raiser [Trans-Am] - 2nd Reissue
  • Estimate delivery March 2019
[ACCESSORIES]
  • GN Micro Missile x 8
  • GN Beam Saber x 2
  • GN Vulcan
  • GN Shield x 1 [2 parts]
  • GN Sword II x 2
  • GN Sword III x 1
  • Particle Disruption Missile x 2
  • Hand Missile Unit x 2

RM1780.00
RM1780.00 Request Stock
img
SAVE RM116.50

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Parts Set Conversion

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Part Conversion

Estimate arrival Late August 2017

Trans-am clear parts for PG 1/60 00 Raiser Trans-AM ver. , which is sold separately.
Clear orange, are provided for the antennas. Molds separated with clear pink, clear green, and clear red.
GN drive exterior parts of both shoulders are not included.  Armored exterior parts such as GN Sword â…¡, GN Sword â…¢, GN Shield, etc. are reproduced with clear parts.
PG 1/60 Special Stand sold with PG 1/60 00 Raiser Trans-AM ver. 
This kit is getting released to celebrate the 10th anniversary of Mobile Suit Gundam 00 anime series.

RM283.50
img
SAVE RM418.20

PG Gundam Exia (Without LED)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.


- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. It embodies the design arrangement and the internal frame structure led from it.

- Feel energy transmission 'Armor · Frame structure'
Considering the transmission structure of [GN particle], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, aerial action full of dynamism is possible.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.
- The regular version adopts a metallic seal and expresses the light emitting part by reflection of light.

- Accessories: GN sword x 1, GN shield x 1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x 1

RM660.00
img
SAVE RM980.00

P-Bandai: PG 1/60 Unicorn Gundam 03 Phenex [Gold Plated] [Without LED] [REISSUE]

P-Bandai: PG 1/60 Unicorn Gundam 03 Phenex [Gold Plated] [REISSUE]


*LED is sold separately
*Gold Plated

RM2220.00
RM2220.00 Request Stock
img
SAVE RM428.20

P-Bandai PG 1/60 Gundam Astray Blue Frame

P-Bandai PG 1/60 Gundam Astray Blue Frame (2nd Issue)


From MOBILE SUIT GUNDAM SEED ASTRAY,

"The Best Mercenary" GUNDAM ASTRAY BLUE FRAME is joining the Perfect Grade!

Perfect Grade perfecting the true meaning of BLUE FRAME------------------

Excellent shape & color replication. Brand new weapons, figures, and markings included.

-------------------------------------------------------------------

* 'M68 "Cattus" 500mm Recoilless Gun' included

The huge weapon 'M68 Cattus 500mm Recoilless Rifle is included with brand new design.

Trigger adjustment, extendable barrel, and detachable missile rack, various gimmicks set to increase the play value.

Size(total length)・・・in stored state: about 265mm/in deployed state: about 280mm

* Original Marking included.
Brand new marks such as caution marks are included, along with Gai Murakumo's personal mark.

* Figure included
2 types of new Gai Murakumo figures in the same scale are included (standing ver./sitting in cockpit ver.)

* Perfect Grade's extremely wide movability.

PG GUNDAM ASTRAYs possess the 'Movable Inner Skeleton" to achieve the flexible and dynamic movability.
By linking the armor to the frames and multiple joints, it's possible to create poses similar to human bodies.

The knee parts and knee joints are die casted to improve durability when posed.

* Camera Eye Light
The Camera Eyes (eyes) on the head are built with light unit inside, and can be lit with batteries (sold separately)

*Required Battery: CR1220 (sold separately) x1 
Weapons: M68 "Cattus" 500mm Recoilless Gun, Beam Rifle, Beam Saber, Shield

RM950.00
img
SAVE RM200.00

[NillSon] 1/60 Astray Red Frame Gundam Flight Unit - with Backpack (Deactivate Mode) [Gray]

* This is a NON Bandai product.

Package include :
* 4 blade swords 
* Special PG Action base
* Deactivate Frame Colour

Around 30cm height 
Package size : 50cm x 40cm x 30cm (19.69in x 15.75in x 11.81in)

RM400.00
img
SAVE RM300.00

[MECHANICORE] 1/72 MAS-20 PYRANNOSAURUS



    *** PRODUCT SPECIFICATION***

  • 1. Head Height : 260MM
  • 2. Height : 285MM
  • 3. Depth : 151MM
  • 4. Mega Cannon Length : 324MM
  • 5. Mega Shield : 240 x 130MM
  • 6. Plastic parts : Approx~ 1650 pcs
  • 7. Maintenance valve : 55
  • 9. Valve metal hinges : 19
  • 10. LED = 28
  • 11. Power Control Unit
  • 12. Specified Platform and Stand Bundled
  • 13. Premium Exclusive : Heavy Laser Rifle bundled

RM1480.00
RM1480.00 Request Stock
img
SAVE RM70.00

Gao Gao PG 1/60 OO Raiser Gundam

Gao Gao PG 1/60 OO Raiser Gundam

RM350.00
img
SAVE RM70.00

Daban PG 1/60 Exia Avalanche / Repair with LED

Daban 1/60 Exia Avalanche/Repair
Upcoming release

Estimate Delivery : Oct/Nov 2019 

Limited edition including 
PG Exia model kit
PG Exia use LED
PG Avalanche parts
PG Repair parts

Limited stock release

RM550.00

Showing 1 - 30 of 40 products