Price Clear







Star wars Model Kits

Showing 1 - 30 of 34 products

img
SAVE RM51.80

[Star Wars] 1/72 First Order Tie Fighter

[Star Wars] 1/72 First Order Tie Fighter
Kit includes two canopies, two seated figures, 1 standing figure, base, laser blasts and decals

RM92.00
img
SAVE RM62.30

[Star Wars] 1/72 Resistence X-Wing Fighter

  • X-Wing Fighter Resistance specification 1/72 scale that appeared during the "awakening of Star Wars / Force" drama.
  • Possible desorption of BB-8 to support adjustment and pilot of the aircraft.
  • Airframe side of the line is to reproduce the color-coded in the molding color, other fine line using the water transfer type decals and marking seal.
  • Canopy and those of the all-clear material, two is supplied only frame.
  • to reproduce the detail over the details by verifying the thorough article condensation in the 1/72 scale.
  • Distinctive wings reproduce the opening and closing of the same in the play.
  • Chakuyukaashi comes the landing gear to reproduce the implantation and maintenance state.
  • Laser cannon can reproduce the figure decided to attack by inserting the laser effect to the wing tip.
  • Display base desert motif of Jakhu of aircraft. Based multiple connection possible with the joint parts.
  • The same scale of the pilot (seated type upright type) and BB-8 is included.
  • [Accessories] dedicated display case x 1, pilot figures x 2 (seated x 1, upright x 1), BB-8 x 1, x 2 canopy species (Clear parts x 1, frame parts x 1), effect parts x 2 , Chakuyukaashi x set
  • [Commodity content] moldings x 4, water transfer type decal x 1, marking seal x 1, assembly instructions x 1

RM93.60
img
SAVE RM62.30

[Star Wars] 1/72 X-Wing Starfighter

  • This item is an injection-plastic kit of a science-fiction/anime item.
  • From "Star Wars Episode IV", Bandai presents us with an exquisitely detailed kit of the X-wing Starfighter in 1/72 scale! This kit includes parts for two pilots (one standing and one sitting) and posable versions of R2-D2 and R5-D4! Other accessories include proton torpedoes and a clear and clouded part for the canopy window. And last but not least, this set includes a Death Star Surface display base, as well as a Death Star Exhaust Port display piece so you can recreate the final, epic battle scene from the movie!Release Date: Nov 2014
  • The kit in 72 scale X-wing starfighter Luke Skywalker was boarding in [episode 4].
  • Accessories: landing gear to reproduce the landing and maintenance state is included.
  • Astromech droid of the body 2 of the R2-D2, R5-D4 and (seated type upright type) pilot of the same scale comes with legs moving in an upright-walking time for both Droid.
  • Set include: Death Star exhaust heat ports base × 1, Death Star surface base × 1, Proton torpedo effect × 2, Pilot figure × 2 (seated upright × 1 · × 1), R2-D2 × 1,  R5-D4 × 1, Landing leg × 1 expression, (Clear parts × 1 · frame parts × 1) 2 × canopy species.
  • Full length: approx 173mm.
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM93.60
img
SAVE RM50.30

[Star Wars] 1/72 TIE Advanced x1

This item is an injection-plastic kit of a science-fiction/anime item.  

Here is Darth Vader's TIE Fighter, now in snap-fit Bandai quality plamo goodness!  This amazing kit includes two Darth Vader figures--a seated one to pilot the vehicle, and a standing one for display alongside it.  Two types of removable display windows are included for the cockpit, and a Death Star panel display base will show this wicked machine off in style!  Laser effects are also included. Don't miss out on this iconic fighter!  

Release Date: Nov 2014

To detail reproduced in 1:72 scale Thai Advanced x1 Darth Vader was boarding in [episode 4].

Set include : Death Star surface base × 1, Laser effects × 2, Darth Vader figure × 2 (seated upright × 1 · × 1), (Clear parts × 1 · frame parts × 1) 2 kinds of view boat ×

Full length: approx 85mm.

This is pre-painted plastic model kits and require snap-fit assembly only..

RM93.60
img
SAVE RM48.90

[Star Wars] 1/48 AT-ST

This item is an injection-plastic kit of a science-fiction/anime item.  

The AT-ST -- or the All Terrain Scout Transport -- is joining Bandai's lineup of exciting Star Wars kits! Add a little more mechanical flair to your Star Wars collection with the Empire's "chicken walker." You might want to keep this one away from the Ewoks.

This snapfit kit consists of parts molded in grey and brown plastic, and includes a Wookiee figurine, pilot figurine, red effects parts, and display terrain base. Also included are markings as both stickers and water-slide decals.

RM95.00
img
SAVE RM71.90

[Star Wars] 1/72 Tie Fighter

This item is an injection-plastic kit of a science-fiction/anime item.  

Able to operate both in space and in planetary atmosphere, the TIE fighter was the Empire's most easily recognizable spacecraft. This snapfit kit consists of parts molded in grey, black, and clear plastic, and includes two pilot figurines, green effects parts, and a flexible display base. Also included are markings as both stickers and water-slide decals. 

RM72.00
img
SAVE RM71.90

[Star Wars] 1/48 Snowspeeder

  • At the Star Wars [Strikes Back Episode 5 / empire], three-dimensional in 1/48 scale Snowspeeder hero Luke Skywalker was boarding!
  • Condensed the details of detail in the 1/48 scale from the verification of thorough Prop (imaging model).
  • The replacement of parts, to reproduce the opening and closing state of air brake.
  • Snow Speeder can be reproduced to fire a laser gun with a laser effect.
  • Seating type figure of the same scale is two bodies included. Snowfield in the AT-AT a defeated power Harpoon (harpoon) parts of the host is also included.
  • Supplied base image the snowy field host. Based multiple connection is possible with the joint parts.

Accessories: Dedicated display base, laser effect parts x 2,1 / 48 figure x 2 species (pilot, gunner), canopy x 2 species (frame & clear parts, clear parts), Power Harpoon (harpoon) parts, air brake opening and closing reproduction parts four x 2

RM72.00
img
SAVE RM108.86

[Star Wars] 1/72 Y-Wing Starfighter

[Star Wars] 1/72 Y-Wing Starfighter

  • Accessories: Death Star surface-based, laser effect parts, the same scale pilot figure x 3 (upright x 1, seated x 2 types), the same scale astromech droid x 2 species, canopy x 2 species (frame parts, clear parts ), Chakuyukaashi

RM95.00
img
SAVE RM119.85

[Star Wars] 1/144 Slave I

[Star Wars] 1/144 Slave I

  • Accessories: (road part of the selection formula) dedicated display-based, laser effect parts × 2, Boba Fett figure × 2 (upright-seated), carbonite frozen Han Solo figure, hangar hatch opening and closing reproduction parts two × 2, apron / flight state reproduction for both wings cylinder parts two × 2

RM108.00
img
SAVE RM195.61

[Star Wars] 1/48 X-Wing Starfighter (Moving Edition)

  • This product is only sold in Japan currently.
  • Not many units available ~ hurry while stock lasts.
  • 3xAA battery required and sold separately.
  • [STAR WARS] 1/48 X-WING STARFIGHTER MOVING EDITION

RM392.00
img
SAVE RM124.78

[STAR WARS] 1/144 Millennium Falcon

The Millennium Falcon was a Corellian YT-1300 light freighter used by the smugglers Han Solo and Chewbacca during the Galactic Civil War. It was previously owned by Lando Calrissian, who lost it to Solo in a game of sabacc.

Its aged appearance belied numerous advanced modifications to boost the ship's speed, weapons and shield, including a hyperdrive engine among the fastest in the entire galaxy, enabling it to outrunImperial Star Destroyers. It also included sensor-proof smuggling compartments, which were used during the rescue of Princess Leia Organa to evade Imperial stormtroopers. Afterwards, the Millennium Falcon saw further action when Solo chose to join the Rebels during the Battle of Yavin, where it was able to sneak up on Darth Vader'sTIE Advanced.

After Han was captured on Bespin, Lando took command of theFalcon once more to search for him, and later flew the ship at theBattle of Endor, where it entered the Death Star II and destroyed it from within. During this battle, the starship's circular sensor dish was knocked off as Calrissian piloted it through the Death Star's interior.

In addition to its renowned hyperdrive, which made the Falconboasted as the "fastest ship in the galaxy," the ship was equipped with a backup hyperdrive. Compared to the primary engine, it was much slower and often took several weeks or months to reach the nearest star system. It also had a dejarik table featuring creatures found throughout the galaxy.

At some point over the following thirty years, the sensor dish was replaced with a rectangular model.

RM199.00
img
SAVE RM71.80

[Star Wars] 1/72 First Order Special Forces Tie Fighter

From "Star Wars: the force Awakens", the first order special forces tie fighter is making its way to the band a I Star Wars plastic BAN203219 lineup!
Utilizing CG prop modeling, every small detail in this 1/72 scale BAN203219 are reproduced accurately to scale.
Two view ports are included, one clear, and one utilizing the cockpit frame. Use the included laser effect parts with moveable turrets and the display base resembling the Jake desert to recreate your favorite scenes! set includes dedicated display base, laser effect parts, two viewports (clear and frame), and two 1/72 pilots (seated). water-transfer decal x1. Marking sticker x1. Instruction manual x1.

RM72.00
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 001 - Star Destroyer

[Star Wars] Vehicle Model Series 001 - Star Destroyer
  • Height 111mm
  • Reproduced in detail the form and detail while small size.
  • Display base is included.

RM24.60
img
SAVE RM51.80

[Star Wars] 1/72 A-Wing Starfighter

[Star Wars] 1/72 Modelkit A-Wing Starfighter

[ INCLUDED ACCESSORIES ]
  • Dedicated display base x 1
  • Turbolaser x 1
  • Laser effect part x 2
  • 1/72 Pilot (seated) x 1
  • Landing gears x 1 set
  • Canopy x 2 types (frame & clear part x 1/clear part x 1)
  • Water-transfer decal x 1
  • Marking sticker x 1

RM92.00
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 003 - Poe's X-Wing Fighter

[Star Wars] Vehicle Model Series 003  Poe's X-Wing fighter

  • Length: 85mm
  • Marking stickers replicate Poe's X-Wing Starfighter's distinctive lines.
  • The X-Wing Starfighter's distinctive wings open and close.
  • Includes a display base.

RM24.60
img
SAVE RM51.80

[Star Wars] 1/72 Tie Interceptor

[Star Wars] 1/72 Tie Interceptor 

[Accessory] 
Dedicated display base x 1 
Laser effect parts x 2 
1/72 pilot (seating) x 1 
view port x 2 types (clear parts x 1 - frame parts x 1) 
water transfer type decal x 1 
marking seal x 1

RM92.00
img
SAVE RM11.30

[Star Wars] Vehicle Model 005 Series - Y-Wing Starfighter

[Star Wars] Vehicle Model 005 Y-Wing Starfighter


Length: 112.6mm
Reproduced down to the tiniest detail.
Accurate detail even down to the underside.
Includes a display stand.

RM24.60
img
SAVE RM56.70

[Star Wars] 1/72 Tie Striker

[Star Wars] 1/72 Tie Striker

  • Manufacturer: Bandai
  • This is a scale model,  assembly needed.
  • Pre-painted plastic, no paint require. Stickers / Water Decal Included

RM105.00
img
SAVE RM48.80

[Star Wars] 1/144 U-Wing and Tie Striker

[Star Wars] 1/144 U-Wing & Tie Striker

[INCLUDED ACCESSORIES ]
Dedicated display base x 2 (for U-Wing Fighter / for TIE Striker)
Laser effect part x 2 (for U-Wing Fighter)
Canopy x 2 types (for U-Wing Fighter)
[clear part x 1 / frame part x 1]
Pilot x 2 types (for U-Wing Fighter)
Landing gears x 1 set (for U-Wing Fighter)
1/144 Combat Assault Tank x 2
1/144 Combat Assault Tank driver part x 

RM83.00
img
SAVE RM53.70

[Star Wars] 1/48 Snowspeeder (1/144 Snowspeeder Included)

[Star Wars] 1/48 & 1/144 Snowspeeder

Comes with 1/48 Model Kit and also 1/144 Model Kit

RM108.00
img
SAVE RM83.60

[Star Wars] 1/144 AT-AT

From Star Wars: Episode V - the empire strikes back, comes the AT-AT in 1/144 scale! the 4 legged mobile transport has stunning details even down to the side paneling.
Recreate the memorable attack at the battle of Hoth scene with multiple kits!  legs feature individually movable joints that can even bend low enough to recreate the massive behemoth being defeated,  side panels can also be removed. A nipper or sprue cutter (sold separately) is required for assembly, but does not require glue. Also includes seated pilot, part swappable landing gear options, water slide and sticker transfer options. 

Set includes snow themed dedicated display base, laser effect parts x2, leg Dampers,1/144 pilot x2, articulated head and legs, and laser gun x2.

RM168.00
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 008 - AT-ST & Snowspeeder

[Star Wars] Vehicle Model 008 AT-ST & Snowspeeder

Snowspeeder Length: 40mm
AT-ST Height: 60mm
A set including AT-ST and Snowspeeder
Features incredible detail.
Includes a display stand for Snowspeeder.

RM24.60
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 009 - Jedi Starfighter

* The Jedi Starfighter as seen in "Star Wars Episode II: Attack of the Clones" joins the Vehicle Model series!

PRECISE DETAIL
* Highly detailed molding in a palm-sized scale.

ACCURATE FEATURES
* Hyperdrive Docking Ring is detachable!

RE-CREATE SCENES
* Display alongside the "1/144 Slave I Jango Fett Ver.” (sold separately) to replicate key scenes from the film!

[ INCLUDED ACCESSORIES ]
* Dedicated display base x 1

[ CONTENTS ]
* Sprue x 4
* Marking sticker x 1
* Instruction manual (printed on package)

RM24.60
img
SAVE RM77.70

[Star Wars] 1/144 Slave I (Jango Fett's Ver.)

This is a Fine Molds 1/144 scale assembly and painting required plastic model kit of Jango Fett's customized SLAVE I from the motion picture series Star Wars.

Model kit features: Contains 116 parts and 1 decal for one SLAVE I Jango Fett's customized version. Each to-scale piece painstakingly recreated to precisely reflect actual size. Parts created to facilitate ease of assembly.

Finished model approximately 5" high and 5.25" wide.

RM149.90
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 010 - A-Wing Starfighter

[Star Wars] Vehicle Model Series 010 - A-Wing Starfighter


2 units in the package

RM24.60
img
SAVE RM53.70

[Star Wars] 1/72 Poe's Boosted X-Wing

The upgraded version of Poe Dameron’s X-Wing with boosted accelerator pod as seen in “Star Wars: The Last Jedi.”

Resistance engineers have retrofitted a new device for Poe to give an extra edge in combat, allowing Poe much needed speed to outmaneuver the First Order. Utilizing Bandai's trademark color injection molding techniques, the 1/72 X-Wing features opening and closing S-foils, laser effect parts that can attach to the wings, a cockpit with 2 different canopy options, and 2 display stands. A nipper or sprue cutter (sold separately) is required to remove parts from runners, but does not require glue to assemble.

Set includes 2 types of Dedicated display base stands (1 Aqua Clear and 1 Black), Pilot x1, BB-8 x1, RO-H2 x1, Laser effect part x 2, Landing gears x 1, 2 types of canopies (frame and clear version). Parts for the original version from “Star Wars: The Force Awakens” are also included. Water-transfer decal x 1 Marking sticker x 1.

Product Details

  • Size: Wingspan Approx 6 inches, Body 6.7 inches when built

RM108.00
img
SAVE RM716.00

[Star Wars] PG 1/72 Millennium Falcon

[Star Wars] PG 1/72 Millennium Falcon
Estimate Arrival: September 2017


"Millennium Falcon" which appeared in the memorable first work "Star Wars / New Hope" published in 1977,
Bandai's best model brand "PERFECT GRADE" series embodying the ultimate appearance appeared.

Thoroughly researched "1.7 m model for photography" with the theme of "complete reproduction", not only to shape the appearance,
From the cockpit and the inside of the laser cannon, faithfully reproduce without any compromise. In the case of

● Inspiration for reproduction during the play - Obsession with Accurately Recreating the Millennium Falcon from the Movie -
Thanks to Mr. Takahashi and Ms. Washimi of the researcher for two years coverage of local interview, shooting model,
I thoroughly studied the "model for shooting 1.7 m".

It reproduces all the information amount of the shooting model, 1/72 scale It is a large size of 482 mm total length, and the shooting model is thoroughly reproduced.

● Reproduction of higher order details - Reproducing the Finest Details -
Of course not only the exterior but also the internal detail structure is made thoroughly.

· Cockpit
Reproduce the shape from the panel of the seat and the console part to the instruments on the wall.
By organizing, the structural understanding of manipulating "Millennium Falcon" deepens.

· Laser cannon
Including gunner's seat and laser gun trigger inside.
Besides, it covers a precisely reproduced 4-linked laser cannon.
You can also experience the sense of distance between gunner and laser gun at battle.

Nose
Hole wall surface
Not only the structure inside the hole, but also the various structures on the side of the cylindrical hole are reproduced without exception.
In the case of
Side detail
We also pursue stereoscopic expressions by effectively dividing parts densely of side details.
Tubes that run side-by-side and side-by-side are used in conjunction with independent parts to realize a shape that is closer to the shooting model.

Central detail
In the very intricate central part, we also grasp the exact shape in the interview and research on "Model for shooting 1.7 m".
Faithfully reproduce complex structures.

- Aircraft rear part / Around the duct
Millennium Falcon top detail features dense details are being built in detail.
The net part of the duct is a selection formula of plastic parts and etching parts, pursuing finer reproduction.

* Light emitting gimmick - LED Light - Up Feature -
Production of light that complements the impression in the play.
That figure illuminated by light gives the illusion as if it is just about to fly away.

* Sub-high speed engine
In "PG 1/72 Millennium Falcon", I respected the first work and dare to reproduce with white LED.
The distinctive belt-shaped engine part reproduces lighting like in the play by using light guiding parts.

* Landing gear / Entrance
Characteristic three legs are illuminated by LEDs, and the aircraft is supported with the powerfulness as in the play.
By illuminating this place the parking condition can be reproduced.

A dense mold is engraved into the elevation mouth,
Even now it creates an atmosphere that Han solo is going down from there.

*Cockpit
Like the cockpit in the play, the characteristic rear panel lights up, reminding the scene in the play.

[Contents of set] Main body, LED unit, Etching parts, Water transfer decal, Dedicated pedestal

-----------------------------------------
1/72 scale assembled plastic model
Target age: 15 years old and over
Main product material: PS / AS / ABS / PE
*AAA batteries x 3 (sold separately) are required.
*For fixing the battery lid, a Phillips screwdriver (sold separately) is required.
*Scissors, pliers, instant adhesives etc. are required for etching parts to assemble the etching parts.

RM1680.00
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 002 - X-Wing Starfighter

  • Height approx 86mm
  • In marking seal, reproduce the characteristic line of the X-wing starfighter.
  • That is characteristic wing of the X-wing starfighter is possible deployment.
  • Display base is included

RM24.60
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 007 - Tie Advanced x1 & Fighter Set

[Star Wars] Vehicle Model 007 Tie Advanced x1 & Fighter Set

Length: 44mm
A two-vehicle set including TIE Advanced x1 and TIE Fighter.
Features incredible detail.
Includes a display stand.

RM24.60
img
SAVE RM56.70

[Star Wars] 1/72 Red Squadron X-Wing Starfighter

[Star Wars] Red Squadron X-Wing Starfighter
  • Height approx 86mm
  • In marking seal, reproduce the characteristic line of the X-wing starfighter.
  • That is characteristic wing of the X-wing starfighter is possible deployment.
  • Display base is included

RM123.00

Showing 1 - 30 of 34 products