Glue parts together using Tamiya Cement. Apply a small amount of cement to one of the gluing surfaces and press the parts together. Leave for a while until cement has completely hardened.
Tips: Cement does not work on metal plated surfaces. Scratch off plating of the gluing surface using a knife.
Tips: It is hard to get a good grip on small parts using just your fingers. This can often result in getting cement onto your fingers and dirtying the parts. Using tweezers helps solve this problem.
Glue parts together using Tamiya Cement. Apply a small amount of cement to one of the gluing surfaces and press the parts together. Leave for a while until cement has completely hardened.
Tips: Cement does not work on metal plated surfaces. Scratch off plating of the gluing surface using a k-nife.
Tips: It is hard to get a good grip on small parts using just your fingers. This can often result in getting cement onto your fingers and dirtying the parts. Using tweezers helps solve this problem.
All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity. Index | Parts | Installation |
1. | Sinanju use Metallic eye (Green) x1 | Direct |
2. | Vulcan Canon x2 | drill 1.8mm hole, attached to point with minor cement |
3. | Shoulder thruster - Red C1 x4 | drill 1.5mm hole, attached to point with minor cement |
4. | Backpack Main thruster - Red C6 x2 | drill 2.0mm hole, attached to point with minor cement |
5. | Backpack Sub thruster - Red C5 x4 | drill 2.0mm hole, attached to point with minor cement |
6. | Energy Pipe x28 | Direct |
7. | Skirt Armor Thruster - Red C1 x4 | drill 1.5mm hole, attached to point with minor cement |
8. | lateral Calf Armor Thruster - Red C1 x4 | drill 1.5mm hole, attached to point with minor cement |
9. | Inner Calf Armor Thruster - Red C7 x4 | drill 1.5mm hole, attached to point with minor cement |
10. | Back Calf Armor Thruster - Red C1 x2 | drill 2.0mm hole, attached to point with minor cement |
11. | Shank metal hole - TE1 x4 | attached on the backpack of Sinanju gundam |
12. | Lateral Vents 2.5mm x12 | attached on the backpack of Sinanju gundam |
13. | Metal beads x50 | drill 1.5mm hole to attach on it. |
14. | Screw 1.5mm x30 | drill 1.5mm hole to attach on it. |
All pictures shown are for illustration purpose only. Actual product may vary, kindly check on the list below to find out the actual parts quantity. Index | Accessories | Installation |
1 | RG used Zaku Metallic Lens | Direct |
2 | Energy pipe on head | Direct |
3 | Energy - ?pipe on waist | Direct |
4 | Energy - ?pipe on legs | Direct |
5 | Calf Vent | drill 2.5mm hole, to attached on the point; 10 units |
6 | Backpack Red Colour Thruster | drill 1.0mm hole, to attached on the point |
7 | Soles Red Colour Thruster | drill 1.5mm hole, to attached on the point |
8 | Whole Body Armor screws | drill 1.1mm hole, to attached on the point; 20 units |
Tamiya CA cement provides rapid bonding for hard plastic, metal and synthetic rubber etc. The Tamiya quick type CA cement is useful for attaching tiny parts that require quick settlement. The unique dropper style applicator enables you to use one drop at a time. The package includes 2 x micro nozzles, applicator and plug-in CA tube.
MG 1/100 Char's Zaku Enhance Metal Parts Set
Tamiya 74074 Craft Tools - Design Knife Replacement Blade (30 pcs.)
MG MS-06J Zaku II Ver 2.0 Enhance Metal Parts Set
[Metal Part] MG 1/100 MS-06S Zaku II (Johnny Ridden Custom) Ver.2.0 Metal Enhancement Part Set
[Metal Part] MG 1/100 MS-06J Zaku II Ver.2.0 (WHITE OGRE) Metal Enhancement Part Set