RGM-79(G) GM Sniper

- Dry Suit Gundam UC Center edition of HGUC finally!
- UC, of course, ZZ was at arms also included!
UC Gundam comes armed with a bazooka and the heat was at saber. ZZ appeared in more Tomahawk beam, the beam is attached Lancer. The beam section is a clear reproduction.
- Beam Gatling reproduced!
Gatling reproduction is characteristic of the sensor inside the drive sleeve. The slide mechanism is also reproduced by the replacement cover.
- Reproduce Toraiburedo!
The back is equipped with three armed Toraiburedo center dedicated dry. Stored state, each state included three deployments.

- Accessories: bazooka, heat saber, beam tomahawk, beam Lancer, fist (right)
Have the manual grip (left), Toraiburedo (Stuffed expanded state) x— 3 each

• 4th Platoon immortal] Jim Cannon II on the HGUC sortie! 
  
• Completely reproduce a serious, dignified form. 
  
• Camera head is clear and reproducible. 
  
• Beam Cannon is moving 90 degrees. 
  
• Reproduce the sword saber storage. 
  
• Various hand parts are included. 
  

Another one of the Innovators' superior Mobile Suits gets the HG plastic kit treatment, this time featuring Bring Stabity's melee-type Garazzo! This sharp snap-fit kit comes molded in color and features polycapped joints for striking action poses. It comes equipped with its signature pair of GN Beam Claws, and the shield part on its left shoulder armor can slide out to display it with GN Field activated. Garazzo's backpack houses the cockpit and its GN Drive, and can be detached from the Mobile Suit as an escape pod. A sheet of foil stickers and a display stand are provided. Accessories: 2 and 2 and 2 and special stand × flat part of the hand × 1 grasp person × beam saber Technology and Combat Characteristics Garazzo is designed to be a melee-type MS, possessing superior mobility, strength, and speed; capabilities that exceed those of A-Laws' GN-X MS units and highly formidable against Celestial Being's Gundams; Garazzo possesses enough physical power to subdue a Gundam. Garazzo has a similar appearance to Gadessa, retaining much of the frame and weapons such as the GN Cutters and GN Vulcans while having spikes to the head, shoulders, knuckles, and a large shield built onto its left shoulder. Its shoulder-shield can slide open to generate a GN Field, capable of deflecting and shielding against Celestial Being's beam weaponry. Its armament includes beam claws, stored inside the fingers of its hands, which can be combined into two beam sabers; these beam sabers have enough power to slice through 00 Gundam's GN Sword IIs. For long distance missions, Garazzo has a optional GN Booster that can connect to its legs and increase its speed. Garazzo also has an improved version of the GN Drive Tau that can rival the performance of a Third Generation Gundam's original GN Drive. There is a Gundam face hidden behind its face. Near the end of the war against Celestial Being, Garazzo was even equipped with its own Trans-Am System, of which its design was copied from Celestial Being via espionage. Source:wikipedia Reviews by Versus Z

Not just any custom-colored Mobile Suit of the Human Reform League's Tieren model, this hot pink Tieren Taozi is customized for the use of super-soldier Soma Peries! A highly capable machine that manages to battle on par with Celestial Being's Mobile Suits, the Tieren Taozi has a weapons loadout that includes a 200mm x 25 caliber smoothbore gun (space type), carbon blade, and a 30mm machine gun. Fully articulated upon completion with the use of polycap joints, this kit has other movable parts including its mono-eye and the flexible shields on each shoulder. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

• MS appeared in the person to be judged Mobile Suit Gundam Gaiden] Sega Saturn
  
• Commercialized in HGUC series [Blue Destiny Unit 2].
  
• Groin axis movable to reproduce the rifle poised by Standing knee.
  
• In addition to the normal moving around, the shaft shoulder is also reproduced on the mobile, can reproduce the scene more realistic shooting.
  
• Sort deployed in parts with the same storage unit on the outside of the shin saber reproduce the internal mechanism.
  
• Marking included.
  

MSM-04 Acguy

- Unicorn Gundam Unicorn mode and Destroy mode are both released at the same time! Unicorn Gundam Unicorn mode is No.101 of HGUC - By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. - By replacing the parts that moves in the anime, the image of transformation has been emphasized without actually transforming. - Uses the PS material that doesn't contain ABS, great for paint users. - Use of new type polycap allows increased posing range. - Includes: Shield (Closed) x1, Beam Saber (with beam) x2, Hyper Bazooka (Closed) x1

• Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining!
  
• Includes a huge part Shainingufinga effects. God Gundam can be installed into.
  
• Fingasodo also included.
  
• Supermode can be reproduced with the deployment of replacement parts of the head!
  
• Koaranda removable.
  
• Accessories: hand grip for the left saber hand grip, left Shainingufinga, Bimusodo core length, Short Sword core beam, sword, finger シャイニングフィンガーエフェクトパーツ
  

- Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining! - Favorite horse [restart Fuuun] together make your emergency. - Reproduce the mantle retracted during deployment. Work which can be replicated in the play peek hand from the cloak. - The base of the cross is a master / sculpture unbeaten 144 east. By adjusting the cut position Can be held in Masutagandamu. - Includes: Cape (Osamu Osamu expanded range), cross-hand grip + master effects, amazing fist heaven Ishiba, left Hirate, Dakunesufinga left, right and left wrist postures

Two kits in one, this HG G Armor kit comes with parts to build the G Fighter and the RX-78-2 Gundam! Not a speck of detail is lost, even in this fairly small scale; The G Fighter can transform into the G Blue, G Blue E-z, G Sky, and G Sky E-z, when completed. The RX-78-2 is transformable, too (well, its lower half comes off!) to allow you to build the Gundam Sky. Neat PVC caterpillar tracks are included for the G Blue and G Blue E-z (the tracks can also be retracted into the body of the main machine), and an unbuilt display base allows you to show off the various modes to their very best effect! Of course all the parts are molded in coloured plastic, and snap together, so no paint or glue are required. Polycaps are included for all the movable joints; foil stickers are included for detail. Don't miss out on this terrific set!

Sharp HG kit of the main machine from "Gundam SEED Destiny", the Force Impulse Gundam. A neat design that transfers well to a HG kit, with parts molded in colour and all featuring snap assembly (so no glue or paint are required); and to make it even more appealing, the Force Impulse Gundam is transformable when finished, breaking down into the Force Silhouette, Chest Flyer, Leg Flyer, and Core Splendour! Instructions for building the model and for transformation are included -- all in Japanese but clearly illustrated for ease in use.

Bandai's new HG version of the new flying mecha from Gundam Seed does a nice job on this very attractive design, without making you spend a fortune! Check the pose in the lower right photo below; yes, this machine's legs are really that flexible, even in this scale! And those finned jet units off the back are very cool, too. Have fun!

Accessories: Shigurubureido, needle gun × 2 (reproduced only molded knee).

•  Accessories: Beam Lariat × 2 (× 2 beams on each side), shoulder tackle beam (beam on each side) × 8, Knee kick the beam (beam on each side) × 6
  

- Mysterious Enemy [UE (Enemy Unknown). - To reproduce the variation of the dragon type. - Reproduce the entire body poses in a play at full capacity. - Clear parts spec chest beam cannon. - Accessories: beam saber, hand grip (left), flat hand (left) According to wikipedia: The Gafran is the mainstay transformable mass production MS used by the Vagan nation, and is characterized by its humanoid shape. The Gafran shows superior traits than the RGE-B790 Genoace in terms of offense, mobility and defense. Prior to the appearance of the AGE-1, it was thought to be invincible. There are color variations but it is unknown what they are supposed to distinguish. It possesses the ability to transform into an alternate "dragon-like" mode. A common feature of these machines are the waist-mounted movable stabilizer wings . It appears that when encountering something new, the Gafran can scan it using a red light. What this scan does is unknown. Vagan machines are installed with a self-destruct mechanism in order to prevent technology and information from getting into the hands of the Earth Federation military . By A.G. 164, this function is removed from most Vagan MS [5]. The majority of the Gafran's weapons are fixed, save for the handheld Colony Destroyer weapon. The majority of seen Gafran have been blue in color, however occasionally a more uniquely colored unit is seen that acts as a commander to the standard colored ones. It is unknown if these units are technologically different or if the only changes are aesthetics. Weapons - Beam Rifle: Serves as the Gafran's tail when transformed. Its beam rifle can be held over or under the right shoulder when in use, it is a powerful long-range weapon that can destroy a mobile suit with one shot. - Beam Vulcan/Beam Saber: Mounted on both hands. Fairly effective at damaging or destroying most human made creations, however, it wasn't powerful enough to damage the AGE-1 Gundam AGE-1 Normal. Its beam vulcan also possesses the ability to generate a beam saber. - Diffuse Beam Cannon: Mounted in torso. Generates a very wide beam ideal for eliminating difficult enemies that stand before the Gafran. However, it wasn't powerful enough to damage the AGE-1 Gundam AGE-1 Normal. - Colony Destroyer: Used by the Gafran during the assault on Space Colony Nora, the colony destroyer was a large scale weapon with power that can deal critical damage to a colony.[1] Generally, since Vagan Mobile Suits have internal weapons, this colony destroyer is thought to be an exceptional strategic weapon.[1] The Colony Destroyer is shoulder-fired by a single Gafran that directs the weapon towards the target colony. Gundam Age Series - Unknown Enemy gunpla review Gundam Age Series - Unknown Enemy gunpla review Video 2 Gundam Age Series - Unknown Enemy gunpla review Video 3 Gundam Age Series - Unknown Enemy gunpla review Video 4

- MS-volume of the Earth Federation Army. - Clear plastic canopy specification reproduces the internal mechanical details. - Reproduce the entire body poses in a play at full capacity. - Visit each armed gimmick. - Comes with a variety of weapons! - Accessories: Beam Spray Gun, Heat sticks, hand grip with arms (left), flat hand (left hand only)

From Gundam Seed, the impressive and dark "Raider Gundam" in 1/144 scale is able to transform from Mobile Suit mode to Mobile armor mode, when completed. Fantastic design allows for high flexilibity and posing of the completed Gundam. Molded entirely in colored plastic and featuring snap-fit assembly, this is a fantastic new entry into the Seed lineup!

An excellent High Grade kit of the Chaos Gundam, from Gundam SEED Destiny. All parts are molded in colour with terrific detail; all parts snap together, for easy assembly. Polycaps for the joints allow flexibility and lots of great poses. When completed, the Chaos Gundam can transform to Mobile Armour Mode. Paint is not necessary but would definitely improve the look of the finished model.

From the incredibly popular newest entry into the Gundam universe, Gundam Seed, comes a High Grade version of the Forbidden Gundam. Molded expertly in colored plastic, featuring Bandai's innovated multi-gate technology (which allows multiple colors to be shot on a single runner), it's extremely well-detailed as is typical of HG kits. Joints are movable via polycaps. The backpack can be pulled up after completion and used as shielding, just as in the series. Stickers are included for details. Though it's molded in color, paint would definitely enhance the appearance of the completed kit.

Fantastic high-grade injection-plastic kit of the Saviour Gundam in 1/144 scale. Beautifully-molded all in colour; this coupled with snap-fit assembly means no paint or glue are required. Polycaps make the joints movable; and the completed model can transform into Mobile Armour mode. Foil stickers for detail are also included.

Andrew Waldfeld's customised Gaia Gundam can transform, when completed, between Mobile Suits mode and Mobile Armour mode. Parts are molded in colour and snap together; foil and clear stickers are included for detailed markings.

• Popular [Gundam UC] HGUC machine or higher than the strongest Jegan! 
  
• Provides a wide range of motion completely new mold! - Hand parts come with a variety of weapons! 
  
• Reproduce the moving frame of the base shield! (Replacement formula). 
  
• Comes with a seal of the `Team` Tri-Star, can be reproduced platoon! 
  
• Camera head is clear and reproducible. 
  
• Set up as a removable saber reproduction. 
  
• Removable covers grenades waist. 
  
• Accessories: saber x 2, shield, beam rifle grip only + For Saber wrist (left), fist (left), flat hand (left)
  

Mecha OverviewThe third of these new prototypes to be produced by Anaheim was the RX-78GP03 Gundam, code-named "Dendrobium." The Dendrobium Stamen is the core component of the incredible weapons system known as the Gundam GP03. Designed to operate in conjunction with the armed base Orchis, the Stamen is equipped with tail binders to lock it in position, and its forearms unfold into special manipulator claws which are used to grab weapons from the Orchis's weapon containers. The Stamen was, for the most part, a standard type of mobile suit, although it did incoporate some differences from other "normal" Gundam prototypes. Instead of the costly Core Block System, the cockpit was of the panoramic cockpit display originally tested in the Gundam Alex. The usual head vulcan guns were absent, replaced by an advanced sensor and avionics package. The backpack was composed of a "docking binder" system to link up with and control the Orchis mobile weapon component. The arms also each incorporated a large, folding manipulator arm, which was used to retrieve the Stamen's own weapons from their storage racks in the Orchis' weapons container pods. The GP03S Stamen was completed at Anaheim's Von Braun City factory and delivered to their La Vie En Rose research dockship, where the Orchis component had also been completed. The only thing left to make the GP03 field-ready was piloting and combat data. On November 11, the mobile assault carrier Albion arrives at La Vie En Rose, and its crew commandeer the Gundam GP03 as a replacement for the destroyed GP01. Over the next two days, pilot Kou Uraki repeatedly takes this experimental superweapon into battle against the Delaz Fleet. Both the Stamen and Orchis components appear to survive the conflict intact, but their final disposition is unknown, and all records of them are erased in March of the following year.Source:angelfire.com

• Awesome HG kit of the all-powerful and intimidating Gundam GP02A as appeared in the MS Gundam 0083 Stardust Memory OVA. 
• It's a simple snap-fit plastic kit of GP02A that comes with all of its weapons used in the OVA including the giant bazooka and a super thick shield. 
• Included in this kit is a Display Stand that can hold GP02A as if it's floating in space. 
• The display base also allows for another stand attachment where GP01 (sold separately) can be attached for a beam saber fight display with GP02A as seen in the OVA series.
  

Strum Dias (HGUC)HistoryThe Schuzrum Dias (also Sturm Dias) is a mobile suit from the anime series Mobile Suit Gundam ZZ. The Schuzrum Dias is a further improved model of the RMS-099 Rick Dias and MSA-099-2 Rick Dias II. It has a flared-out armor piece on the head for better protection of the sensors. The random binder propellant tank was upgraded into grye binder by mounting extra thrusters and verniers. This grye binder also mounts a mega beam gun similar to Rick Dias II's. Anaheim Electronics was forced to provide the Schuzrum Dias to Neo Zeon during the First Neo Zeon War.Source: wikipedia

- Custom aircraft appeared only source Genoa Wolf! - The white uniform of this mecha is a personal color. - Accessories: Beam spray gun, shield, heat stick stick heat beam (replacement for difference), Gun.

GN-009 Seraphim Gundam (HG) Carried on the back of Seravee Gundam, Seraphim Gundam is now offered as a snap-fit plastic kit! Molded in color, Seraphim Gundam will be fully poseable with polycap and ball-jointed articulation upon completion, and it's also transformable into a backpack to attach to the back of Bandai's HG Seravee Gundam kit (sold separately). When in backpack mode, its torso can be slid open into Face Burst mode. Two Beam Sabers and a sheet of foil stickers are included.

Gaia Gundam(HG) Sharp, high-grade snap-together kit of the Gaia Gundam is molded all in colour, so no glue or paint are required! The finished model will transform to Mobile Armour mode. Stickers are included for detail.