Searching for: METAL PARTS products | Bandai gundam models kits premium shop online at Ampang, Selangor | Bandai Toy Shop @ Gundam.my. Our online shop offers wide range of Gundam model kits, Ultraman, Kamen Rider, Digimon Monster Amplified, Dragon Ball, One Piece Grand Ship, S.H.Figuarts etc, plastic kits and more

Showing METAL PARTS product(s)

BUILDER PARTS

Quick View

SAVERM5.85

[Metal Part] Aviation Hole 2.0mm for HG / MG Gundam model kits - 15 units

2.0 mm outer diameter aviation hole.
Package include 15 units of aviation hole for modelling kits customization.
Suitable for HG / RG size model kit

RM7.15

RM7.15 Request Stock

Quick View

SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C1,Red) (2 Units)

[Metal Part] Blue Metal Thruster Vents (C1)

Specifications: Maximum diameter 6.0mm, Height 6.5mm, Joint Diameter 1.5mm
2 units per package

RM7.80

RM7.80 Request Stock

Quick View

SAVERM25.60

[Metal Part] Adjustable Metal Piston (2 units) (LARGE)

Package include 2 units of Metal Piston for model kits customization.
Easy to install
Separate into 3 parts
Length is adjustable
Suitable for 1/100 scales size

RM10.30

RM10.30 Request Stock

Quick View

SAVERM30.60

[Metal Part] MG 1/100 MS-18E Kampfer Metal Enhancement Part Set

MG 1/100 MS-18E Kampfer Metal Enhancement Part Set

It contain 16 types of metal parts for MG 1/100 MS-18E Kampfer to enhance

1. Green Metallic Lens Eye for MG Kamfer x 1

2. Head Vulcan Pod x 2 set

3. Shoulder Thorn Metal Spikes ZC 2 x 3

4. Shoulder Thruster, C1 x 6 set (3 pair)

5. Joining Angle Detailing Enhancement Parts J1 x 4 units

6. Aviation Hole 2.5 mm x 22

7. Chest Part Thruster, C2 x 2

8. Backpack Main Thruster, C7 x 2

9. Backpack Secondary Thruster, C1 x 1

10. Lower Leg Back Thruster, C7 x 2

11. Lower Leg Front Thruster x 2

12. Calf Part Back Thruster x 2

13. Calf Part Side Thruster, C2 x 2

14. Energy Pipe on Waist x 1

15. Flat Head Screw x 30

16. Aviation Hole 2.0 mm x 15

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package

Tools needed for assembling metal parts:

- Tweezer straight/angled

- Modelling kits cutter

- Metal cutter

- Metal wire

- Plastic model kits cement

- Magnifying glass

RM113.40

RM113.40 Request Stock

Quick View

SAVERM21.70

[Metal Part] MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual parts quantity.

Index Parts Installation Instruction

1. Back Pack Thruster x4 drill 1.5mm hole, attached to point with minor cement

2. Back Skirt Thruster x2 drill 1.5mm hole, attached to point with minor cement

3. Lower Leg Thruster x2 drill 1.5mm hole, attached to point with minor cement

4. Elbow Joint Screw x4 drill 2.0mm hole, attached to point with minor cement

5. Knee Joint Screw x4 drill 2.0mm hole, attached to point with minor cement

6. Gatling Gun Muzzle x24 drill 2.0mm hole, attached to point with minor cement

7. Gatling Gun Sight x6 Install directly and attached to point with minor cement

8. Gatling Gun Sight Back Cover x6 drill 2.0mm hole, attached to point with minor cement

9. Booster Thruster x4 drill 2.0mm hole, attached to point with minor cement

10. Aviation hole x15 drill 2.0mm hole, attached to point with minor cement

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package

Tools needed for assembling metal parts:

- Tweezer straight/angled

- Modelling kits cutter

- Metal cutter

- Metal wire

- Plastic model kits cement

- Magnifying glass

RM80.30

RM80.30 Request Stock

Quick View

SAVERM9.60

[Metal Part] MG 1/100 RX-0 Unicorn Gundam 02 Banshee Ver.Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual parts quantity.

Index Parts Installation Instruction

1. Back Pack Thruster drill 1.5mm hole, attached to point with minor cement

2. Elbow Joint Screw drill 2.0mm hole, attached to point with minor cement

3. Knee Joint Screw drill 2.0mm hole, attached to point with minor cement

4. Back Thruster drill 1.5mm hole, attached to point with minor cement

5. Leg Thruster drill 1.5mm hole, attached to point with minor cement

6. Flat Head Screw drill 2.0mm hole, attached to point with minor cement

7. Aviation hole drill 2.0mm hole, attached to point with minor cement

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package

Tools needed for assembling metal parts:

- Tweezer straight/angled

- Modelling kits cutter

- Metal cutter

- Metal wire

- Plastic model kits cement

- Magnifying glass

RM62.40

RM62.40 Request Stock

Quick View

SAVERM17.40

[Metal Part] MG 1/100 RGM-96X Jesta Metal Enhancement Part Set

MG 1/100 RGM-96X Jesta Metal Enhancement Part Set

It contain 7 types of metal parts for MG MS-06J Zaku Ver 2.0 to enhance

1. MG 1/100 LED Unit with Battery (Orange) x 1 (Battery include)

2. Aviation Hole for Head Part 3.0 mm x 15

3. Shoulder Thruster, X1 x 3

4. Aviation Hole for Body 1.6 mm x 15

5. Aviation Hole for Body 2.0 mm x 15

6. Metal Silver Bead Ball 1.5mm x 50

7. Flat Head Screw 2.0mm x 30

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package

Tools needed for assembling metal parts:

- Tweezer straight/angled

- Modelling kits cutter

- Metal cutter

- Metal wire

- Plastic model kits cement

- Magnifying glass

RM54.60

RM54.60 Request Stock

Quick View

SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C2, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C2)

Specifications : Maximum diameter 6.5mm, Height 2.0mm, Joint hole Diameter 1.5mm
Joint stick : 3.0mm
2 units (1 pair) per package
Contain 2 parts: External part is Sliver plated, Internal part is Red plated
Material: Diecast
Stainless

Installation guide:

1)Requires drilling works to create a joining point (3mm)

2)Apply cement to ensure the center joint tightened

RM7.80

RM7.80 Request Stock

Quick View