Price Clear







Showing Gundam Model Kits + REBORN 100 (RE) product(s)

Showing 1 - 18 of 18 products

img
SAVERM79.60

RE/100 Guncannon Detector

- From [Mobile Suit Gundam UC Episode 4 gravity well's bottom], Kit Kanon Detector, which made a fierce battle with Zion army remnants at Torrington Base, became the first kit!

- High detailing various parts such as armor and backpack base, according to the scale feeling of RE / 100.
- In addition, the 'assembly ease' which is the feature of the RE / 100 series is also alive.
- The gimmick pose in the play can be precisely reproduced by the movable gimmick of the leg and the waist.
- Three-dimensional gun canon / detector dedicated beam rifle with precise detail, grenade reproduced with trigger.
- The 170mm Cannon gun used by Nemo deployed at Torrington Base is also included, and it can also be equipped with the MG Unicorn series of the same scale.

- accessories
* Special beam . Rifle x 1
* Beam gun x 1
* Beam . Cannon x 2
* 170mm Cannon gun x 1

- Product content
* Molded product x 12
* Seal x 1
* Marking stick x 1
* Instruction manual x 1

RM160.00
RM160.00 Add to cart
img
SAVERM77.40

RE/100 MS-08TX [EXAM] Efreet Custom

  • The Efreet Custom, long popular in games and side stories, is finally a kit! 
  • Its charm is emphasized by the RE/100 series’ refined construction, detailed exteriors, and easy but flexible assembly. 
  • Translucent parts are used for its backpack-stowable heat saber. 
  • Its hexa-linked missile pod is mounted on a polycap-shaft joint for removability and adjustability!

RM132.30
img
SAVERM180.90

RE/100 MSN-04II Nightingale

  • A new category "Reborn-One Hundred" is born in Gunpla. Extremely detailed appearance and accomplished parts components. 
  • The first model from the category is Nightingale. The rear parts such as the huge skirt, propellant tanks and various vernier nozzles are recreated with precise design. 
  • Its fine design is equivalent to the quality of Master Grade's one. Studies of settings make persuasive details. 
  • The compilation of technique that Bandai has fostered, such as "frameless" and "wedge gates", reduces the time for assembling the kit. Ease of creation increases your motivation. 
  • Runner x32, Tetron sticker x1, Instruction manual x1

RM299.00
img
SAVERM78.90

RE/100 Gundam Mk-III

  • The second release in the new RE/100 category, Gundam Mk-III from "Mobile Suit Z Gundam MSV" has arrived. 
  • With sharp modeling comparable to MG (Master Grade), the appearance of every part of the mobile suit is highly detailed, and elicits the full allure of it. 
  • Although utilizing a frameless structure, this kit combines movability with detailed modeling by a sophisticated parts structure. The time required to build the Gunpla is drastically reduced. 
  • The utilization of a new poly-cap design consolidates three kinds of movability, and that results in a simple but dynamic maneuverability. 
  • The Beam Cannon on the Backpack can swing back and forth. 
  • Along with a beam rifle, beam sabers the Energy-Capacitor and shields, flat hands and hands for gripping a weapon are included. 
  • Runner x9, Foil sticker x1, Tetron sticker x1, Instruction manual x1 

RM130.00
img
SAVERM69.86

RE/100 Gundam GP04 Gerbera


  • The distinctive Strum Boosters on the back are reproduced. 
  • Three boosters are detachable. Upper two boosters can be connected to the Saber Rack. 
  • The Landing Skid of the lower booster can be retracted or lowered with replacement parts. When lowered, the Landing Skid can be used to physically support the Gundam in a standing position. 
  • An abundance of weapons such as a Long Range Rifle, Beam Rifle and Shield are included. 
  • Runner x10, Foil sticker x1, Tetron sticker x1, Instruction manual x1

RM140.00
img
SAVERM74.86

RE/100 MSK-008 Dijeh

  • [Mobile Suit Z Gundam] appeared! Broadcasting 30th Anniversary !! ultra-long-awaited Amuro Ray power machine Adige is to RE / 100
  • MS Adige that Amuro Ray was boarding the first kit in 1/100 scale in [Mobile Suit Z Gundam]. Reproduced in modern form of RE / 100 unique.
  • Reproduce the unique head shape. Mono Eye is made of clear parts, moving from side to side.
  • RE / 100 Gundam Mk-III, was established in Gundam prototype Unit 4 Gerbera, double joint, shoulder pull-out joint, by groin swing joint, to realize a wide range of motion.
  • Characteristic back heat dissipation fin, right shoulder shield, left shoulder rack moving.
  • Weapons beam halberd, Clay bazooka, comes with a beam rifle.
  • MSK-008 land battle Adige ... Kalaba is re-designing the Rick Diaz type prototype MS. Amro was boarding at Kilimanjaro capture game.
  • Accessories: beam rifle, Clay bazooka, beam halberd, smack (left and right), grip hand (left and right), weapon wrist (left and right)

RM135.00
img
SAVERM34.20

P-Bandai Exclusive: RE/100 Efreet Schneid

  • P-Bandai Exclusive: RE/100 Efreet Schneid

RM217.40
img
SAVERM74.70

RE/100 AMX-107 Bawoo

  • - The first three-dimensional in the 1/100 scale ZZ Gundam fan long-awaited bow

  • Also be realized movement of the original gimmick of RE / 100 bow to the left and right of the lumbar region while having the coalescence mechanism.
  • Commercialization and sharp design that conforms to the UC version set
  • Both by RE / 100 own gimmick, the movable mechanism of coalescence and lumbar
  • Realize the RE / 100's first modification coalescence gimmick! RE / 100's first modification coalescence gimmick. With fewer assembly steps, the reproducibility of the separation deformation mechanism.
  • Marking of [Hiryu] of the front armor is reproduced in Tetoron seal.
  • Accessories: beam rifle, beam saber x 2, shield, missile x 2

RM135.00
img
SAVERM44.70

P-Bandai Exclusive: RE/100 Rebawoo

  • P-Bandai Exclusive: RE/100 Rebawoo

RM255.20
img
SAVERM103.80

RE/100 AMX-103 Hamma-Hamma

The mysterious silhouette at the Gundam Expo has now been revealed! The highly anticipated Hamma-Hamma is now part of the RE/100 series! From the original ZZ Gundam, Hamma-Hamma is sculpted with excellent details and proportions. The flexible arm has a large number of gimmicks including the utilization of soft materials and lead wiring to reproduce long-range attacks! Hamma-hamma's shield with mega-particle gun is accurately reproduced and has meticulous detailing, even in the underside. Set includes shield with mega-particle gun, two beam sabers, space eye, and arm display seat x4. Runner x19. Sticker sheet x1.

Accessories:
· Shield with mega particle gun x 1
· Beam · saber x 2
· Spacemain x 1
· Arm display pedestal x 4

RM165.80
img
SAVERM72.00

RE/100 VIGNA-GHINA

RE/100 1/100 VIGNA-GHINA


The Vigna-Ghina from the 1991 animated film "Mobile Suit Gundam F91" makes its first appearance in the RE/100 lineup! The kit includes two types of cockpit hatches, and both forms can be recreated using the included marking seals for its head. Careful work has gone into making the kit extremely posable without altering the suit's design, such as the calf duct moving together with the knee joint. In addition, each of its eight characteristic fin nozzles can move independently. The Vigna-Ghina comes with a big selection of araments, including the beam shield, which has been recreated using clear plastic.

RM120.00
img
SAVERM89.60

RE/100 Gyunei Guss's Jagd Doga

RE/100 1/100 GYUNEI GUSS’S JAGD DOGA


-- Yakuto Dauga (GUNEY · GAS MACHINE) appearing in [Mobile Suit Gundam Char's Counterattack] is three-dimensionalized at 1/100 scale!

- Reproduce the characteristic design with the proportion of the RE/ 100 format, realizing modeling comparable to the MG series.
- While proportioning images in the play, proportions have added detailed details to increase the sense of density.
- All sub-thruster funnels are removable separately. Also equipped with funnel deployment gimmick.
- Color coding of the red part (shield part, subslusters, inner side of various verniers) is reproduced only by assembling it.
- Clear struts that can display all 6 funnels in the deployed state are included.

[accessories]
- Beam · Assault Rifle x 1
- Beam saber x 1
- Funnel x 6
- Shield x1
- Funnel display arm x 6

[Product content]
- Molded article x16
- Marking seal x1
- Foil seal x1
- Instruction manual x1

RM180.00
img
SAVERM76.70

RE/100 1/100 Gun EZ

RE/100 1/100 Gun EZ


- From [Mobile Suit Valley Gundam] series, Gunny appeared in RE!

- Beam · bazooka 's rear armor can be mounted, including shoulder beam · saber storage.
- The dual multi launcher equipped on the shoulder reproduces the opening and closing of the hatch.
- Beam shield with PET material with hologram processing attached.
- Easy to assemble structure that makes use of the simple configuration unique to RE.

[accessories]
- Beam rifle x 1
- Beam saber x 1
- Beam shield x 1
- Beam · Bazooka x 1

[Product content]
- Molded product x 12
- Foil seal x 1
- Marking seal x 1
- Instruction manual x 1

RM133.00
img
SAVERM65.00

P-Bandai: RE/100 Jagd Doga [Quess Paraya]

P-Bandai: RE/100 Jagd Doga [Quess Paraya] 

RM285.00
img
SAVERM55.00

P-Bandai: RE/100 LM111E03 Gunblaster

This kit is based on the recent REBORN 100 release, Gun-EZ from Mobile Suit Victory Gundam, comes with newly molded backpack to represent its variant Gunblaster!

[ACCESSORIES]
  • Beam Rifle
  • Beam Saber
  • Beam Shield
  • Beam Bazooka

RM225.00
img
SAVERM70.00

P-Bandai: RE/100 Type 89 Base Jabber [Unicorn Ver.]

P-Bandai: RE/100 Type 89 Base Jabber [Unicorn Ver.]



A highly detailed representation of the type 89 Base Jabber that was seen in the Mobile Suit Unicorn Gundam! This pod is compatible with most Master Grade and RE/100 models.

The kit comes with dedicated connectors to accommodate various models including...
MG 1/100 Jesta, MG 1/100 Jesta Cannon, MG 1/100 Jegan, and MG 1/100 Jegan D Type

RM190.00
img
SAVERM73.60

RE/100 1/100 Vigna-Ghina II

- Vigina / Gina II is three-dimensionalized from the Mobile Suit Variation [F91-MSV] of [Mobile Suit Gundam F91]

- Shapes of Gundam type heads and flexible wing nozzles are newly designed to the design which imagined the setting.
- Armors such as shot -  lancer and beam -  shield are included.

[accessories]
* Beam * saber x 2
* Shot * Lancer x 1
* Beam shield x1
* Gun handle (right) x 1
* Hirate (left and right) x 1 each

[Product content]
* Molded article x15
* Seal x1
* Marking stick x1
* Instruction manual x1


RM148.00
img
SAVERM10.00

DABAN 6640 RE/100 Gundam Mk-III

DABAN 6640 RE/100 Gundam Mk-III


Brand : Daban 
Country made : China
Scale : 1/100
Grade : RE100
Series : MS Zeta / ZZ

Please note that this is not Bandai product

RM65.00

Showing 1 - 18 of 18 products