Price Clear







Other Series Kits

Showing 1 - 30 of 58 products

img
SAVERM59.70

[Kamen Rider] Figure-rise Standard Masked Rider Geiz

- Heisei Kamen Rider series 20 titles that will become [Masked Rider Georges] [Masked Rider Gates] will line up to Figure-rise Standard!

- Complex color classification is reproduced by thorough part division. Parts that adopted extra finish processing, clear parts, etc., are made up of different textures for each part.
- Characteristic head black reproduces the texture of the mask with matte black extra finish processing.
- Adopted extra finish processing also for the black of the fuselage. Representative proportions peculiar to Gates such as distinctive overhanging chest are thoroughly reproduced.
- Due to the joint structure securing a wide movable range, it is possible to reproduce various action scenes in the play.
- Your mode and Yumi mode are included, respectively, and you can hold them with left and right weapon hands.

[accessories]
- Jikanzachi (your mode -  Yumi mode) x 1 each
- Hand grip hands x 1 right and left 1
- Hira x Left and right each 1
- Weapon holding hands x 1 right and left 1
- Display base x 1

[Product content]
- Molded parts x 11
oil seal x 1
- Nemer seal x 1

RM120.00
RM120.00 Add to cart
img
SAVERM20.00

[Kamen Rider] Figure-rise Standard Masked Rider Double Luna Trigger

-From [Masked Rider W], [Luna Trigger] is a lineup for the figure-rise standard!

-Adopt the block structure of each part to reproduce the half feature which is the biggest feature. Achieves various poses and variations without losing the range of motion.
-Including a special weapon [Trigger Magnum], abundant parts are included.

[accessories]
* Trigger magnum x 1
* Luna memory x 1
* Trigger memory x 1
* Grip hand (left and right) each one
* Square (left and right) x 1 each
* Decisive hand 1 (left) x 1
* Weapon weapon (right) x 1
* Display base x 1

[Item content]
* Molded articles x 6
* Foil seal x 1
* Instruction manual x 1

RM115.00
RM115.00 Add to cart
img
SAVERM59.70

[Kamen Rider] Figure-rise Standard Masked Rider Double Heat Metal

-From [Masked Rider W], [Heat Metal] is a lineup for the figure-rise standard!

-Adopt the block structure of each part to reproduce the half feature which is the biggest feature. Achieves various poses and variations without losing the range of motion.
-A special weapon [metal shaft] and hand parts are included.

[accessories]
* Metal shaft x1
* Metal shaft (when stored) x1
* Heat memory x1
* Metal memory x1
* Grip hand left and right one each
- Left and right hand each one
- Weapon hand right x1
* Decisive hand 1 left x1
* Display base x1

[Item content]
* Molded articles x 6
* Foil seal x1
Instruction manual x1

RM120.00
RM120.00 Add to cart
img
SAVERM56.70

[Kamen Rider] Figure-rise Standard Kamen Rider Kuuga Mighty Form

Release Date: Mar 2020
Estimate Delivery Date: May 2020

-From [Kamen Rider Kuuga], a mighty form that allows you to experience the action of Kuuga appears in [Figure-rise Standard!

-Thorough reproduction of reinforced mighty kick with unique joint mechanism.
-A special range of motion has been developed and installed on the waist to reproduce the landing pose after a somersault or kick. It is possible to reproduce not only kick actions but also all action scenes in the play.
-Knee joint is movable until calf and thigh contact.
-Hip joint rotates about 120 degrees. The toes are also movable.
-Gold parts are reproduced by plating.
-Seven types of hand parts. In addition to left and right hand grips, left and right hands, left and right transformation, right and left hands for thumbs up are also included.
-Includes display pedestal and kick flame effect.

[accessories]
  • Foil seal x 1
  • Fire effect parts x 1
  • Grasping hands (left and right) x 1 each
  • Span (left and right) x 1 each
  • Makeover (left and right) x 1 each
- Sam"e;s up (right) x 1
  • Display base x 1

RM135.00
RM135.00 Add to cart
img
SAVERM17.90

Entry Grade Kamen Rider Zero-One Rising Hopper

- Kamen Rider Zero One Rising Hopper from [Kamen Rider Zero One] appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

- It is fun to assemble an armor into the suit.
- With a small number of parts (27 parts) and a runner arrangement that makes it easy to imagine the finished form, even those who make a plastic model for the first time can assemble quickly!
- Reproduce the difference in suit texture with special processing. Experience the precision of a plastic model!
- No glue or tools required! Easy assembly possible with snap fit and touch gate!

[accessories]
* Runner x 3
* Instruction manual x 1
* Seal x 1

RM42.00
img
SAVERM67.70

Figure-rise Standard Kamen Rider Hibiki

  • Kamen Rider Hibiki line up in Figure-rise Standard!
  • Thorough reproduction of proportions in the play.
  • Uses a newly developed polarization molding color to reproduce the characteristic suit color. Reflection that changes like a gradation depending on how the light hits expresses the texture.
  • The gradation of the mask part is reproduced by combining the thickness of the clear parts and the sticker attached inside.
  • The sound angle and sound shooting stick (A, Tun) are molded integrally with the hand parts to express the minute expression of the fingertips holding the weapon.
  • Clear-molded effect parts that can be reattached are included at the tip of the sound hammer and blaze.
  • The attached drum effect can powerfully reproduce the deadly technique.

[Accessories]
Figure-rise effect pedestal x1
Sound
hammer stick, sound hammer effect x2 
Sound drum effect x1
Sound angle x1
Wrist parts Decisive hand (right), dedicated sound angle hand (right), sound hammer stick Handle (left and right), open hand (left and right), handgrip (left and right)
Foil seal x1
Tetron seal x1

RM136.00
RM136.00 Add to cart
img
SAVERM17.90

Entry Grade Kamen Rider Saber

Kamen Rider Saber is now available in the introductory series "ENTRY GRADE" for all inexperienced plastic models!
? Because it is a touch gate, you can take the parts by hand with "Petit!"!
? Although the number of parts is simple (about 36 parts), the characteristic color coding of each part is firmly expressed.
? Two types of right hands, a hand holding a sword and a fist, are included, and you can enjoy changing them!
? No adhesive or tools required. The instructions are colored for easy viewing.

RM42.00
img
SAVERM219.00

[Kamen Rider] MG Figure-rise Artisan - 1/8 Kamen Rider Double Cyclone Joker

MG Figure-rise Artisan - 1/8 Kamen Rider Double Cyclone Joker

RM380.00
RM380.00 Add to cart
img
SAVERM77.60

Figure-rise Standard Kamen Rider Ryuki

Kamen Rider Ryuki appears as the 11th work of the project to make all the main characters of Heisei Kamen Rider into plastic models!

??  The silver part is expressed with an extra finish.
??  The opening of the head slit is realized by ultra-thin molding. The compound eye under the slit is a clear red part, and the characteristic mask is thoroughly reproduced.
??  Five PET advent cards are included. The upper part of the drag visor slides forward and you can load the Advent card.
??  A handle for the card is attached, and the loading image can be reproduced.
??  A drag redder with a total length of about 630 mm is included.
??  By using some parts of the drag redder, sword vent and guard vent can be reproduced. Strike Vent pursues the atmosphere when worn and creates special drag claw parts.
??  Movable joints and a pedestal for drag redders enable a display that imagines the scene in the play.

[Accessories]
??  Drag Redder x 1 
??  Drag
?? Claw x 1
??  Wrist Parts Determinant (Right), Card Handle (Right), Grip Hand (Left and Right), Weapon Holder (Left and Right), Flat Hand (Left and Right)
??  Advent Card x 5 Seed
??  Drag redder pedestal x 2
??  Figure-rise Effect pedestal x 1
??  Foil seal x 1

RM180.00
RM180.00 Add to cart
img
SAVERM35.00

Bandai S.H. Figuarts Shinkocchou Seihou Shadow Moon Figure (Kamen Rider Black)

-Another Century King Shadow Moon appears with a true bone carving method!

-The soft parts used in [SHFiguarts (true bone carving method) Kamen Rider BLACK] are used this time as well. Reproduce both types of leg triggers while walking using movable and replacement !! Two patterns of pants parts are included, one that emphasizes appearance and the other that emphasizes movement! [SHFiguarts (true bone carving method) Kamen Rider BLACK] (sold separately) also comes with wrist parts to hold Satan saber, improving scene reproducibility!

-The other Century King Shadow Moon is revived realistically by the modeling assumed from the human body unique to true bone carving!
-In addition to Satan Saber, two shadow savers are included.
-Replaceable movable pants parts support poses where you sit down and action poses in the play!
-The shaped part like the insect foot of the heel has a movable hinge, and the shafts on both sides can be replaced to reproduce an impressive [walking scene].
-A handle for Satan Saber that can be used with [SHFiguarts (true bone carving method) Kamen Rider BLACK] (sold separately) is attached, and the scene of the latter half of the play can be reproduced!

[set content]
? Main body
? Replacement wrist left 4 types, right 3 types
? Satan saber
? Shadow Saber (Short)
? Shadow Saber (Chief)
? Replacement movable pants parts
? [SHFiguarts (true bone carving method) Kamen Rider BLACK] (sold separately) Weapon holding wrist left and right

RM420.00
RM420.00 Add to cart
img
SAVERM77.60

Figure-rise Standard MASKED RIDER DEN-O ROD FORM & PLAT FORM

  • Figure-rise Standard MASKED RIDER DEN-O ROD FORM & PLAT FORM

RM150.00
RM150.00 Add to cart
img
SAVERM77.60

Figure-rise Standard MASKED RIDER DEN-O AX FORM & PLAT FORM

  • Figure-rise Standard MASKED RIDER DEN-O AX FORM & PLAT FORM

RM150.00
RM150.00 Add to cart
img
SAVERM77.60

Figure-rise Standard MASKED RIDER DEN-O GUN FORM & PLAT FORM

  • Figure-rise Standard MASKED RIDER DEN-O GUN FORM & PLAT FORM

RM150.00
RM150.00 Add to cart
img
SAVERM59.70

[Kamen Rider] Figure-rise Standard Masked Rider Agito Ground Form

  • The long-awaited commercialization of Kamen Rider Agito Grand Form!
[Accessories]
  •  Cross horn deployment parts x 1
  •  Wrist parts Grip hands (left and right), flat hands (left and right), decisive factors (left and right)
  •  Effect parts x 1
  •  Figure-rise Effect pedestal x 1
  •  Foil seal x 1

RM132.00
RM132.00 Add to cart
img
SAVERM39.70

[Kamen Rider] Figure-rise Standard MASKED RIDER FAIZ AXEL FORM

  • Figure-rise Standard MASKED RIDER FAIZ AXEL FORM

RM152.00
RM152.00 Add to cart
img
PO PriceRM165.00

S.H.Figuarts Kamen Rider Revi Rex Genome (First Production)

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : FEB 2022 
Estimate arrival : MAR 2022

- P-O Price RM165.00 
- Deposit RM50, Balance RM115.00 
- We will inform to make balance RM 115.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

-From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Rex Genome] is now available in SHFiguarts at the first production limited price!

-High quality [SH Figuarts Kamen Rider Revere Rex Genome] that expresses the vivid metallic pink and metallic blue of [Masked Rider Revere Rex Genome] with coloring and also incorporates the gimmick of the belt is now available at the first production limited price!

-From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Rex Genome] will be released at the same time as his partner [Kamen Rider Revice Genome] at SHFiguarts!
-The belt\'s [Revice Driver] has a built-in movable gimmick, which allows you to reproduce the action of tilting the bi-stamp like a lever and the action of rotating the stamp stamping surface!
-Multiple replacement wrists are attached, and various impressive poses in the work are expressed with SHFiguarts!
-The wide range of motion that SHFiguarts is proud of allows you to take action freely!
-A wrist that can hold the [Oin Buster 50 (Ax Mode / Gun Mode)] that comes with the separately sold [SHFiguarts Kamen Rider Vice Rex Genome] is also included!

[set content]
? Main body
? Replacement wrist left and right 4 types each

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM200.00

S.H.Figuarts Kamen Rider Vice Rex Genome

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : FEB 2022 
Estimate arrival : MAR 2022

- P-O Price RM200.00 
- Deposit RM50, Balance RM150.00 
- We will inform to make balance RM 150.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

-[Masked Rider Revice Rex Genome]\'s companion, [Masked Rider Vice Rex Genome] will be released in the same month as SHFiguarts!


-[SHFiguarts Kamen Rider Revice Rex Genome] will be released at the same time as [SHFiguarts Kamen Rider Revice Rex Genome]! [Oin Buster 50] that can be used not only for the muffler and tail to move, but also for [SHFiguarts Kamen Rider Revice Rex Genome] (sold separately) comes with 2 types of gun mode and ax mode!

--From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Genome], the transformation of [Kamen Rider Revice]\'s companion demon, is now available in SHFiguarts !
-Weapon [Oin Buster 50] comes with 2 types of gun mode and ax mode! It is also possible to have it in the separately sold [SHFiguarts Kamen Rider Revice Genome]! Further! [Megalodon by Stamp] is included! [Kamen Rider Revice] series comes with bi-stamps one after another!
-With abundant replacement wrists, you can express the poses of Kamen Rider Vice showing various expressions!
--The characteristic muffler and tail are made of soft material. Since joint parts are also included at the base, you can move freely according to the action!
-[Kamen Rider Vice] that takes free action even in the play is three-dimensionalized with a wide range of motion like SHFiguarts!

[set content]
? Main body
? Replacement wrist left and right 4 types each
? Oin Buster 50 (Gun Mode)
? Oin Buster 50 (ax mode)
? Megalodon by stamp

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM143.00

Figure-rise Standard Kamen Rider Ghost Ore Damashii

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : APR 2022 
Estimate arrival : APR 2022

- P-O Price RM143.00 
- Deposit RM50, Balance RM93.00 
- We will inform to make balance RM93.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
  • From Kamen Rider Ghost, Kamen Rider Ghost Ore Soul is now available in Figure-rise Standard!
  • The precise lines of the whole body in transient form are reproduced with a plastic sticker with excellent color development.
  • The characteristic ghost driver is expressed with clear parts.
  • Combine Transient Form with Ore Ghost parts to enter Ore Soul state. You can enjoy assembling while imagining the transformation in the play!
  • Various hand parts are included, allowing you to express impressive poses when activating a special move.
  • Reproduce the characteristic hoodie.
  • Gun Gun Saver comes with one blade mode and one gun mode.
  • Dedicated parts for equipping Neo Decadriver are included.
  • A pedestal for Ole Ghost is included.

[Accessories]
Gun Gun Saver (Blade Mode / Gun Mode) x 1
Ole Ghost Parts x 1
Ole Ghost Pedestal x 1
Joint Parts x 1
Hand Parts x 1
Figure-rise Effect Pedestal × 1
Seal × 1
Plastic seal × 1

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM130.00

[Pre-Order] Figure-rise Standard Kamen Rider BLACK

This is a P-O Product

Please read all the detail and condition before make order. 
Office Release : JUN 2022 
Estimate arrival : JUN 2022

- P-O Price RM130.00 
- Deposit RM30, Balance RM100.00 
- We will inform to make balance RM 100.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
  • Kamen Rider BLACK is now available in Figure-rise Standard!
  • The knee joint is movable until the calf and thigh come into contact. A powerful action pose that imagines the play is decided.
  • The characteristic red and yellow lines and details such as chest parts are expressed by dividing the parts.
  • Thorough pursuit of differences in texture for each part, such as glossy expression with a glossy mirror finish and extra finish on the silver part.
  • Five types of left and right hand parts with rich expressions and joint parts are included so that you can respond to various action scenes.

[Accessories]
Hand parts x 1 set
Figure-rise Effect pedestal x 1
Joint parts x 1 set
Seal x 1

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM158.00

[Pre Order] Figure-rise Standard Kamen Rider OOO Tajadoru Combo

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : APR 2022 
Estimate arrival : APR 2022

- P-O Price RM158.00 
- Deposit RM50, Balance RM108.00 
- We will inform to make balance RM 108.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

This Figure-Rise Standard kit comes with a number of accessories, such as a miniature attachable Taja Spinner, OOO Driver, and the Taka, Kujaku, and Condor Medals. This Figure-Rise Standard Kit also comes with detachable accessories such as back feather wings and additional four sets of posable hands.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM158.00

[Pre-Order] Figure-rise Standard Kamen Rider Kuuga Titan Form / RisingTitan

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : MAY 2022 
Estimate arrival : MAY 2022

- P-O Price RM158.00 
- Deposit RM50, Balance RM108.00 
- We will inform to make balance RM 108.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

[Pre-Order] Figure-rise Standard Kamen Rider Kuuga Titan Form / RisingTitan

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM150.00

S.H.Figuarts Kamen Rider Zero-One Rising Hopper 50th Anniversary Ver. (Completed)

[PREORDER] [PREORDER] [PREORDER] 

Please read all the detail and condition before make order. 

Release Date : DEC 2021 
Estimate arrival : JAN 2022 

- Preorder Price RM150.00 
- Deposit RM30, Balance RM120.00 
- We will inform to make balance RM 120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

 ###############################################################

- In commemoration of the 50th anniversary of Kamen Rider\'s birth, Reiwa No. 1 [Kamen Rider Zero One] is now available in a special package!


- The No. 1 of Reiwa, [Kamen Rider Zero One], is now available in SHFiguarts in a special package with luxurious foil stamping to commemorate the 50th anniversary of Kamen Rider\'s birth! Various actions can be reproduced while maintaining the excellent movement of [SHFiguarts Kamen Rider Zero One Rising Hopper] released in 2019!

- [Kamen Rider Zero One Rising Hopper] is now available in a luxurious foil stamping package to commemorate the 50th anniversary of Kamen Rider\'s birth !!
- Following the wide range of movement of [SHFiguarts Kamen Rider Zero One Rising Hopper], various actions can be reproduced!

[set content]
* Main body
* Replacement wrist left 3 types, right 4 types

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM156.00

[PRE-ORDER] Figure-rise Standard MASKED RIDER KUUGA PEGASUS FORM/RISINGPEGASUS

[PREORDER] [PREORDER] [PREORDER] 

Please read all the detail and condition before make order. 

Release Date : MAR 2022 
Estimate arrival : APR 2022

- Preorder Price RM156.00 
- Deposit RM50, Balance RM156.00
- Bandai may cut stock for this item, stock will alocate base on first come first serve basis.
- We will inform to make balance RM 106.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable except no stock provided. 

 ###############################################################

When evil comes, a warrior who sees and strikes this evil from afar like a gale shall come to be !!!

Also known as the Green Kuuga, Kamen Rider Kuuga Pegasus Form is released in Shinkocchouseihou.
Comes with Pegasus Bowgun, transformed from a shooting object !

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM152.00

Figure-rise Standard MASKED RIDER KUUGA DRAGON FORM/RISINGDRAGON

[PREORDER] [PREORDER] [PREORDER] 

Please read all the detail and condition before make order. 

Release Date : JAN 2022 
Estimate arrival : FEB 2022

- Preorder Price RM152.00 
- Deposit RM30, Balance RM122.00
- Bandai may cut stock for this item, stock will alocate base on first come first serve basis.
- We will inform to make balance RM 152.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable except no stock provided. 

 ###############################################################

When evil comes, a warrior who voids its skills and quells the evil forces like a stream shall also come to be !!!

Also known as the Blue Kuuga, Kamen Rider Kuuga Dragon Form is released in Shinkocchouseihou.
Comes with Dragon Rod, the weapon suited for his combat style based on Chinese martial arts !

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
SAVERM82.05

Kamen Rider - Kamen Rider 1

  • Accessories: equality (right), flat hand (left), fixing muffler, muffler for action, pedestal

RM145.80
img
SAVERM59.70

Figure-rise Standard KAMEN RIDER EX-AID ACTION GAMER LEVEL 2

-[Kamen Rider Ex-Aid Action Gamer Level 2] has been added to Figure-rise Standard!

-Thorough reproduction of the characteristic proportions of the Exede.
-Colorful body is reproduced by color coding and seal of parts. Pursue the ease of sticking stickers with thorough part division and modeling.
-The chest imitating the controller uses clear parts.
-Detail of the gamer driver's attention. The opening and closing of the lever and the loading gimmick of the rider Gasshut are also reproduced.
-The Gasacom breaker can reproduce blade mode and hammer mode with replacement deformation.
-Comes with abundant peripheral parts including hand parts with expressions.

[Accessories]
・ Gacha Conbreaker x 1
・ Grip hand x 1 each
・ Square x 1 each side 1
・ Expression hand (right) x 1
・ Weapon weapon (right) x 1
・ Display base x 1

[Item content]
・ Molded articles x 8
・ Foil seal x 1
・ Kainus seal x 1
・ Instruction manual x 1

RM120.00
img
SAVERM19.30

Bandai S.H. Figuarts Shinkocchou Kamen Rider 1 (New) 50th Anniversary Ver. Figure (Kamen Rider)

Prototype image. Actual product may vary.
Copyright Ishimori Pro Toei
Full length: approx 145mm.

- In commemoration of the 50th anniversary of Kamen Rider's birth, a new coloring issue 1 has appeared!

- The coloring of the whole body has been renewed in the image of the new Kamen Rider No. 1 in recent years! Special pedestal parts with a logo commemorating the 50th anniversary of birth are also included!

- In the special year of the 50th anniversary of Kamen Rider's birth, the new Kamen Rider No. 1 has appeared with a new coloring that imaged the appearance of recent years.
-Reproduce the glossy metallic green head and brightly colored bust parts that are characteristic of recent appearances!
-Proportions, modeling and movement are the same specifications as [SHFiguarts (true bone carving method) Kamen Rider New No. 1].
-Comes with a pedestal with a logo design to commemorate the 50th anniversary of Kamen Rider's birth!

[set content]
? Main body
? 4 types of left and right wrists for body replacement
? Replacement muffler parts
? Spare antenna parts
? 50th anniversary pedestal parts

RM400.00
img
SAVERM59.70

[Kamen Rider] Figure-rise Standard Masked Rider Fourze Basestates

  • From Kamen Rider Fourze comes a Forze that has been accurately reproduced in every detail!
  •  It is possible to reproduce special moves and characteristic poses in the play with a wide range of motion.
  •  White and black parts use different molding materials to express the difference in texture between suits and masks.
  •  Reproduce the difference in texture between a glossy head and a suit that suppresses the glossiness by making full use of different molding materials. By adopting an extra finish, the texture of the silver part is thoroughly pursued.
  •  A shading mold is used to reproduce the black lines on the body.
  •  6 types of switches can be attached and detached.
  •  Includes rocket and drill modules and various hand parts that are indispensable for reproducing special moves.

[Accessories]
  •  Rocket module x 1
  •  Drill module x 1
  •  Switch parts x 6 types
  •  Wrist parts Belt grip grip hand (right), grip hand (left and right), flat hand (left and right)
  •  Figure-rise Effect pedestal x 1
  •  Foil seal x 1
  •  Realistic decal x 1

RM132.00
img
SAVERM66.20

[Kamen Rider] Figure-rise Standard Kamen Rider OOO Tatoba Combo

  • Kamen Rider OOO is now available as the 14th installment of the Heisei Rider plastic model project HEISEI RIDER PROJECT Beginning!
  • Equipped with the biggest feature of the combo change gimmick.
  • The chest crest, which is difficult to color-code by parts, is reproduced with painted parts by tampo printing.
  • You can reproduce the image in the play with a full range of accessories such as tiger claws, medaja rivers, and grasshopper legs.
  • Three cell medals that can be attached to the Medaja River are included.

[Accessories]
  • Medaja River x 1
  • Core medal (hawk, tiger, grasshopper) x 1 each
  • Cell medal x 3
  • Traclaw (deployed state) x 1
  • Batter leg (deployed state) x 1
  • Auscanner x 1
  • Cell medal effect x 4 types
  • Wrist parts Grip hand (left and right), flat hand (left and right), medal handle (left and right), medajar river handle (left and right), autoscan hand (right)
  • Figure-rise Effect pedestal x 1
  • foil seal x 1

RM143.50
img
SAVERM65.60

[Kamen Rider] Figure-rise Standard Trychaser 2000

-[Trichaser 2000] with Kamen Rider Kuuga is now available in Figure-rise Standard!

--Thorough pursuit of the texture of a motorcycle, such as matte plating that creates a metallic feel, the adoption of springs, and precision molding.
??Details such as cable expression by lead wire and tire tread pattern are also expressed.
-In addition to the rotational movement of the front and rear wheels, the suspension of the motorcycle is reproduced by mounting a spring on the swing arm. -Comes with an initial control panel that can be attached to the center of the handle.
-The grip for the handle can also be equipped with the attached tri-accelerator.
??The dedicated pedestal allows you to display while riding. By using the side stand, the bike can stand on its own.
--The boarding action can be reproduced by combining it with the separately sold [Figure-rise Standard Kamen Rider Kuuga Mighty Form].

[accessories]
- Control panel x 1
- Tri -Axela- x 1
- Grips for handles (left and right)
- Dedicated pedestal x 1
- Rear suspension spring x 1
- Lead wire x 1
- Marking sticker x 1
- Foil seal x 1

RM150.00

Showing 1 - 30 of 58 products