• Home
  • Showing Gundam Model Kits + HIGH GRADE (HG) 1/144 product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + HIGH GRADE (HG) 1/144 product(s)

Showing 1 - 30 of 1092 products

Quick View
img
SAVERM91.90

HGUC 1/144 RX-93 Nu Gundam (Metallic Coating Ver.)

  • Metallic coating Ver with feeling of luxury and weight feeling . 
  • New hyper bazooka that 6, fin funnel × beam rifle, and 2 and beam saber × is shielded. 10 molded piece × foil seal, and marking seal.
When Bandai finally offered the RX-93 Nu Gundam as an HGUC kit, it wowed people with its superb quality. Now this sharply detailed kit is back, this time in a Metallic Coating Version! Amuro Ray's last piloted Mobile Suit in "Char's Counterattack" features polycap-jointed articulation and is fully equipped with two types of beam sabers, a beam rifle, a new hyper bazooka, and of course its distinctive fin funnels, which are detachable from its back and can be set in firing mode. Stickers are provided to add detail to the completed model.

RM208.00
RM208.00 Add to cart
Quick View
img
SAVERM131.90

HGUC 1/144 Sazabi (Metallic Coating Ver.)

Accessories: 6, funnel × beam shot rifle, 2, beam saber × beam Tomahawk, and shield

RM198.00
RM198.00 Add to cart
Quick View
img
SAVERM75.90

[099] HGUC 1/144 NZ-666 Kshatriya

A large mobile suit that features invidually deployable funnels. Massive wing binders are individually articulated and have their own locking tabs for weight balance. Approximately the size of 1/100 kits.


Accessories: 
- funnel × 6 (separation)
- beam saber (grip independent) × 2

RM172.00
RM172.00 Add to cart
Quick View
img
SAVERM52.90

[093] HGUC 1/144 FA-93 Nu Gundam HWS

The Nu Gundam Heavy Weapons System, from the CCA-MSV series of alternate versions of Mobile Suits from the film 'Mobile Suit Gundam: Char's Counterattack', joins the HGUC lineup. Heavy Weapons System includes: additional armor for the Nu Gundam (chest, front and rear skirts, and large leg thruster units), a Hyper Mega Rifle, and a large shield with rocket launchers. Missile pod units on the chest armor pivot up and down. Fin Funnel unit can be disassembled into individual folding plates. Heavy Weapon System can be removed for display as a standard Nu Gundam. It includes Hyper Mega Rifle, large shield, beam rifle, Hyper Bazooka, normal shield, 2 beam sabers, and 6 Fin-Funnel plates.


According to wikipedia
The FA-93HWS ν Gundam Heavy Weapons System Type is a mobile suit featured in the original design series Char's Counterattack: Mobile Suit Variations.

Anaheim Electronics planned to improve the newtype use RX-93 ν Gundam by equipping it with the F.S.W.S (Full-armor System and Weapon System), which included removable chobham armor to increase its protection and includes two shoulder missile pods that flank either side of the head. The ν Gundam's shield also replaced by a larger shield with built-in thrusters, to counter the Heavy Weapon System's increased mass. The heavy beam rifle also increased the firepower of ν Gundam. However, the Heavy Weapon System plan was never completed due to ν Gundam's rushed deployment and eventual MIA status. It should be noted that the missile launcher components of the Full Armor are improved versions of the ZZ Gundam's missile launchers.

Weapons: 
  • 60mm Vulcan gun
  • Beam saber
  • Large beam saber
  • Beam rifle
  • Hyper bazooka
  • Hyper Mega Rifle - A beam rifle said to possess a power rating high enough to destroy anything at maximum output, it is the most powerful beam-type weapon of the suit. This weapon also supported ultra-long-range sniping and featured a bipod for precision firing. A sensor built into the rifle adjusts the power output according to the target's distance, and could be manually controlled via the mobile suit's psycoframe system. Its power output rivaled that of the main cannons of UC battleships. To improve accuracy, it was partly controlled by newtype psycommu waves.
  • High Mega Shield (Armor) - A variation of the RX-93's shield, it is thicker for solid-weapon endurance and can equip a ballistic missile launcher that detonates with enough destructive power to erase a number of suits when it makes contact with any surface. Due to its slow movement speed it is preferable to use it at point-blank range to inflict enormous damage without missing the target. Other than that, the shield has two fixed beam cannons, with power output rivaling that of the ZZ Gundam's High Mega Cannon.
  • Beam cannon
  • Missle launcher
  • Small missle
  • Shoulder Missile Launchers - An improved version of the multi use launchers that were widely used in the Gryps Conflict, the Missile Launchers mounted on the shoulders of the H.W.S. can use a wide variety of munitions, which included the Psycommu Grenade. Apparently, it is linked to the later development of a weapon called the "Funnel Missile".
  • Fin Funnels - Considered one of the most deadly weapons in UC history, the funnels were individual remote weapons that could fly off and attack from receiving the psycommu waves of the pilot. Fin funnels were funnels equipped with their own generator, which greatly increased their capabilities. They needed less frequent charging, and were able to generate a fin funnel barrier, a defensive field, around friendly units.

RM115.00
RM115.00 Add to cart
Quick View
img
SAVERM37.90

[054] HGUC 1/144 Asshimar

The best thing about this disturbingly orange and green mecha is the fact that when it"e;s completed, it can transform from Mobile Suit mode to Mobile Armour mode. A custom display stand for showing it off is included as well. All parts snap together and are molded in colour; polycaps ensure smooth-moving joints. Foil stickers for details are included.

RM82.00
RM82.00 Add to cart
Quick View
img
SAVERM12.90

[007] HGUC 1/144 RX-75 Guntank

Driven by the pudgy Hayato, and almost as regular a fixture in the original anime as Amuro and the Gundam, the Guntank has languished for years with only a sub-par kit to represent it. Bandai has now corrected this injustice with a top-quality HG rendering of this long-time favorite! Tracks are made of flexible, easy to assemble plastic strips, but they don't move on the completed kit. Arms, back cannons and cockpit/head are posable. Molded in the final colors and featuring snap-fit assembly.


Item Size/Weight : 25.5 x 19 x 5.5 cm / 218g

RM35.00
RM35.00 Add to cart
Quick View
img
SAVERM31.90

[025] HGUC 1/144 RX-78GP03S Gundam Stamen

Mecha OverviewThe third of these new prototypes to be produced by Anaheim was the RX-78GP03 Gundam, code-named "Dendrobium." The Dendrobium Stamen is the core component of the incredible weapons system known as the Gundam GP03. Designed to operate in conjunction with the armed base Orchis, the Stamen is equipped with tail binders to lock it in position, and its forearms unfold into special manipulator claws which are used to grab weapons from the Orchis's weapon containers. The Stamen was, for the most part, a standard type of mobile suit, although it did incoporate some differences from other "normal" Gundam prototypes. Instead of the costly Core Block System, the cockpit was of the panoramic cockpit display originally tested in the Gundam Alex. The usual head vulcan guns were absent, replaced by an advanced sensor and avionics package. The backpack was composed of a "docking binder" system to link up with and control the Orchis mobile weapon component. The arms also each incorporated a large, folding manipulator arm, which was used to retrieve the Stamen's own weapons from their storage racks in the Orchis' weapons container pods. The GP03S Stamen was completed at Anaheim's Von Braun City factory and delivered to their La Vie En Rose research dockship, where the Orchis component had also been completed. The only thing left to make the GP03 field-ready was piloting and combat data. On November 11, the mobile assault carrier Albion arrives at La Vie En Rose, and its crew commandeer the Gundam GP03 as a replacement for the destroyed GP01. Over the next two days, pilot Kou Uraki repeatedly takes this experimental superweapon into battle against the Delaz Fleet. Both the Stamen and Orchis components appear to survive the conflict intact, but their final disposition is unknown, and all records of them are erased in March of the following year.Source:angelfire.com

RM64.00
RM64.00 Add to cart
Quick View
img
SAVERM28.90

[R09] HG 1/144 Forbidden Gundam

- Completely redesigned HG SEED Gundam series! - If SEED is reproduced in action pose! Joint Action Base 2 comes with new parts support. Excluding some kit. - Comes with stickers for marking up a new dress! - Redesigned the packaging design! - Redesigned with a new color molding!

RM60.00
RM60.00 Add to cart
Quick View
img
SAVERM17.90

[064] HGUC 1/144 MS-05B Zaku I

  • Reproducible shoulder tackle.
  • Bazooka armed rack, Zakubazuka, Zaku machine gun, shield, Shutsurumu file
  • Usuto supplied, the Heat Hawk. Zakubazuka can be attached to the rear armor.
  • Mono movable by moving the lever on the back of the head.
  • The pursuit of the detail comes with a wrist.
  • The double elbow joints, expanding the range of movement

RM42.00
RM42.00 Add to cart
Quick View
img
SAVERM41.90

[083] HGUC 1/144 MSN-03 Jagd Doga (Gunneys Guss Use)

  • Comes with a funnel effect in part, to reproduce conditions in space injection funnel. 
  • Detachable funnel in standby state, expanded state, a reproduction of a replacement. 
  • Mono moving head from side to side. Shoulder swing mechanism is adopted. 
  • Vernier Apojimota, give accurate details of the internal mechanism and so on. 
  • Supplied weapons, beam rifle, shield, and saber.

RM90.00
RM90.00 Add to cart
Quick View
img
SAVERM23.90

[058] HGUC 1/144 RX-110 Gabthley

Item Size/Weight : 31 x 19 x 7.5 cm / 367g

RM72.00
RM72.00 Add to cart
Quick View
img
SAVERM51.90

[148] HGUC 1/144 Gundam Delta Kai

  • Accessories: 
  • Long Mega Buster, shield, high-Mega Cannon, proto fin funnel x 2, Beam saber x 2, saber grip (left and right), fist (left and right), rifle grip (right). 
 
According to wikipedia 
The MSN-001X Gundam Delta Kai (pronounced 'Kai') (aka ? Kai or ??) is a prototype transformable mobile suit developed from the MSN-001 Delta Gundam as a technology demonstrator. It appears in the PlayStation 3 video game Mobile Suit Gundam UC (The Postwar) and UC-MSV. In overall appearance, the Gundam Delta Kai is an enhanced version of the Delta Gundam, which incorporates new technologies that can be used for future mobile suits. It also has a specialized Psycommu system installed called the Nitro System, which grants an ordinary pilot Newtype abilities. The Gundam Delta Kai is also armed with standard vulcan guns, a long mega buster, two beam sabers and a shield. But also equipped with two fin funnels on its back.
 
Weapons 
  • Vulcan gun: The vulcan gun has been a standard armament of Federation suits since the One Year War. While not very powerful and typically unable to penetrate mobile suit armor, the vulcan gun is useful in intercepting missiles/rockets, destroying mobile suit sensors, and engaging lightly-armored targets such as tanks and small aircraft. 
  •  Long Mega Buster: A specialized Beam Rifle with a power output comparable to a beam cannon. It was developed from the RX-78-4 Gundam Unit 4 "G04"'s Long Beam Cannon. 
  • Beam Saber: The Delta Gundam Kai's close combat armaments. It is able to melt through most armor and destroy most mobile suits in one strike. 
  • Shield: The Delta Gundam Kai's defensive armament. It doubles as the unit's forward section in waverider mode. 
  • Fin Funnels: The Delta Kai mounts two Proto Fin Funnels on its back.

RM104.00
RM104.00 Add to cart
Quick View
img
SAVERM43.90

[086] HGUC 1/144 RX-93 Nu Gundam

  • Item Size/Weight : 31 x 20 x 9.3 cm
  • Weight: 552g
  • Accessories: beam rifle, shield, New Hyper Bazooka, Beam Saber
  • Comes with installation manual + snap & fit.
Similar Nu Gundam Modelling kit you may found on our website:

RM105.00
RM105.00 Add to cart
Quick View
img
SAVERM19.96

[191] HG REVIVE 1/144 RX-78-2 Gundam

  • Adopting the latest format, both easy assembly and high mobility are realized. 
  • Similar parts amount, but the number of movable joints increased 150%, compared to "HGUC RX-78-2 Gundam" launched in 2001. 
  • The range of mobility is greatly improved as well as the number of movable joints is increased. 
  • Powerful poses seen in the anime can be recreated. 
  • Parts are located on the runners under consideration to maximize "easy-assembly". 
  • Kusabi (wedge) Gate" is adopted to the runners to minimize gate marks. 
  • The double-jointed elbows and knees enable the MS to kneel down on one knee, and unsheathe the Beam Saber. 
  • Both vertical and horizontal movement in the waist. 
  • A Beam Rifle, two Beam Sabers, and a Hyper Bazooka (mounts on the waist) are included. 
  • Weapon-wielding hands and open hands (both left and right) are included to recreate various poses. 
  • Runner x5, Foil sticker x1, Instruction manual x1

RM40.00
RM40.00 Add to cart
Quick View
img
SAVERM15.90

[008] HGUC 1/144 MSM-03 Gogg

An aquatic mobile suit used by Zeon from Mobile Suit Gundam with its trade mark sharp claws. Arms can detach to recreate appearance while cruising through the ocean waters.

RM32.00
RM32.00 Add to cart
Quick View
img
SAVERM10.90

[019] HGUC 1/144 MSM-07S Char's Z'Gok

  • HG version of the MSM-07S. This is the specially modified version as piloted by Char. 
  • Molded in Bandai's patented multi-gate technology which allows multiple colors on one tree. 
  • Painting is not required. 
  • Posable via multi-segmented arms and legs. 
  • Claws are moveable. 
  • The thrusters on back can also be moved.

RM30.00
RM30.00 Add to cart
Quick View
img
SAVERM39.90

[022] HGUC 1/144 MSN-02 Zeong

This plastic model kit of the big mech has moveable everything, including the fingers! The thruster assemblies pivot. Head detaches, and hands detach and can be mounted on bendable cables (included). As usual the parts are pre-colored and snap together. While paint is not required for this model, it certainly would add a realistic appearance to the final product. Instructions are in Japanese but extremely well illustrated so anyone can follow them.


RM68.00
RM68.00 Add to cart
Quick View
img
SAVERM18.90

[055] HGUC 1/144 RMS-106 Hi-Zack (E.F.S.F. Color)

Item Size/Weight : 29 x 19 x 6.2 cm / 254g

RM41.00
RM41.00 Add to cart
Quick View
img
SAVERM31.90

[076] HGUC 1/144 MS-14A Gelgoog / MS-14C Gelgoog Cannon

[076] HGUC 1/144 MS-14A Gelgoog / MS-14C Gelgoog Cannon


Grade : HG
Scale : 1/144

RM64.00
RM64.00 Add to cart
Quick View
img
SAVERM41.90

[084]HGUC 1/144 Jagd Doga (Quess Ea Use)

[084]HGUC 1/144  Jagd Doga (Quess Ea Use)

RM90.00
RM90.00 Add to cart
Quick View
img
SAVERM21.90

[167] HGUC 1/144 Gundam F91

  • Accessories: beam rifle, beam launcher, Vu~esuba x 2, beam saber x 2, Beam shield, saber for handle (left and right), Rifle handle (left and right)

RM50.00
RM50.00 Add to cart
Quick View
img
SAVERM41.70

[170] HGUC 1/144 Silver Bullet

  • Mobile Suit Gundam Unicorn’s Doven Wolf-inspired Silver Bullet joins the HGUC lineup! 
  • Appearing in Mobile Suit Gundam Unicorn Bande Dessinee, the Silver Bullet is adapted from the powerful Doven Wolf. A more powerful Suit than its predecessor, the Silver Bullet features a variety of gimmicks to add to the build experience of this kit. 
  • Faceplate can be changed out to feature either the GM-style or Gundam-style head! 
  • Backpack is equipped with Beam Cannon deployment gimmick 
  • Large missile can be mounted on the Suit.
  • Missile launcher hatch can be closed or opened.
  • Suit equipped with INCOM storage gimmick.
  • INCOM Wire effects and Stand included for dynamic action poses! 
  • Shield features telescoping gimmick.
  • Accessories: Rifle, Shield, Large Anti-Ship Missile x2, Beam Saber x2, INCOM x2,
  • INCOM Stand x2, Manipulator x5, Faceplate x2 (Gundam Style, GM Style)

RM90.20
RM90.20 Add to cart
Quick View
img
SAVERM21.95

[190] HG REVIVE 1/144 Guncannon

  • Through the time 35 years, and sends to all Gundam fans! HG is `Shinsei -REVIVE-`

  • Respond to a number of requests, REVIVE START! HGUC cancer Cannon appeared in the latest format!

  • REVIVE1: characteristic proportions
    By with the curve of was released HGUC series first series the gun Cannon] Shinsei `-REVIVE-` sharp in May 1999, the expression characteristic and massive proportions.

  • REVIVE2: can be bold poses
    You can expand the range of movement, elbow, in addition to knee is in double joint, and forward bending of the waist, also, such as heel angle adjustment realized. Anime Geki-chu can be just like the poses.

  • REVIVE3: the ease of set and pursue
    Parts adopt the cut easy wedge gate from the runner. Further consolidate parts for each part, by a runner arranged more easily assembled design.

  • REVIVE4: also included parts enhance
    Other beam rifle of the main equipment, comes with the open hand to be able to fire posture at low attitude (upward) parts.
Accessories: 240mm low recoil Cannon × set, beam rifle, grip hand (left and right), upward smack (left and right)

RM50.00
RM50.00 Add to cart
Quick View
img
SAVERM11.98

[023] HGBC 1/144 Giant Gatling Support Weapon

Gundam HG Build Custom HGBC #023 Giant Gatling Build Fighters Support Weapon 1/144 Model Kit

Different gatling gun types can be made through the use of various attachments and also includes grips that allow use by 1/100 models!
Runner x2, Instruction Manual
Approx. 4.75" long

RM24.00
RM24.00 Add to cart
Quick View
img
SAVERM27.94

[194] HG REVIVE 1/144 Gundam MK-II (Titans) (HGUC)

  • The fifth HG REVIVE release is the Titans' black Gundam Mk-II from Mobile Suit Zeta Gundam! 
  • Just as posable as the AEUG version, this Titans release features parts and decals in their color scheme. 
  • Te-tron stickers for unit number markings 1-3 are also included.

RM62.00
RM62.00 Add to cart
Quick View
img
SAVERM21.95

[010] HGIBO 1/144 Hyakuren (Amida Custom)

  • Innovative proportions buzz! The kit variations machine of well-trained!
  • Other proportions reproduce the unique airframe design, distinctive coloring of Amida machine also reproduced in the molded color and seal.
  • Assault rifle (provisional) appeared as a new armed parts for Amida machine! Other, which is a standard armed rifle (provisional), blade (provisional) is also included!
  • Accessories: Assault rifle (provisional), rifle (provisional), blade (provisional)

RM50.00
RM50.00 Add to cart
Quick View
img
SAVERM29.90

[196] HG REVIVE 1/144 Gouf

  • REVIVE 7th is [Mobile Suit Gundam] than `blue giant star` love machine Gouf the line-up of!
  • FUN TO BUILD
  • `Adopt a wedge gate`. Easily removed from the runner, since the gate mark is hard to rest, clean finish!
  • BEST PROPOTION
  • REVIVE the Gouf contemporary proportions! Can reproduce a wide variety of action poses a wide range of motion.
  • OPTION
  • The main armament of Gouf also abundantly included!
  • Heat rod can be bent freely, a variety of poses is to be able to!
  • Heat saber can be stored in the shield.
  • Accessories: shield, heat rod, heat saber (left and right), grip hand (left and right), Weapons Possession (left and right), 75mm machine gun smack

RM60.00
RM60.00 Add to cart
Quick View
img
SAVERM21.90

[032] HGIBO 1/144 Rouei

  •  Is finally kit [Mokage] of Tabinzu!
  • Accessories: heavy club, handgun

RM50.00
RM50.00 Add to cart
Quick View
img
SAVERM17.90

[030] HGIBO 1/144 Hekija

HGIBO 1/144 Hekija

RM42.00
RM42.00 Add to cart
Quick View
img
SAVERM17.90

[17] HGPG 1/144 Petitgguy Charagguy Fumina

Fumina has adorably transformed into a CHARAGGUY in the super popular PETIT’GGUY series! â– Her cute ponytail has been recreated and you can rearrange her into a Fumina-colored PETIT’GGUY, too! 

Accessories:
- Fuminaheddo × 1
- Display pedestal × 1
- Joint parts × 1

RM36.00
RM36.00 Add to cart
High Grade (HG) are the most commonly built kits on this list. They are easy to build, their price point is affordable, and there is a wide variety of HG kits to choose from. These kits can easily be spotted by the HG moniker found on the corner of the front box art. These kits have more articulation than SD units, which gives it more options for poses. They are 1/144 scale make them the perfect size for collecting and displaying.

In our previous blog, we mentioned that HG kits is our recommended grade for beginners. This is because they offer a great experience without having to break the bank. As you progress and become a better builder, HG kits become fantastic test subject to practice weathering and painting techniques.

Showing 1 - 30 of 1092 products