Price Clear







MS GUNDAM F90 / F91

Showing 1 - 30 of 49 products

img
SAVERM98.90

MG 1/100 Crossbone X-1 Full Cloth

  • Following the Suit's original designs, the shoulder cape and large range of motion allow this kit to fit into accurate poses and feature dynamic action! 
  • Huge weapons split into individual elements!
  • Accessories: Buster Gun x1, Scissor Anchor Cable x2, Scissor Anchor Chain x2, Beam Saber x2, Heat Dagger x2, Beam Shield x1, Brand Marker x2, Beam Zanber x1, Hi-Murasama Blaster x1, Peacock Smasher x1

RM170.00
RM170.00 Add to cart
img
SAVERM77.90

MG 1/100 XM-X1 Crossbone Gundam X-1 Ver.Ka

  • Product: XM-X1 Cross Bone Gunda, X-1 Ver.Ka
  •  Mobile Suit Crossbone Gundam (機動戦士クロスボーン・ガンダム Kidou Senshi Kurosubōn Gandamu) is a manga set in the Gundam Universal Century. It was written & illustrated by Yuichi Hasegawa. It takes place in UC 0133, ten years after the events of Mobile Suit Gundam F91. It is a direct sequel to the movie as well.
  • In the face mask is equipped with a mechanism that slides upward from the normal form.
  • Comes with a variety of weapon equipped.

RM132.00
RM132.00 Add to cart
img
SAVERM39.90

[187] HGUC 1/144 Crossbone Gundam X1

  • The long-awaited Crossbone Gundam X-1 finally joins the 1/144-scale HGUC series! 
  • Rocketing out of the manga Mobile Suit Crossbone Gundam, protagonist Suit Crossbone X-1 is incarnated as an HGUC kit! Adopting the high standards found in the All Gundam project, the X-1 features accurate proportions and colors, tons of weapons, easy assembly, and a wide variety of movement.
  • Facial vents reproduced with extra parts.
  • X thrusters attach to the rear of the body to form the high-powered core fighter.
  • Zan Saber and Buster Gun combine to form Zanbuster weapon! 
  • Accessories: Buster Gun x1, Zan Saber x1, Brand Marker x2, Heat Dagger x2, Heat Dagger (Soles) x2, Beam Shield, Beam Saber x2, Core Fighter Body x1

RM68.00
img
SAVERM25.90

[167] HGUC 1/144 Gundam F91

  • Accessories: beam rifle, beam launcher, Vu~esuba x 2, beam saber x 2, Beam shield, saber for handle (left and right), Rifle handle (left and right)

RM46.00
img
SAVERM17.60

[02] SD GUNDAM CROSS SILHOUETTE CROSSBONE GUNDAM X1

- CS frame is excluded and have to purchase separately. 

SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. Introduced in June 2018, this series features inner frame technology, similar to Real Grade and Master Grade kits but on a smaller scale. Each kit's parts can be attached to either an 8.5 cm "SD" Frame, which features proportions inspired by Super Gachapon World: SD Gundam X, or a taller 9.5 cm "CS" frame with proportions inspired by SD Gundam G Generation Genesis.

RM30.40
img
SAVERM57.80

[031] RG 1/144 Crossbone Gundam X1

RG 1/144 Crossbone Gundam X1 

The Real Grade Crossbone Gundam launches in May! This kit is a part of the GUNDAM EVOLUTION PROJECT which offers "extreme details" that features extended articulation for the RG framing and additional exploration to its part separation!

More images and info will be added later.

[ACCESSORIES]

  • Anti beam cloak
  • Beam Zanber
  • Core Fighter
  • Buster Gun
  • Beam Shield / Brand Marker

RM92.00
img
SAVERM140.00

P-Bandai: MG 1/100 Gundam F90


P-Bandai: MG 1/100 Gundam F90

Premium Bandai announces the release of the Gundam F90 in August for its initial release! The kit has an entirely new mold that offers great range of articulation and quality! The kit also has good selections of extension parts that will be released as Premium Bandai kits as well.

The first equipment set of extension part which is the "Mission Pack Type E and S set"  that is also going to be released in August. More extension packs will be announced on later date. Bandai Spirits also wants to release more Gundam F90 - F91 kit series this year, so stay tuned for more info!

[ACCESSORIES]
  • Beam Rifle
  • Shield
  • Beam Saber

RM240.00
RM240.00 Add to cart
img
SAVERM40.00

P-Bandai: MG 1/100 Gundam F90 Mission Pack B-Type & K-Type


The Gundam F90 mission A ~ Z project continues! This time, Bandai Spirits announces the B-Type (Bombard) and K-Type (Keep) extension equipment for the Master Grade Gundam F90!

The mission packs are both packed in one kit and the Gundam F90 unit remains to be sold separately.

BOMBARD UNIT
A mission pack that is newly drawn and planned by Mr. Kunio Okawara for the Gundam F90 A to Z project.
Equipped with heavy bombardment unit on its shoulders and legs in addition to its backpack cannons.
A large volume of heavy weapon installed for its whole body enables the Gundam F90 deliver long range attacks in any direction.

ARM GRENADE LAUNCHER: In addition to its missile launchers, this unit also has grenade launchers attached to both of its arms.

SHOULDER / LEG MISSILE CONTAINER: The missiles are stored safely in its missile containers that are attached to its legs and shoulders. Missile storage is equipped with a hatch deployment gimmick for added presentation.

ENDURANCE (KEEP) UNIT
Just like the B type equipment, this pack was also newly drawn and planned by Mr. Kunio Okawara for the A to Z project.

PROTOTYPE MEGA BEAM SHIELD: The beam shield protects the unit from any attacks in any direction. It is activated by the generators attached to its waist. 
I FIELD GENERATOR: While the I-field generators are usually equipped by larger mobile suits, the Gundam F90 can handle its strength! It is also just enough to deflect any enemy mega particle beams coming from any directions. Both shoulders armors possesses 3 I-field generators.

MG 1/100 GUNDAM F90 (SOLD SEPARATELY)

RM140.00
RM140.00 Add to cart
img
SAVERM60.00

P-Bandai: Mission Pack E type & S type for MG 1/100 Gundam F90

P-Bandai: Mission Pack E type & S type for MG 1/100 Gundam F90

Premium Bandai announces the release of the "Project A-Z" for the P-Bandai MG 1/100 Gundam F90 kit, they started with the E and S type mission pack and it's looking very promising!

The project also showcases a mission pack simulator where you can see what changes on the variant and what to install on the kit if you want to do versions of the kit. 

This set comes with entirely new and never before seen mold of E and S type mission packs.

Type S [Support] accessories

  • Long Distance Beam Gun "Mega Beam Cannon"
  • 4-beam Beam Cannon and 2-missile Missile pod
  • Cruising Missiles
  • Support Jack

Type E [Electronic] accessories

  • Radome
  • Directional Jamming Rifle
  • Electronic warfare equipment for the shoulders and back waist
*MG GUNDAM F90 SOLD SEPARATELY

RM120.00
RM120.00 Add to cart
img
SAVERM145.00

P-Bandai: RE/100 Vigna-Zirah

P-Bandai: RE/100 Vigna-Zirah

Vigna-Zirah enters the Ace Pilot Log in its REBORN-ONE HUNDRED model kit series! The kit offers variety of newly molded parts including its unique signature VSBR backpack that helps the MS improve its mobility and firepower ability!

[ACCESSORIES]
Beam Rifle
Beam Shield
Beam Saber
V.S.B.R.
Gundam face type

RM235.00
RM235.00 Add to cart
img
SAVERM111.60

P-Bandai: MG 1/100 Gundam F90 Mission Pack O and U Expansion Set

  • P-Bandai: MG 1/100 Gundam F90 Mission Pack O and U Expansion Set
  • Release Date: October 2020
  • Arrival Date: November 2020
  • MG 1/100 Gundam F90 model kits sold SEPARATELY
  • The Mobile Suit Gundam F90 A~Z project continues with the mission packs O (Officer) and U (Uplift)! These are expansion packs for the sold separately MG 1/100 Gundam F90. The kit is provided with entirely new molded parts for both mission packs.
  • The kit also comes with water slide decals for detailing!

RM140.00
RM140.00 Add to cart
img
SAVERM54.40

HG 1/100 Gundam F-90

  • The first mobile suit of the Strategic Naval Research Institute's "Formula Project." The F90 Gundam F90 was a downscaled mobile suit, standing at only 14.8 meters compared to the RX-78-2 Gundam, which stood at 18 meters. 
  • Item Size/Weight : 37 x 23.7 x 8.2 cm / 582g

RM94.50
img
SAVERM19.90

[001] HG 1/100 RGM-111 Hardygun

The RGM-111 Hardygun is a mobile suit developed by Anaheim Electronics as part of its "Silhouette Formula Project". The suit appears in the manga series Mobile Suit Gundam F91 Silhouette Formula.
  • Series: Mobile Suit Gundam Silhouette Formula 91
  • NG 1/100 Scale

RM40.00
img
SAVERM17.70

[003] HG 1/100 Den'an-Zon

The Den'an Zon, developed and produced by the Crossbone Vanguard, is lighter and had a greater performance than any Federation mobile suits produced in UC 117, the year the Den'an Zon was first produced, or in the year UC 123 when the war between the Federation and the Crossbone Vanguard began.

RM30.20
img
SAVERM13.20

[004] HG 1/100 Guntank R-44

An early miniature transformable mobile suit developed by Anaheim Electronics, the RXR-44 (F-50D) Guntank R-44 was based on an older transforming artillery mobile suit, the D-50C Loto, a special operations mobile suit created in UC 0096.

RM22.70
img
SAVERM22.10

[006] HG 1/100 Beruga Giros

Designed and produced in UC 0123, the XM-05 Berga Giros is an upgraded version of the XM-04 Berga Dalas. By specification the Berga Giros is 0.1 meters shorter and 0.2 metric tons lighter than the Berga Dalas. Also, the output of the ultracompact fusion reactor has been increased to 4790 kW, which is 540 kW greater than even the Federation's advanced F91 Gundam F91.

RM37.80
img
SAVERM17.70

[008] HG 1/100 Heavygun

The RGM-109 Heavygun represents the Federation's age of peace. It is smaller than previous general purpose mobile suits, lightly armed, and could be more cheaply produced than older mobile suit models.

RM30.20
img
SAVERM17.70

[007] HG 1/100 Dahgi-Iris

The XM-06 Dahgi Iris is used by leaders of the Crossbone Vanguard's reconnaissance teams, and regularly lead a team of XM-03 Ebirhu-S. As it is created for information gathering, multiple cameras and precision sensors, notably the newly developed 'Doppler Radar', are placed throughout its body. 

RM30.20
img
SAVERM33.80

[005] HG 1/100 RX-99 Neo Gundam

The RX-99 Neo Gundam (aka AFX-9000 Neo Gundam, AFX being an abbreviation of ANAHEIM Formula Experiment) is a mobile suit which appears in the manga series Mobile Suit Gundam Silhouette Formula 91 in UC 0123.

RM68.00
img
SAVERM26.50

[007] HG 1/100 Cluster Gundam

The F90III-Y Cluster Gundam was a trial production unit and the third unit in the Formula 90 series built by the Earth Federation Forces' Strategic Naval Research Institute. A radical departure from the previous F90 units was the fact the Cluster Gundam incorporated a Core Block System that functioned as its cockpit and backpack, so the pilot -  €™s rate of survival is greatly increased. 

RM45.40
img
SAVERM17.70

[001] HG 1/100 Mobile Suit F71 G Cannon

G-Cannon was based on the designs of the F70 Cannon Gundam by SNRI. G-Cannon inherits the ability to remove the back-mounted machine cannons and function as a close combat mobile suit, but its overall performance is still inferior to Cannon Gundam.

RM30.20
img
SAVERM31.00

[002] HG /100 Gundam RXF91

The RXF-91 Silhouette Gundam is an advanced mobile suit that is based on stolen data from the Strategic Naval Research Institute's Formula Project. Because it uses stolen data the RXF-91 Silhouette Gundam is in many ways identical to the F91 Gundam F91 that SNRI was still developing. The suits were not completely identical, possessing different exterior frame designs.

RM52.90
img
SAVERM39.80

[006] HG 1/100 Gundam RXF91A Kai

The RXF-91A Silhouette Gundam Kai is a mobile suit that appears in the manga/model kit series Mobile Suit Gundam Silhouette Formula 91 in UC 0123.

RM68.00
img
SAVERM19.90

[004] HG 1/100 G Cannon Magna

The G-Cannon Magna is a mobile suit developed by Anaheim Electronics as part of its "Silhouette Formula Project". The suit appeared in the manga series Mobile Suit Gundam Silhouette Formula 91 in UC 0123.

RM40.00
img
SAVERM20.00

P-Bandai: MG 1/100 Gundam F91 Ver. 2.0 [Afterimage Color]

P-Bandai: MG 1/100 Gundam F91 Ver. 2.0 [Afterimage Color] 

[ACCESSORIES]

Beam Rifle
Beam Launcher
Beam Saber
Beam Shield
Display Base

Now your LED unit will make even more sense lol

RM260.00
img
SAVERM81.00

RE/100 1/100 Vigna-Ghina II

- Vigina / Gina II is three-dimensionalized from the Mobile Suit Variation [F91-MSV] of [Mobile Suit Gundam F91]

- Shapes of Gundam type heads and flexible wing nozzles are newly designed to the design which imagined the setting.
- Armors such as shot -  lancer and beam -  shield are included.

[accessories]
* Beam * saber x 2
* Shot * Lancer x 1
* Beam shield x1
* Gun handle (right) x 1
* Hirate (left and right) x 1 each

[Product content]
* Molded article x15
* Seal x1
* Marking stick x1
* Instruction manual x1


RM140.60
img
SAVERM130.00

P-Bandai: MG 1/100 Gundam F91 Ver. 2.0 [Harrison Maddin]

Release Date: Oct 2019
Estimate Delivery: Nov/Dec 2019

The Gundam F91 Ver. 2.0 returns in its Harrison Maddin colors!

[ACCESSORIES]

-Beam Rifle
-Beam Launcher
-Beam Saber
-Beam Shield 
-Display base

RM250.00
img
SAVERM100.00

P-Bandai: MG 1/100 XM-X0 Crossbone Gundam X-0 Ver. Ka


The silver Crossbone Gundam lines up with the Ver. Katoki MG kit series! Provided with new molding for certain parts, this kit surely is a nice addition to the collection.

Head
-Blade antenna is produced with entirely new mold

Chest
-Chest duct has been thoroughly reproduced with precise detailing

New forms of weapon arrives!

Butterfly Buster
-A completely new molded weapon for the X-0 model, the butterfly buster can be transformed between gun and sword modes.

Peacock
-Multi-purpose Assault Weapon "Kujaku" is also provided with transformation gimmick, it can be transformed into different modes - Smasher and Buster.

Newly designed "Ver.Ka" marking decals is included in the kit!


[ACCESSORIES]
-Butterfly Buster x 2
-Peacock
-Scissor Anchor x 2
-Heat Dagger x 2
-Beam Saber x 2
-Brand Marker x 2
-ABC Cloak

RM280.00
img
SAVERM70.00

P-Bandai: RG 1/144 Crossbone Gundam X-2

P-Bandai: RG 1/144 Crossbone Gundam X-2

[ACCESSORIES]

  • Shot Lancer
  • Anti beam cloak
  • Beam Zanber
  • Beam Saber x 2
  • Core Fighter
  • Buster Gun
  • Beam Shield
  • Brand Marker x 2
  • Beam Dagger x 2
  • Scissor Anchor x 2
  • Heat Dagger (soles on feet) x 2
  • Zabine Chareux 1/144 figure

The kit also comes with entirely new molded parts for its v-fin.

RM190.00
img
SAVERM99.20

P-Bandai: MG 1/100 Gundam F90II I (Intercept) Type

Reissue Date: August 2020
Estimate Delivery: September 2020

The Gundam F90II's I (Intercept) equipment pack is one of the two packs made specially for the Gundam F90II. The kit offers entirely new molds for both of its equipment and main body!

Its Long range type could already be on its way since molds are all ready for the Gundam F90II's main body!

RM380.00

Showing 1 - 30 of 49 products