• Home
  • Gundam Model Kits

PRODUCTS

Price Clear







Grade

Brand

Availability

Gundam Model Kits

img MOBILE SUIT GUNDAM

Showing 301 - 330 of 355 products

Quick View
img
SAVERM77.40

RE/100 MS-08TX [EXAM] Efreet Custom

  • The Efreet Custom, long popular in games and side stories, is finally a kit! 
  • Its charm is emphasized by the RE/100 series’ refined construction, detailed exteriors, and easy but flexible assembly. 
  • Translucent parts are used for its backpack-stowable heat saber. 
  • Its hexa-linked missile pod is mounted on a polycap-shaft joint for removability and adjustability!

RM132.30
RM132.30 Request Stock
Quick View
img
SAVERM31.90

[191] HG REVIVE 1/144 RX-78-2 Gundam

  • Adopting the latest format, both easy assembly and high mobility are realized. 
  • Similar parts amount, but the number of movable joints increased 150%, compared to "HGUC RX-78-2 Gundam" launched in 2001. 
  • The range of mobility is greatly improved as well as the number of movable joints is increased. 
  • Powerful poses seen in the anime can be recreated. 
  • Parts are located on the runners under consideration to maximize "easy-assembly". 
  • Kusabi (wedge) Gate" is adopted to the runners to minimize gate marks. 
  • The double-jointed elbows and knees enable the MS to kneel down on one knee, and unsheathe the Beam Saber. 
  • Both vertical and horizontal movement in the waist. 
  • A Beam Rifle, two Beam Sabers, and a Hyper Bazooka (mounts on the waist) are included. 
  • Weapon-wielding hands and open hands (both left and right) are included to recreate various poses. 
  • Runner x5, Foil sticker x1, Instruction manual x1

RM40.00
RM40.00 Request Stock
Quick View
img
SAVERM29.08

[LIMITED] HGUC 1/144 RX-78-2 Gundam (7-Eleven Ver.)

  • This is Bandai x 7-11 Chain Store production of special limited release of HG Gunpla.
  • This is for 7-11 collectors~
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM150.80
RM150.80 Request Stock
Quick View
img
SAVERM49.90

HGUC 1/144 GUNDAM OPERATION V SET

  • Special Edition manual and special marking seal that can dress up the three aircraft of the V strategy.
  • A Set of 3 Gundam Gun Cannon Guntank of HGUC which includes RX-78, RX-77, RX-75

RM106.00
RM106.00 Request Stock
Quick View
img
SAVERM69.86

RE/100 Gundam GP04 Gerbera


  • The distinctive Strum Boosters on the back are reproduced. 
  • Three boosters are detachable. Upper two boosters can be connected to the Saber Rack. 
  • The Landing Skid of the lower booster can be retracted or lowered with replacement parts. When lowered, the Landing Skid can be used to physically support the Gundam in a standing position. 
  • An abundance of weapons such as a Long Range Rifle, Beam Rifle and Shield are included. 
  • Runner x10, Foil sticker x1, Tetron sticker x1, Instruction manual x1

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM38.08

P-BANDAI [Premium Bandai] Crossbone Gundam X1 KAI

RM141.80
RM141.80 Request Stock
Quick View
img
SAVERM54.86

P-Bandai Exclusive: HGUC 1/144 Crossbone Gundam X2 Kai

From "Mobile Suit Crossbone Gundam", Space Pirate Crossbone Gundam X2 breaks that have been restored appeared in HGUC series!

From "Mobile Suit Crossbone Gundam", to commercialize Crossbone Gundam X2 modified with HGUC series.
Crossbone Gundam X2 breaks distinctive body shape and to reproduce the armed!

● X2 reproduce breaks specific body shape!
And head and blade antenna shape is different from the X1, the part of the back thrusters reproduced in the new shape.

-Head and blade antenna
Reproduce some form of head in the new shape.
Of angle of change shape at the top, blade antenna with features. Aspect design is also reproduced in the mold.

Hive thrusters
The shape of the thrusters tip is to have been large in size and reproduced in the new parts.

● Buster launcher included!
detail a dedicated large weapon Buster launcher of the Crossbone Gundam X2 breaks to be used is also included in the rich new shape.
Total length of about 150mm.

● scissor anchor other, rich comes armed. Weapon dedicated hand parts also enhance.

Comes armed: Buster Launcher / scissor anchor / heat Dagger / beam saber /
Than Buster (beam Zanba / Buster cancer) / brand marker / beam shield

RM155.00
RM155.00 Request Stock
Quick View
img
SAVERM29.90

[197] HG REVIVE 1/144 Gyan

  • Accessories: dedicated beam saber, dedicated shield

RM42.00
RM42.00 Request Stock
Quick View
img
SAVERM41.10

P-Bandai Exclusive: HGUC 1/144 Guncannon (21st Century Real Type)

  • HGUC Guncanon - 21st Century Real Type - P BANDAI LIMITED
  • It might be delayed if shipment hold by shipping authority.

RM108.70
RM108.70 Request Stock
Quick View
img
SAVERM20.60

P-BANDAI Exclusive: HGUC 1/144 RX-78-2 GUNDAM (21st Century Real Type)

This is P-Bandai Japan limited release item!

Kawaguchi redesign the HGUC RX-78-2 Gundam on 21st century (1980s) real type design!


Set include beam rifle, sheild, missile launcher, beam saber
This is pre-painted plastic model kits and require snap-fit assembly only.

RM99.20
RM99.20 Request Stock
Quick View
img
SAVERM34.20

P-Bandai Exclusive: RE/100 Efreet Schneid

  • P-Bandai Exclusive: RE/100 Efreet Schneid

RM217.40
RM217.40 Request Stock
Quick View
img
SAVERM140.00

[Daban] MEGA SIZE 1/48 RX-78-2 Gundam

[Daban] 1/48 RX-78-2 Gundam (MEGA SIZE)
Series: Gundam
Grade: MEGA SIZE
Manufacturer: Daban
Scale:1/48

Please note that this is not Bandai product

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM398.00

[Limited Production] PG 1/60 RX-78/C.A Casval Gundam

[Limit Production] PG 1/60 RX-78/C.A. Neo Zeon Casval's Gundam EXF Ver.


RM800.00
RM800.00 Request Stock
Quick View
img
SAVERM271.60

[Limited Production] PG 1/60 RX-78-2 Gundam (Kunio Okawara Ver.)

P-Bandai Exclusive: PG 1/60 RX-78-2 Gundam Kunio Okawara Color Ver.

RM567.00
RM567.00 Request Stock
Quick View
img
SAVERM399.00

[Limited Production] PG 1/60 RX-78-2 Gundam (Chrome Plated Ver.)

Limited Production : 1/60 (PG) RX-78-2 GUNDAM CHROME PLATE VER


To all GUNDAM FANS! 

This is Bandai's Perfect Grade 1/60 PG RX-78-2 GUNDAM (CHROME PLATED VERSION!) gunpla model kit. 

The truly amazing limited production for certain countries in Asia. One of the best designed inner frame detail even until today. Everything you ever hope for detail and possibility for this model are achieved! Several little actuators, hydraulic pistons are inclusive in the inner frame as well. 

Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For all true Gundam hobbyist, there's simply no question about whether you should order this. 

This is a LIMITED PRODUCTION kit! Don't miss this!

RM799.00
RM799.00 Request Stock
Quick View
img
SAVERM44.90

P-Bandai Exclusive: HGUC 1/144 Crossbone Gundam X3

P-Bandai Exclusive: HGUC 1/144 Crossbone X3

RM155.00
RM155.00 Request Stock
Quick View
img
SAVERM418.00

MG 1/100 Plan303E Deep Striker Gundam

BANDAI MG 1/100 MSA-0011 DEEP STRIKER

Product size: Approx 21" Long, 11" Tall

Initiate Plan303E! Celebrating both the 30th Anniversary of the photo novel "Gundam Sentinel" and the release of 200 Master Grade kits, Bandai brings to reality the massive mobile suit weapons platform, code name: Deep Striker. Originally existing as a drawing, the S Gundam's theoretical upgrade module for assault operations has never been animated or featured in a story, but has gained massive fame for its heavily armed appearance. 

Over 21" long, this behemoth machine features a massive main gun unit, large radome, I-Field generator and giant boosters and propellant tanks covering its body. New molding is used for the bulk of construction including new pieces for the S Gundam's chest plate, the head, and shoulders that streamline its shoulder to head proportion, and even includes the shoulder sliding gimmick not seen on the original MG S Gundam release. 

A sense of realism and heft are created through mesh piping, chromed pistons, and intricate part separation in the main gun unit and tail stabilizer sections. 

A display stand is included to hold the Deep Striker in all its glory. 

Runner x 39, stickers, marking seals, instruction manual, mesh pipe, screw x 14, wire.

RM780.00
RM780.00 Request Stock
Quick View
img
SAVERM41.80

[233] HGUC 1/144 Messer

Release Date : Jun 2020
Estimate Delivery : July 2020

-Messer (provisional) from [Mobile Suit Gundam Flash Hathaway] has a movable gimmick inside the fuselage and appears in the HG series!

-By providing movable parts in various places, the structure that maximizes the action pose of the messer is achieved.
-The side armor is equipped with a slide gimmick that allows for more leg movement.
-Includes beam rifle, beam saber and shield.

[accessories]

* Beam rifle x 1
* Shield x 1
* Beam saber x 2
* Foil seal x 1

RM108.00
RM108.00 Request Stock
Quick View
img
SAVERM60.00

P-Bandai: MG 1/100 MS-06FS Zaku II (Garma Zabi Custom) [Reissue]

  • Premium Bandai based announces the release of the Garma Zabi\'s Zaku II! 
  • The kit is based on MG 1/100 Zaku II Ver. 2.0 with added minor detailing to adapt the FS type Zaku II exterior design. 
  • The kit also comes with a 175mm Recoilless Rifle and a unique heat hawk which is completely newly molded for master grade!
  • The kit is also completed with Garma Zabi dedicated decal seals to help detail the kit.

RM260.00
RM260.00 Request Stock
Quick View
img
SAVERM108.00

SD Ex-Standard Hello Kitty/RX-78-2 Gundam

Collaboration project of Hello Kitty who celebrated 45th and Gundam who celebrated 40th!

- Gundam and Hello Kitty appear as a set of SD EX-STANDARD!
- With apple parts and apple-shaped pedestal.
- Kitty can also sit down.

[accessories]
* Apple x 1
* Base x 1
* Armed x 1

RM92.00
RM92.00 Request Stock
Quick View
img
SAVERM39.80

[234] HGUC 1/144 MS-06S ZAKU II

-Gunpla 40th Anniversary! From [Mobile Suit Gundam], Char\'s Zaku II appears in the HG series with new modeling!

-Revive proportions in [Mobile Suit Gundam] with the latest technology.
-The mono-eye can be moved by moving the operation rib on the back of the head.
-The arm also rotates the forearm in addition to the upper arm, ensuring a large range of motion.
-Includes soft material parts that further extend the range of motion of the waist. It is a selection type of plastic parts and soft material parts.
-Three weapons can be attached to the waist.

[accessories]
* Soft material skirt parts x 1 set
* PS molded skirt parts x 1 set
* Zaku machine gun x 1
* Zaku Bazooka x 1
* Heat Hawk x 1
* Foil seal x 1

RM56.00
RM56.00 Request Stock
Quick View
img
SAVERM258.20

Gundam Fix Figuration Metal Composite thq RX78-02 Gundam (40th Anniversary Ver.)

Reissue Date : Apr 2020
Estimate Delivery : May 2020

-[Gundam] with original coloring specification commemorating the 40th anniversary

-Commemorating the 40th anniversary of Mobile Suit Gundam, commercialized [RX-78-02 Gundam] from the high-brand GUNDAM FIX FIGURATION METAL COMPOSITE produced by Hajime Katoki.
-A movable pedestal can be set and displayed in a floating state.
-This is a luxury commemorative product with a new marking and drawing by Hajime Katoki.

-New coloring and marking specifications for products now.
-A set of recombination parts and weapons for various situations.
-A luxurious package with sleeves drawn by Hajime Katoki.

- set content
  • Body
  • 2 types of beam rifles
-  shield
  • Bazooka x 2
  • Core Pod
  • Shoulder cannon
-Replacement wrist left and right 3 types each
  • Beam saber x 2
  • Various body replacement parts
  • Dedicated pedestal

RM850.00
RM850.00 Request Stock
Quick View
img
SAVERM49.80

HG 1/144 RX-78-2 Gundam [Beyond Global]

-Gunpla 40th Anniversary! The [RX-78-2 Gundam] designed by Kunio Okawara is integrated with the technology cultivated in the [HG Series]!

-Pursue [Beautiful posing] and [Mobility and proportions]. A number of gimmicks are provided throughout the body that allow for natural poses.
-A design that reexamines the design of First Gundam and pursues it to the limit as [BEYOND GLOBAL].
-Adopting forward bending and swinging movable structure on the body. The neck axis is also movable back and forth.
-A joint that bends inward at the base of the thigh to achieve a more human-like pose.
-Independent movement of the wrist allows free movement of the jointed shield.
-The wrist block can be moved as a separate part with a ball joint, and can be used to produce powerful movements such as gripping a fist.
-The hip joint swings and moves greatly forward. In addition, the rear skirt expands greatly, allowing it to move backwards.
-The block on the side of the chest is responsible for the movement of the part corresponding to the scapula.

[accessories]
* Beam rifle x 1
* Shield x 1
* Beam saber x 2
* Foil seal x 1

RM70.00
RM70.00 Request Stock
Quick View
img
SAVERM35.80

[17] SD Gundam Cross Silhouette RX-78-2 Gundam & MS-06S ZAKU II

-Gunpla 40th Anniversary! [RX-78-2 Gundam] and [Char\'s Zaku II] come out as a special color Ver. Set from the SDCS series!

-Includes 2 CS frame and various weapons.
-Let\'s reproduce that famous scene on the cross display!

[accessories]
* Beam saber x 1
* Beam rifle x 1
* Shield x 1
* Zaku machine gun x 1
* Zaku Bazooka x 1
* Heat Hawk x 1
* Missile pod x 2
* Foil seal x 2

RM72.00
RM72.00 Request Stock
Quick View
img
SAVERM109.30

P-Bandai: MG 1/100 Rick Dom (Dozle Zabi Use) [REISSUE]

Reissue Date: July 2020
Estimate Delivery: August 2020

Dozle Zabi's Dom joins the Master Grade series as Premium Bandai webshop exclusive. The kit shares the same molds with the regular released MG Dom with added "Dozle Zabi" aesthetics and detailing. One of the greatest things that came with the kit is the golden strips that wraps around on the sides of its armors, just like the Zaku version.

The kit also comes with unique heat hawk specialized only for Dozle Zabi! Also, this Dom will not be complete without Dozle Zabi's spiked armor features that were provided for its shoulders and manipulator armors.


RM310.00
RM310.00 Request Stock
Quick View
img
SAVERM139.30

P-BANDAI: MG 1/100 MS-07B Gouf MQuve Custom [REISSUE]

Reissue Date: July 2020
Estimate Delivery: August 2020

M'Quve's Gouf arrives in the Master Grade kit form! The entire kit's armor shares the inner framing with the regular released Gouf Custom, with entirely new molded parts for its armor parts. 

The unique features of M'Quve's Gouf is also combined and completed with golden seals that adds some elegant looking detail to the kit!

RM280.00
RM280.00 Request Stock
Quick View
img
SAVERM6.00

[NO. 30] FG 1/550 MAN-08 Lalah Sune Mobile Armor

  • MAN-08 Lalah Sune Mobile Armor
  • Release Date: October 1981
  • The MAN-08 Elmeth is a prototype mobile armor the Mobile Suit Gundam television series and the Mobile Suit Gundam III: Encounters in Space movie.

RM12.00
RM12.00 Request Stock
Quick View
img
SAVERM6.00

[NO. 22] FG 1/144 MSM-04 Acguy

  • MSM-04 Acguy (Gundam Model Kits)
  • Release Date: August 1981
  • Weight: 120Grams
  • The MSM-04 Acguy is a mass-produced amphibious mobile suit featured in the anime series Mobile Suit Gundam.

RM12.00
RM12.00 Request Stock
Quick View
img
SAVERM6.00

[NO. 10] FG 1/144 MSM-07 ZGok

  • MSM-07 ZGok (Gundam Model Kits)
  • Release Date: December 1980
  • Weight: 120 Grams

RM12.00
RM12.00 Request Stock
Quick View
img
SAVERM6.00

[NO. 9] FG 1/144 MS-07 Gouf

  • MS-07 Gouf (Gundam Model Kits)
  • Release Date: November 1980
  • Weight: 120 grams
  • The MS-07B Gouf is a mass production ground close-quarters combat mobile suit.

RM12.00
RM12.00 Request Stock

Showing 301 - 330 of 355 products