• Home
  • Showing Gundam Model Kits + MS GUNDAM WING / ENDLESS WALTZ product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + MS GUNDAM WING / ENDLESS WALTZ product(s)

img MS GUNDAM WING / ENDLESS WALTZ

Showing 61 - 90 of 141 products

Quick View
img
SAVERM61.30

HG 1/100 Wing Gundam Zero Custom (Special Operation Type)

Mastering grade with MG campaign of the 30th [ganpura] anniversary and clear exterior. The limited amount, and a clear exterior parts and one runner are an additions wholly and same prices. It can enjoy a mechanical interior.

RM118.60
RM118.60 Request Stock
Quick View
img
SAVERM112.40

MG 1/100 Gundam Deathscythe-Hell EW Ver.

  • Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  • Uses the XXX-G Frame developed during the animation!
  • Marking work is designed by Hajime Katoki.
  • Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  • New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  • Able to reproduce the flapping from the animation naturally. 
  • The closed state of the Active Cloak can also be reproduced with a natural form. 
  • Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 

RM157.50
RM157.50 Request Stock
Quick View
img
SAVERM24.20

[EW-5] HG 1/100 Gundam Deathscythe Hell Custom

Gundam Deathscythe Hell as it appears in the Gundam Wing: Endless Waltz OVA. It features snap-assembly, is fully poseable and is molded in color. Large, bat-like wings on the back can fold around the model to produce a cloak-like effect. Of course the distinct beam scythe is included so you can recreate all the havoc-wreaking this suit does in Endless Waltz! Also included a 1/20 scale non painted Duo Maxwell figure.

RM95.70
RM95.70 Request Stock
Quick View
img
SAVERM15.90

[366] SDBB Wing Gundam EW

- MS Wing Yui Hiiro hero, BB appeared in the warrior! - Variations in flight form? - Air-armed me! - BB Orijinarugimikku! The combined arms! Transform large arms! - Also provides colorful colors color and foil seal forming! - New policies adopted caps! Determine the various poses! - Accessories: beam rifle, shield, energy pack, the base

RM32.00
RM32.00 Request Stock
Quick View
img
SAVERM43.90

[EW-6] HG 1/100 Gundam Sandrock Custom

HG-grade kit of the new version of the Gundam Sandrock as it appears in the Gundam Wing: Endless Waltz OVA series. As usual, it features snap-assembly, is fully posable and is molded in color. Features two huge, curved scimitar-like weapons and a fabric cloak (yes, two sheets of fabric are included) that it can be configured in a number of ways. Includes unpainted figure of Qatre Reberba Winner, the pilot.

RM76.00
RM76.00 Request Stock
Quick View
img
SAVERM11.00

[WF-10] 1/144 Gundam Epyon

Antagonist transforming Gundam from tv series "Gundam Wing." Features large beam sword, heat whip, and includes figure of Milliardo Peacecraft.

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM33.90

[05] HG 1/100 Gundam Epyon

From Gundam Wing comes the impressive transformable Gundam Epyon. Designed as a close combat mobile suit embodying the spirit of a duelist, this Gundam carries an iconicly large beam saber powered by its own reactor and a heat whip capable of melting the toughest steel. The HG 1/100 kit briliantly captures the menacing look of Epyon while being easy to assemble and transforming into its twin headed dragon mobile armor mode.

RM55.00
RM55.00 Request Stock
Quick View
img
SAVERM33.90

[01] HG 1/100 Wing Gundam

Lead mecha design from the anime TV series "Gundam Wing." This action figure model kit features specially chromed plastic on all yellow parts to give off a bright metalic hue. Is transformable from "Bird Mode" to "mobile suit mode" without part swapping and includes extra effects to simulate fast speeds on wings. Buster rifle, beam saber included. Clear green jewel sticker provided to replicate search eye on chest.



RM55.00
RM55.00 Request Stock
Quick View
img
SAVERM23.90

[07] HG 1/100 Gundam Deathscythe Hell

Upgraded form of Deathscythe in Gundam Wing TV series. This action figure model kit featuries a twin beam scythe with adjustable scythe blades and working buster shield along with articulated Active Cloak that can open and close. Specially chromed plastic on all yellow parts give off a bright metalic hue.

RM84.00
RM84.00 Request Stock
Quick View
img
SAVERM11.00

[WF-05] 1/144 Gundam Sandrock

[WF-05] HG 1/144 Gundam Sandrock

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM11.00

[WF-01] 1/144 Wing Gundam

- product name: Wing Gundam

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM11.00

[WF-03] 1/144 Gundam Deathscythe

Grim reaper themed Gundam from Gundam Wing. Features scythe weapon and buster shield. Figure of Duo Maxwell included

Item Size/Weight : 21.7 x 15.2 x 4.8 cm / 136g

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM121.70

NG 1/60 Wing Gundam 0

Discontinued product, RARE ITEM !! - The only big-scale (1/60) kit to come out of the Wing series. Led lights up in three places - Chest, Eye and Shield. Fingers are individually moveable. Item Size/Weight : 39.4 x 31.2 x 11.5 cm / 977g

RM132.30
RM132.30 Request Stock
Quick View
img
SAVERM40.20

[EXPO] RG 1/144 Wing Gundam Zero Ew (Gloss Edition)

RG 1/144 Wing Gundam Zero EW (Pearl Gloss Ver.)


The ever iconic Wing Gundam Zero Custom from Gundam Wing Endless Waltz returns in Real Grade Pearl Gloss Edition - a limited event item!!! The wing structure of this Wing Zero interpretation are based on application of current real world technology used in aircraft. Considerable thought has been put into heat protection and machine protection as well as design and function for an otherwise unorthodox mecha design. Even the flexible feather shaped extremities incorporate elements from thrust vectoring mechanisms of combat aircraft. Twin Buster Rifle and beam sabers included. Approx 5" tall. Runner x9, Instruction Manual x1, Realistic decal x1.

RM159.70
RM159.70 Request Stock
Quick View
img
SAVERM10.00

P-BANDAI: MG 1/100 Gundam Sandrock Armadillo [2nd Batch]

Bandai Spirits celebrates Gundam Wing series' 25th anniversary with another release of amazing Gundam unit to complete the Glory of Losers variant series. The kit will be sharing its molds with the original retail released MG 1/100 Gundam Sandrock, included with its Armadillo unit which has given an entirely new mold for this exclusive Premium Bandai kit.

The backpack support also comes with an entirely new mold which gives another definition to the Gundam Sandrock's Armadillo equipment.

The kit also comes with a newly designed water slide decals for detailing, that is personally designed by Katoki Hajime.

RM400.00
RM400.00 Request Stock
Quick View
img
SAVERM32.00

[LINITED ITEM] MG 1/100 TALLGEESE III (SPECIAL COATING)

Gundam Limited 


MG 1/100 TALLGEESE III (SPECIAL COATING)

RM488.00
RM488.00 Request Stock
Quick View
img
SAVERM60.00

P-Bandai : MG 1/100 Gundam Deathscythe EW [Rousette]

The Gundam Deathscythe EW Rousette Unit is finally coming to the Master Grade series! The kit shares the same molds with Gundam Deathscythe EW regular retail model kit that was released in 2010. This kit, of course comes with its completely newly molded Glory of Losers equipment called \"Rousette\" which adds a backpack unit to the Deathscythe to give it more aerial mobility.
The Rousette unit can also be folded into different modes; the normal mode which is folded towards its back when not in use, and flight mode where it\'s wingspan is extended to the sides to give some flight ability to its main unit. The kit is completed with all the Gundam Deathscythe EW equipment plus a sheet of water slide decals for detailing.

[ACCESSORIES]

* Rousette unit
* Beam Scythe
* Buster Shield

RM320.00
RM320.00 Request Stock
Quick View
img
SAVERM72.00

[Super Nova - MoXin] XXXG-OOWO MG 1/100 Wing Gundam EW Ver. [Purple Edition]

[Super Nova - MoXin] XXXG-OOWO  MG 1/100 Wing Gundam EW Ver.


- Purple Color Edition 

- The wing feather effect is included
- Drei Zwerg Weapon Unit is included
- Dedicated Action Base is incduded

RM188.00
RM188.00 Request Stock
Quick View
img
SAVERM40.70

[Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom EW Gundam (IGEL Equipment)

1/100 MG XXXG--01H2 Heavyarms Custom Gundam EW (IGEL Equipment)

- MG 1/100 Heavyarms Custom 
- From Super Nova (Formally known as Dragon Momoko)
- Pre-painted plastic, no paint required.
- Self assembly required
- Included Manual & water decal


Set contains:
- 2 joker mask
- 4 Gatling guns
- Gatling gun holder

Kindly note that this kit is a NON-BANDAI product.

RM169.00
RM169.00 Request Stock
Quick View
img
SAVERM29.90

[239] HGAC 1/144 Gundam Deathscythe

?? From Mobile Suit Gundam Wing, the TV version of Gundam Deathscythe is three-dimensionalized on HG 1/144 scale!
?? Natural poses are possible with the slide gimmick of the shoulder armor and knee armor.
?? Two types of beam size effects are included.
?? The blade parts of the Buster Shield are linked to the left and right. Reproduce the beam injection state by attaching clear parts.
?? Beam size Parts that can reproduce the stored state are included. Can be attached to the rear armor.

[Accessories]
?? Beam size x 1
?? Beam size storage state reproduction parts x 1
?? Buster shield x 1 type
?? Effect parts (for beam size) x 2 types
?? Effect parts (for buster shield) x 1
?? Foil seal x 1

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM11.70

The Gundam Base Limited Wing Gundam Zero EW [Clear Color]

The Gundam Base Limited Wing Gundam Zero EW [Clear Color]

RM168.00
RM168.00 Request Stock
Quick View
img
SAVERM69.30

[Super Nova - MoXin] XXXG-OOWO MG 1/100 Wing Gundam EW Ver. [Snow White Edition]

[Super Nova - MoXin] XXXG-OOWO  MG 1/100 Wing Gundam EW Ver. [Snow White Edition]

This is Non-Bandai product.

RM350.00
RM350.00 Request Stock
Quick View
img
SAVERM28.00

Event Limited HG 1/144 Sandrock Gundam [Clear Color]

Event Limited HG 1/144 Sandrock Gundam [Clear Color]

RM92.00
RM92.00 Request Stock
Quick View
img
SAVERM30.00

P-Bandai : MG 1/100 Tallgeese Fluegel EW

Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers continues its amazing releases with the Master Grade Tallgeese Flugel! This kit offers numerous amount of newly molded parts, from its head to its wing binders. The kit also shares the same molds with the MG 1/100 Tallgeese EW for its main body and added with various equipment new to the Tallgeese Flugel, that includes both heat lance and heat halberd.

RM420.00
RM420.00 Request Stock
Quick View
img
SAVERM15.00

DABAN 6620 MG 1/100 Tallgeese Gundam

DABAN 6620 MG 1/100 Tallgeese Gundam


Brand : DABAN
Country Made : China
Code : 6620

Please note that this is not Bandai product

RM65.00
RM65.00 Request Stock
Quick View
img
SAVERM109.40

Daban 8827 MG 1/100 Snow White Prelude Wing Zero Gundam

Daban 8827 MG 1/100 Snow White Prelude Wing Zero Gundam

Brand : Daban
Code : 8827
Grade : Master
Scale : 1/100
Model : Snow White Prelude Wing Zero Gundam

Please note that this is NON-Bandai product

RM250.00
RM250.00 Request Stock
Quick View
img
SAVERM5.00

Daban 8825 HIRM 1/100 Wing Gundam EW Hi-Resolution alike Model

Daban 8825 HIRM 1/100 Wing Gundam EW Hi-Resolution alike Model

Brand : Daban
Scale : 1/100
Model : Wing Gundam EW
Grade ? Hi-Resolution

Please note that this is not Bandai product

RM125.00
RM125.00 Request Stock
Quick View
img
SAVERM37.40

[242] HG 1/144 After Colony Shenlong Gundam

Chang Wufei's Shenlong Gundam from "Mobile Suit Gundam Wing" gets a new HGAC model kit from Bandai! A movable shaft inside the chest unit allows natural lateral bending, as well as forward-and-backward bending. The cockpit block can move up and down when the robot bends back and forth. Slide joints in the shoulders improve the range of motion for more dynamic poses! Arm extension parts can be attached to reproduce the "Dragon Hang" weapon's full extension! Interchangeable hands are also included, as are a shield and a Beam Glaive. Order this distinctive Gundam for your own collection today!

[Includes]:

* Beam Glaive
* Shenlong Shield
* Interchangeable hands (left and right, x3 each)
* Dragon Hang expansion and contraction joint (x2)
* Stickers

RM52.50
RM52.50 Request Stock
Quick View
img
SAVERM104.60

[38] RG 1/144 Gundam Epyon

The mighty Gundam Epyon from "Mobile Suit Gundam Wing" gets a completely new Real Grade (RG) model kit from Bandai! It's equipped with a new gimmick that's optimized to help it handle its beam sword powerfully and naturally, plus an amazing all-new original feature allows it to transform into a double-headed pterosaur! Its torso flexibility is better than ever, enabling it to bend forward; the hip joints have a lock mechanism for strong stances. The upper part of the wrist and the forearms are more flexible than before too; the shoulder armor allows Epyon to raise its shoulders while keeping the shoulders in position, enabling it to raise the beam sword with both hands! The blades on its knees will not interfere with kneeling poses, and the height of the wings can be adjusted by moving the base shaft. When in pterosaur mode, its mouths can be opened and closed, and a pull-out ball movement is built into Epyon's shins to serve as the pterosaur's neck joints. An advanced MS joint is adopted for the heat rod for a high degree of flexibility; the cable that connects the beam sword and the mount latch uses a lead wire. This classic robot is now better than ever before thanks to Bandai -- order yours today!

[Includes]:

Beam sword
Beam sword holder
Shield
Heat rod
Hands (x1 set)
Display joint (x2 types, for robot mode & pterosaur mode)
Lead wire
Decals

RM147.00
RM147.00 Request Stock
Quick View
img
SAVERM228.70

METAL ROBOT Damashii (SIDE MS) Wing Gundam Zero

Bandai's spectacular Metal Robot Damashii figure of Wing Gundam Zero from "Gundam Wing" is back! Sharp modeling, precise painting and heavy die-cast parts all combine for a high-class finish. It's also equipped with opening and closing gimmicks, and it can transform into its Neo-Bird form too! The machine cannons built into both shoulders can be rotated out and in; the buster rifle can be switched between a double-mounted and split form. The Neo-Bird form can also be reproduced without parts replacement, and the verniers in the soles of the Wing Gundam Zero's feet are perfectly mimicked. Detailed thruster units and verniers are also mounted on the backpack. Order it for your own collection now!
  • [Figure Size]: Approximately 14cm tall
  • [Materials]: ABS, PVC, die-cast


[Set Contents]:

    • Main figure
    • Interchangeable hands (x3)
    • Twin buster rifle
    • Wing shield
    • Joints for Soul Stage (x2 types)
    • Beam saber blade (x2)
    • Beam saber pattern (x2)
    • Base set

    RM550.00
    RM550.00 Ask Availability

    Showing 61 - 90 of 141 products