• It appears from the BB soldier of the 30th Gundam anniversary in a Gundam new specification. 
  
• The prime field uses the one of BB soldier No.236 perfect Gundam. 
  
• It is a popular style in the RX-78-2 Gundam of the BB soldier series. 
  
• Movable range of head to decide line of vision easily. Even with arms with the collaboration parts of the chest and the shoulder, the pose is decided. Flight pose road-hugging ..&.. high. range of movement & movable tiptoe it where hip joint is wide - It is the marking Tetoron seal attached though it is small that produces the outlook on the field of real of ..becoming it.. [sei]. 
  
• Arms are a new metal molds and newly built types. Special arms to consider the outlook on the world of a real BB soldier are reproduced by a new metal mold. - Accessories: 1 and 1 and shield × beam saber × 1 beam rifle.
  

BB Cross Bone Gundam X2

BB Gundam Blue Destiny

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

Born from the collaboration between Bandai Namco Games, Bandai, Sunrise, and Banpresto for their "Harmony of Gundam" project, the Zaku I Sniper Type is a new Zeon Mobile Suit especially created for the new "MS Gundam: Bonds of the Battlefield" arcade game. 

Original Zaku in the superb 1/144 HGUC series (note that some overseas arms of Bandai repackaged the "8th MS Team" version of the Zaku, and formed it in red plastic, calling it Char's Zaku, but that was never released in Japan, and a completely different tooling from this item). 

It's been a good year so far for Gundam Modellers. Bandai's Gunpla 30th Anniversary campaign has seen some stellar releases and now we are being treated to the Extra Finish Version of the Perfect Grade RX-78-2! Molded in a special finish that really gleams under lighting, this Gundam is otherwise identical to the original kit released in 1998 and features an incredible level of INNER detail. Just about everything you could hope for in terms of detail and poseability is here. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this! Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece is completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

• Okay, for a monster machine like this, with parts sticking out all over, and which is so top heavy it cannot stand on its own, the naming of "Ex-S" seems appropriate, considering the homonym "excess." 
  
• But gosh, it's sooo sharp looking... Let me come back to that point about standing up by itself: It can't. At first, when I saw that this kit came with a display stand to hold it up, I was greatly dissapointed, as I really was looking forward to building it. 
  
• But then I started thinking about all the other Gundam kits of mine that have fallen over and broken or lost parts when I had them posed someplace, and I began to think that maybe a display stand isn't such a bad idea after all... 
  
• Of course the kit can transform into the long-range "G-Cruiser" mode, similar to the Zeta Gundam, and the display stand itself also converts into a mode specifically designed for displaying the kit when it's in ship mode. A whopping 31 runners of parts in all! Get ready for hours of cuttin' 'n' snappin' with this baby!
  

By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.

Item Size/Weight : 31 x 20 x 14 cm / 717g

From "Mobile Suit Crossbone Gundam", Space Pirate Crossbone Gundam X2 breaks that have been restored appeared in HGUC series!

From "Mobile Suit Crossbone Gundam", to commercialize Crossbone Gundam X2 modified with HGUC series.
Crossbone Gundam X2 breaks distinctive body shape and to reproduce the armed!

● X2 reproduce breaks specific body shape!
And head and blade antenna shape is different from the X1, the part of the back thrusters reproduced in the new shape.

-Head and blade antenna
Reproduce some form of head in the new shape.
Of angle of change shape at the top, blade antenna with features. Aspect design is also reproduced in the mold.

Hive thrusters
The shape of the thrusters tip is to have been large in size and reproduced in the new parts.

● Buster launcher included!
detail a dedicated large weapon Buster launcher of the Crossbone Gundam X2 breaks to be used is also included in the rich new shape.
Total length of about 150mm.

● scissor anchor other, rich comes armed. Weapon dedicated hand parts also enhance.

Comes armed: Buster Launcher / scissor anchor / heat Dagger / beam saber /
Than Buster (beam Zanba / Buster cancer) / brand marker / beam shield

P-Bandai: HGUC 1/144 MS-08TX Efreet

FG 1/144 3 in 1 Combo Set

P-Bandai MG 1/100 Jegan Type D

• Hand parts x 1 set
• Frame custom parts x 1 set
• Gym parts x 1 set
• Foil seal x 1

-Gunpla 40th Anniversary! From [Mobile Suit Gundam], Char\'s Zaku II appears in the HG series with new modeling!

-Revive proportions in [Mobile Suit Gundam] with the latest technology.
-The mono-eye can be moved by moving the operation rib on the back of the head.
-The arm also rotates the forearm in addition to the upper arm, ensuring a large range of motion.
-Includes soft material parts that further extend the range of motion of the waist. It is a selection type of plastic parts and soft material parts.
-Three weapons can be attached to the waist.

[accessories]
* Soft material skirt parts x 1 set
* PS molded skirt parts x 1 set
* Zaku machine gun x 1
* Zaku Bazooka x 1
* Heat Hawk x 1
* Foil seal x 1

-The Origin Version RX-78-02 Gundam is now available in HG from [Mobile Suit Gundam THE ORIGIN]!

-Items suitable for the opening of the 40th anniversary of the Gunpla, such as the parts composition that can reproduce colors just by assembling, the latest format of the HG series, etc.-You can enjoy the design of both the early model, which is characterized by left-right asymmetry, and the mid-term model, which is characterized by left-right asymmetry.-The forearm is equipped with a gatling gun on the left forearm to reproduce the previous model. The shape of the cuffs is also different and it is asymmetrical. The mid-term model has left and right parts of the same shape.-The chest has a shoulder magnum on the upper left and a Vulcan cannon on the upper right to reproduce the previous model's left-right asymmetry. On the other hand, by forming the left cover block with parts common to the left and right, it is possible to reproduce the mid-type symmetrical shape.-The shoulder part can be reproduced in the first half and the middle half by selecting the top part.-Equipped with a movable vernier on the calf. The cover can be unfolded and displayed.-Toe parts are also movable.-Attached weapons can be attached to the joints on the waist and shield.

-Gunpla 40th Anniversary! [RX-78-2 Gundam] and [Char\'s Zaku II] come out as a special color Ver. Set from the SDCS series!

-Includes 2 CS frame and various weapons.
-Let\'s reproduce that famous scene on the cross display!

[accessories]
* Beam saber x 1
* Beam rifle x 1
* Shield x 1
* Zaku machine gun x 1
* Zaku Bazooka x 1
* Heat Hawk x 1
* Missile pod x 2
* Foil seal x 2