Price Clear







Modelling Tools

Showing 61 - 90 of 693 products

img
SAVERM10.40

Tamiya Color Acrylic Paint Mini X-19 (Smoke) (10ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.


Each bottle of Mini Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-19
Color: Smoke
Volume: 10ml

RM9.50
img
SAVERM13.30

Tamiya Color Enamel Paint XF-84 Dark Iron (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

RM10.60
img
SAVERM12.00

[B518] (MR HOBBY) Mr.BASE WHITE 1000 SPRAY (180ml)

Mr. Base White 1000 Mr. Hobby spray is a primer paint that used to cover up colors on a surface such as red, black, blue, ext. and turn the surface to white. It is designed to completely cover the base color and assist in the application of new color, detailed finishing and Top Coats.

RM36.00
img
SAVERM14.60

[B522] (MR HOBBY) Mr.SUPER CLEAR UV CUT GLOSS SPRAY (170ml)

Mr. Super Clear is one of the most popular sealants available. Use it after painting to give your it a lasting seal. The UV-Cut series gives protection to your paint job against harmful UV rays that can cause them to yellow over time. This particular type dries to a GLOSS finish. Warning: Flammable. Please use in ventilated area. Handle with care.

RM45.30
img
SAVERM8.40

[B529] (MR HOBBY) MR. FINISHING SURFACER 1500 WHITE SPRAY (170ml)

Mr. FINISHING SURFACER provides a smooth finish on the surface of parts and does not easily fill in molded areas. The white FINISHING SURFACER released this time is most suitable for final finishing before painting a character model or car model or for final finishing of the base form of figure painting that calls for bright colors.

RM42.00
img
SAVERM7.00

[B506] (MR HOBBY) MR. SURFACER 500 SPRAY (100ml)

Mr. SURFACER 500 SPRAY CAN contains finer granules than Mr. SURFACER 500. They are both used in much the same way. Due to the finer granules after sanding with waterproof sand-paper, a perfectly corrected surface is possible. Available in bottle and spray.

RM26.00
img
SAVERM5.20

[B505] (MR HOBBY) MR. SURFACER 1000 SPRAY (100ml)

Mr.SURFACER 1000 contains finer granules than Mr.SURFACER 500. They are both used in much the same way but ,due to the finer granules after sanding with waterproof sand-paper , a perfectly corrected surface is possible. Available in bottle and spray.

RM26.00
img
SAVERM13.90

[B504] Mr Metal Primer R 40ml Spray

Brand: Mr Hobby
Capacity: 40 ml

Undercoats for metal models and parts to make Mr.COLOR and other AQUEOUS HOBBY COLORS usable for surfaces.

RM30.00
img
SAVERM10.40

Tamiya Color Acrylic Paint Mini X-23 (Clear Blue) (10ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.


Each bottle of Mini Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-21
Color: Clear Blue
Volume: 10ml

RM9.50
img
SAVERM5.50

Mr Hobby Mr Color Thinner (50 ML) [Acrylic & Lacquer]

Mr Color Thinner - 50ml

*Suitable for Acrylic & Lacquer based paints

*Mr.Color Thinner can be used for dilution and cleaning

Mr. Color Thinner is a multiple use material and is a must-have for anyone who wants to try their hand at painting. It is a necessary component to thin out paints can also be used during airbrushing for thinning and cleanup paints.

RM9.50
img
SAVERM14.40

Tamiya Color Enamel Paint XF-27 Black Green (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Water Base) 
Color Code: XF-27
Color: Black Green
Quantity: 10ml

RM9.50
img
SAVERM13.30

Tamiya Color Enamel Paint XF-26 Deep Green (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-26
Color: Deep Green
Quantity: 10ml

RM10.60
img
SAVERM8.00

[B602] MR Hobby Premium Top Coat Semi Gloss 88ml Spray

Water based Semi Gloss coating agent for finishing surfaces.


It is very effective for military models as well as for skin color in figures. It is water based, so you can use it on surfaces painted with AQUEOUS HOBBY COLOR, ACRISION COLOR and Mr. COLOR.

RM40.00
img
SAVERM13.30

Tamiya Color Enamel Paint XF-51 Khaki Drab (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-51
Color: Khaki Drab
Quantity: 10ml

RM10.60
img
SAVERM14.40

Tamiya Color Enamel Paint XF-57 Buff (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-57
Color: Buff
Quantity: 10ml

RM9.50
img
SAVERM14.40

Tamiya Color Enamel Paint XF-60 Dark Yellow (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-60
Color: Dark Yellow
Quantity: 10ml

RM9.50
img
SAVERM13.30

Tamiya Color Enamel Paint XF-61 Dark Green (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-61
Color: Dark Green
Quantity: 10ml

RM10.60
img
SAVERM14.40

Tamiya Color Enamel Paint XF-62 Olive Drab (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-62
Color: Olive Drab
Quantity: 10ml

RM9.50
img
SAVERM14.40

Tamiya Color Enamel Paint XF-70 Dark Green 2 (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-70
Color: Dark Green 2
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C171 Fluorescent Red Flat (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C171
Colour: Fluorescent Red
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C172 Fluorescent Yellow Flat (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C172
Colour: Fluorescent Yellow
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C173 Fluorescent Orange Semi Gloss (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C173
Colour: Fluorescent Orange
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C175 Fluorescent Green Flat (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C175
Colour: Fluorescent Green
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C183 Super Clear Gray Tone Flat (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C183
Colour: Super Clear Gray Tone
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C188 Flat Base Rough (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C188
Colour: Flat Base Rough
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C189 Flat Base Smooth (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C189
Colour: Flat Base Smooth
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C301 Gray FS36081 Semi-Gloss (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C301
Colour: Gray FS36081
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C302 Green FS34092 Semi-Gloss (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C302
Colour: Green FS34092
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C303 Green FS34102 Semi-Gloss (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C303
Colour: Green FS34102
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C330 Dark Green BS381C/641 Semi-Gloss (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C330
Colour: Dark Green  BS381C/641
Quantity: 10ml

RM9.50

Showing 61 - 90 of 693 products