Price Clear







SURFACER

Showing 1 - 15 of 15 products

img
SAVE RM11.10

Mr Hobby Mr Base White 1000

Mr. BASE WHITE is useful for making a black, red or other dark-colored surface white. This newly developed product uses special pigments to completely hide the base color and aids application of detailed finishing and top coats. Because it also works as a surfacer, it can be used to hide small imperfections. - Personal advice Clean the surface with sandpaper before applying surfacer, + after applying surfacer, kindly wait for a moment until the surface dries. - How long to wait for the this white base1000 to dry? Normally at minimum of time :), please wait an hour for it to dry to cover the surface. - Do I need thinner for this white base 1000 to dry? Since are using the bottles, you should thin them with a 50:50 or a 60:40 ratio to prevent "cobwebbing". "Cowebbing" - means the primer dries as soon as it is sprayed out of an airbrush, leading to an effect that looks like spider webs. You may also see some video on applying surfacer + white base 1000 by hobbyist http://www.youtube.com/watch?v=1qmk2TYeh1Y

RM17.80
img
SAVE RM11.10

Mr Hobby - MR SURFACER 1000 (Grey) 40ml

  • Mr Hobby Brand
  • Mr. Surfacer is an important step for the painting process. You can use it to fill in all those little imperfections, and also acts as a primer to give a neutral background for a consistent color throughout your piece. 1000 contains fine granules, providing a moderate blend between the ultra fine particles of 1200 and more globular filler properties of 500.
  • Mr. SURFACER 1000 contains finer granules than Mr. SURFACER 500. They are both used in much the same way. Due to the finer granules after sanding with waterproof sand-paper, a perfectly corrected surface is possible. Available in bottle and spray.
  • great material for filling in gaps of two points.
  • dries quickly, please apply this before painting 

RM17.80
img
SAVE RM11.10

Mr Hobby - MR SURFACER 500 (Grey) 40ml

  • Mr. Hobby Brand
  • Mr. Surfacer is an important step for the painting process. You can use it to fill in all those little imperfections, and also acts as a primer to give a neutral background for a consistent color throughout your piece. 1000 contains fine granules, providing a moderate blend between the ultra fine particles of 1200 and more globular filler properties of 500.
  • great material for filling in gaps of two points.
  • dries quickly, please apply this before painting.
  • Useful for filling in bumps, dents, scratches, for removing bubbles, texturing and finishing bases. It is suitable for large-scale repairs and can be used as soluble putty.

RM17.80
img
SAVE RM11.10

Mr Hobby - MR SURFACER 1200 (Grey) 40ml

  • Mr Hobby Brand
  • Mr. Surfacer is an important step for the painting process. You can use it to fill in all those little imperfections, and also acts as a primer to give a neutral background for a consistent color throughout your piece. 1000 contains fine granules, providing a moderate blend between the ultra fine particles of 1200 and more globular filler properties of 500.
  • great material for filling in gaps of two points.
  • dries quickly, please apply this before painting 

RM17.80
img
SAVE RM10.18

Tamiya Putty-Basic Type - 32g

Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. 

The putty is gray in color and may be applied with a flat surface tool. 

Note: 

Tamiya’s basic type putty is not intended to fill large gaps. It is meant to fill in seams and imperfections in plastic model surfaces. The basic putty may also be used for resin model, metal model and vinyl model applications. 


RM19.80
img
SAVE RM7.80

Tamiya Epoxy Putty - Smooth Surface

  • High Density Type.
  • Tamiya's epoxy putty in a smooth surface formula. This version is smoother and easier then the previous version. 
  • Hint: Wet your tools or fingers with a bit of water while working with it to minimize sanding after.

RM22.10
img
SAVE RM10.48

MODO MK-11 Surfacer (Grey) 50ML

  • contains 50ML
  • MODO Surfacer (Grey) 50ML
  • Base color to apply on plastic model kits before apply other color

RM25.50
img
SAVE RM14.40

MODO MK-12 Surfacer (Black) 50ML

  • contains 50ML
  • MODO Surfacer (Black) 50ML
  • Base color to apply on plastic model kits before apply other color

RM25.50
img
SAVE RM10.48

MODO MK-13 Surfacer (White) 50ML

  • Contains 50ML
  • MODO Surfacer (White) 50ML
  • Base color to apply on plastic model kits before apply other color

RM25.50
img
SAVE RM12.30

Tamiya Liquid Surface Primer 40ml - White

  • The currently available Liquid Surface Primer is highly useful for filling seam lines and smoothing over scratches in small or difficult to reach areas since it can be applied with a modelling brush. However, since some modellers have found it difficult to paint over it with a lighter color, we now release this white-colored version of the liquid primer to solve this problem. 
  • You can also thin out the primer with Tamiya Lacquer Thinner for convenient application with airbrushes. Each bottle contains 40ml.

RM23.60
img
SAVE RM12.38

Tamiya Liquid Surface Primer 40ml - Gray

  • In order to smooth over small scratches etc., many modelers have created their own liquified putty by dissolving putty with lacquer thinner. Tamiya now makes this process a whole lot easier by releasing our very own liquified putty, Liquid Surface Primer. Just brush on over scratches, rough areas etc. and you will get that perfect smooth finish.
  • Applies easily to small areas using a modeling brush
  • Can be used on plastic, metal and wooden models
  • Can be further diluted using Tamiya Lacquer Thinner, allowing it to be used in airbrushes.
  • 1 bottle contains 40ml

RM23.60
img
SAVE RM11.90

Mr Hobby - MR. PRIMER SURFACER 1000 (Gray) 40ml

  • Mr Hobby Brand

This is a surfacer with primer (base filling paint).
The material used in Surfacer 1000, which is gaining overwhelming popularity for plastic models has been improved for this product.
Surface attachment has been enhanced not only for plastic models but also for metal in etched parts and resin.
Spray type and bottle type are available. Color is gray.

RM21.00
img
SAVE RM11.40

Mr Hobby - MR.FINISHING SURFACER 1500 (Grey) 40ml

Mr Hobby - MR.FINISHING SURFACER 1500 (Grey) 40ml

This surfacer can be applied to give a final finish to the surface more smoothly.It has the characteristic of being fine grained and it is not prone to clogging up detail in the mold. Most suitable not only for making a base before painting but also for surface finishing of an original mold before casting.

RM21.00
img
SAVE RM11.40

Mr Hobby - MR.FINISHING SURFACER 1500 (White) 40ml

Mr Hobby - MR.FINISHING SURFACER 1500 (White) 40ml


Mr. FINISHING SURFACER provides a smooth finish on the surface of parts and does not easily fill in molded areas. The white FINISHING SURFACER released this time is most suitable for final finishing before painting a character model or car model or for final finishing of the base form of figure painting that calls for bright colors.

RM21.00
img
SAVE RM11.40

Mr Hobby - MR.FINISHING SURFACER 1500 (Black) 40ml

Mr Hobby - MR.FINISHING SURFACER 1500 (Black) 40ml


This is a black version of the Finishing Surfacer.This black base allows the omission of the painting of a black coat before applying a metallic color and reduces the thickness of painting.

RM21.00

Showing 1 - 15 of 15 products