• Home
  • Showing Gundam Parts + WATER DECALS / STICKERS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 241 - 270 of 502 products

Quick View
img
SAVERM8.90

Water Decal for MG 1/100 00 QAN[T] Gundam

- Water Decal for MG 1/100 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG Beargguy III

- Water Decal for HG BEARGGUY III water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG 1/144 00 QAN[T] Gundam

- Water Decal for HG 1/144 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for MG 1/100 GAT-X103 BUSTER Gundam

- Water Decal for MG 1/100 GAT-X103 BUSTER Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Alphabet Sign Water Decal (WHITE/GRAY)

[Da Lin] Alphabet Water Decal (WHITE/GRAY)


This is a High Quality Water Decal by Da Lin and not a sticker. 
- Not pre-cut like the Bandai slide water decal
- Common use for Model Kit
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Limited Ver. Zaku(yellow)

[Da Lin] Water Decal for MG 1/100 Limited Ver. Zaku (yellow)

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Limited Ver. Zaku(yellow)

- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Red Frame Kai

[Da Lin] Water Decal for MG 1/100 Gundam Astray Red Frame Kai

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gundam Astray Red Frame Kai
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Blitz Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Aegis Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for RG 1/144 X-1 Crossbone Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Freedom Gundam Ver 2.0

[Da Lin] Water Decal for MG 1/100 Freedom Gundam Ver 2.0

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Freedom Ver. 2.0 Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for HIRM 1/100 Red Frame

[Da Lin] Water Decal for Hi-Resolution 1/100 Astray Red Frame Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Special design for Hi-Resolution 1/100 Astray Red Frame Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Buster Gundam

[Da Lin] Water Decal for MG 1/100 Buster Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Buster Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/00 Duel Gundam

[Da Lin] Water Decal for MG 1/100 Duel Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Duel Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Blue Frame 2nd Revise

[Da Lin] Water Decal for MG 1/100 Astray Blue Frame 2nd Revise

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Astray Blue Frame 2nd Revise
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Providence Gundam

[Da Lin] Water Decal for MG 1/100 Providence Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Providence Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Justice Gundam

[Da Lin] Water Decal for MG 1/100 Justice Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Justice Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blast Impulse Gundam

[Da Lin] Water Decal for MG 1/100 Blast Impulse Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Blast Impulse Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Gundam Throne Drei

[Da Lin] Water Decal for HG 1/144 Gundam Throne Drei

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Gundam Throne Drei
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Raider Gundam

[Da Lin] Water Decal for HG 1/144 Raider Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Raider Gundam 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Calamity Gundam

[Da Lin] Water Decal for HG 1/144 Calamity Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Calamity Gundam 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Providence Gundam

[Da Lin] Water Decal for HG 1/144 Providence Gundam 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Providence Gundam 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Gundam Throne Zwei

[Da Lin] Water Decal for HG 1/144 Gundam Throne Zwei 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Gundam Throne Zwei 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Zabanya

[Da Lin] Water Decal for  HG 1/144 Zabanya

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit  HG 1/144 Zabanya
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Dual Blitz Gundam

[Da Lin] Water Decal for HG 1/144 Dual Blitz Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Dual Blitz Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 GP02A Gundam

[Da Lin] Water Decal for HG 1/144 GP02A Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 GP02A Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM9.90

Gundam Decal 141 Mobile Suit Gundam Seed Freedom Multiuse

A new lineup of Gundam Decals! Introducing water-transfer decals that can be used on 1/144 scale models!

Highly versatile water-transfer decals compatible with Mobile Suit Gundam SEED FREEDOM.
Includes decals compatible with HG 1/144 Rising Freedom Gundam, HG 1/144 Immortal Justice Gundam, HG 1/144 Black Knight Scode Shiva, etc.

[Accessories]
1 water-transfer decal

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM9.90

Gundam Decal 142 Mobile Suit Gundam Seed Freedom Multiuse

A new lineup of Gundam Decals! Introducing water-transfer decals that can be used on 1/144 scale models!

Highly versatile water-transfer decals compatible with Mobile Suit Gundam SEED FREEDOM.
Includes decals compatible with HG 1/144 Mighty Strike Freedom Gundam, HG 1/144 Infinite Justice Gundam Type-2, HG 1/144 Black Knight Squad Carla, etc.

[Accessories]
  • 1 water-transfer decal

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for MGSD Aerial Gundam

[Da Lin] Water Decal MGSD Aerial Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MGSD Aerial Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart

Showing 241 - 270 of 502 products