Price Clear







Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 301 - 330 of 502 products

img
SAVERM17.18

Water Decal PG 1/60 FX-550 SKY GRASPER

- Water Decal for PG FX-550 SKY GRASPER water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 21 cm x 24 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM18.80
img
SAVERM13.98

Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam

- Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11.5 cm x 13.5 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunpla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
img
SAVERM8.90

Water Decal RG/ HG 1/144 00 QAN[T] Gundam

- Water Decal for RG/ HG 00 QAN[T] OO?Qan[T] 
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM11.00

[Water Decal][Bandai] Mobile Suit Gundam Iron Blooded Orphans #103

[Bandai] Mobile Suit Gundam Iron Blooded Orphans Water Decal #1 (GD103)

For HGIBO / NG 1/100 Barbatos 

RM18.90
img
SAVERM11.90

[Water Decal][Bandai] Mobile Suit Gundam Iron Blooded Orphans Multiuse (HGIBO) #104

[Bandai] Mobile Suit Gundam Iron Blooded Orphans Water Decal #2 (GD104)
For HGIBO / NG 1/100 Iron-Blooded Orphans Series

RM18.00
img
SAVERM6.10

Bandai Water Decal #108 HGUC Mobile Suit Gundam ZZ Multiuse

[Bandai] Mobile Suit Gundam ZZ (GD108)



For HGUC Mobile Suit Z Gundam , Gundam ZZ Series 1

RM17.90
img
SAVERM8.00

[Da Lin] Number Sign Water Decal (WHITE/GRAY)

[Da Lin] Number Water Decal (WHITE/GRAY) (C003WG)


This is a High Quality Water Decal by Dalin and not a sticker. 
- Water decal for MG Unicorn Gundam 02 Banshee
- Not pre-cut like the Bandai slide water decal
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Caution 001 (RED/BLACK)

[Da Lin] 1/100 Caution Water Decal (RED/BLACK)


This is a High Quality Water Decal by Dalin and not a sticker. 
- Water decal for MG Unicorn Gundam 02 Banshee
- Not pre-cut like the bandai slide water decal
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Caution 001 (WHITE/GRAY)

[Da Lin] 1/100 Caution Water Decal (WHITE/BLACK)


This is a High Quality Water Decal by Dalin and not a sticker.
- Water decal for MG Unicorn Gundam 02 Banshee
- Not pre-cut like the Bandai slide water decal
- Extra touch of detail for modeling kits 

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Caution 002 (WHITE/GRAY)

[Da Lin] 1/100 Caution Water Decal 002 (WHITE/BLACK) (C002WB)


This is a High Quality Water Decal by Dalin and not a sticker. 

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Caution 002 (BLACK/RED)

[Da Lin] 1/100 Caution Water Decal 002 (BLACK/RED) (C002BR)


This is a High Quality Water Decal by Dalin and not a sticker. 

RM10.00
img
SAVERM8.00

[Da Lin] 1/144 and 1/100 Number Sign Water Decal (Black / Red)

[Da Lin] Number Water Decal (BLACK / RED)


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Color : Black / Red
- Suitable for 1/144 and 1/100 Gundam Model Kit in General.
- Best use with Mr Hobby Mr. Mark Setter
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Destiny Gundam

[Da Lin] Water Decal for RG 1/144 Destiny Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Destiny Gundam
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong
- Best use with Mr Hobby Mr. Mark Setter

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Char's Zaku

[Da Lin] Water Decal fr RG Char's Zaku Water Decal 


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 for Char's Zaku
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Strike Freedom Gundam

[Da Lin] Water Decal for RG 1/144 Strike Freedom Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Strike Freedom Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Johnny Ridden Zaku II High Mobility Type

[Da Lin] RG Johnny Ridden Zaku II High Mobility Type Water Decal (RG21)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for Johnny Ridden Zaku II High Mobility Type 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Exia Gundam + Repair II

[Da Lin] Water Decal for RG 1/144 Exia Gundam + Repair II


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Exia Gundam + Repair II
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 GP01 Gundam + Full Burnern

[Da Lin] RG GP01 Gundam + Full Burnern Water Decal (RG17)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG GP01 Gundam + Full Burnern 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Wing Gundam Zero Custom EW

[Da Lin] Water Decal for RG 1/144 Wing Gundam Zero Custom EW


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Wing Gundam Zero Custom EW
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Tallgeese I

[Da Lin] Water Decal for RG 1/144 Tallgeese I Water Decal


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG 1/144 Tallgeese I
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG / HG 1/144 GN Arms

[Da Lin] HG / RG 1/144 GN Arms


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for 1/144 scale GN Arms
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM6.00

[Da Lin] Water Decal for RG 1/44 Banshee Gundam (Bronzing Gold Color Coating)

[Da Lin] RG Banshee Gundam Water Decal (Gold) (RG23)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Banshee Gundam Water Decal
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.00
img
SAVERM7.10

[Da Lin] Number Symbol Water Decal (Bronzing Gold Color Coating)

[Da Lin] Number Symbol Water Decal (Bronzing Green Color Coating)


This is a High Quality Water Decal by Dalin and not a sticker. 

- Suitable for any grade of Gunpla kits
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
img
SAVERM7.10

[Da Lin] Alphabet Symbol Water Decal C013 (Bronzing Gold Color Coating)

[Da Lin] Alphabet Symbol Water Decal (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and not a sticker. 

- Suitable for any grade of Gunpla kits
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Zeta Gundam

[Da Lin] Water Decal for RG 1/144 Zeta Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Zeta Gundam Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM3.10

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Gundam Astray Gold Frame Amatsu Mina
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM17.90
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Unicorn Gundam

[Da Lin] Water Decal for RG 1/144 Unicorn Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG Unicorn Gundam Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Sinanju

[Da Lin] Water Decal for RG 1/144 Sinanju


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG Sinanju Gundam Water Decal
-- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong 

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Full Armor Unicorn Gundam

[Da Lin] Water decal for RG 1/144 Full Armor Unicorn Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Full Armor Unicorn Gundam
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Gundam Astray Red Frame

[Da Lin] Water Decal for RG 1/144 Astray Red Frame

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Astray Red Frame
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00

Showing 301 - 330 of 502 products