Price Clear







Gundam Parts • CUSTOM PARTS

Showing 61 - 90 of 477 products

Bandai 1/144 , RG System Base 001 (White Color)
SAVERM16.00

Bandai 1/144 , RG System Base 001 (White Color)

This item is an accessory or set of accessories for Gundam models
Bandai brings even more goodies to the world of Gunpla with the addition of a new series of Gundam accessories called Builders Parts. This particular set is System Base #1, a great base to hold your 1/144 scale Gundam kits. The base is adjustable so it can accommodate wider kits and is molded all in one color.

  • Dimension: Height 17.3cm x Length 16.2cm x Width 10 cm
  • Weight: 300g

RM36.00
Star Soul Shock Burst Effects For Modelling Kits (Clear Yellow)
SAVERM10.90

Star Soul Shock Burst Effects For Modelling Kits (Clear Yellow)

Star Soul Shock Burst Effects For Modelling Kits 

The new version of Burst and Boom effect parts give you more freedom in setting up your action scenes.

Suitable for 1/144 and 1/100 scale figure / Gundam
5 color for selection for different scenes

- Clear Black 
- Clear Yellow
- Gray
- Red
- Yellow

RM19.00
Star Soul Shock Burst Effects For Modelling Kits (Clear Black)
SAVERM10.90

Star Soul Shock Burst Effects For Modelling Kits (Clear Black)

Star Soul Shock Burst Effects For Modelling Kits 

The new version of Burst and Boom effect parts give you more freedom in setting up your action scenes.

Suitable for 1/144 and 1/100 scale figure / Gundam
5 color for selection for different scenes

- Clear Black 
- Clear Yellow
- Gray
- Red
- Yellow

RM19.00
Unicorn Perfect Shield for HG & RG 1/144 [BLUE] (Armed Armor DE)
SAVERM30.00

Unicorn Perfect Shield for HG & RG 1/144 [BLUE] (Armed Armor DE)

(Kindly note that this is a NON-BANDAI product)

Unicorn Perfect Shield for HG & RG 1/144 [BLUE] (Armed Armor DE)

Brand: Effect Wing

Features:
- 2 x Armed Armor DE in a single package
- Able to transform into Unicorn mode or Destroy mode
- Suitable for HG & RG 1/144 scale kit
- Backpack connector (HG & RG) is included
- Phenex V-Fin is included
- The shield armor is molded based on RG model
- Great parts and colors separation
- 4 different frame colors available [Red, Blue, Green,Yellow] (each sold separately)

RM35.00
PG Strike Gundam Metal Blade Part
SAVERM14.90

PG Strike Gundam Metal Blade Part

  • PG Strike Gundam metal blade part
  • This unit consists of the metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.
  • Suitable for PG Strike Gundam, PG Strike Rouge Gundam, PG Strike Freedom Gundam

RM35.00
[Metal Part] Metal Thruster / Vents for Gundam Kit (S10, Silver) (2 Units)
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S10, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S10)

  • Specifications : Maximum diameter 8mm, Height 3mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM11.80
[Da Lin] Dragon VFin for PG Astray Blue Frame - Ver 1.5
SAVERM13.00

[Da Lin] Dragon VFin for PG Astray Blue Frame - Ver 1.5

Enhance your Astray Blue Frame with the special design Red Dragon Vfin

Brand : Dalin
Grade : PG
Scale : 1/60
Color : Blue

Suitable for Dragon VFin for Astray Blue Frame
Note : Gundam Kit is not included.

RM22.00
[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
[Metal Part] Joining Angle Detailing Enhancement Parts for MG 1/100 Model Kit
SAVERM4.60

[Metal Part] Joining Angle Detailing Enhancement Parts for MG 1/100 Model Kit

Joining Angle Detailing Enhancement Parts

- Maximum diameter : 9 mm 
- Part Long : 3.8 mm 
- Each set got 2 unit enhancement metal part 
- Total 4 sets per pack  

Suitable for Gundam Arm and Leg joining angle customization.

RM10.40
[Metal Part] Turbine / Turbcharger Screw - 6 units
SAVERM5.50

[Metal Part] Turbine / Turbcharger Screw - 6 units

Turbcharger Screw Metal Parts
- Maximum diameter : 6.0 mm 
- Part Long : 2.0 mm 
- Joint hole diameter : 2.0 mm
- Each set got 1 unit Turbcharger Screw 
- Total 6 sets per pack  

Suitable for Thruster and Vent customization.

RM6.50
[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
[Metal Part] Energy Cable Tubes Pipes Seamless Type (S Size, 3mm)
SAVERM4.00

[Metal Part] Energy Cable Tubes Pipes Seamless Type (S Size, 3mm)

3mm S size Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm

Package include
- 20 units Energy Tube Ring
- 1 x 12 cm Spring pipe
 
(This product not include any figure)

RM9.00
Metal Giant Heat Hawk for HG Zaku
SAVERM10.90

Metal Giant Heat Hawk for HG Zaku

Metal Giant Heat Hawk for HG Zaku


For HG 1/144 Scale Zaku (Black Tri-Star Custom)
Can pair with other HG 1/144 Zaku too 

RM19.00
[Metal Part] Metal Thruster / Vents for Gundam Kit (S7, Silver) (2 Units)
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S7, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S7)

  • Specifications : Maximum diameter 12mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
[Metal Part] Metal Thruster / Vents for Gundam Kit (S4, Silver, Red) (2 Units)
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S4, Silver, Red) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S4)

  • Specifications : Maximum diameter 9.2mm, Height 8.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
[Metal Part] Metal Thruster / Vents for Gundam Kit (S5, Silver) (2 Units)
SAVERM6.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (S5, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S5)

  • Specifications : Maximum diameter 9.2mm, Height 8.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM12.70
[Metal Part] Metal Thruster / Vents for Gundam Kit (S9, Silver, Red) (2 Units)
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S9, Silver, Red) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S7)

  • Specifications : Maximum diameter 12mm, Height 5mm, Joint hole Diameter 2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2mm)
2)Apply cement to ensure the center joint tightened

RM11.80
[Metal Part] Metal Thruster / Vents for Gundam Kit (S3, Silver) (2 Units)
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S3, Silver) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S2)

  • Specifications : Maximum diameter 9.0mm, Height 8.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal parts is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
[Metal Part] 50pcs - Armor Detail-up 2.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model
SAVERM2.40

[Metal Part] 50pcs - Armor Detail-up 2.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 2.5mm diameter

RM3.80
[Metal Part]  50pcs - Armor Detail-up 3.0mm Metal Silver Bead Ball Parts For MG HG Gundam Model
SAVERM2.40

[Metal Part] 50pcs - Armor Detail-up 3.0mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 3.0mm diameter

RM3.80
Customized Effect (Slashing Image Ver.) [Green]
SAVERM10.90

Customized Effect (Slashing Image Ver.) [Green]

Release Date: October 2020
Arrival Date: November 2020
  • Introducing the best effect for 1/144 scale!
  • Anyone can easily create original battle scenes! 
  • Slashing effect is now available in the customized effects series!
  • Produce the image of slashing. The color is green.
  • A set of effect parts and joint parts.
[Accessories]
Effect parts x1 set
Joint parts x1 set

RM19.00
MG 1/100 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel
SAVERM9.00

MG 1/100 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel

Brand: No Brand
Made in China
Item: MG 1/100 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel
Scale: 1/100

Box contains: 12 pcs effect parts

* Effect parts only, MG 1/100  Nu Gundam and Fin Funnel is NOT included

RM15.00
RG 1/144 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel
SAVERM8.00

RG 1/144 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel

Brand: No Brand
Made in China
Item: RG 1/144 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel
Scale: 1/144

Box contains: 12 pcs effect parts

* Effect parts only, RG 1/144  Nu Gundam and Fin Funnel is NOT included

RM10.00
Thunder Lightning Effect Parts and Damashii Action Base for modelling kits (Black Colour)
SAVERM11.90

Thunder Lightning Effect Parts and Damashii Action Base for modelling kits (Black Colour)

Thunder Lightning Effect Parts and Damashii Action Base for modelling kits (Black Colour)

RM24.00
[04] Bandai Customize Effect (Explosion Burst Image Ver.) [Grey]
SAVERM9.90

[04] Bandai Customize Effect (Explosion Burst Image Ver.) [Grey]

- Appropriate effects for 1/144 scale! Anyone can easily create original battle scenes!
- A set of a set of effect parts and a set of joint parts that express the explosion.

[accessories]
* Effect parts x 1 set
* Joint parts x 1 set

RM20.00
[DALIN] MG Shadow Cloak Type II - Blue Purple Color Expansion Unit Weapon Pack
SAVERM11.90

[DALIN] MG Shadow Cloak Type II - Blue Purple Color Expansion Unit Weapon Pack

Brand: DALIN (Third Party)
Scale: 1/100
Grade: MG 1/100

Contents:
- Each box contains only one unit of Shadow Cloak.
- Includes 3 main color of Shadow Cloak with White, Black and Blue Purple
- Each set of Shadow Cloak comes with 3 colors (Red, Blue and Grey) of replacement parts runners on Cloak thruster unit and center stripe
- 6 modes can be form to be Cloak Mode, Shield Mode, Attack Mode, Tactical Mode, Booster (Activate or Deactivate) Mode.
- Can combine few set of the Cloak to become full Cloak mode (2 sets) or heavy full cloak mode (4 sets) rather than just single cloak mode (1 set)
- Multiple adapter provided for shoulder and backpack make cloak compatible with mostly MG Seeds Gunpla.

Shoulder Adapter Suitable for:
  • BANDAI MG Aile Strike Gundam
  • BANDAI MG Astray Red Frame
  • BANDAI MG Astray Blue Frame 2nd Revise
  • BANDAI MG Blitz Gundam
  • BANDAI MG Sengoku Astray Gundam
  • BANDAI MG Buster Gundam
  • BANDAI MG Duel Assault Gundam 
  • DABAN 66 series MG gundam 

Backpack Adapter Suitable for:
  • BANDAI MG Aile Strike Gundam
  • BANDAI MG Astray Red Frame
  • BANDAI MG Astray Blue Frame 2nd Revise
  • BANDAI MG Blitz Gundam
  • BANDAI MG Sengoku Astray Gundam
  • BANDAI MG Eclipse Gundam
  • BANDAI MG Buster Gundam
  • BANDAI MG Duel Assault Gundam 
  • DABAN 66 series MG gundam 
Please do take note that this is a Non-Bandai Product.
MG 1/100 Gundam Astray Red Frame is sold separately & does not include in the package.
Contains only Shadow Cloak for MG 1/100 Gundam Astray Red Frame.

RM78.00
Bandai Option Parts Set Gunpla 12 (Large Railgun)
SAVERM15.90

Bandai Option Parts Set Gunpla 12 (Large Railgun)

The large railgun, long-range railgun, short barrel cannon, assault knife, etc. used in Mobile Suit Gundam Iron-Blooded Orphans are now available as an option parts set!

Soft material is used for the long-range railgun bandolier.
Short barrel cannon can be attached to various aircraft by using the included joint parts.
Comes with open hand parts for Gundam Vidal with facial expressions.

[Accessories]
Short barrel cannon x 2
Assault knife x 2
Long range rail gun x 1
Large rail gun x 1,
Open hand with expression for Gundam Vidar x 1
Joint parts x 1
Seal x 1

RM20.00
[Builder Parts] 1/144 MS Vernier 03
SAVERM17.40

[Builder Parts] 1/144 MS Vernier 03

- Official remodeling parts for gunpla with attention to detail. You can enjoy Gunpla even more by improving the details.
- Additional line-up for local warfare to official gunpla remodeling parts.
- Combine booster nozzles to enhance mobility.
- You can customize the booster part by freely combining two sizes of nozzles and bases.

Round base (large) x 2, round base (small) x 2, square base (large) x 2, square base (small) x 2, round vernier (large, 2 types) x 2, round A set of type verniers (small, 2 types) x 2, square verniers (large, 2 types) x 2, and square verniers (small, 2 types) x 2.

Molded product x 2, assembly manual x 1

RM24.50
PVC Pla Plate thinness 1.5 mm (20cm x 30cm) for Gunpla Model Modification or Customization
SAVERM2.50

PVC Pla Plate thinness 1.5 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVC Pla Plate for Gunpla Modification or Customization


Thinness : 1.5 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC "Pla Plates" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional "Pla Plate" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM4.00

Showing 61 - 90 of 477 products

Contact Us