Price Clear







Showing Gundam Model Kits + MOBILE SUIT GUNDAM product(s)

Showing 31 - 60 of 362 products

img
SAVERM127.40

MG 1/100 Musha Gundam MK-II

  • Musha Gundam redesigned by Katoki Hajime joins the MG series! 
  • Its distinguishing design of armor is finely re-created. 
  • It can hold dynamic poses with its plentiful movable parts. 
  • Gold and silver metallic color plating makes gorgeous impression. 
  • Two swords can be attached on both sides. Includes special weapons, Naginata and rifle. 
  • Runner x14, Foil sticker x1, Marking sticker, Gundam Decal x1, Mesh tube x1, Instruction Manual 

RM256.00
RM256.00 Add to cart
img
SAVERM240.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM420.00
RM420.00 Add to cart
img
SAVERM159.40

MG 1/100 MSN-02 Zeong

  • Pull-out hip and shoulder joints.
  • All joints are movable fingers 10.
  • Mono Movable nozzle head and ears.
  • Refer to the left and right arm stand.
  • Detachable head.

RM224.00
RM224.00 Add to cart
img
SAVERM206.70

MEGA SIZE 1/48 RX-78-2 Gundam

The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image

RM290.50
RM290.50 Add to cart
img
SAVERM74.70

HG 1/144 Gustav Karl Type 00

The Gustav Karl Type 00 from "Mobile Suit Gundam: Hathaway's Flash" is brought to life in Bandai's "HG (High Grade)" model-kit lineup, equipped with the latest gimmicks and a high range of motion! A movable axis is installed in the arm of the flexible shield on the left shoulder to allow for a variety of poses; the hip joint connection axes of both legs slide to promote bold leg movement. The beam rifle or bazooka can be mounted to its backpack, and the beam saber grip can be stored in the side armor. Order it for your own collection today!

[Includes]:

* Beam rifle
* Beam sabers (x2)
* Bazooka
* Interchangeable hands (x1 set)
* Stickers
* Marking stickers

RM135.00
RM135.00 Add to cart
img
SAVERM69.70

[002] RG 1/144 MS-06S Char Zaku II

The second release in Bandai's new "Real Grade" series is Char's Zaku II. Just like the first kit in the Real Grade line, the RX-78-2, the Zaku II packs an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features. The perfect counterpart to the RG Gundam, the Zaku II comes with the same kind of posable inner frame, piping, and enough markings to keep you busy for some time. Bandai continues to raise the bar.

RM98.00
img
SAVERM17.08

SD Ex-Standard RX-78-2 Gundam

SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.

RM18.90
img
SAVERM3.00

XYS HG 1/144 Efreet Custom [Metallic Gloss Injection] with Water Decal

XYS HG 1/144 Efreet Custom [Metallic Gloss Injection] with Water Decal

Brand : Third Party Brand XYS
Scale : 1/144
Grade : High Grade
Model : Efreet Custom
Water Decal : Included

Please note that this is Non-Bandai product

RM32.80
img
SAVERM78.80

1/144 RX-78F00/E Gundam (Glass Feather Equipment) Chemical Recycle Ver.

Bandai Spirits has revealed the GunPla model for the Gundam NEXT Future Pavilion event, running from April 13 to October 13, 2025. This venue will also home the newest 1/1 scale Gundam, the RX-78F00/E, an updated design of the moving Gundam that once stood in Yokohama.

This new version features glass panels on its shoulders, skirt, and leg armor, giving it a more "futuristic" look compared to the original RX-78-2 Gundam. The kit also includes the EX-001 Glass Feather Equipment, a unique addition to the RX-78F00/E model.

Product Features :
- 1/144 Scale
- Made of plastic
- Based on the Mobile Suit Gundam anime series
- Highly detailed

Contents :
- Pieces to build
- RX-78F00/E Gundam
- EX-001 G.L.R.S.S. Feather Unit
- Decal sheet
- Instructions

RM136.80
RM136.80 Add to cart
img
SAVERM34.90

[190] HG REVIVE 1/144 Guncannon

  • Through the time 35 years, and sends to all Gundam fans! HG is `Shinsei -REVIVE-`

  • Respond to a number of requests, REVIVE START! HGUC cancer Cannon appeared in the latest format!

  • REVIVE1: characteristic proportions
    By with the curve of was released HGUC series first series the gun Cannon] Shinsei `-REVIVE-` sharp in May 1999, the expression characteristic and massive proportions.

  • REVIVE2: can be bold poses
    You can expand the range of movement, elbow, in addition to knee is in double joint, and forward bending of the waist, also, such as heel angle adjustment realized. Anime Geki-chu can be just like the poses.

  • REVIVE3: the ease of set and pursue
    Parts adopt the cut easy wedge gate from the runner. Further consolidate parts for each part, by a runner arranged more easily assembled design.

  • REVIVE4: also included parts enhance
    Other beam rifle of the main equipment, comes with the open hand to be able to fire posture at low attitude (upward) parts.
Accessories: 240mm low recoil Cannon × set, beam rifle, grip hand (left and right), upward smack (left and right)

RM49.00
img
SAVERM97.10

MG 1/100 MSM-03 Gogg

  • MSM-03 Gogg (MG)
Finally, a Master-Grade kit of the MSM-03 Gogg, Zeon's mass production amphibious MS! Superb design and tooling by Bandai mean that your Gogg, when built, will be able to stand in just about any pose you might have seen in the Gundam anime! Bandai's inner frame system is highly jointed, with armor parts laid over top of a flexible inner skeleton, making those long arms more poseable than they look.

RM136.50
RM136.50 Add to cart
img
SAVERM42.30

[196] HG REVIVE 1/144 Gouf

  • REVIVE 7th is [Mobile Suit Gundam] than `blue giant star` love machine Gouf the line-up of!
  • FUN TO BUILD
  • `Adopt a wedge gate`. Easily removed from the runner, since the gate mark is hard to rest, clean finish!
  • BEST PROPOTION
  • REVIVE the Gouf contemporary proportions! Can reproduce a wide variety of action poses a wide range of motion.
  • OPTION
  • The main armament of Gouf also abundantly included!
  • Heat rod can be bent freely, a variety of poses is to be able to!
  • Heat saber can be stored in the shield.
  • Accessories: shield, heat rod, heat saber (left and right), grip hand (left and right), Weapons Possession (left and right), 75mm machine gun smack

RM59.50
img
SAVERM33.00

[Daban] 6641 MG 1/100 Jesta Canon (Clear Version)

[Daban] 1/100 Jesta (MG) Clear Version


Series: Gundam UC
Grade:Master Grade (MG)
Manufacturer: Daban
Scale:1/100

Type : Clear Version

Please note that this is not Bandai product

RM95.00
img
SAVERM12.40

FG 1/144 RX-78-2 Gundam

FG 1/144 RX-78-2 Gundam

Here's another of the same concept, Love how the modeler preserved the quality of this First Grade RX-78-2 Gundam model kit by painting its parts with original colors and left it on the runner. 

The presentation is also simple yet very nice and beautiful! wuld love to try this one with the older version.

***Runner is only in plain colour, displayed image is after painting***

RM17.50
img
SAVERM49.80

[206] HGUC 1/144 MS-08TX/S Efreet Schneid

- Zeon Remnest Army 's MS gets HG first!

- MS of Zeon Remnant Army appearing in [Gundam UC ep.4] made HG.
- The 14 heat darts equipped in various parts of the aircraft are removable and can reproduce battle scenes in the play.

- Precise reproduction of the characteristic head and chest shaping of ifrito MS.
- Mono Eye is movable independently.
- The power pipe secures the range of motion of the waist using dark room material.

-Point-
1.All 14 heat darts can be removed.
The handle part and the blade part reproduce color coding with different parts.

2.Heat · Dart reproduces both form of equipments and red heat state by molding color.

3.The giant buzz can move the grip part and take the shooting position.

Accessories
* Heat · Dart x 14
* Handheat heat · Dirt x 2
* Giant Buzz x 1

RM70.00
img
SAVERM24.90

FG 1/144 Zaku II & Char's Zaku II ( 2 in 1)

FG 1/144 Zaku II & Char's Zaku II ( 2 in 1)
The First Grade Model of the infamous Char and also a Grunt. This is a combo of FG 1/144 Zaku II & Char's Zaku II. -   

RM35.00
img
SAVERM124.50

MG 1/100 DOM Ver. 2020

From Mobile Suit Gundam, the popular MG 1/100 Dom has been upgraded with new molds and parts updates!
Improved exterior parts such as the waist and arms with a new mold. In particular, the shape of the arm has been modified so that the connection between the shoulder and forearm looks natural, and the joint structure of the elbow has also been redesigned.
A forward swing mechanism is mounted on the connection between the shoulder and the torso. The impressive pose of holding the giant buzz reduces the interference of each part and is decided smoothly.
A swing movable structure is newly adopted for the hip joint. In addition, the range of motion of the legs has been greatly expanded by adding movable axes to the thigh connection and updating the waist side armor.
The internal frame of the ankle has been changed to reproduce Dom\'s characteristic crouched pose.
A wealth of weapons such as Giant Buzz, Raketen Buzz, and Sturm Faust are included.

[Accessories]
  • Heat Saber x 1
  • Giant Buzz x 1
  • Raketen Buzz x 1
  • Sturm Faust x 2
  • 90mm Machine Gun x 1
  • Water slide decal x 1

RM175.00
RM175.00 Add to cart
img
SAVERM30.00

DABAN 6628 MG 1/100 RX-78-2 Ver 3.0 AAPE Camouflage Ver.

DABAN 6628 MG RX-78-2 Ver 3.0 AAPE Camouflage Ver.
Brand : Daban
Code : 6628 (AAPE)
Grade : MG
Scale : 1/100
Water Decal is included

Please note that this is not Bandai product

RM80.00
img
SAVERM79.70

HG 1/144 Bolinoak-Sammahn

  • From "Mobile Suit Z Gundam", "Borinoak Saman" is commercialized in HG with the latest gimmick!
  •  In addition to the movable gimmick of the claw part of the "dedicated shield", fine details such as the beam output part at the tip are also reproduced.
  •  By attaching effect parts to the grip stored on the back of the "dedicated shield", the "Beam Tomahawk" and "Beam Saber" can be reproduced.
  •  The shoulder armor is equipped with a deployment gimmick for reproducing the firing of the "Explosive Bullet Launcher".
  •  A head part that expresses the "illuminating state" of the radome is included. The characteristic shine of the radome is reproduced by replacement type by "reflection cut" and "sticker".
  •  In addition to the ball movement of the head, a movable axis is provided at the base of the neck, allowing it to swing back and forth widely.
  •  A pull-out mechanism is installed on the shoulder to expand the movable range of the arms.
  •  The backpack, which is the key to high mobility, can be moved individually by multiple ball joints.

[Accessories]
  •  Head part (illuminating state) x 1
  •  Effect parts x 1 set
  •  Hand parts x 1 set
  •  Sticker x 1

RM112.00
RM112.00 Add to cart
img
SAVERM50.00

Mecha Ark 1/100 Dominant Titan (Messer Comander) Plastic Model Kits

Mecha Ark 1/100 Dominant Titan Plastic Model Kits

Model Brand : Mecha Ark
Model Height : 25cm
Some parts are pre-painted

Please note that this is Non-Bandai product

RM168.00
RM168.00 Add to cart
img
SAVERM2.20

GaoGao HG 1/144 RX-78F Ex-001 G.L.R.S.S Feather Unit

HG 1/144 RX-78F Ex-001 G.L.A.S.S Feather Unit

Brand : GaoGao
Grade : High Grade
Scale : 1/144
Series : Mobile Suit Gundam

Please note that this is Non-Bandai product

RM35.80
img
SAVERM15.10

Chonker Fat Boy Model Magnetic Middle-aged RX-78-2 Assembly Model Kit with Base

Chonker Fat Boy Model Magnetic Middle-aged RX-78-2 Assembly Model Kit with Base

Brand : Chonker Fat Boy Model
Magnetic assembly model figurine representing a middle-aged, overweight character from the original series.
Decorated floor area with stickers and decals

Please note that this is Non-Bandai product

RM19.90
img
SAVERM16.00

GaoGao RG 1/144 RX-78-2 Gundam Ver.2.0

Third Party G 1/144 RX-78-2 Gundam Ver.2.0

Brand : GaoGao
Grade : RG
Scale : 1/144
Model : RX-78-2 Gundam Base Color

Include :
1. Action Base 5
2. Water Decal

Please note that this is Non-Bandai product

RM49.00
img
SAVERM78.80

1/144 RX-78F00/E Gundam (Glass Feather Equipment)

Bandai Spirits has revealed the GunPla model for the Gundam NEXT Future Pavilion event, running from April 13 to October 13, 2025. This venue will also home the newest 1/1 scale Gundam, the RX-78F00/E, an updated design of the moving Gundam that once stood in Yokohama.

This new version features glass panels on its shoulders, skirt, and leg armor, giving it a more "futuristic" look compared to the original RX-78-2 Gundam. The kit also includes the EX-001 Glass Feather Equipment, a unique addition to the RX-78F00/E model.

RM136.80
RM136.80 Add to cart
img
SAVERM29.90

Entry Grade 1/144 RX-78F00/E Gundam

Bandai Spirits commemorates the grand opening of the Gundam NEXT Future Pavilion in April 2025 with the launch of the RX-78F00/E Gundam as part of the Entry Grade 1/144 GunPla series. Designed for builders of all levels, this kit offers a seamless, tool-free assembly experience—no glue required—making it an ideal choice for both newcomers and seasoned GunPla enthusiasts.

For those looking to enhance their build, the kit is fully compatible with the separately sold Entry Grade 1/144 EX-001 Glass Feather Equipment. This optional add-on elevates the RX-78F00/E’s appearance with a bold and futuristic aesthetic, making it a standout addition to any collection.

RM42.00
img
SAVERM36.00

Panda Model 1/100 Gundam RX-78-2(RG 2.0 Ver.)

Panda Model 1/100 Gundam RX-78-2?RG 2.0 Ver.)

Brand : Panda

Scale : 1/100
Grade : RG 
Model : Gundam RX-78-2

This is a [Panda Model] brand RG Ver.20 but scale 1/100 RX-78-2 model.

Features: 
* Legs, hands, and waist can be puffed up
* Eyes are magnetically controlled and light-up

Includes: 
* Water decals
* Stickers
* Magnetic control light
* 1/144 to 1/100 action base adapter

Please note that this is non-Bandai product.

RM129.00
RM129.00 Add to cart
img
SAVERM10.00

GaoGao RG 1/144 RX-78F Ex-001 G.L.R.S.S Feather Unit Ver. 9RYU Plastic Model Kit

RG 1/144 RX-78F Ex-001 G.L.A.S.S Feather Unit

Brand : GaoGao
Grade : Real Grade RG
Version : 9RYU
Scale : 1/144
Series : Mobile Suit Gundam

Please note that this is Non-Bandai product

RM68.00
img
PO PriceRM320.00

ROBOT Spirits <SIDE MS> RMS-099 Rick Diaz ver. ANIME

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date : AUG 2024
Estimate arrival : SEP 2024

- P-O Price RM320
- Deposit RM50, Balance RM270
- We will inform to make balance RM270 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
A next-generation mass-produced machine jointly developed by AEGO and AE. The gray aircraft that solidifies the sides of the red MS is now available in ver. ANIME with new special effects.

This is a pre-production machine developed as a new MS by AEUGO, and piloted by veteran pilots such as Apoli and Roberto. Although its appearance has a mono-eye and body structure typical of a Zeon developer, it is technologically ahead of the Earth Federation Forces, including the use of lightweight Gundarium ? and the adoption of an all-sky monitor.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM260.00

ROBOT Spirits <SIDE MS> GAT-X105 Strike Gundam ver. ANIME

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM260
- Deposit RM50, Balance RM210
- We will inform to make balance RM210 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Mobile Suit Gundam SEED, which is celebrating its 20th anniversary, joins the ver. ANIME new series! Following the movable structure and expandability of effects cultivated in the series, "Strike Gundam" is revived in the Reiwa era!
New expressions are possible with unique structures such as elongation of the torso and bending of the legs.

The unique movable structure cultivated in the ANIME series allows for unprecedented action expression.
Aiming for a new standard with a form balance that balances the work and setting image.
First ever! Reproduce the head Vulcan with effect parts.
First ever! The back vernier is reproduced with effect parts. Accelerate active posing.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM120.00

[DIAN CHANG] MG 1/100 Zaku Alloy Skeleton Conversion Metal Parts

[PREORDER] [PREORDER] [PREORDER] 

Please read all the detail and condition before make order. 

Release Date : DEC 2022 
Estimate arrival : DEC 2022 

- Preorder Price RM120.00 
- Deposit RM20, Balance RM100.00 
- We will inform to make balance RM100.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

 ###############################################################
  • Metal Build Alloy Inner Frame for MG Zaku
  • Suitable for variety of MG size Zaku
  • The original Zaku design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Unicorn Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Request Stock

Showing 31 - 60 of 362 products