• Home
  • Showing Modelling Tools + TOOLKIT product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Modelling Tools + TOOLKIT product(s)

Showing 61 - 90 of 99 products

Quick View
img
SAVERM50.14

Modelling accessories Basic Tool (12 in 1) - Beginner Essential

Available Now.

Provides the most useful and essential tool for new gundam modellers at affordable price:
1.) A4 Cutting Mat
2.) Model Pen Knife (included with 15 knife pieces)
3.) PLATO Side Cutter 
4.) Sanding Stick
5.) Gundam Marker Panel Lining Pen
6.) Part Seperator
7.) Sanding block 
8.) Bend Tweezer
9.) Sharp Tweezer
10) Cleaning Brush
11.) Sand paper (set) 400/600/800/1000/1500
12.) Fine File 

RM39.80
RM39.80 Add to cart
Quick View
img
SAVERM10.00

Gaodi A4 cutting mat (22CM x 30CM)

Cutting mat for Pen Modding. Cut everything on this mat and your table will be fine. 
If you like pen beats -  this mat is also for you.
Dimensions: 20cm x 30cm x 3mm.

RM9.90
RM9.90 Add to cart
Quick View
img
SAVERM4.60

Plato / Pcafc Gundam Model Cutter

Plato / Pcafc brand Cutter for gundam model.

Cutter / Nipper for Plastic Model.


Spesifikasi:

- Warna Navy Blue

- Handle ergonomis dan anti licin

- Ada pegas sehingga tang mudah kembali terbuka

- Memotong komponen kecil dengan mudah

- Mata tang sangat tajam

- Non Packaging

RM11.30
RM11.30 Add to cart
Quick View
img
SAVERM182.00

GH-SPN-120 God Hand Ultimate Nipper Cutter 5.0 (Single-Edge)

Ultimate!!!Ultimate!!!!Ultimate!!!& Ultimate!!!!!!


As means, as the last point of reaching ultra-thin blade of a dedicated plastic nippers Plastic
This is the Ultimate Nipper. The highest rank of grade five sharpness.

- Sharpness is really good, characterized by breaks in the light force!
The reason for this is because the blade does not have only one.
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
Was not the case and say good or better sharpness both in the blade is in the same blade angle.
Nipper Ultimate 5.0 is cut with a knife and chopping board image.

Notes:
  • Ultimate 5.0 features and special nippers Plastic
  • With stopper to prevent the folding blade ,Added new feature
  • That put the stopper, and the blade edge is now not hit more than necessary.
  • A result, the break is eliminated concerned than ever before, you can use normally.
  • So good taste will be lost and disconnected when folding the parts to lose!
  • Can cut the parts for light and fatigue in the hand is hard work for a long time!
  • When the gate since it is less burr cut, reducing the processing time the gate!
Specifications
- single edged knife
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
The image of the cutting board and cut with a knife.
- Proven durability of the sharpness! !
There also consider the durability of our customers to focus on next sharpness degradation of sharpness.
Even after a test cut of the plastic stick of ?3mm of 10,000 made in our
Sharpness did not decline than other products!
The secret is because state-of-the-art technology to tool sharpening of our own.
- Will a hole in the blade and the cutting of iron wire. Please do not cut into the absolute.

- Product specification:
  • Length: 122mm
  • Weight: 60g
  • Blade length: 9mm about
  • The length of the grip: 83mm
------Coil spring spring
Light blue color of the grip-----
(To prevent out-of-function opens and spring too) with a stopper to prevent too open.
If you do not need the stopper, please remove the pin with pliers, etc.
-With the clash of blade protection
Part of the blade with a simple cap-
  • This product is the packaging blister pack
Simple explanation-papers
Made in Japan **MADE IN JAPAN

##One point advice on maintenance
  • Please give on a regular basis to oil the moving parts, such as sewing machine oil or KURE5-56.
Lubricating oil will be, it might be difficult to play.
  • After use, please I wiped clean from the blade. Can cause rust.

RM268.00
RM268.00 Add to cart
Quick View
img
SAVERM8.50

[MANWAH] Curved Anti-Static Tweezer

Man Wah Tweezers are the best tool for applying decals to your model kits! These allow you to apply many types of decals so you do not transfer any oils from your hands or other materials that might make the decals not stick. Also, this Tweezers is anti- static. 

RM9.40
RM9.40 Add to cart
Quick View
img
SAVERM8.50

[MANWAH] TST-10 Straight Anti-Static Tweezer

[MANWAH] TST-10 Straight Anti-Static Tweezer (MW-2135)


Tweezer that provide anti-statif feature. This Tweezer is comfortable for your daily use, reducing your hand fatigue. It is widely applicable for model kits assemble, applying water decal and etc.

RM9.40
RM9.40 Add to cart
Quick View
img
SAVERM13.50

[Manwah] Manual Hand Drill tool (0.2 - 0.8mm)

Features:

  • Made of Aluminium Alloy material,durable and solid, easy to use.
  • Precise, accurate and efficient.
  • Suitable for wood, plastic,rubber,model and others material to drilling hole.
  • Do not fit steel, iron, stone, such hard things.
  • Ideal for drilling wood,horn,amber,olive, walnut, plastic and other materials.

Package Included :
  • 7 types of drill head.
  • 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8 mm

RM28.40
RM28.40 Add to cart
Quick View
img
SAVERM4.00

[MANWAH] Stainless Steel Multi-purpose Modeling Scribe Template

Stainless Steel Multi-purpose Modeling Scribe Template


Model: - 4106 and 4107
Brand: ManWah
Content: 2 x Scribing templates 

  1. Thickness 0.1 mm
  2. 1:35 and 1:48 scale ruler
  3. Straight , curved saw Scribe Template

RM28.00
RM28.00 Add to cart
Quick View
img
SAVERM6.00

[Manwah] Stainless Steel Modeling Scriber Ruler For Marking and Lining

2 x Scribing templates for marking and positioning, can be used on the curved surface.


Model: - 4108 and 4109
Brand: ManWah
Content: 2 x Scribing templates 

RM26.00
RM26.00 Add to cart
Quick View
img

Tamiya Basic Tool Set

This set contains the basic, indispensable tools for model and craft work: A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all neatly packed in a handy plastic case.

RM120.00
RM120.00 Request Stock
Quick View
img
SAVERM71.60

Tamiya Craft Tool Sharp Pointed Side Cutter (74035)

With thinner, sharper-pointed blades - without losing any of the superb cutting edge - than Item 74001, these plastic model side cutters come into their own used upon sprues with finer parts and less clearance, such as details on ship models.
  • item code: 74035

RM168.00
RM168.00 Request Stock
Quick View
img
SAVERM4.90

9sea taiwan brand pen knife

  • Pen knife made in taiwan for cutting purposes
  • 12 unit pen blade included in the box.

RM13.00
RM13.00 Request Stock
Quick View
img
SAVERM13.10

A3 Taiwan cutting mat (30CM x 45CM)

- Taiwan brand A3 cutting mat (30 cm x 45cm) - Used to protect desk from scratch of cutter when building gunpla.

- Make in Taiwan

RM16.80
RM16.80 Request Stock
Quick View
img
SAVERM6.00

Tamiya Modeler Knife

This professional knife is ideal for precision tasks. Set includes Straight blade (3pcs.), Curved blade (2pcs.), and Chisel blade (2pcs.). The body features an elastomer grip and a metal chuck to secure the blade. Protective cap for the knife and a plastic spare blade case are also included.

RM49.00
RM49.00 Request Stock
Quick View
img
SAVERM54.72

Tamiya Craft Tools - Modeler Side Cutter - Gray (74093)

This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly. The cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time.

RM65.20
RM65.20 Request Stock
Quick View
img
SAVERM10.00

Tamiya Design Knife

Dimensions (Length x Diameter): 130mm x 9mm  
Number of Blades: 30 

RM45.00
RM45.00 Request Stock
Quick View
img
SAVERM19.95

Tamiya Modelers Side Cutter Alpha (Navy)

  • Sharp
  • High Durability
  • Made from high quality carbon steel and feature a comfortable grip

RM52.00
RM52.00 Request Stock
Quick View
img
SAVERM22.00

Mr Hobby Mr.Tools Mr.Nipper II Cutter MT104 ( Hobby Tools )

Entry level sprue cutter


Mr. Nipper is a dual-sided, all purpose, pre-lubricated cutting tool from Mr. Hobby. Featuring a spring-assisted reopening of the handles, and a comfortable curvature of the hand grips,  Mr. Nipper is going to be the cutting tool that makes cutting plastic feel rewarding. The blades are angled slightly upwards and are flat faced, giving you a guaranteed clean cut that gives a "snappy" response, rather than the nipper "chewing" through the gates. The added pressure also reduces the amount of discoloration where it was cut.

RM56.00
RM56.00 Request Stock
Quick View
img
SAVERM31.90

[Limitless] LS-100 Mini Electrodrill Drill, Polish, Grinding Kit

First, super fan electric drill suitable for mould processing repair burnish, is suitable for both aluminum plate, thin copper, board, plastic board, chipboard, printed circuit board, epoxy board, and can be used for drilling in polishing, cutting need components, polishing, etc., it is the most ideal production operations use tools. Ultra low voltage power source is you use the most security.
 
Second, super mini drill is imported motor as drive component, and equipped with high-quality wear-resisting out and grinding head. With reasonable structure long service life, high prices, etc. 

Highlights:

ABS plastic body and light weight for a long time work.
Quick change chuck device without any tools.
Replace different bits and chuck can drill hole of different diameter.
The supporting the use of the grinding wheel and grinding wheel for grinding and polishing cutting
Equipped with special blowing tool box small volume light weight easy to carry.

What's in the box:

1 X High-speed steel drill bit 5 (with a diameter not to 0.5; 1.0; 1.5; 2.5; 3.0)
1 X Chuck 5 (not the inside diameter of 0.5; 1.0; 1.5; 2.5; 3.0)
1 X Polished ceramic grinding wheel 4
1 X Off a grinding wheel
1 X Power adapter (output 12V 1A DC)

RM38.00
RM38.00 Request Stock
Quick View
img
SAVERM2.00

BANDAI SPIRITS Entry Nipper (Blue)

Bandai Spirits announces the release of their entry nippers in March 2019.Just like its name, this nipper is great for beginners! The nipper is also available in red, blue, and white version.

RM30.00
RM30.00 Request Stock
Quick View
img
SAVERM33.00

Bandai Spirits Build Up Nipper

-A comfortable nipper with detailed details has appeared so that you can assemble a plastic model of BANDAI SPIRITS without stress!

-The blade pursues a balance of hardness, material and angle, and is designed for plastic models.
-A rod-shaped spring is used for the contact point to realize a soft feeling of use in addition to the difficulty of detachment.
-High carbon steel (high carbon steel) is used for a well-balanced design of sharpness and durability.
-The grip material is soft. Realizes [not easily tired and easy to hold] in the shape of a polyhedron.
-A design that fits firmly in the palm, including bumps, non-slip grooves and grip end curves that catch the thumb.
-In order to eliminate the inconvenience caused by the over open of the nipper, the overlapping part of the blades is intentionally brought into contact to form an open preventing structure.

RM82.00
RM82.00 Request Stock
Quick View
img
SAVERM71.70

Tamiya Craft Tools Side Cutter for Plastic (74001)

The Tamiya Side Cutter for Plastic . This is a precision side cutter for removing parts from a plastic sprue without damaging the parts. Developed exclusively for plastic modeling, the impact resistant chrome vanadic alloy material was chosen for long life. High quality vinyl covering assures good grip.

Manufacturer: Tamiya
Model: 74001 Side Cutter for Plastic

RM138.00
RM138.00 Request Stock
Quick View
img
SAVERM9.90

Tamiya Craft Knife (74013)

Tamiya -  Craft Tools 74013 CRAFT KNIFE

This Tamiya craft knife is ideal for many sorts of cutting jobs and precision tasks.

The stanley blade is extremely sharp and has only 0.38mm thickness. The frame of the knife is made of strong steel. The handle is coverd with a high quality plastic and has a special rubberized grip for extra grip and comfort.

If perfect for many sorts of cutting jobs precise jobs like cutting out bodies of cleaning plastic parts. The stanley blade has 12 snap-off parts. Also a very handy blade snapper is included to refresh your blade easy and safely.

Strong steel frame
Rubberized plastic handle for more grip and comfort
Straight stanley
Blade ( 12 snap-off parts )
Blade snapper included
0.38mm thickness
Ideal for cutting out bodies and cleaning plastic parts

RM26.00
RM26.00 Request Stock
Quick View
img
SAVERM1.00

Mo Shi MS060 Hand Drill (0.8, 1.0, 1.5, 2.0, 2.5mm)

Mo Shi MS060 Hand Drill  (0.8, 1.0, 1.5, 2.0, 2.5mm)

Brand: Mo Shi (China Brand) 
Product Size: 9.2cm approximately
Item Code: MS060

Contents:
* It has handle and 5 different drill heads - 0.8mm, 1.0mm, 1.5mm, 2.0mm and 2.5mm
* It features with anti-slip handle.
* Easy to use
* Suitable for modeler to make decoration or enhance their models

RM28.00
RM28.00 Request Stock
Quick View
img
SAVERM4.00

Mo Shi Glue Cement Stand Plate for Tamiya MS 032

Mo Shi Glue Cement Stand Plate for Tamiya MS 032

RM9.90
RM9.90 Request Stock
Quick View
img
SAVERM24.90

Mo Shi MS-065 Single Blade Side Cutter Nipper Plier

Tool MS065 Single Blade Nipper


- MoShi MS065 single-edged nippers are pliers for plastic models with a blade on only one side.
- The blade is thinly finished, so it is ideal for separating precision parts from the gate.
- With stopper that prevents over-opening/breaking of blades.
- Blade cover is included


RM65.00
RM65.00 Request Stock
Quick View
img
SAVERM41.80

Multi Builders Case

This Multi Builders Case from Bandai helps you organize plastic model parts, tools and materials! Its clear color makes it easy to see what's inside; it's designed to make your modeling life easier with features such as non-slip grooves. The large case can store completed plastic models; the partition plates can be adjusted according to what you need to store, to keep your models safely separated. Two types of half-trays are built in, convenient for organizing tools and small parts. You can customize it with the partition plates to create compartments of just the right size for your needs. The back side of the lid can even be used as a work tray, and multiples of this case can be stacked, too. You'll wonder how you ever got along without it -- order yours today!

[Size]: Approximately 27cm x 19cm x 9.5cm


[Includes]:
- Storage case
- Partition plates (x1 set)

RM78.00
RM78.00 Request Stock
Quick View
img
SAVERM1.10

12 Piece Knife Blades for Modeling Pen Knife

  • 12 pieces of knife blade

RM2.80
RM2.80 Request Stock
Quick View
img
SAVERM1.00

Mo Shi MS-056 Mini Stainless Steel Handsaw (with two saw blades)

MS-056 Mini Handsaw (with two saw blades)


Brand : Mo Shi
Material : Stainless Steel
Come with 2 saw blades

RM12.90
RM12.90 Request Stock
Quick View
img
SAVERM7.00

Modeling Stainless Steel Thin Blade Side Cutters Nipper Plier Model Tool

Modeling Stainless Steel Thin Blade Side Cutters Nipper Plier

- The blade pursues a balance of hardness, material and angle, and is designed for plastic models.
- In addition, it can easily reach and cut off parts in narrow places as the blade is thin.

RM28.00
RM28.00 Request Stock

Showing 61 - 90 of 99 products