Price Clear







Showing Gundam Model Kits + MS GUNDAM 00 product(s)

Showing 1 - 30 of 188 products

img
SAVERM17.90

[322] SDBB 00 Raiser

  • Play value packed with a large number of the original gimmick.
  • To Raiser in Gundam + Raiser.
  • Saber mode of GN Sword II is reproduced in clear plastic.
  • It is equipped with an SD of original gimmick (Bird mode Fighter mode Rider mode) three
  • Width of play further expand!
  • Accessories: GN Sword II × 2, GN shield × 2, GN Sword II beam saber mode for parts × 2


RM42.00
img
SAVERM13.90

[334] SDBB 00 Gundam Exia Repair II

  • 00 mobile soldier Gundam final hero it is MS, it is soldier of BB, and solidification.  
  • An impressive development version is attached to the GN drive by the final episode.  
  • SD Gundam original gimmick. An original weapon bundles it. To an original weapon bringing parts only for [gandamuekushia] together.

RM34.00
img
SAVERM154.90

MG 1/100 GN-0000 Gundam 00 Raiser oo Raiser

  • MG Raiser, go!
  • Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  • Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  • This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  • Cockpit block features opening hatch. 
  • Raiser binder is equipped with opening gimmick.
  • Thanks to new molds, weapons such as Raiser Sword can be recreated.
  • Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  • 1/100 pilot figure (Standing, Sitting)

RM234.00
RM234.00 Add to cart
img
SAVERM10.98

SD Ex-Standard Gundam Exia

  • SD Ex-Standard GN-001 Gundam Exia
  • SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. 
  • Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.

RM25.00
img
SAVERM10.90

SD Ex-Standard 00 Gundam

  • SD Ex-Standard GN-0000 00 Gundam
  • The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.

RM25.00
img
SAVERM368.20

PG Gundam Exia (Without LED)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.


- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. It embodies the design arrangement and the internal frame structure led from it.

- Feel energy transmission 'Armor · Frame structure'
Considering the transmission structure of [GN particle], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, aerial action full of dynamism is possible.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.
- The regular version adopts a metallic seal and expresses the light emitting part by reflection of light.

- Accessories: GN sword x 1, GN shield x 1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x 1

RM710.00
RM710.00 Add to cart
img
SAVERM160.10

MG 1/100 Gundam Avalanche Exia

MG 1/100 Gundam Avalanche Exia


Package include
  • GN Long Blade
  • GN Short Blade
  • GN Shield
  • GN Beam Dagger x 2
  • GN Beam Saber x 2
Come with exclusive action base. 
This unit is release as [P-Bandai] product in Non-Asia Countries.

RM241.20
RM241.20 Add to cart
img
SAVERM82.00

[Hobby Star] MG 1/100 Gundam Astraea with water decal

[Hobby Star] MG 1/100 Gundam Astraea

- Made in China 
- Made by Hobby Star
- High Quality 
- MG 1/100 
- Height of Gunpla about 18 cm 
- This product come with Action Base 
- This product come with Dalin Water Decal  
- This product come without LED set 
- need to assembly yourself

RM178.00
RM178.00 Add to cart
img
SAVERM601.00

Bandai Tamashii Nations Metal Build gundam dynames repair III R3

[Content Package]
  • Main body - gundam dynames repair III x1
  • GN shield x 2
  • GN bazooka
  • Replacement wrist left and right 4 types each
  • Beam saber effect x 2
  • Beam saber grip x 2
  • Dedicated pedestal set
  • Rear thruster connection arm set
  • GN bazooka joint set
  • GN shield joint Set
  • GN shield cover set

RM999.00
RM999.00 Add to cart
img
SAVERM13.00

[GaoGao] HG 1/144 00-54 00 Raiser + GN Sword III

Third Party Brand HG 1/144 00-54 00 Raiser + GN Sword III

Brand: Third Party Brand
Scale: HG 1/144
Model: 00 Raiser + GN Sword III
Series: Mobile Suit Gundam 00

Please note that this is Not Bandai product

RM28.90
img
SAVERM8.92

[GaoGao] HG 1/144 00-48 Cherudim Fighter GNHW/A Gundam

Third Party Brand HG 1/144 00-48 Cherudim Fighter GNHW/A Gundam

Brand : Third Party Brand
Grade : High Grade
Scale :  1/144
Model: Cherudim Fighter GNHWIA Gundam
Series: Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM26.98
img
SAVERM7.00

[GaoGao] HG 1/144 00-61 00 Seven Sword Gundam

Third Party Brand HG 1/144 00-61 00 Seven Sword Gundam

Brand: GaoGao
Scale: HG 1/144
Model: 00 Seven Swordig Gundam
Series: Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM28.90
img
SAVERM13.00

[GaoGao] HG 1/144 00-51 Seravee Gundam GNHW/B

HG 1/144 00-51 Seravee Gundam GNHW/B


Brand: Third Party Brand
Scale : 1/144
Grade : High Grade
Model : Seravee Gundam GNHW/B
Series : Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM28.90
img
SAVERM10.00

Daban 6622R MG 1/100 OOQ 00 Qan[T] Gundam Quanta Limited Red Ver. (with Water Decal)

[Daban] MG 1/100 Gundam 00 Qan[T] (China Red Version)

Series: Gundam 00
Grade: Master Grade (MG)
Manufacturer: Daban
Scale: 1/100
Version: China Red Special Version

RM108.00
RM108.00 Add to cart
img
SAVERM3.00

GaoGao Gao Gao 00-64 HG 1/144 Gundam Fighter Avalanche Exia

HG 1/144 Gundam Fighter Avalanche Exia


Brand : Third Party Brand
Scale : 1/144
Grade : High Grade

Please not that this is NOT Bandai product

RM29.80
img
SAVERM26.00

Daban 00-09 1/100 Gundam Avalanche Exia

[Daban] 1/100 Gundam Avalanche Exia


Series: Mobile Suit Gundam 00V
Grade: NON-GRADE (NG)
Manufacturer: Daban
Scale:1/100

Please note that this is NOT Bandai product

RM60.00
img
SAVERM32.60

P-Bandai Exclusive: RG 1/144 Gundam 00 Qan[t] Full Saber

P-Bandai Exclusive: RG 1/144 Gundam 00 Qan[t] Full Saber

  • Estimate Arrival Late August 2017
  • This is a model kit, assembly needed
  • Pre-painted Plastic, no paint requires

RM217.40
img
SAVERM570.00

P-Bandai Exclusive: PG 1/60 Gundam 00 Raiser (Trans-am Mode)

P-Bandai Exclusive: PG 1/60 Gundam 00 Raiser [Trans-Am] - 2nd Reissue
  • Estimate delivery March 2019
[ACCESSORIES]
  • GN Micro Missile x 8
  • GN Beam Saber x 2
  • GN Vulcan
  • GN Shield x 1 [2 parts]
  • GN Sword II x 2
  • GN Sword III x 1
  • Particle Disruption Missile x 2
  • Hand Missile Unit x 2

RM1780.00
RM1780.00 Request Stock
img
SAVERM116.50

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Parts Set Conversion

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Part Conversion

Estimate arrival Late August 2017

Trans-am clear parts for PG 1/60 00 Raiser Trans-AM ver. , which is sold separately.
Clear orange, are provided for the antennas. Molds separated with clear pink, clear green, and clear red.
GN drive exterior parts of both shoulders are not included.  Armored exterior parts such as GN Sword â…¡, GN Sword â…¢, GN Shield, etc. are reproduced with clear parts.
PG 1/60 Special Stand sold with PG 1/60 00 Raiser Trans-AM ver. 
This kit is getting released to celebrate the 10th anniversary of Mobile Suit Gundam 00 anime series.

RM283.50
img
SAVERM61.90

NG 1/100 MSJ-06II-A Tieren Ground Type

  • A kit in 1/100 scale to appeal the mechanical detail the type Tieren the ground.
  • Incorporating a new shield is movable up and down shoulder, a more robust representation of the MS. On the surface of the tank aircraft
  • Enforcement of texturing to the image.
  • Step and use the aircraft surface, the bottom of shoes.
  • Comes with a new bazooka. Sensor can be mounted at the bottom of the box. The image of the structure parameters weapon
  • By dividing ー star, directing further reality real weapon. Dedicated to the arm can be mounted in the joint.
  • For the foot takes the mold from real weapons, represent a mold in the ground type. Mono
  • Is reproduced in clear plastic. Under the clear plastic mold is adopted aware of the camera.
  • Movable joint of the arm is aware of the double joint, can be reproduced to smooth the stance of each weapon. Holding the weapon or
  • Comes with a certain facial expression are indispensable to posing palm.

RM105.80
img
SAVERM27.90

P-Bandai Exclusive: RG 1/144 Gundam Exia (Trans-Am Mode)

P-Bandai Exclusive: RG 1/144 Gundam Exia (Trans-Am Mode)

Estimate Arrival: September 2017

RM170.10
img
SAVERM191.20

MG 1/100 Gundam 00 XN Raiser

MG 1/100 Gundam 00 XN Raiser


From the Mobile Suit Gundam 00V side story, the 00 XN Raiser joined the MG lineup! A combination of the 00 Gundam and the XN Raiser, the 00 XN Raiser comes equipped with a pair of GN Buster Sword III units that can be combined into one weapon! The 00 XN Raiser's arm pylons can open and close and can hold the GN Sword II and GN Beam Sword. It is also possible to mount the GN Beam Sword. Four types of battle styles can be reproduced for added display value. Switch between multiple battle modes instantly. One LED unit (green) can be mounted on the head. (2 LR41 batteries required; sold separately). Water-slide decals for added detailing are included. Set includes GN Buster Sword III, GN Sword II, GN Sword III, GN Beam Saber, and GN shield, LED unit, and instructions.

Accessories:
- GN Sword II x 2
- GN Buster Sword III x 1
- GN Beam Saber x 2
- GN Shield x 1 [2 parts]
- 0 Raiser x 1

RM288.00
img
SAVERM150.70

P-Bandai: MG 1/100 Deborah's Advanced GN-X

P-Bandai: MG 1/100 Deborah's Advanced GN-X


Release date: Nov, 2017
Estimate Delivery: Dec, 2017

Deborah's version of the Advanced GN-X is in the 1/100 Master Grade scale and functions as a fully articulated figure once complete. From Mobile Suit Gundam 00V, the Advanced GN-X is painted in a crimson red and comes equipped with an Advanced GN beam rifle, GN beam saber, and GN shield.

RM269.30
img
SAVERM23.90

[05] HG 1/144 MSJ-06II-A Tieren Ground Type (Land)

- MS mass production innovation Federation of humanity.

- In the hip using a double ball joint that allows moving up and down.
- Left and right arm can be mounted on the large-caliber rifle is armed only. The mechanism of poly shoulder caps
Used, can reproduce the various action poses and flexible.
- Each hand grip is an x corresponding to the left or right. x 1 left palm. Comes with a foil seal for detail color reproduction.
- Armed Includes: x 1 rifle arm, carbon blades x 1

RM48.00
img
SAVERM736.80

PG Gundam Exia (LED Lighting Model)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.

- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. Newly designed LED units, newly adopted light guiding materials, gimmick etc. are newly developed, as well as lighting effects when [GN particles] are accumulated and compressed, as well as embodying the design arrangement and the internal frame structure derived therefrom Approach to reproduce.

- The first item in the PG series [GUNPLA EVOLUTION PROJECT] 3rd item
EVOLUTION POINT is [LIGHT EMITTING (lighting effect)]
The color tone change due to the behavior of [GN particle] is expressed by three new elements [LUMINOUS ELEMENTS (Luminous Elements)].

- Feel energy transmission 'Armor -  · Frame structure'
Considering the particle transmission structure from [GN Drive], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

- Completely new 'LED unit' that changes its color with time
The newly designed LED unit expresses color change due to accumulation and compression of [GN particles]. It changes from [Green] in the active state to [Green -  · Blue] in the operation state, and changes to [Critical state] [Red].

- 'Guiding material' first adopted in Gundam Modeling History
In addition to clearing the conventional movement restrictions, soft silicon material which enables light production by LED, and newly adopted resin with high light guiding property etc. to diffuse the light as a whole.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, it is possible to perform aerial action full of lively dynamics as well as lighting effects.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.

- Accessories: GN sword x1, GN shield x1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x1

RM1180.00
RM1180.00 Request Stock
img
SAVERM47.60

[Daban] MG 1/100 Avalanche Exia Metal Build Alike Version

[Daban] MG 1/100 Avalanche Exia Metal Build Alike Version

  • Dedicated Action Base included
  • Brand : Daban
  • Brand Code : 8808
  • Scale : MG 1/100
Please note that this is not Bandai product

RM180.00
img
SAVERM239.00

MG 1/100 OO QAN[T]  (TRANS-AM MODE) [SPECIAL COATING]

MG 1/100 OO QAN[T]  (TRANS-AM MODE) [SPECIAL COATING]


From "Mobile Suit Gundam 00 - A wakening of the Trailblazer -",

Double-o'quanta of image which executed Transum appeared in master grade.
Reproduce the red shining airframe by using special coating such as gross injection, extra finish etc.

A water transfer type decal is also newly included.


- SPECIAL COATING

The image of the shining red aircraft at the time of activating Transum is reproduced with special coating. 
Gross injection is used for the pink color armor of the main body etc.
Pearl pink coating is applied to produce a shiny feeling.
The red armored part adopts extra finish processing with metallic feeling.

Metallic colors are used for joints and arms.
 
- DECAL
Adjusted color tone according to transom mode, various markings are newly included with water transfer type decal.

- GN Drive's lighting condition can be reproduced with LED unit (sold separately) mounted!

Attached armed: GN sword V / GN sword bit / GN shield

RM360.00
img
SAVERM288.80

MG 1/100 00 GUNDAM Seven Sword/G (TRANS-AM Mode) [Special Coating]

MG 1/100 00 GUNDAM SEVEN SWORD/G (TRANS-AM MODE) [SPECIAL COATING]


Side story variant of the popular MS 00 Gundam in a limited production Trans-Am variant of the Master Grade Gundam 00 Seven sword with stylish pearlescent red hue over its entire body. This MG kit encompasses total 7 of blades on the mobile suit. It's fully articulated and made with modern plastic.

RM430.00
img
SAVERM90.00

Special Coating : MG 1/100 00 Gundam Seven Sword/G (Third party paint job)

Special Coating : MG 1/100 00 Gundam Seven Sword/G


- Original Bandai product
- Special Coating Version
- Third party paint job

RM450.00
img
SAVERM109.40

MG 1/100 00 QAN[T] / Quanta Full Saber

MG 1/100 00 QAN[T] FULL SABER

- Faithfully reproduce the body shape of Double O Quanta Full Saber!
- Armor equipped with a variety of mechanisms `GN Sword IV Full Saber` is reproduced with new parts.
- The GN capacitor is mounted and the back part with the connection part with GN sword IV is reproduced by new modeling.
- A head antenna that imaged visuals drawn by Mr. Ebi Ogawa Kan Attack comes with new modeling.
- Marking seals are included, including markings for GN Sword IV Full Saber.
- Base for GN sword IV is included.

[accessories]
- GN Sword IV x 1
- GN Gamblade x 3
- GN sword V x 1
- GN sword bit
- GN shield x 1
- Display arm for arms x 1

[Product content]
- Molded article x 23
- Marking seal x 1
- Foil seal x 1
- Dry decal x 1
- Instruction manual x 1

RM220.00
In the year 2307 AD, fossil fuels have all but vanished and the distribution of energy is unbalanced. Humanity now relies on three large-scale solar power systems controlled by three multinational power blocs: the Union of Solar Energy and Free Nations (Union), the Human Reform League (HRL), and the Advanced European Union (AEU). With this nearly inexhaustible source of energy benefiting only these three powers and their allies, constant warfare erupted around the globe among minor countries for precious fuels and energy. Countries whose economy relied solely on the sale of fossil fuels were plunged into poverty and some even believed that the solar power system threatened the promised land of God, resulting in the twenty-year-long Solar Wars. 

Such a chaotic reality has lead to the creation of a paramilitary organization in possession of four highly advanced humanoid mobile suits called Gundams and a mysterious technology known as the GN Drive. They call themselves Celestial Being, and their goal is nothing less than the complete eradication of war through the use of war itself.

Showing 1 - 30 of 188 products