Price Clear







MS ZETA / ZZ GUNDAM

Showing 31 - 60 of 169 products

MG 1/100 Hyaku Shiki + Ballute Pack
SAVERM110.00

MG 1/100 Hyaku Shiki + Ballute Pack

  • A paintable Hyaku-Shiki! This fantastic master-grade kit comes with everything you need to build a supremely poseable Hyaku-Shiki, carrying the Ballute System. 
  • No gold plating means you can build the kit out of the box if you like (all the parts are coloured, naturally). 
  • Two teeny tiny 1/100 figures of Char I mean Quattro are included (one standing, one seated for the cockpit). Weight:860g

RM158.00
RM158.00 Add to cart
MG 1/100 FXA-05D/RX-178 Super Gundam
SAVERM112.10

MG 1/100 FXA-05D/RX-178 Super Gundam

Gundam MKII model unit. Coupled with parts for the G-Defender which lets you create an MG Super Gundam. Standing height almost 30cm! Almost all of the fins and hatches on the G-Defender move to allow various configurations, reveal missile bays, etc. Technical and historical notes Early during the Gryps Conflict, the Anti-Earth Union Group's newly-captured RX-178 Gundam Mark II mobile suit was soon outclassed by new variable-form mobile suits/mobile armor being developed by their Titans enemies. Although fairly impressive for its innovative new "movable frame" construction, the Gundam Mark II soon found itself left behind in terms of mobility, armor and firepower. To compensate for these shortcomings, the Anaheim Electronics Company developed a new weapon to enhance the Mark II's performance. Called the FXA-05D G-Defenser, this new space fighter-like unit was capable of docking with the Gundam Mark II. During cruise/flight mode, this form was called the G-Flyer. However, the Mark II could assume full control of the G-Defenser's weapons as a mobile suit, becoming what was commonly called the RX-178+FXA-05D Super Gundam. The Super Gundam sported an approximately 20% increase in speed/acceleration over the stand-alone Mark II, as well as provided the benefit of additional (and more effective) gundarium armor and the powerful long rifle and missile pods. These improvements allowed the Super Gundam to operate on a more equal footing with the high-performance variable mobile suits being fielded by the Titans at the time. Technical source:http://www.mahq.net Simple Instruction included in a box. Weight: 806g

RM157.50
RM157.50 Add to cart
MG 1/100 MSA-003 NEMO
SAVERM79.70

MG 1/100 MSA-003 NEMO

  • Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  • Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  • Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  • Dry transfer decals and clear Gundam stickers are included for markings. 
  • Simple instruction included in a box.

RM112.00
RM112.00 Add to cart
PG 1/60 Zeta Gundam
SAVERM400.90

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM700.00
RM700.00 Add to cart
MG 1/100 RX-178 Gundam Mk-II Ver.2.0 (TITANS)
SAVERM98.00

MG 1/100 RX-178 Gundam Mk-II Ver.2.0 (TITANS)

  • RX-178 Mk-II Ver.2.0 Titans
  • We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
  • Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
  • The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!

RM140.00
RM140.00 Add to cart
[054] HGUC 1/144 Asshimar
SAVERM54.80

[054] HGUC 1/144 Asshimar

The best thing about this disturbingly orange and green mecha is the fact that when it"e;s completed, it can transform from Mobile Suit mode to Mobile Armour mode. 

A custom display stand for showing it off is included as well. 
All parts snap together and are molded in colour; polycaps ensure smooth-moving joints. 
Foil stickers for details are included.

RM77.00
[055] HGUC 1/144 RMS-106 Hi-Zack (E.F.S.F. Color)
SAVERM29.90

[055] HGUC 1/144 RMS-106 Hi-Zack (E.F.S.F. Color)

[055] HGUC 1/144 RMS-106 Hi-Zack (E.F.S.F. Color)


Brand : Bandai
Scale : 1/144
Grade : High Grade

RM42.00
HG 1/144 PSYCHO GUNDAM Mk-II
SAVERM199.00

HG 1/144 PSYCHO GUNDAM Mk-II

  • The Psycho Gundam Mk-II, the largest in the series and the last of the main MS from Mobile Suit Z Gundam, has been made into a HG figure!!
  • Approximately 270mm tall. Impressive size.
  • Can transform into Mobile Fortress state.
  • Detailed color coding is reproduced by dividing the parts.
  • Includes Action Base 4 and Weapon Display Base. Allows you to display it as it appears in the movie.
  • Includes a half-destroyed head part based on a scene from the movie.

[Accessories]
  • 1 x Shield
  • 1 x Head (half-destroyed state)
  • 2 x Arm lead units
  • 1 x Reflector bit (stored state)
  • 1 x Reflector bit (deployed state)
  • 1 x Beam effect
  • 1 x Action Base 4
  • 1 x Weapon Display Base
  • 1 x Sticker

RM400.00
RM400.00 Add to cart
[214] [HGUC 1/144 Byarlant
SAVERM72.20

[214] [HGUC 1/144 Byarlant

HGUC 1/144 Byarlant


One of the last mobile suits from the Zeta Gundam series finally makes an appearance! Using new parts for the head and various armor sections, its color separation allows recreation of many fine detailed areas. 

Accessories:
- Beam  saber x 2

Product content:
- Runner x 15
- Foil sticker x 1
- Instruction manual x 1

RM101.50
RM101.50 Add to cart
METAL BUILD ZETA GUNDAM
SAVERM200.00

METAL BUILD ZETA GUNDAM

Introducing the latest alloy transformable finished product "METAL BUILD ZETA GUNDAM" by a group of talented creators.

The latest alloy transformable finished product "ZETA GUNDAM" has been released by a luxurious lineup of creators, with Naka Morifumi, who served as mechanical animation director for "Mobile Suit Gundam Z (Zeta) A New Translation" as styling advisor. In addition to the beautiful wave rider form reminiscent of the movie, experience the "new translation" ZETA GUNDAM unique to METAL BUILD, which incorporates many new attempts such as the telescopic/suspended beam rifle and the deployment of the calf thruster covers.

Height : Approx. 190mm
Material : PVC, ABS, Die-Cast

Content : 
- Main body
- 4 pairs of interchangeable hands
Beam saber blade × 2
- Beam saber bundle x 2
- Beam Rifle
- Shield
- Joint parts/auxiliary parts set
- Grenade cartridges × 2
- Replacement movable antenna
- Replacement non-movable antenna
?- Dedicated pedestal set

RM1800.00
RM1800.00 Add to cart
Third Party Brand HG 1/144 TR-6 Gundam (Woundwort)
SAVERM5.20

Third Party Brand HG 1/144 TR-6 Gundam (Woundwort)

Third Party Brand HG 1/144 TR-6 Gundam (Woundwort)


Brand : Third Party Brand
Grade : High Grade
Scale : 1/144
Model : Gundam TR-6

Please note that this is NON-Bandai product

RM29.80
Figure-rise Standard Ple Two
SAVERM159.20

Figure-rise Standard Ple Two

  • From Mobile Suit Gundam ZZ, Ple Two in his pilot suit has been recreated in Figure-rise Standard!
  • A helmet or headgear can be attached to the head. Facial parts
  • can also be rearranged. 
  • The helmet visor can be removed.
  • Two types of chest parts are included:  open collar and normal.
  • Facial expressions are reproduced with one type of tampo-printed part and two types of parts for water-transfer decals.

[Accessories]
  • Facial parts (tampo-printed) x 1 type
  • Facial parts (water-transfer decal) x 2 types
  • Helmet x 1
  • Head part with headgear x 1
  • Handgun x 1
  • Chest parts x 2 types
  • Hand parts x 1 set
  • Water-transfer decal x 1
  • Sticker x 1

RM68.40
MG 1/100 Full Armor ZZ Gundam Ver. Ka
SAVERM262.90

MG 1/100 Full Armor ZZ Gundam Ver. Ka

Hajime Katoki supervised Bandai's newest "Master Grade" Gunpla kit -- make way for the Full Armor ZZ Gundam, Ver. Ka, from "Mobile Suit Gundam ZZ"! The add-on armor can be rearranged to attach the Hyper Mega Cannon; you can also remove the add-on armor to recreate the Enhanced ZZ Gundam. The add-on armor parts have been carefully adjusted to fit the mech's main body, achieving proportions that don't give it a bulky impression. The Double Beam Rifle can be attached to the forearm, or held in the hands; the Hyper Mega Cannon can be attached to the backpack by replacing it with a missile pod. The forearm features a rolling mechanism which allows the add-on armor to move in tandem when raised horizontally to prevent interference. Order this truly impressive mech for your own collection today!

[Includes]:

Double Beam Rifle
Hyper Mega Cannon
Beam Saber (x2)
Shields (x2)
Fingertip parts (x1 set)
Waterslide decals
Stickers
Lead wire

RM420.00
RM420.00 Add to cart
HG 1/144 Galluss-J
SAVERM59.80

HG 1/144 Galluss-J

From Mobile Suit Gundam ZZ, the long-awaited Gallus J has been made into a HG model, recreating its characteristic form and armament!

Includes the energy gun, which is a weapon unique to Gallus J.
The head can be changed to change the line of sight
by replacing the mono-eye part. The shoulder missile hatch can be recreated in its deployed state by replacing parts.
The arms can be recreated in its arm punch state by replacing parts.
The beam saber grip can be suspended from the rear skirt.
The hip joint axis can be lowered to expand the range of motion of the legs.

[Accessories]
  • 1 x energy gun
  • 1 x mono-eye replacement part
  • 1 x replacement part for arm punch
  • 1 x fingertip part (left)
  • 1 x replacement part for shoulder missile hatch deployment
  • 1 x beam saber
  • 1 x sticker

RM90.00
PG 1/60 RX-178 Gundam MK-II (A.E.U.G) (Daban Non-Bandai)
SAVERM149.00

PG 1/60 RX-178 Gundam MK-II (A.E.U.G) (Daban Non-Bandai)

PG 1/60 RX-178 Gundam MK-II (A.E.U.G)

Brand : Daban 
Grade : Perfect Grade
Scale : 1/60

Please note that this is Non-Bandai product

RM250.00
RM250.00 Add to cart
The Robot Spirits <Side MS> RX-178 GUNDAM Mk-Ⅱ (A.E.U.G.) ver. A.N.I.M.E.
PO PriceRM330.00

The Robot Spirits <Side MS> RX-178 GUNDAM Mk-Ⅱ (A.E.U.G.) ver. A.N.I.M.E.

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2024
Estimate arrival : NOV 2024

- P-O Price RM330.00
- Deposit RM60.00, Balance RM270.00
- We will inform to make balance RM270.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
An ace machine that was repainted white after it was taken from the Titans and operated by Ego. The \"White Gundam,\" which demonstrated its performance without regret and became a symbol of Ego, appears on ver. A.N.I.M.E. with a variety of options!
A general-purpose mobile suit redesigned by the Titans from the RX-78. The two captured by Kamille Bidan and his crew, and the first unit brought in by Emma Sheen, were repainted white inside the Argama. One unit was used in the film, and the others were used as spare parts. In addition to Kamille and Emma, Quattro Bajeena also piloted it, and it achieved many victories in AEUG\'s operations.
Package: 
  • Main body
  • 4 pairs of interchangeable hands
  • Shield
  • Wrist parts storage deck
  • Hyper Bazooka
  • Vulcan Pod System
  • Beam Rifle
  • Spare E pack x 2
  • Spare bazooka cartridge
  • Bazooka cartridge cover
  • Joint set
  • Effect set

DEPOSIT: RM60.00
DEPOSIT: RM60.00 Request Stock
THE ROBOT SPIRITS &#60;SIDE MS&#62; MSN-00100 HYAKU-SHIKI ver. A.N.I.M.E.
PO PriceRM660.00

THE ROBOT SPIRITS <SIDE MS> MSN-00100 HYAKU-SHIKI ver. A.N.I.M.E.

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2025
Estimate arrival : SEP 2025

- P-O Price RM660.00
- Deposit RM150.00, Balance RM510.00
- We will inform to make balance RM510.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The golden mobile suit piloted by Quattro Bajeena, the ace of the A.E.U.G., comes to ver. A.N.I.M.E.! Four types of distinctive head sensors are included to reproduce various scenes.

A machine developed under the \"Zeta Project.\" It was originally planned as a transforming MS. Although structural defects were found, its performance in its mobile suit form was good, so it was rolled out as a non-transforming machine. It was used by Captain Quattro Bajeena during the Gryps Conflict.

  • Main body
  • 4 pairs of interchangeable hands
  • Hand storage deck
  • 3 interchangeable head sensor parts
  • Beam Rifle
  • Zaku Bazooka
  • Head antenna
  • Head antenna (spare)
  • Various joint sets
  • Various effects

DEPOSIT: RM150.00
DEPOSIT: RM150.00 Request Stock
Metal Structure Kaitai-Shou-Ki RX-178 Gundam Mk-II (A.E.U.G.)
PO PriceRM8000.00

Metal Structure Kaitai-Shou-Ki RX-178 Gundam Mk-II (A.E.U.G.)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JAN 2027
Estimate arrival : FEB 2027

- P-O Price RM8000.00
- Deposit RM2000.00, Balance RM6000.00
- We will inform to make balance RM6000.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

[Set Contents]:
- Main figure
- Beam Rifle
- Hyper Bazooka
- Vulcan Pod System
- Shield
- Spare E-Packs (x2)
- Joint parts for E-Packs
- Spare Bazooka cartridge
- Display stand set
- Various beam effect parts
- Figure set

DEPOSIT: RM2000.00
DEPOSIT: RM2000.00 Add to cart
HG 1/144 Hamma-Hamma
PO PriceRM140.00

HG 1/144 Hamma-Hamma

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAR 2027
Estimate arrival : APR 2027

- P-O Price RM140.00
- Deposit RM30.00, Balance RM110.00
- We will inform to make balance RM110.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The Hamma-Hamma from \"Mobile Suit Gundam ZZ\" is now available in Bandai\'s \"HG (High Grade)\" model-kit lineup!

The arm claw and mono eye are movable.
A pull-out mechanism has been adopted on the arms and hip joints to reproduce the movable gimmick.
The injection gimmick of the arm is reproduced with a lead wire.
The beam saber can be suspended on the shield, and it\'s equipped with a movable rail gimmick inspired by the idea of dropping a mine.

[Includes]:
* Beam saber (x1 set)
* Shield
* Arm extension parts (x1 set)
* Arm extension support pedestal (x1 set)
* Lead wire (x4)
* Stickers

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
Bandai Gundam 1/1700 EX-30 La-Vie-en Rose
SAVERM139.40

Bandai Gundam 1/1700 EX-30 La-Vie-en Rose

Amazing kit of the La-Vie-en Rose (French for "Life through rose-colored glasses") spaceship as seen in the Gundam ZZ and Gundam 0083: Stardust Memory OVA comes with snap fit assembly parts (some parts require cement) that are easy to assemble and a base and stands are included for holding the rose-shaped spaceship and both Albion (not included in this set) and Gundam Dendrobium Orchis (included) for display. 


Other in-scale Mobile Suits included in this kit are Quin-Mantha, four Gelgoogs, four GM Customs, and a Gundam GP03S. Quin-Mantha and Gundam GP03S are molded in white plastic while the other Mobile Suits are molded in yellow plastic. Paint is highly recommended to complete this kit particularly for the tiny 1/1700 scale Mobile Suits.

RM250.00
P-Bandai Exclusive: RG 1/144 MSZ-006-3 Zeta Gundam Unit 3 (Karaba's Custom)
SAVERM92.00

P-Bandai Exclusive: RG 1/144 MSZ-006-3 Zeta Gundam Unit 3 (Karaba's Custom)

P-Bandai Exclusive: RG 1/144 MSZ-006-3 Zeta Gundam Unit 3 (Karaba's Custom)

RM207.90
P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]
SAVERM110.00

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]

Reissue Date : Feb 2020
Estimate Delivery : Mar 2020

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM390.00
P-Bandai: HGUC 1/144 MSZ-006 Zeta Gundam (Wave Shooter Equipment Type)
SAVERM72.40

P-Bandai: HGUC 1/144 MSZ-006 Zeta Gundam (Wave Shooter Equipment Type)

P-Bandai: HGUC 1/144 MSZ-006 Zeta Gundam (Wave Shooter Equipment Type) 

RM127.60
P-Bandai: HGUC 1/144 Zssa
SAVERM78.20

P-Bandai: HGUC 1/144 Zssa

P-Bandai: HGUC 1/144 Zssa [REISSUE]

Release Date: August, 2018
Estimate Delivery Date: September, 2018

RM141.80
P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts
SAVERM30.00

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts


Kindly note that this product is only the add on parts for MG 1/100 Gundam TR-1 Hazel Custom. Which do not include the Gundam TR-1 Hazel Custom.

RM100.00
[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf
SAVERM46.00

[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf

[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf


- This is a Non-Bandai product.
- Master Grade 1/100 Scale.
- Included launching action base and water decal.
- Transformable kits.

The MSZ-006-3B Zeta Gundam 3B Type (also "Gray Zeta") is a variant of the MSZ-006 Zeta Gundam piloted by former Zeon ace Shin Matsunaga (codename "Gray Wolf"), who calls it "Buster", and appears in the Gundam Evolve 9 CGI episode where it engages in battle with the QRX-006 Geminus, assisted by two other Zeta units.

RM99.00
[219] HGUC 1/144 DIJEH
SAVERM52.30

[219] HGUC 1/144 DIJEH

The HGUC Dijeh, as seen in "Zeta Gundam," is a completely new-tool kit! It's fully posable after easy assembly, and comes with its Beam Rifle, Clay Bazooka and Beam Naginata, as well as hands to wield them with. The Clay Bazooka and Beam Rifle can be worn on the left and ride side of its binder respectively; the Clay Bazooka can also be equipped onto the weapons rack on its left shoulder.


Accessories:

- Beam Rifle
- Clay Bazooka
- Beam Naginata

RM73.50
P-Bandai : HGUC 1/144 Gundam TR-1 [Advanced Hazel] & Expansion Parts for Gundam TR-6
SAVERM30.00

P-Bandai : HGUC 1/144 Gundam TR-1 [Advanced Hazel] & Expansion Parts for Gundam TR-6

With additional new parts,

HG Gundam TR-1[Advanced Hazel], Attack !!

From [ADVANCE OF Z : The Flag of Titans],
"HG 1/144 Gundam TR-1[Advanced Hazel]" is released with expansion parts for "Gundam TR-6".
Joint parts have changed from ABS to KPS.

- Joint parts changed to KPS
     Joint parts changed to KPS to improve paint efficiency.

- Reproduce Hazel-Rah"second form" by combining it with an item sold separately
     Combine this product unassembled with an item sold separately to reproduce "RX-121-1+FF-X29A Gundam TR-1[Hazel-Rah]"second form".

1. HG Gundam TR-1[Advanced Hazel] & Expansion Parts Set For Gundam TR-6 "This product" "unassembled"
2. HG Gundam TR-1[Hazel Custom] & Expansion Parts Set For Gundam TR-6 "Sellout item of PREMIUM BANDAI"
3. HG G parts[Hrududu]"Combat Deployment Colors" x2 "Sellout item of PREMIUM BANDAI"


     * Some painting is required to reproduce the color.
     * An unassembled HG 1/144 Gundam TR-1[Advanced Hazel] is required to reproduce Gundam TR-1[Hazel-Rah] "second form".

-   Water slide decals of designated emblem included
Its characteristic emblem reproduced with water slide decals.

-    Includes newly molded "Expansion Parts Set For Gundam TR-6"
     Includes a set of expandable option parts for reproducing some of the TR series -  suit variations by combining it with "HG 1/144 Gundam TR-6" (sold separately).

Combine it with parts from the compatible kit to reproduce variations such as "RX-124 Gundam TR-6[GaplanII]" !
   
* An HG series 1/144 scale recommend kit (sold separately) is required to reproduce [RX-124 Gundam TR-6[GaplanII]].
* Some painting is required to reproduce the color of the TR series'suit variation.

**For more information about combinations of [GaplanII], please refer to the product image or the feature page.**


Weapons:  Beam Rifle / Beam Saber / Shield / Shield Booster
_______________________________________________________________________________

1/144 scale assembly plastic model
-No adhesives required for assembly
_______________________________________________________________________________

* The product in the picture is painted and is a prototype in development. Actual products may differ from the images.
 
(Notes)
  • This product cannot be found in model kits shops.
  • This product may be on sale in events or other projects held by our company.
  • Only a limited number of this product is available at 'PREMIUM BANDAI'. We apologize if we are out of stock on this product.
  • Please note that for this product, due to the number of produced units, we are limiting the quantity available in each order.
  • For this product, the shipping date is subject to change in some cases depending on application status and production circumstances,
Thank you for your understanding.
  • Product images are in development stage. They may differ from the actual products.
  • The product specifications are current as of February 2019. We ask for your understanding as they may be subject to change.

RM115.00
Blinding Model 1/72 Zeta Gundam Model Kit
SAVERM12.00

Blinding Model 1/72 Zeta Gundam Model Kit

HG Upsize 1/72 scale Zeta Gundam Model Kit


Brand : Blinding Model
Scale : 1/72
Grade : HG
Model : Zeta
Model Height : 30cm

Please note that this is Non-Bandai product 


RM98.00

Showing 31 - 60 of 169 products

Contact Us