Price Clear







Showing CEMENT product(s)

Showing 1 - 30 of 31 products

img
SAVERM15.98

Tamiya Cement 40ML For Plastic Model Kit

TAMIYA 87003 CEMENT GLUE 40ML FOR PLASTIC MODEL KIT CRAFT TOOLS

Glue parts together using Tamiya Cement. Apply a small amount of cement to one of the gluing surfaces and press the parts together. Leave for a while until cement has completely hardened.

Tips: Cement does not work on metal plated surfaces. Scratch off plating of the gluing surface using a knife

 

use of tweezer on cemented item

Tips: It is hard to get a good grip on small parts using just your fingers. This can often result in getting cement onto your fingers and dirtying the parts. Using tweezers helps solve this problem.

 

RM20.00
img
SAVERM16.10

Mr Hobby Mr. Cement S 40ML

  • Mr Cement S 40 ml
  • Attach parts together by pouring this cement into the space
  • Contains a brush.
  • Clear liquid.

RM15.80
img
SAVERM5.70

Tamiya Cement 20ML For Plastic Model Kit

TAMIYA CEMENT 20ML FOR PLASTIC MODEL KIT CRAFT TOOLS

Glue parts together using Tamiya Cement. Apply a small amount of cement to one of the gluing surfaces and press the parts together. Leave for a while until cement has completely hardened.

Tips: Cement does not work on metal plated surfaces. Scratch off plating of the gluing surface using a k-nife

 

use of tweezer on cemented item

Tips: It is hard to get a good grip on small parts using just your fingers. This can often result in getting cement onto your fingers and dirtying the parts. Using tweezers helps solve this problem.

 

RM14.20
img
SAVERM5.20

Tamiya Limonene Cement (Extra Thin Type)

  • Extra thin cement is very useful for plastic model assembly as it can be flowed into areas like small gaps between plastic parts and does not leave marks when dried. 
  • The bottle"e;s cap comes with a convenient brush. 
  • 1 bottle contains 40ML of cement.

RM29.80
img
SAVERM4.90

Tamiya Limonene Cement

? Easy to Use Cement ??This cement uses limonene extracted from citrus fruits and is very safe to use and comes with no unpleasant smells. It can be used for plastic model assembly as well as for cementing plastic plates and beams. Also, this cement has a strong initial adhesiveness not seen with other limonene cement items. The bottle"e;s cap comes with a convenient brush. 1 bottle contains 40ml.

RM19.00
img
SAVERM2.98

Tamiya Epoxy Cement 87100 Cement Glue (A+B, 10g) for Metal Plastic Model Craft Tools

This epoxy cement is perfect for attaching photo-etched and die-cast parts onto scale models. 

As it takes five minutes to harden, it provides you with ample time to finely adjust attachment positions before it sets. 
In addition, it does not whiten when dried and features high strength against shocks. Cement 5g, Hardening agent 5g.

RM33.00
img
SAVERM7.40

Tamiya Extra Thin Cement (Quick-Setting)

  • This new products has a quicker setting time than standard Tamiya Extra Thin Cement.
  • This cuts the amount of time used in constructing models, and has the advantage of a cleaner finish.
  • The bottle cap features a handy applicator brush.

RM26.50
img
SAVERM4.00

Tamiya Cement for ABS 40ml

Tamiya Cement for ABS.

- ABS Cement Glue for Plastic Models.
- This new cement is specially formulated for use with ABS plastic parts such as the masts in 1/350 scale ship model kits, which cannot be attached with normal plastic cement.
- The bottle cap has an applicator brush to ensure easy application.
- Contains 40ml.

RM18.80
img
SAVERM2.80

Tamiya CA Cement Quick Type

Tamiya CA cement provides rapid bonding for hard plastic, metal and synthetic rubber etc. The Tamiya quick type CA cement is useful for attaching tiny parts that require quick settlement. The unique dropper style applicator enables you to use one drop at a time. The package includes 2 x micro nozzles, applicator and plug-in CA tube. 

RM22.20
img
SAVERM15.60

Mr Hobby Mr.Cement Glue for Plastic Model 25ml [MC124]

Mr.CEMENT is appropriate for attachment between plastic parts in models (sterol resin plastics). 

Mr.CEMENT has a suitable adhesion and strong strength because it contains high-quality resins. Contains a brush.

RM9.40
img
SAVERM7.10

Mr Hobby Mr.Cement Deluxe for Plastic Model 40ml [MC127]

MR.CEMENT DELUXE
Mr.CEMENT is appropriate for attachment between plastic parts in models(sterol resin plastics). Mr.CEMENT has a suitable adhesion and strong strength because it contains high-quality resins. Contains a brush.

RM11.80
img
SAVERM13.50

Mr Hobby Mr.Cement SP for Plastic Model 40ml [MC131]

A new type of pour on adhesive. Compared with the former pour on type adhesive, drying speed has been dramatically improved and adhesive strength enhanced. Use this together with MC129 Mr. CEMENT S, which is suitable for gluing while fine-tuning positioning.

RM19.00
img
SAVERM11.20

Mr. Hobby Mr. Just One-Push (MJ-204) Adhesive Glue Gundam Instant Glue Plastic Model Glue

This is a cement.

GSI Creos' Mr. Just One Push is back with increased cure speed!

This strong instant glue can be used on plastic and metal models, and a single drop can be dispensed easily with a simple push on the container. The set time has been greatly shortened, and it has a tremendous effect on precise model production.

The adhesive body, special container, and a special tapered nozzle are included.

RM23.80
img
SAVERM13.50

Mr Hobby Mr.Cement SP for Plastic Model 40ml (Black Version) [MC132]

This is black version of  MC131 Mr.Cement SP.

The excess would be more visibleand easier to remove than ordinary super-fast adhesive solution, as thesolution is black, without damaging the surface.

RM19.00
img
SAVERM6.10

Tamiya CA Cement (Gel Type) (3g)

This gel type cement is easy to control, preventing mishaps such as it flowing into joints or over details where it is not wanted. 
A brief hardening time allows for last minute adjustments to attachment positions before it sets. Great for use on fine plastic and photo-etched parts.

Tube contents: 3g.

RM23.80
img
SAVERM8.00

Tamiya CA Cement Strong 3g

* This CA Cement (Strong) offers greater resistance against impacts compared to conventional CA cements. 

* Ideal for attaching photo-etched parts or parts with small cementing surfaces. 
* Tube features a screw-on cap which helps prevent nozzle blockage. 
* One tube contains 3g.

RM21.00
img
SAVERM10.90

Mr. Hobby Mr. Cement Limonene Pen Standard Type - PL01

  • PL01 and PL02 are pen type cement. It is the limonene type, so it has no irritating smell of solvent and you can use it without worrying about being a nuisance to others.
  • There is a standard type pen nib and extra thin type. Use them according to the parts you want to bond.

RM19.00
img
SAVERM10.90

Mr. Hobby Mr. Cement Limonene Pen Fine Type - PL02

  • PL01 and PL02 are pen type cement. It is the limonene type, so it has no irritating smell of solvent and you can use it without worrying about being a nuisance to others.There is a standard type pen nib and extra thin type. Use them according to the parts you want to bond.

RM19.00
img
SAVERM2.00

[CorMake] ABS Cement for Plastic Model (40ml) [MS-0021]

Cormake Cement for ABS.

- ABS Cement Glue for Plastic Models.
- This new cement is specially formulated for use with ABS plastic parts such as the masts in 1/350 scale ship model kits, which cannot be attached with normal plastic cement.
- The bottle cap has an applicator brush to ensure easy application.
- Contains 40ml.

RM9.90
img
SAVERM5.10

MoShi Model Tool MS-057 Model Part Joint Guard Glue Pen

  • The pen tip is 3.0mm.
  • This glue pen can be used to strengthen the joint parts, to avoid it becomes loosen and fall apart easily.
  • It can be used to glue etching metal parts too.
  • Easy and convenient
  • How To Use
    1. Apply the glue over the joint parts.
    2. Wait for 1-2 minutes for the glue to dry up and turn transparent.
    3. Once the glue is dried up, fits the parts with the model kit.

RM9.90
img
SAVERM0.90

DSPIAE BP-SP Joint Strengthening Pen

To fix the loosen joint.


Shake well before use, press the tip down to let the solutions flow out.

Apply a layer of solution on the ball joint, wait for 2-5 minutes or until the solution become translucent.

RM9.00
img
SAVERM4.00

Mr Hobby Mr Clear Glue New

The finished state of adhered parts becomes transparent, so this glue is optimum for gluing clear parts in plastic models. It can be used for handicraft or carpentry because it can adhere to cloth, leather or wood. Fixing time is approx. 5min., time until work can be done on the piece is approx. 60min. and within approx. 24 hours it will harden completely. When excess is exuded, it can be removed with lacquer thinner or nail polish remover if not yet hardened.

* This glue will stick;
Hard plastic, Soft vinyl chloride, Styrofoam, Plated parts, Polystyrene, ABS, Cloth, Felt, Leather, Glass, Stone, Wood, Synthetic rubber, Tile
* This glue will not stick;
Polyethylene, Polypropylene, Silicon resin, Fluorine resin, Precious metals

RM32.00
img
SAVERM4.30

Mr. Hobby Mr. Just Super Fast Type Adhesive Glue Gundam Instant Glue Plastic Model Glue

Hardening time is extremely short, so it’s best for immediate hardening.
Hardening speed is 4 times faster than that of MJ194 Just One Push.
It comes in a new bottle, which can be opened without using a pin.
(It cannot be used as a container for Just One Push.)

RM30.20
img
SAVERM4.30

Mr. Hobby Mr. Just Super Strong Type Adhesive Glue Gundam Instant Glue Plastic Model Glue

Instant adhesive with excellent shock resistance, most suitable for metal parts.
It is very effective when used for etching.


It comes in a new bottle, which can be opened without using a pin.
(It cannot be used as a container for Just One Push.)

RM30.20
img
SAVERM2.20

Mr. Hobby Mr. Just Brush Type (MJ197) Quick Drying Adhesive Glue Gundam Instant Glue Plastic Model Glue

Quick-drying adhesive in a bottle. Use the brush to precisely apply points and lines. 

The special bottle prevents spills and eliminates worries about unintended applications. 
The tip does not become hard and unusable like adhesive in tubes, and the aluminum storage pocket guarantees long-term preservation of the adhesive

RM23.80
img
SAVERM21.47

Tamiya Extra Thin Cement 40ML

  • Tamiya EXTRA THIN model cement is used to glue together plastic model kits that use polystyrene plastic. 
  • The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse.

RM26.50
img
SAVERM1.00

MODO N97 Ultimate Instant Glue 3.5ml

Modo N97 Ultimate Instant Glue
The Fastest,The Sticky,The Preceise
·New cap design with precision dispensary nozzle for greater control and accuracy.
·Lock and Enabled by one step.
·Patented bottle design for both easy application and secure storage.
·One-piece design for up-right storage

  For bonding and repairing small cracks on scale model,toy,jewelry,small furniturre,acrtlic sheet GK kit metal etc

Usage
Apply adhesive sparingly to one surface and then press parts together to achieve rapid bonding.

Can be bong
Impermeable,oil-free,dry,and clean surfaces such as hard plastic(PS,ABS,GK resin,PVC),wood,ceramic arcylic,glass,arcylic sheet,metal rubber,and leather.

Can not bond
soft plastic(PE,PP,PC),silicon resin,fluoro resin,wet or oily surfaces.

RM17.00
img
SAVERM3.00

Tamiya Craft Bond (87978) (20g)


Perfect for Papercraft Projects!

This water-based craft bond can be used for diorama creation and papercraft model assembly. It is compatible with paper, wood, fabric, leather, foam board, and styrofoam and can even attach them to other matericals such as metal and soft vinyl.

[Characteristics]

  • Compared to standard wood glues, this craft bond dries into a softer consistency to help provide shock protection. Also, it does not transfer excessive water to paper, so the joints remain wrinkle-free.
  • The nozzle features a thin tube to aid with application on small parts.
  • The craft bond dries transparently and thus can be used for attaching clear parts such as car headlights.

RM21.00
img
SAVERM2.00

[CorMake] Limonene Extra Thin Cement for Plastic Model (40ml) [MS-0025]

Limonene Extra Thin Cement is appropriate for attachment between plastic parts in models(sterol resin plastics). 

Limonene Extra Thin Cement has a suitable adhesion and strong strength because it contains high-quality resins. Contains a brush.

RM10.90
img
SAVERM2.00

[CorMake] Extra Thin Cement for Plastic Model (40ml) [MS-0023]

Extra Thin Cement is appropriate for attachment between plastic parts in models(sterol resin plastics). Extra Thin Cement has a suitable adhesion and strong strength because it contains high-quality resins. Contains a brush.

RM9.90

Showing 1 - 30 of 31 products