Price Clear







CHARACTERS

Showing 1 - 30 of 42 products

img
SAVERM40.90

[Star Wars] 1/12 Stormtrooper

Bandai's "Star Wars" lineup expands with the 1/12-scale Storm Trooper model kit! This standard-issue bucket head will come with multiple interchangeable hands, several weapons and a removable holster, as well as a display base. Fully posable after assembly, he'll be ready to whack his head into overhead doors, get beaten up by Ewoks, or escort Death Star prisoners to their doom as you choose! 

Buy several and build a whole platoon!

Bonus:
-E-11 blaster
-DLT-19 heavy blaster rifle
-Close combat pistol
-Display base x2
-Hand parts x6 types (weapon holding hand x2, flat hands x2, right fist, left point hand part)

RM96.00
img
SAVERM45.90

[Star Wars] 1/12 Darth Vader

Bandai makes a big splash in the 'Star Wars' world with its 1/12-scale Darth Vader model kit!  This version of the Dark Lord of the Sith depicts him as seen in 'The Empire Strikes Back,' and includes interchangeable hands, a removable helmet, a light saber hilt and a ready-for-battle light saber.  His cape is also jointed for dramatic poses! A base is included as well.  Come over to the Dark Side and place your order today!


  • Release Date: Nov 2014
  • In the battle of episode 5 of the Cloud City], and reproduced in 1/12 scale model Darth Vader was confronted by overwhelming force.
  • This is first Star Wars character plastic model kits!
  • Helmet: head cover removable helmet.
  • Water decal in use too.
  • Set include Two light saber x (handle state-light blade unfolded state), Dedicated display base x 1, (Weapon possession x 2, left fist x 1, smack x 2) 5 kinds of hand parts x 1
  • Height: approx 169mm.

  • This is pre-painted plastic model kits and require snap-fit assembly only.

    RM98.00
    img
    SAVERM43.10

    [Star Wars] 1/12 R2-D2 & R5-D4

    This item is an injection-plastic kit of a science-fiction/anime item.  

    Sassy sidekick R2-D2 and the Lars Homestead's own R5-D4 are joining Bandai's exciting lineup of model kits! This set includes both of the Skywalker droids in 1/12 scale, and an assortment of accessories.
    Please note that the photos shown are of the prototype version and may change before release.

    RM100.80
    RM100.80 Add to cart
    img
    SAVERM62.86

    [Star Wars] 1/12 C-3PO

    • The three-dimensional at 1/12 scale the typical protocol droid of Star Wars [C-3PO].
    • Re-examine the wide range of materials in order to reproduce the fine detail, condensed in the 1/12 scale.
    • Abdomen of cable will also use some soft material, reproduction.
    • The base comes with those of the image of the floor of the internal Death Star. Also possible to be linked with other products of the pedestal of sale.
    • Hand parts are included
    • [C-3PO] characteristic reproduce gold of the body at the commitment plating specifications. Right foot is reproduced in silver-plated.
    Accessories: face parts ? 2 types (normal type, damage type), damage eye parts, commlink ? 2, control bolt ? 2, control bolt mounting body parts, smack (left and right), commlink holding Possession ( left and right), plated arm parts for display (left and right), a dedicated display base

    RM147.00
    RM147.00 Add to cart
    img
    SAVERM53.89

    [Star Wars] 1/12 Boba Fett

    [Star Wars] 1/12 Boba Fett


    The most famous bounty hunter in the galaxy is now a 1/12 scale model kit from Bandai! It features the same detail and articulation that you've come to expect from the line,, and comes with a full array of accessories including interchangeable hand parts and a dedicated display base! Look for origin of shipment: only items shipped from within North America are being sold by authorized U.S. Retailers. The product box will have a Bluefin warning label, which is proof that you are purchasing an officially licensed band a I product, distributed by its sole and authorized distributor (Bluefin distribution) for the U.S. Markets. This product has been thoroughly tested for safety and meets all North American consumer product safety regulations. The affixed label with the Bluefin distribution logo also entitles the purchaser to product support assistance.

    Accessories: only display base, jet pack, blaster rifle, blaster pistol, hand part four (right weapon possession, grip hands × 2, left open hand)

    RM108.00
    RM108.00 Add to cart
    img
    SAVERM45.90

    [Star Wars] 1/12 R2-D2 & BB-8

    [Star Wars] 1/12 R2-D2 & BB-8
    [Accessory] 

    • Dedicated display base × 2 
    • BB-8 dedicated stand × 1 
    • R2-D2 Various arm parts × 7 types 
    • BB-8 various arm parts × 3 types 
    • BB-8 & R2-D2 storage box opening / closing re-use working parts × 1 type 
    • water transfer type decal × 1 
    • marking seal × 1

    RM98.00
    img
    SAVERM47.80

    [Star Wars] 1/12 Clone Troopers

    Episode 2 / Clone Attack, Episode 3 / Revenge of Sith "Clone Trooper" reproduced on 1/12 scale. 


    Two kinds of head parts are attached, and it is possible to produce the style of your choice. 

    Detailed verification of the material reproduces in detail, condensed in the 1/12 scale. 

    Head Parts Two head parts are attached and it is possible to assemble the Phase I / II clone trooper. 
    Macro binuclear can also be installed selectively. 

    Weapon : 2 type weapon included. Reproduce the action pose by moving the joint movable joint. Hand Parts Scene can be reproduced by various hand parts. Display base dedicated to display is included. Multiple connections can be made with joint parts. 

    Accessories : 
    Display Base Head x 2 (Phase I ~ 1, Phase II ~ 1) 
    DC-15 Blaster DC-15 Rifle Macro biochemical (Phase II Selected Parts) ~ 1 Various Hand Parts ~ 6 
    Hand ~ 2
    Flat ~ 2
    Fists ~ 2

    RM96.00
    img
    SAVERM53.70

    [Star Wars] 1/12 Death Trooper

    Death troopers were an elite variant of the Galactic Empire's stormtroopers. They served as protective details and bodyguards for important Imperial officers and members of the Tarkin Initiative. They wore black suits of armor and specialized helmets that scrambled verbal communications. Death troopers were trained in unarmed combat, heavy weapons, and sniping. Specializing in commando missions, the troopers were experts at covering their tracks, leaving little evidence of their missions.

    Bandai 1/12 scale Death Trooper is released now.
    Includes multiple hands and weapons. 
    These are highly detailed, snap kits.

    RM108.00
    RM108.00 Add to cart
    img
    SAVERM89.60

    [Star Wars] 1/12 General Grievous

    Dreams do come true, my friends. Bandai just announced General Grievous for their Star Wars model kit line. And I couldn -  ??t be happier.


    And there are several reasons for my happiness, besides getting to add a new Star Wars figure to my 1/12 scale display.

    One, the model kit figure line is continuing. It -  ??s been a while since a new figure, as in an all-new kit, has been announced. I was afraid the Battle Droid reissue and the hologram Darth Vader was signaling the demise of one of my favorite lines.

    Two, it -  ??s Grievous. In the model kit line. Sure, we -  ??ve seen teases in the S.H. Figuarts line but I was hoping for a model because they are bigger. That -  ??s it. Sure, the detailing will have to be painted and it may feel just slightly more flimsy than an actual action figure, but the good General will end up more imposing on the shelf after being put together. Don -  ??t get me wrong, I -  ??m still hoping for an SHF, but I -  ??m downright giddy at the thought of building Grievous.

    RM180.00
    RM180.00 Add to cart
    img
    SAVERM43.80

    [Star Wars] 1/12 R5-J2

    R5-J2 is an Imperial maintenance droid stationed aboard the Death Star II that provides support and repairs. It includes a display base plus additional arm accessories for R2-D2.

    Product Features:
    - 3.60 inches (9.15cm)
    - Made of plastic
    - From the Star Wars franchise
    - Additional accessories for R2-D2
    - R2-D2 not included

    Box Contents:
    - 5 Runners
    - Stickers
    - Additional arm accessories (for R2-D2)

    RM76.00
    img
    SAVERM4.00

    [Star Wars] 1/12 R2-Q5

    R2-Q5 is an Imperial maintenance droid stationed aboard the Death Star that provides support and repairs. It includes a display base plus additional accessories for R2-D2, including computer interphase arm parts as well as the drink arm parts.

    Product Features:
    - 3.60 inches (9.15cm)
    - Made of plastic
    - From the Star Wars franchise
    - Additional accessories for R2-D2
    - R2-D2 not included

    Box Contents:
    - 5 Runners
    - Stickers
    - Computer interphase arm parts (for R2-D2)
    - Drink arm parts (for R2-D2)

    RM76.00
    img
    SAVERM14.00

    [Star Wars] 1/12 R4-M9 - New Hope

    After the opening of "Star Wars Episode 4 / New Hope", Astromek Droid of the Imperial Army detained by Brockade Runner comes up! 
    -   We reproduce the body faithfully with detail by parts division and each part marking seal which imaged setting color. 
    -  Dedicated display base is attached. 

    【Accessories】 
    -  Display base x 1 

    [Item content] 
    -   Sprue x 6 
    -   Marking seal x 1 
    -   Manual x 1

      RM76.00
      img
      SAVERM54.70

      [Star Wars] 1/12 The Mandalorian (Beskar Armor)

      • From the first live-action drama series Mandalorian of Star Wars, the main character Mandalorian is made into a plastic model on a 1/12 scale with various accessories!
      • Normal color that is easy to process such as painting.
      [Accessories]
      •  Dedicated blaster x 2 types
      •  Spear x 1
      •  Dark saver x 1
      •  Cloak x 1
      •  Hand parts Gun handle (right), rifle handle (right), weapon handle (right), facial expression hand ( Left)
      •  Joint parts x 1 set
      •  Dedicated display base x 1

      RM125.00
      RM125.00 Add to cart
      img
      SAVERM87.50

      [Star Wars] 1/12 The Mandalorian (Beskar Armor) - Silver/Metallic Coating Ver.

      • From the first live-action drama series Mandalorian of Star Wars, the main character Mandalorian is made into a plastic model on a 1/12 scale with various accessories!
      • Beskar armor with a characteristic silver color is reproduced with a solid silver coating.
      [Accessories]
      •  Dedicated blaster x 2 types
      •  Spear x 1
      •  Dark saver x 1
      •  Cloak x 1
      •  Hand parts Gun handle (right), rifle handle (right), weapon handle (right), facial expression hand ( Left)
      •  Joint parts x 1 set
      •  Dedicated display base x 1

      RM200.00
      RM200.00 Add to cart
      img
      SAVERM59.70

      [STAR WARS] 1/12 The Mandalorian BOBA Fett

      • Boba Fett from "The Mandalorian", the first live-action drama series from "Star Wars"!
      • Impressive suit details and colors have been updated by reproducing the settings with new modeling parts and adopting molding colors that match the image in the play.
      • We adopt cloth material for muffler and waist cloth part and pursue realistic texture.
      • Unpainted head parts that can reproduce the state of the real face are included.
      • In addition to the weapons that appear in the play such as blaster rifle and blaster pistol, hand parts and a special pedestal are included.
      • [Accessories]
        • Blaster rifle x 1
        • Blaster pistol x 1
        • Muffler, waist cloth x 1
        • Unpainted head parts x 1
        • Hand parts x 1
        • Joint parts x 1
        • Dedicated display base x 1
        • Seal × 1

      RM120.00
      RM120.00 Add to cart
      img
      SAVERM47.80

      1/4 GROGU

      From "Star Wars", a 1/4 scale plastic model of the popular character "Grogu" who travels with "The Mandalorian"!
      ? Overall height is about 100mm. In addition to the "normal face", three facial expressions and hanging ear parts are also included, allowing you to express the expressive Grogu by replacing them.
      ? The included hovering plum (1/12 scale) reproduces the opening and closing of the cover by replacing parts. A clear pedestal is also included to create a floating feeling.
      ? A 1/12 scale Grogu that can be boarded on the hovering plum is also included. The image in the play can be reproduced by lining up with the separately sold "1/12 The Mandalorian (Vesker Armor)".

      ?accessories?
      ? Facial expression parts (for 1/4 Grogu) x 4 types
      ? Ear parts (for 1/4 Grogu) x 2 types
      ? Hovering plum (for 1/12 Grogu) x 1
      ? Hovering plum cover x 1
      ? Display stand for hovering plum x 1
      ? Sticker x 1

      RM102.00
      RM102.00 Add to cart
      img
      SAVERM59.89

      [Star Wars] 1/12 Sand Trooper

      [Star Wars] 1/12 Sand Trooper

      • Accessories: only display base, backpack, shoulder pads, small pack x? 3, T-21 fire formula light blaster, E-11 blaster rifle, DLT-19 heavy blaster rifle, SE-14r short-range combat pistol, weapon possession x? 2, smack x? 2, left pointing hand, right hand grip

      RM102.00
      img
      SAVERM45.90

      [Star Wars] 1/12 First Order Stormtrooper

      Bandai are continuing their 1/12th figure range with the new First Order storm trooper. The snap together kit can be built up unpainted but we think the traditional glue and paint method will make this into a cool looking model - Don't know too much about the First order?


      In the years that followed the battle of Endor and the fall of the Galactic Empire, the break-off movement called the "First Order" emerged, inspired by the principals of the fallen government and led by former officers of the Empire.

      The First Order was active approximately thirty years after the Battle of Endor, and fought against the Resistance. Just like the Empire - the First Order employed the use of stormtroopers, including variants such as flametroopers and snowtroopers.

      The new model storm trooper featured in "The Force Awakens" has a slightly slipstreamed body armour look. And this model can be posed in most positions for you to use wherever you want. 

      The new Bandai kit in 1/12th scale comes with a bunch of optional parts, a small display base that can be joined to another trooper to make your own army in perfect ranks!

      Accessories that come with this kit :
      - Exclusive display base x 1
      - Blaster x 1
      - Tonfa shield x1
      - Water transfer type decal x 1
      - Stickers x 1

      The six different hand parts left fist and right fist weapon holding both hands & two pointing hands left and right.

      RM98.00
      img
      SAVERM79.60

      [Star Wars] 1/12 Captain Phasma

      [Star Wars] 1/12 Captain Phasma 

      [Accessory] 
      Dedicated display base x 1 
      Fuzzma exclusive blaster x 1 
      Hand parts x 6 types (weapon possession x 2 · flat hands x 2 · fists x 2) 
      cloak x 2 species (molded cloak x 1 · cloth cloak x 1) 
      Line seal for cloak x 1 
      water transfer type decal x 1 
      marking seal x 1

      RM160.00
      img
      SAVERM69.70

      [STAR WARS] 1/12 Luke Skywalker Storm Trooper Ver.

      Bandai Hobby Division gives off a human face representation by the "Star Wars" plastic model series of NEXT MOVE "Triaxial Jet Finish" 

      New technology, the precision of conventional plastic model fusion! 

      Realize the print to a three-direction by the jig controlled by the development of ... dedicated jig and Triaxial Jet Finish. The molded article alone is obtained did not shadow sense of marvel of new technologies to reproduce the vitality of the surface feeling and look of the skin, the conventional ink jet printing Quality of dimensions are different, stereoscopic the expression of actors and vividly It has been reproduced. 

      Develop and introduce new technology to surpass the figure painting techniques of the past! Products that make up the Luke Skywalker who infiltrated the Death Star in the movie of "Star Wars Episode 4 / A New Hope" in the "plastic model"! Storm Trooper helmet parts is also included!

      Luke Skywalker in Death in the star was used to jump to the opposite side of the passage had the Princess Leia, the shape of the grappling hook that is attached to the rear belt reproduction! 

      Height reproduction for parts also included, height difference between the Han Solo also can be reproduced! 

      Accessories:

      - Luke Skywalker Facial Part x 1
      - Stromtrooper Helmet x 1
      - Display Base x 1
      - E-11 Blaster x 1
      - DTL-19 Heavy Blaster Rifle x 1
      - SE-14r  Short Range Combat Pistol x 1
      - Hand parts x 6
      - Water decal x 1
      - Marking stick x 1
      - Instruction Manual x 1

      RM110.00
      img
      SAVERM292.60

      [Star Wars] 1/2 BB-8 (Gloss Finish)

      YES, we finally get a big BB-8! This beautiful kit utilizes glass-finished plastic for a shiny look right out of the box, and all the minor details of BB-8's surface have been faithfully reproduced. Multiple arms are included so you can display him shocking his enemies or approving of his friends, and a red LED unit is also included to reproduce his illuminated camera eye so you can display him just like any scene in the movie! A display base is included so he doesn't roll away, so you can proudly display this foot-tall cutie anywhere you'd like!

      Height:
      33.5 cm

      Kit includes:
      • Dedicated display base
      • 2 x arm type (zapper, burner)
      • Utility arm parts
      • Memory Chip Parts
      • Effect part x 2 (electricity, fire)
      • Red LED Unit

      RM546.00
      img
      SAVERM52.60

      [Star Wars] 1/12 R2-D2 (Rocket Booster Ver.)

      [Star Wars] 1/12 R2-D2 (Rocket Booster Ver.)

      R2-D2 is making its appearance to the Star Wars 1/12 character model kit collection with all new gimmicks and functions! A new series called the "Droid Collection" will feature each droid with a specific "droid accessory" compatible with this R2-D2 kit.

      Lift R2-D2's head with the Hydraulic lifting device or display R2-D2 in a floating state using the included base. 

      Product Features:
      - 4 inches (10.16cm)
      - Made of plastic
      - All new gimmicks and functions
      - Compatible with other kits in the Droid Collection
      - Lift R2-D2's head with the Hydraulic lifting device 

      Box Contents:
      - 6 Runners
      - Brook's propeller rocket booster
      - Hydraulic head lifting device
      - Electronic bar
      - Oil application arm
      - Light saber
      - 2 Tool stands
      - Display base
      - Marking sticker sheet 


      RM79.20
      img
      SAVERM47.80

      [Star Wars] 1/12 R4-I9

      [Star Wars] 1/12 R4-I9


      R4-I9 is making its appearance to the Star Wars 1/12 character model kit collection! A new series called the "Droid Collection" will feature each droid with a specific "droid accessory" compatible with the R2-D2 kit.

      This set comes with a waiter tool set equipment for R2-D2. 

      Product Features:
      - 4 Inches (10.16cm)
      - Made of plastic
      - Compatible with the R2-D2 kit
      - Includes waiter tool set equipment for R2-D2

      Box Contents:
      - 6 Runners
      - Waiter tool set equipment for R2-D2
      - Display base
      - Marking sticker sheet

      RM72.00
      img
      SAVERM71.60

      [Star Wars] 1/12 Darth Vader (Return of Jedi)

      Darth Vader returns to the 1/12 line with a new mask off version. This model utilizes the Triaxial Jet Finish and by popular demand has a new cape recreated with soft plastic to increase poseability. It comes with an alternate right arm with the hand cut off to reflect the fierce fight with Luke Skywalker. The chest parts have been recreated in a new molded design as well. This is the ultimate Darth Vader model kit!


      Product Features

      • 6 inches (15.24cm)
      • Made of plastic
      • From Return of the Jedi
      • Utilizes the Triaxial Jet Finish
      • Cape recreated with soft plastic to increase poseability

      Box Contents

      • 9 Runners
      • 2 Face parts
      • 2 Cape parts
      • Cut off right hand
      • 2 Chest panels
      • Lightsaber
      • Lightsaber hilt
      • 5 Hands
      • Stickers Decals

      RM144.00
      img
      SAVERM39.80

      [Star Wars] 1/12 R2-Q2

      Astromek droid "R2-Q2" appearing in "Star Wars Episode 4 / New Hope" appears in the droid series!
      -   We reproduce characteristic body color, detail with parts division and each part marking seal faithfully.
      -   Dedicated display base is attached.

      [INCLUDED ACCESSORIES]
      -   Dedicated display base x 1

      [CONTENTS]
      -   Molded parts x 5
      -   Kinousseal x 1
      -   Instruction manual x 1

      RM80.00
      img
      SAVERM48.80

      [Star Wars] 1/12 Shadow StormTrooper

      The 1/12 Scale Shadow Stormtrooper comes molded in a glossy black color. He comes armed with three weapon types and can be posed in a variety of positions.


      Product Features

      • Product Size: 6"
      • Material: Plastic
      • Comes With Three Weapon Accessories
      • Extra Hands
      • Poseable

      Box Contents

      • Shadow Stormtrooper Assembly Parts
      • E-11 Blaster 
      • DTL-19 Heavy Blaster Rifle 
      • SE-14r Short-Range Combat Pistol 
      • Display Base 
      • 6 Hand Parts
      • Water Transfer Type Decals 
      • Marking Seal 

      RM95.00
      img
      SAVERM59.10

      [Star Wars] First Order Stormtrooper (The Rise of Skywalker)

      This 1/12 scale model kit features a First Order Stormtrooper as seen in the third installment of the Star Wars sequel trilogy, Star Wars: The Rise of Skywalker. Included with the kit are three types of shoulder paldron parts as well as six interchangeable hand parts.


      • 1/12 scale
      • From Star Wars: The Rise of Skywalker
      • Made of plastic
      • Parts to build a First Order Stormtrooper 
      • Display Base
      • 3 Types of shoulder paldron parts
      • 2 Blaster 
      • Tonfa
      • Shield
      • 6 Interchangeable hand parts
      • Water decals and marking stickers

      RM102.60
      img
      SAVERM78.80

      [Star Wars] 1/12 Kylo Ren (The Rise of Skywalker)

      Based on the movie Star Wars: The Rise of Skywalker comes this 1:12 scale model kit of Kylo Ren. The Star Wars: The Rise of Skywalker Kylo Ren 1:12 Scale Model Kit includes Lightsaber parts with in-motion swing effects as well as hooded and un-hooded cloak parts. This model kit is a must have for Star Wars fans!

      RM136.80
      img
      SAVERM59.10

      [Star Wars] 1/12 BB-8 & D-O with Diorama Base (Rise of Skywalker)

      This 1/12 scale model kit features BB-8 and D-O as seen in the third installment of the Star Wars sequel trilogy, Star Wars: The Rise of Skywalker. Included with the kit is a diorama display base.


      • 1/12 scale
      • From Star Wars: The Rise of Skywalker
      • Made of plastic
      • BB-8 specific parts to recreate movie scene
      • Parts to build BB-8
      • Parts to build D-O 
      • Diorama Display Base
      • BB-8 specific parts to recreate movie scene
      • Water decal and marking stickers

      RM102.60
      img
      SAVERM127.10

      Meisho Movie Realization Ashigaru First Order Stormtrooper

      First order Stormtrooper

      - The characters of the first order are now in the lineup to the famous general MOVIE REALIZATION series.
      - A soldier who serves [Sakai Cairo Ren] (sold separately) scheduled for release in October 2019 is dispatched.

      - set content
        * Main body
      - Replacement wrist left and right two each
        * Japanese sword set
      Blaster rifle

      RM400.00

      Showing 1 - 30 of 42 products