Price Clear







Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 151 - 180 of 426 products

img
SAVERM8.09

1/144 Scale Celestial Being Decal Sheet

Gundam decal sheet recommended for use on HG Gundam Exia, Dynames and Kyrios kits.

RM3.90
img
SAVERM8.09

1/144 Scale Over Flag Decal Sheet

Gundam decal sheet recommended for use on HG Over Flags, Union Flags and Union Flags Custom II Kits

RM3.90
img
SAVERM13.98

Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam

- Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11.5 cm x 13.5 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunpla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
img
SAVERM15.08

HG 1/144 STRIKE FREEDOM Metal Effect Water Decal

- Water Decal for HG 1/144 Strike Freedom Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 10 cm x 9 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM14.90
img
SAVERM8.90

Water Decal MG 1/144 Gundam Seed Blitz Gundam

- Water Decal for Water Decal MG 1/144 Gundam Seed Blitz Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM6.10

Bandai Water Decal #108 HGUC Mobile Suit Gundam ZZ Multiuse

[Bandai] Mobile Suit Gundam ZZ (GD108)



For HGUC Mobile Suit Z Gundam , Gundam ZZ Series 1

RM17.90
img
SAVERM11.00

[Da Lin] Water Decal PG 1/60 Exia Gundam

[Da Lin] Water Decal PG 1/60 Exia Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Water Decal PG 1/60 Exia Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 MS-06R 1A Zaku

[Da Lin] Water Decal for RG 1/144 MS-06R 1A Zaku

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 MS-06R 1A Zaku
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Force Impulse

[Da Lin] Water Decal for RG 1/144 Force Impluse

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Force Impluse
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Justice

[Da Lin] Water Decal for RG Justice

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Justice
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Evanagelion 00

[Da Lin] Water Decal for RG 1/144 Evanagelion 00

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Evanagelion 00
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Evanagelion 02

[Da Lin] Water Decal for RG 1/144 Evanagelion 02

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Evanagelion 02
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Nu Gundam HWS

[Da Lin] Water Decal for RG 1/144 Nu Gundam HWS

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Nu Gundam HWS
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM6.00

[Da Lin] Water Decal for MG 1/100 MBF-P03 Astray Blue Frame (Bronze Blue)

[Da Lin] Water Decal for MG 1/100 MBF-P03 Astray Blue Frame (Bronze Blue)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Gundam Astray Blue Frame
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for HG 1/144 Infinite Justice

[Da Lin] Water Decal for HG 1/144 Infinite Justice

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Infinite Justice
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Sinanju

[Da Lin] Water Decal for MG 1/100 Sinanju

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Sinanju
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gouf Zaku

[Da Lin] Water Decal for MG 1/100 Gouf Zaku

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Gouf Zaku
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Shin Musha

[Da Lin] Water Decal for MG 1/100 Shin Musha

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Shin Musha
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM6.00

[Da Lin] Water Decal for MG 1/100 Sinanju (Bronzing Gold Color Coating)

[Da Lin] Water Decal for MG 1/100 Sinanju (Bronzing Gold Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Sinanju (Bronzing Gold Color Coating)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Amazing Red Warrior

[Da Lin] Water Decal for MG 1/100 Amazing Red Warrior

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Amazing Red Warrior
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Fenice Wing

[Da Lin] Water Decal for MG 1/100 Fenice Wing

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Fenice Wing
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 RX-178 MK II Ver

[Da Lin] Water Decal for MG 1/100 RX-178 MK II Ver

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 RX-178 MK II Ver
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM10.90

[Da Lin] Water Decal for MG 1/100 Formulo 91 (Bronzing Gold Color Coating)

[Da Lin] Water Decal for MG 1/100 Formulo 91

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Formulo 91
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM25.00
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 Shiranui Akatsuki Gundam

[Da Lin] Water Decal HG 1/144  Shiranui Akatsuki Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144  Shiranui Akatsuki Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 HGIBO Vider Gundam

[Da Lin] Water Decal HG 1/144 IBO Vider Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 IBO Vider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 R05 Aegis Gundam

[Da Lin] Water Decal HG 1/144 R05 Aegis Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 R05 Aegis Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 HGIBO Bael Gundam

[Da Lin] Water Decal HGIBO 1/44 Bael Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HGIBO 1/44 Bael Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 R03 Buster Gundam

[Da Lin] Water Decal HG 1/144 R03 Buster Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 R03 Buster Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 Abyss Gundam

[Da Lin] Water Decal HG 1/144 Abyss Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Abyss Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 HGIBO Astaroth Rinascimento Gundam

[Da Lin] Water Decal HG 1/144 HGIBO Astaroth Rinascimento Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144HGIBO Astaroth Rinascimento Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90

Showing 151 - 180 of 426 products