Price Clear







Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 211 - 240 of 426 products

img
SAVERM2.10

Gundam Accessories - Glow in the dark Sticker (10cm x 15cm)

Dimension: 10 cm x  15 cm 

Colors: Jade Color under daylight and, grow in the dark. 

Guide: 
1) Let the paper absorb light for 30 minutes to an hour (you may use torch light, or place under the sun), and it may grow it's light for a long time. 

2) Cut the paper to the right size to be used on the gundam, and stick on it, that's it. 

Tips: Stick the foil sticker included in the bandai original gundam box at the back of this product, and follow the size to cut the shape to ease the re-modelling.

RM3.90
img
SAVERM8.90

Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam

- Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM13.80

Mr Hobby Mr. Mark Softer

This is a softening agent for slide marks. It has the effect of closely adhering slidemarks to curved surfaces.

  • First, apply a quick drop to the area where the decal will go using the brush attached to the cap.
  • Apply decal over it.
  • Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and sticking the decal down fast.
  • The decal will stick perfectly, even on uneven or curved surfaces.
  • If air gets in between the decal and the model surface, after drying delicately prick the decal with a needle and insert Mr.MARK SOFTER through the resulting hole. The air will escape, and the decal will stick down firmly.
  • Capacity: 40ML

RM15.10
img
SAVERM8.90

Water Decal for HG 1/144 Gundam Heavyarms EW

- Water Decal for HG 1/144 Gundam Heavyarms EW
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM8.90

Water Decal for MG 1/100 00 QAN[T] Gundam

- Water Decal for MG 1/100 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM8.90

Water Decal HG Beargguy III

- Water Decal for HG BEARGGUY III water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM8.90

Water Decal HG 1/144 00 QAN[T] Gundam

- Water Decal for HG 1/144 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM8.90

Water Decal for MG 1/100 GAT-X103 BUSTER Gundam

- Water Decal for MG 1/100 GAT-X103 BUSTER Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM8.00

[Da Lin] Water Decal Universal Military Emblem Series Self-Protecting Zeon Federation Char Aznable

[Da Lin] Water Decal Universal Military Emblem Series Self-Protecting Zeon Federation Char Aznable

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Full Mechanics Raider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM3.10

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Gundam Astray Gold Frame Amatsu Mina
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM17.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Providence Gundam

[Da Lin] Water Decal for MG 1/100 Providence Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Providence Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM12.90

HG 1/100 VF-22S Sturmvogel II dedicated water transfer decal

Introducing a special water-transfer decal that pursues the quality of the aircraft models of the Milia and Max!

For HG 1/100 VF-22S Sturmvogel II.
This product contains only one set of HG 1/100 VF-22S Sturmvogel II water-transfer decals.

[Accessories]
1 water-transfer decal

RM29.00
img
SAVERM10.10

[Da Lin] Water Decal for RE / 100 Gundam Guncannon Detector

[Da Lin] Water Decal for RE / 100 Gundam Guncannon Detector

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit RE / 100 Gundam Guncannon Detector
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for RE / 100 Gundam GP04G Gerbera

[Da Lin] Water Decal RE / 100 Gundam GP04G Gerbera

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit RE / 100 Gundam GP04G Gerbera
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for SDCS Gundam Cross Silhouette Calibarn Gundam

[Da Lin] Water Decal for SDCS Gundam Cross Silhouette Calibarn Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit SDCS Gundam Cross Silhouette Calibarn Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM6.10

Bandai Water Decal #128 Mobile Suit Gundam OO The Movie Multiuse 2

\"Gundam Decal\" new lineup! Introducing water transfer decals that can be used on 1/144 scale!
Highly versatile water transfer decal.
Decals compatible with Harute Raphael Jinx IV are included.

RM17.90
img
SAVERM10.10

[Da Lin] Water Decal for HG / 144 Zaku II High Mobility Type Tri-Stars

[Da Lin] Water Decal for HG / 144 Zaku II High Mobility Type Tri-Stars

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG / 144 Zaku II High Mobility Type Tri-Stars
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for HG / 144 AMX-107 Bawoo

[Da Lin] Water Decal for HG / 144 AMX-107 Bawoo 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG / 144 AMX-107 Bawoo 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for HG / 144 Infinite Justice Gundam Type II

[Da Lin] Water Decal for HG / 144 Infinite Justice Gundam Type II 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG / 144 Infinite Justice Gundam Type II 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 GTO Zaku Half Cannon

[Da Lin] Water Decal for HG 1/144 GTO Zaku Half Cannon (Gundam The Origin)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 GTO Zaku Half Cannon (Gundam The Origin)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Gunner Zaku Warrior (Red / Green)

[Da Lin] Water Decal for HG 1/144 Gunner Zaku Warrior (Red / Green)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Gunner Zaku Warrior (Red / Green)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Gundam Throne Drei

[Da Lin] Water Decal for HG 1/144 Gundam Throne Drei

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Gundam Throne Drei
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Calamity Gundam

[Da Lin] Water Decal for HG 1/144 Calamity Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Calamity Gundam 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Gundam Throne Zwei

[Da Lin] Water Decal for HG 1/144 Gundam Throne Zwei 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Gundam Throne Zwei 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Reborn Gundam

[Da Lin] Water Decal for HG 1/144 Reborn Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Reborn Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
img
SAVERM8.00

[Da Lin] Water Decal Universal Military Emblem Series, Zeon Federation Army Gouf Zaku

[Da Lin] Water Decal Universal Military Emblem Series, Zeon Federation Army Gouf Zaku

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Full Mechanics Raider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal Universal Military emblem series, 00 Tianren, 00R GNX

[Da Lin] Water Decal universal military emblem series, 00 Tianren, 00R GNX

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Full Mechanics Raider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM7.00

Water Decal for HG 1/144 Mighty Strike Freedom

Water Decal HG 1/144 Mighty Strike Freedom

This is a High Quality Water Decal, it is not a sticker. 

- For model kit HG 1/144 Mighty Strike Freedom
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from China

RM5.00
img
SAVERM7.00

Water Decal for HG 1/144 Infinite Justice Type II

Water Decal HG 1/144 Infinite Justice Type II

This is a High Quality Water Decal, it is not a sticker. 

- For model kit HG 1/144 Infinite Justice Type II
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from China

RM5.00
img
SAVERM15.30

1/100 HG VF-31C Siegfried (Mirage Farina Jenius) Special Water Transfer Decal

These decals from Bandai are made especially for their 1/100-scale HG VF-31C Siegfried as piloted by Mirage Farina Jenius! Order yours today!

RM26.60

Showing 211 - 240 of 426 products