Price Clear







Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 361 - 390 of 500 products

img
SAVERM13.80

Mr Hobby Mr. Mark Softer

This is a softening agent for slide marks. It has the effect of closely adhering slidemarks to curved surfaces.

  • First, apply a quick drop to the area where the decal will go using the brush attached to the cap.
  • Apply decal over it.
  • Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and sticking the decal down fast.
  • The decal will stick perfectly, even on uneven or curved surfaces.
  • If air gets in between the decal and the model surface, after drying delicately prick the decal with a needle and insert Mr.MARK SOFTER through the resulting hole. The air will escape, and the decal will stick down firmly.
  • Capacity: 40ML

RM15.10
img
SAVERM11.00

Mr Hobby Mr. Mark Setter 40ML

  • Apply the mark setter to the position where decal is to be stuck.
  • Stick a slide mark
  • Spread it evenly and remove water with a swab, etc.
  • Apply the mark softer on it, remove water again.

In the past, Mr. MARK SOFTER was used simply to soften decals. 

However, now, using Mr. MARK SOFTER together with Mr. MARK SETTER (which gives decals greater adhesiveness) makes it much easier to affix decals to plastic models. 

First, the area to which the decal will be affixed is painted and the decal is applied. 

After air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr. MARK SOFTER is applied and allowed to dry. 

Because the decal now has greater adhesiveness, adhesive silvering (the floating and shiny quality of the clear parts of decals) can be firmly affixed to uneven surfaces. 

It is perfect even for poorly made decals from Eastern European models. 

Decals have better adhesiveness if the painted surface is prepared to have a glossy appearance, and they gain an appearance that suggests they were drawn by hand.

RM17.90
img
SAVERM11.00

[Da Lin] Water Decal PG 1/60 Red Frame

[Da Lin] Water Decal for PG 1/60 Red Frame

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for PG 1/60 Red Frame
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM11.00

[Da Lin] Water Decal PG 1/60 Strike Rouge + Skygrasper

[Da Lin] Water Decal for PG 1/60 Strike Rouge + Skygrasper

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for PG 1/60 Strike Rouge
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM3.10

[Da Lin] Water Decal for MG 1/100 Exia GN-OO Common Use (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Exia GN-OO Common Use. (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Exia GN-OO Common Use. (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM17.90
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Unicorn +MS Cage (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Unicorn +MS Cage  (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Unicorn +MS Cage (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Exia

[Da Lin] Water Decal for MG 1/100 Exia


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Exia
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM11.00

[Da Lin] Water Decal PG 1/60 Unicorn Banshee Gundam

[Da Lin] Water Decal PG 1/60 Unicorn Banshee Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Water Decal PG 1/60 Unicorn Banshee Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 RX-78 NT-1

[Da Lin] Water Decal for MG 1/100 RX-78 NT-1


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 RX-78 NT-1
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for HG 1/144 RX79 GM08

[Da Lin] Water Decal for HG 1/144 RX79 GM08


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for HG 1/144 RX79 GM08
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 FA-78 Full Armor Ver. Ka

[Da Lin] Water Decal for MG 1/100 FA-78 Full Armor Ver. Ka


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 FA-78 Full Armor Ver. Ka
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for HG 1/144 Thunderbolt Zaku Series

[Da Lin] Water Decal for HG 1/144 Thunderbolt Zaku Series


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for HG 1/144 Thunderbolt Zaku Series
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for Full Metal Panic Caution (Grey & White)

[Da Lin] Water Decal for Full Metal Panic Caution (Grey & White)


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for Full Metal Panic Caution (Grey & White)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for Full Metal Panic Caution (Silver & Red)

[Da Lin] Water Decal for Full Metal Panic Caution (Silver & Red)


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for Full Metal Panic Caution (Silver & Red)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for HG 1/144 Neo Zeong Narrative Version

[Da Lin] Water Decal for HG 1/144 Neo Zeong Narrative Version


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for HG 1/144 Neo Zeong Narrative Version
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for HG 1/144 Neo Zeong Sinanju Version

[Da Lin] Water Decal for HG 1/144 Neo Zeong Sinanju Version


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for HG 1/144 Neo Zeong Sinanju Version
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Sinanju Stein Narrative Version

[Da Lin] Water Decal for MG 1/100 Sinanju Stein Narrative Version


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Sinanju Stein Narrative Version
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for HiRM 1/100 God gundam

[Da Lin] Water Decal for HiRM 1/100 God gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for HiRM 1/100 God gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 OO Qan[T]

[Da Lin] Water Decal for MG 1/100 OO Q[Tan]

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 1/100 OO Q[Tan]
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Gundam Strike Freedom (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Gundam Strike Freedom (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Gundam Strike Freedom (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM19.90
img
SAVERM7.10

[Da Lin] Water Decal for MG/NG 1/100 Astray Gold Frame Amatsu Mina (Bronzing Color Coating)

[Da Lin] Water Decal for 1/100 Scale Astray Gold Frame Amatsu Mina (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for 1/100 Scale Astray Gold Frame Amatsu Mina (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Sazabi Ver. Ka. (Bronzing Gold Color Coating)

[Da Lin] Water Decal for MG 1/100 Sazabi Ver. Ka. (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Sazabi Ver. Ka. (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM16.00
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Nu Gundam /v Gundam Ver. Ka (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Nu Gundam Ver. Ka  (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Nu Gundam Ver. Ka (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 GN Sword IV

[Da Lin] Water Decal for MG 1/100 GN Sword IV

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 GN Sword IV
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 RX-178 MK-II (Titans)

[Da Lin] Water Decal for RG 1/144 RX-178 MK-II (Titans)
This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 RX-178 MK-II (Titans)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Freedom Gundam

[Da Lin] Water Decal for RG 1/144 Freedom Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Freedom Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM11.00

[Da Lin] Water Decal PG 1/60 Strike Gundam + Skygrasper

[Da Lin] Water Decal for PG 1/60 Strike + Skygrasper

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for PG 1/60 Strike + Skygrasper
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM11.00

[Da Lin] Water Decal Mega Size Char's Zaku II

[Da Lin] Water Decal Mega Size Char\'s Zaku II

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Mega Size Char\'s Zaku II
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM11.00

[Da Lin] Water Decal Mega Size Zaku II MS-06J

[Da Lin] Water Decal Mega Size Zaku II MS-06J

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Mega Size Zaku II MS-06J
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for Full MG 1/100 EX-S EXS MSA-0011 Strike

[Da Lin] Water Decal for Full MG 1/100 EX-S EXS MSA-0011 Strike

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for Master Grade Model Kits MSA-001.
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00

Showing 361 - 390 of 500 products