Price Clear







Gundam Parts • CUSTOM PARTS

Showing 91 - 120 of 477 products

[Builder Parts] 1/144 MS Hand 02 (Zeon)
SAVERM9.90

[Builder Parts] 1/144 MS Hand 02 (Zeon)

The hands in this set contain the rounded bulky design characteristic of Zeon mobile suits.

Set include:
- Fist (L&R) x2
- Flat hand (L&R) x2
- Hand for weapon (L&R) x2
- Top of hand x12

RM20.00
[Builder Parts] 1/144 MS Vernier 01
SAVERM15.90

[Builder Parts] 1/144 MS Vernier 01

- July 2012, a new line appeared in the builder's part! In the Detail-Up Parts, the Gundam More enjoyable! - With Gundam Part composition was conscious of compatibility is, of course, adopted the split parts considering the coloring. In addition, the if you are using the material, you can easily cut, glue, and coloring. - Appearance is, of course, attention to internal structure vernier parts! - 1/144, 1/100, enclosed are three types of cone type, flap type, each type of ring. - 1/144 to RG, 1/100 will correspond to the MG.


- These vernier parts feature a detailed appearance and elaborate inner structure.
- 3 types of verniers (cone, flap, and ring type) are included.
- 2 sets of cone x2, flap x2, ring x2, blast x2, flap x2, ring x2, attachment x8



RM20.00
[Builder Parts] 1/100 MS Spike 01
SAVERM14.90

[Builder Parts] 1/100 MS Spike 01

In the Detail-Up Parts, the Gundam modelling process has turned more enjoyable then ever.


With Gundam Part composition was conscious of compatibility is, of course, adopted the split parts considering the coloring. 
In addition, if you are using the material PS, you can easily cut, glue, and coloring. 

 - 3 types pedestal, with a combination of three needle, can be used in nine kinds of variations. 
 - The content of the commodity: three needle x, 3 x pedestal seed [x2 Sets] 

RM21.00
MG 1/100 Strike Freedom Effect Unit Wing of Skies [Wing Effect Part]
SAVERM10.10

MG 1/100 Strike Freedom Effect Unit Wing of Skies [Wing Effect Part]

Super Dragoon System Wing Effect For MG Strike Freedom Gundam 
Package Include :
  • 4 pieces Wing Effect
  • 24 pieces connection sockets
Notes :
  • Gundam Model Kit is Not Include
  • Action Base is NOT Include
  • Super Dragoon System is NOT Include

Super Dragoon System can order at HERE.

RM18.90
MG Wing Zero Custom PVC Wing Feather - White (Non-Bandai)
SAVERM14.98

MG Wing Zero Custom PVC Wing Feather - White (Non-Bandai)

  • Painting is not needed, modelling tools were required to built the finish product shown on the picture.
  • Gundam modelling kits are not included in the package, this is just the feather "wing" modded version of the Wing Zero Custom.
  • Suitable for Wing Zero Custom 1/100 Master Grade Only.
  • Color option - White / Black

RM15.00
[Builder Parts] HD 1/144 MS MS EFFECT 01
SAVERM9.90

[Builder Parts] HD 1/144 MS MS EFFECT 01

Effect parts for recreating the scenes.

2 kinds of beam sabers and 2 kinds of nozzle effects are included.
2 sets of nozzle effect x2 and beam saber x2

For scale 1/144

RM20.00

ABS Pla Plate thinness 3.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 3.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

ABS (Acrylonitrile Butadiene Styrene) Plate
ABS is favored for parts that need to withstand mechanical stress or heat. 

Best for: Custom weapons, inner frames, or joints that might rub against other parts.

Handling: It is more elastic than standard styrene, meaning it is less likely to shatter if dropped. However, it is harder to bond with standard hobby cement; you should use ABS-specific cement or super glue.

Warning: Certain "pour-type" panel line markers can make ABS brittle and cause it to crack if applied directly to the bare plastic.

RM9.00
HG Strike Gundam Metal Blade Part
SAVERM14.48

HG Strike Gundam Metal Blade Part

  • HG Strike Gundam metal knife part
  • This unit consists of the metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.

RM15.50
[Builder Parts] Non-Scale MS Vernier 02
SAVERM17.40

[Builder Parts] Non-Scale MS Vernier 02

The official conversion parts being made precisely for refining your Gunpla. 
The second vernier set is a non-scale offering, giving you more freedom to put them wherever you want on whatever kit you want!

Mobility-enhancing parts are now available as official gunpla remodeling parts.
Vernier set excellent at versatility. Square type, round type, 2 each of large and small.
Customize your Gunpla by attaching it to a backpack or thigh.
Molded product x 2

RM24.50
DDB MGSD Snow White Prelude Unit with Action Base
SAVERM10.00

DDB MGSD Snow White Prelude Unit with Action Base

DDB Model MGSD Snow White Component Set Model Kit

Material: PVC, ABS
Scale: MGSD

Include:
- Floor / Base
- Bracket
- Model kit to build the Components

* Does not contain the main body

RM55.00
Option parts set Gunpla 09 (Giant Gatling)
SAVERM15.90

Option parts set Gunpla 09 (Giant Gatling)

Giant Gatling, which can be customized into various forms by freely rearranging the included accessory parts, is now available as an optional parts set!
Create your own original Giant Gatling by combining various accessory parts.
Two types of grip parts are included: one for 1/144 scale and one for 1/100 scale.

[Accessories]
- Giant Gatling x 1
- Grip x 1
- Accessory parts x 1
- Joint parts x 1

RM20.00
Option parts set Gunpla 06 (Valuable Pod)
SAVERM19.90

Option parts set Gunpla 06 (Valuable Pod)

A booster with a wealth of weapons that can be combined with various HG series items is now available as an optional parts set!

Can be attached to various aircraft by using joint parts. By combining it with the separately sold HGUC 1/144 Gyan, you can reproduce Gan Vulcan.
The back vulcan can be moved up and down.
It is also possible to equip the tip of the shield with a beam saber.
The shield can move freely on multiple axes, and various MS can be equipped by using grip parts.

[Accessories]
Valuable pod x 1 set
Joint parts x 1 set
Grip x 1 set
Seal x 1

RM28.00
Option Parts Set Gunpla 19 (Fin Funnels)
SAVERM37.40

Option Parts Set Gunpla 19 (Fin Funnels)

Bandai brings us the long-awaited weapon set for the "Entry Grade" 1/144-scale Nu Gundam! The Fin Funnels can be attached to a variety of units using the included joint parts; recreate firing poses by using the separately-sold Weapon Display Base 01. You can also combine two sets to recreate double Fin Funnels! Order yours today!

[Includes]:

* Fin Funnels (x6)
* New Hyper Bazooka
* Beam Saber (x1 set)
* Backpack
* Joint parts (x1 set)

RM52.50
[Metal Part] Metal Thruster / Vents for Gundam Kit (C9, Red) (2 Units)
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C9, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM9.10
[Metal Part] Metal Thruster / Vents for Gundam Kit (N3, Silver) (2 Units)
SAVERM4.00

[Metal Part] Metal Thruster / Vents for Gundam Kit (N3, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N3)

  • Specifications : Maximum diameter 10.0mm, Height 10.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM13.00
Expansion Feathers Effect for MG 1/100, RG 1/144, HG 1/144 Wing Gundam Zero EW
SAVERM25.10

Expansion Feathers Effect for MG 1/100, RG 1/144, HG 1/144 Wing Gundam Zero EW

Expansion Feathers Effect for Wing Gundam Zero EW

Suitable for MG , RG and HG

Package contain : 
  • 15 pieces of different size white pearl color features
  • For 1/144 or 1/100 scale
  • Use it with action base 1 or 2
  • Model Kit body is not included
This is pre-painted plastic model kits part and require snap-fit assembly only

RM12.90
Option Parts Set Gunpla 10 (Galaxy Booster)
SAVERM19.90

Option Parts Set Gunpla 10 (Galaxy Booster)

The backpack of Build Strike Galaxy Cosmos is now available as an optional parts set!
With the Striker Pack system, it can be equipped on various Gunpla.
Each of the 12 wings, which is the biggest feature, can move independently and create a wide variety of silhouettes.
Joint parts are also included to expand the range of customization.

[Accessories]
Galaxy booster x 1
Joint parts x 1 set
Pedestal x 1
Seal x 1

RM28.00
Option Parts Set Gunpla 08 (Bolden Arm Arms)
SAVERM22.90

Option Parts Set Gunpla 08 (Bolden Arm Arms)

A support machine connected by a flexibly movable arm and a wide variety of joint parts are now available as an optional parts set!
By rearranging parts, it can be transformed from flight form to combined form and can be equipped on various MS.
In addition to the main body, a variety of joint parts are included, including a single-axis joint, two-axis joint, and large, medium, and small ball joints.

[Accessories]
Bolden arm arms x 1 set
Anchor parts x 1
Joint parts x 1 set

RM25.00
MG 1/100 Scale Wing Zero Custom PVC Wing Feather - Black (Non-Bandai)
SAVERM14.98

MG 1/100 Scale Wing Zero Custom PVC Wing Feather - Black (Non-Bandai)

  • Painting is not needed, modelling tools were required to built the finish product shown on the picture.
  • Gundam modelling kits are not included in the package, this is just the feather \"wing\" modded version of the Wing Zero Custom.
  • Suitable for Wing Zero Custom 1/100 Master Grade Only.
  • Color - Black

RM15.00
Entry Grade EG 1/144 Aile Striker Gundam Option Parts Set Gunpla 01 for Strike Gundam
SAVERM27.40

Entry Grade EG 1/144 Aile Striker Gundam Option Parts Set Gunpla 01 for Strike Gundam

This option parts set from Bandai includes everything you need to convert your Entry Grade 1/144 Strike Gundam into the Aile Strike Gundam, and the set is also compatible with other HG items! 3mm joints and C-type joint parts are included that can be selected depending on the kit it's used with. A wealth of armaments such as a bazooka and the Grand Slam are also included; you can recreate Perfect Strike Gundam by combining It with the Gundam Option Parts Set 2, sold separately! Order yours today!

[Includes]:

  • Aile Striker (x1 set)
  • Beam saber (x2)
  • Energy pack
  • Joint parts (x1 set)
  • Grand Slam
  • Bazooka
  • MMI-M1001 90mm anti-aircraft shotgun

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

RM38.50
Gundam Option Parts Set Gunpla 04 (Build Hands Round Shape)
SAVERM15.90

Gundam Option Parts Set Gunpla 04 (Build Hands Round Shape)

This option parts set from Bandai allows you to improve the expressiveness of your Gundam model kits with round-fingered hands available in three sizes! Two sets of hands are included in three sizes: small, medium, and large, for a total of 36 hand parts. Includes fists, flat hands, and weapon-holding hands. The weapon-holding hands can use items with a 4mm x 2mm grip, or a 3mm-diameter saber grip. Order yours today!

[Includes]:

  • Hand parts, small (three types each, left and right) (x2)
  • Hand parts, medium (three types each, left and right) (x2)
  • Hand parts, large (three types each, left and right) (x2)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

RM20.00
Option Parts Set Gunpla 16 (Meteor Hopper)
SAVERM15.90

Option Parts Set Gunpla 16 (Meteor Hopper)

* The 16th installment of the Option Parts Set Series that offers infinite customization play is the Meteor Hopper that played an active role in Gundam Build Fighters!

* Ride the MS with the movable grip and mounting stay. The left and right side binders can be flexibly deployed.
* Can be connected to the Buster Rifle Custom from the separately sold HGBF 1/144 Wing Gundam Fenice.
* The included dedicated stand allows for a stable display.
* Can be used with various HG series.

[Accessories]
* 1 x Meteor Hopper
* 1 x Joint Parts
* 1 x Dedicated Stand

RM32.00
Option Parts Set Gunpla 15 (Cavalier Aifrid)
SAVERM81.70

Option Parts Set Gunpla 15 (Cavalier Aifrid)

  • The Cavalier Ifrid that appeared in Mobile Suit Gundam SEED FREEDOM is turned into a 3D figure with an optional parts set!
  • Various joint parts are included. Can be attached to various aircraft.
  • Includes a prototype Type 35 modified rail gun.
  • Hatches on the missile pod can be opened and closed.
  • Wings can be deployed. Can recreate flight form.
  • Includes an expansion joint that allows you to equip various backpacks to the separately sold HG 1/144 Z'Gok (SEED FREEDOM Ver.) and other models, and an expansion joint that allows you to mount the rail gun to other kits.
  • Includes an Action Base 7. Can be displayed alone.

[Accessories]
  • 1 Cavalier Ifrid
  • 1 prototype Type 35 modified rail gun
  • 1 set of joint parts
  • 1 action base 7
  • 1 plastic sticker
  • 1 sticker

RM80.00
Third Party Brand  Double Horn Funnel Weapon Set for RG 1/144 MSN-04FF SAZABI
SAVERM4.00

Third Party Brand Double Horn Funnel Weapon Set for RG 1/144 MSN-04FF SAZABI

Third Party Brand Double Horn Funnel RG 1/144 MSN-04FF SAZABI

Brand : GaoGao
Grade : HG
Scale : 1/144
Model : Double Horn Funnel Weapon Set

Please note that this is non-Bandai item.

RM28.00
Metal Double Axe for MG Zaku ( 1 Pair , 2 pcs )
SAVERM7.00

Metal Double Axe for MG Zaku ( 1 Pair , 2 pcs )

Metal Double Axe for MG Zaku ( 1 Pair , 2 pcs )


Material : Metal 
Unit : 1 pair, 2 pcs

For MG 1/100 Scale Zaku

RM12.90
ABS Rod 240mm Long (mix 7pcs - L Shape, Rectangle) for DIY customize Model Kit
SAVERM4.80

ABS Rod 240mm Long (mix 7pcs - L Shape, Rectangle) for DIY customize Model Kit

Material: ABS

Shapes:  L Shape , Retangle

Package Contents :
-----------------------
L Shape
1. Width : 2mm+- x 2mm+- ,Length : 24cm+-
2. Width : 3mm+- x 3mm+- ,Length : 24cm+-
3. Width : 4mm+- x 3mm+- ,Length : 24cm+-

Retangle
1. Width : 2.0mm+- ,Height : 1.0mm+- ,Length : 24cm+-
2. Width : 3.0mm+- ,Height : 1.5mm+- ,Length : 24cm+-
3. Width : 4.0mm+- ,Height : 2.0mm+- ,Length : 24cm+-
4. Width : 5.0mm+- ,Height : 1.5mm+- ,Length : 24cm+-

RM7.20
PVC Pla Plate thinness 0.3 mm (20cm x 30cm) for Gunpla Model Modification or Customization
SAVERM1.30

PVC Pla Plate thinness 0.3 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVC Pla Plate for Gunpla Modification or Customization


Thinness : 0.3 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC "Pla Plates" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional "Pla Plate" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM1.50
PVC Pla Plate thinness 0.5 mm (20cm x 30cm) for Gunpla Model Modification or Customization
SAVERM1.50

PVC Pla Plate thinness 0.5 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVB Pla Plate for Gunpla Modification or Customization


Thinness : 0.5 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC \"Pla Plates\" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional \"Pla Plate\" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM2.00
PVC Pla Plate thinness 1.0 mm (20cm x 30cm) for Gunpla Model Modification or Customization
SAVERM2.50

PVC Pla Plate thinness 1.0 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVB Pla Plate for Gunpla Modification or Customization


Thinness : 1.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC \"Pla Plates\" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional \"Pla Plate\" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM3.00
PVC Pla Plate thinness 2.0 mm (20cm x 30cm) for Gunpla Model Modification or Customization
SAVERM1.00

PVC Pla Plate thinness 2.0 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVB Pla Plate for Gunpla Modification or Customization


Thinness : 2.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC \"Pla Plates\" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional \"Pla Plate\" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM6.50

Showing 91 - 120 of 477 products

Contact Us