• Home
  • Gundam Model Kits

PRODUCTS

Price Clear







Grade

Brand

Availability

Gundam Model Kits

img MOBILE SUIT GUNDAM

Showing 211 - 240 of 355 products

Quick View
img
SAVERM11.20

[BB321] Bacho Blue Destiny

The "Blue Destiny," a.k.a "Shin-i no Kin-Bacho," rides forth from the new Sangokuden series! Armor can be removed and hair parts can be reversed to transform from normal to berserker mode. Knob on head can be turned to transform eyes from normal to berserker mode. It includes the Shiryu Gokurenso weapon, which can be disassembled into multiple swords and spears.

RM22.70
RM22.70 Request Stock
Quick View
img
SAVERM40.50

MG 1/100 RB-79 Ball Ver.Ka (30th Anniversary)

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

RM79.40
RM79.40 Request Stock
Quick View
img
SAVERM194.90

MEGA SIZE 1/48 RX-78-2 Gundam

The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image

RM273.00
RM273.00 Request Stock
Quick View
img
SAVERM57.10

MG 1/100 RX-78-2 Gundam One Year War (w/clear parts)

Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

RM134.80
RM134.80 Request Stock
Quick View
img
SAVERM59.90

[001] RG 1/144 RX-78-2 Gundam

  • Runner x 10, Realistic decal x1, Instruction manual 
  • A new series REAL GRADE (RG) rolls out in July 2010. 
  • A new brand of plastic model kit that pursues realistic representation with the latest technology for all those who know Gundam. A highly detailed model that has dynamic action and gimmicks. A pre-constructed inner frame makes assembling stress-free. 
  • All settings of RX-78-2 Gundam are consolidated into the 125mm tall body. 
  • Having an inner frame "Advanced MS Joint" which makes it possible to move dynamically with fewer parts. 
  • Attached the "Realistic Decal" that pursues reality with special material.

RM90.00
RM90.00 Request Stock
Quick View
img
SAVERM239.90

PG 1/60 RX-78-2 Gundam

This item is a posable, Perfect-Grade injection-plastic kit of an item from the Gundam universe. 626 parts. 31cm high when completed. 
Things don't get much better than this for Gundam fans.

The kit that Bandai has produced is truly amazing. The most striking aspect is the incredible level of INNER detail. It's almost a shame to put any of the cover panels on this thing, because there is so much on the inside that a little silver and black paint will make very interesting to look at. Bandai is aware of this, and is also going to market an optional parts set for the kit that includes transparent body pieces! This is due in December, we're told. That set will also include a light-up beam saber.

What can you say about this kit? Though some weapons are not included (no doubt for a later release), it's just about everything you could hope for in terms of detail and poseability. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this. Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece will be completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM480.00
RM480.00 Request Stock
Quick View
img
SAVERM16.60

HGUC 1/144 RX-78-2 Gundam (Ver.G 30th)

RX-78-2 Gundam Ver.G 30th

RM50.30
RM50.30 Request Stock
Quick View
img
SAVERM107.90

MG 1/100 MS-14S Gelgoog Char Custom Ver.2.0

MS-14S Gelgoog Char Custom Ver.2.0


Late in the One Year War, the Y designation was removed and the Gelgoog Commander Type was given a limited production run. With a more powerful generator and thruster output, the Commander Type even surpassed the performance of the feared RX-78-2 Gundam, as proven by Char Aznable in Texas Colony and in Solomon space.

RM162.00
RM162.00 Request Stock
Quick View
img
SAVERM80.10

MG 1/100 MSM-04 Acguy (w/clear parts)

RM159.80
RM159.80 Request Stock
Quick View
img
SAVERM65.90

MG 1/100 RX-78-2 Gundam Ver.O.Y.W 0079 Animetion Color

Molded in the colors used in the classic "Mobile Suit Gundam" anime series, this version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor, and comes armed with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.


Wikipedia Information
The RX-78-2 Gundam(aka Gundam) is the titular mobile suit of Mobile Suit Gundam. Part of the RX-78 Gundam series, It was built in secret on Side 7, the Gundam would turn the tide of war in favor of the Earth Federation during the One Year War. The unit was primarily piloted by Amuro Ray.

The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium, its frame was both lighter than that of Zeon's mass-produced Mobile Suits and much sturdier, able to shrug off a Zaku's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zeon Zakus. The Gundam would engage in most battles with its Beam Rifle making it the first Mobile Suit to have firepower equivalent to a battleship beam cannon. In addition, it made use of two beam sabers, a blade of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance than the blade of the saber would allow.

The Gundam also used more conventional weaponry: it could be launched with a Hyper Bazooka, the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan cannons, providing it with a last resort weapon as well as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the Gundam Hammer - a large weapon similar to a flail which could be swung at enemies to deal crushing damage.

The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the Hyper Hammer. Lastly, it wielded a large shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot Amuro Ray would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.

In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Boa Qu to improve its reaction times, the joints of the Gundam were given a Magnetic Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".

The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the Gundam be too heavily damaged and gives the pilot a chance to escape from battle.

Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull

Weapons
  • 60mm Gatling Cannons "Vulcan Gun"- The Vulcan cannons were 60mm Gatling Guns stored on the sides of the Gundam's head. Having the greatest rate of fire of all the Gundam's weapons these are primarily used to ward off advancing enemies, shoot down missiles, or hit other fast moving targets. They also made good use as an anti-aircraft and anti-personnel weapons. The Vulcan cannons however had a hard time piercing heavy armor (Though they had shown the ability to do severe damage to Mobile Suit's if fired at point-blank range)and thus were not often used against larger, more heavily armored foes. Still the Vulcans were useful in preserving ammunition for the Gundam's more powerful weapons such as the Beam Rifle.
  • BAUVA*XBR-M-79-07G (Bauva eXperimental Beam Rifle Medium-range) - A revolutionary weapon for it's time, the Beam Rifle is the primary weapon used by the Gundam. Making use of the Federations E-cap (or "energy capacitor") technology, the rifle uses charged concentrations of Minovsky particles as ammunition. This gives the beam rifle firepower equivalent to that of a battleship's beam cannons. As the Minovsky particles destroy matter on a molecular scale, the beam rifle can penetrate even the thickest armor and destroy its target with a single shot. One weak point of the rifle was its energy limits. The rifle could only be fired 16 times before depleting its energy and becoming useless.
  • Beam Saber- The Gundam was the first mobile suit to ever use a beam-oriented weapon in melee combat. The sabers are stored on the backpack, and can transform from saber to the Gundam Javelin, a large pole with a three pronged beam at the end. The beam sabers use Minovsky particles held in place by an I-Field to form an effective cutting surface that can slice through nearly any material. The particles for the beam sabers are stored by E-cap in the hilt of the saber, which is recharged from the Gundam's reactor when the saber is returned to its socket. Once activated, beam sabers do not rely on the mobile suit's reactor and can be thrown or discarded as decoys. The beam saber is most often used for close range combat or as an emergency weapon once all other ammunition has been depleted.
  • Gundam Hammer/Hyper Hammer - A rather unusual weapon, the Gundam Hammer was essentially a large spiked ball attached to a chain. It was used to give the Gundam a ranged melee weapon. The Gundam could either throw or swing the Hammer around itself in order to impact and damage its target through the sheer mass of the hammer. Later, it was upgraded into the Hyper Hammer and had several rockets mounted into the ball in order to give it use in space allowing it to maneuver in zero-gravity also the ability to change it's direction before impact, and to increase the damage it could cause.
  • BLASH*XHB-L-03/N-STD (Blash eXperimental Hyper Bazooka Long-range) - Similar to the Zaku's Bazooka, the Hyper Bazooka was a heavy weapon used by the Gundam. Technically a large rocket launcher it could fire several 380mm missiles to attack targets at long range. While very powerful the Hyper Bazooka had a slow rate of fire and fairly little of ammunition. Most oftenly used to take out slow, heavily armored targets.
  • RX*M-Sh-008/S-01025 (Renpou [Federation] eXperimental Medium Shield) - Hand-carried, forearm-mounted or stored on the Gundam's backpack, the shield is a simple defense used to block most incoming ballistic and explosive projectiles. Also used to great effect in close quarters battle with enemy mobile suits. Has a view port than can be sealed off with an internal blast plate. The shield is also used to deflect heat away from the mobile suit when undergoing atmospheric re-entry.
  • Core Block System - The initial idea of the Core Fighter was as a form of escape if the Gundam were to be destroyed, allowing the irreplaceable data collected by the learning computer and the pilot to escape from a replaceable machine. Another idea was that the Core Fighter could be launched into the field as a support fighter, and the A and B blocks could be delivered by another vehicle (the Federation developed a support unit, the Gunperry, for this role) if needed for a mid-air conversion into a mobile suit.
  • Learning Computer System - A critical component of the Gundam's success in combat, the Learning Computer System was similar to a modern day black box. It recorded the data from each of the Gundam's battles for further use. However, the system could also actively learn and improve the capabilities of the Gundam, explaining why Amuro had such difficulty fighting two Zaku IIs on his first try but managed to hold off ace pilot Char Aznable at Luna II.
  • Re-entry Coolant System - The re-entry system is used for only emergencies when the Gundam is falling to Earth and has no chance of reaching its carrier. The coolant system acts as a large heat-resistant film which lowers the Gundam's temperature when descending to Earth.

RM126.00
RM126.00 Request Stock
Quick View
img
SAVERM34.90

[072] HGUC 1/144 RGM-79FP Gm Striker

- Commercialization of HGUC series in the MS that appeared in the bonds of Mobile Suit Gundam Battlefield] arcade game.
- The pursuit of realism add a mold rivets, welding in the armor of the whole body.
- Elbow adopts a double joint, reproducible posing in the play.
- Armed comes shield twin beam and Spear (provisional), the beam saber.
Beam Spear, of saber reproduced in clear.
- I reproduce a movable gimmick of twin beam spear, the expansion and contraction of the blade gimmick part of the shield.

RM49.00
RM49.00 Request Stock
Quick View
img
SAVERM41.90

[075] HGUC 1/144 RX-78 GP02A Physalis (Type MLRS)

RX-78GP02A Gundam GP02A (Type-MLRS) is a prototype general-purpose tactical mobile suit and is a variant of the RX-78GP02A Gundam "Physalis". It is featured in the original design series Harmony of Gundam variations by Hajime Katoki.

Alternate equipments for the Gundam Physalis allow it to function as a heavy assault mobile suit. The nuclear warhead is removed and replaced by a six-tube Multiple Launch Rocket System, or MLRS, with three tubes mounted on each side of the backpack. The rockets in the MLRS are almost the size of a cruise missile, and thus can pack a much larger punch. In mid range combat, it can easily bombard a large area, sweeping down a majority of the enemies so that the normal troops can come in to clean up the remaining enemies easily.
For more conventional firepower, the GP02A can be loaded with a particle generator in place of the nuclear warhead and use the atomic bazooka as a heavy beam bazooka. The firepower of beam bazooka can rival that of a mega particle cannon on a large scale mobile armor such as MA-05 Bigro and the full charge shot is roughly equivalent to that of the massive MA-08 Big Zam.

However, none of the aforementioned equipment is used as the GP02A is stolen by Zeon ace Anavel Gato and then used to disable or destroy 2/3 of the Federation space fleet at Konpei Island. The GP02A is later destroyed in a heated battle with the GP01Fb Gundam Zephyrantes Full Burnern.

Art of this kits:

RM90.00
RM90.00 Request Stock
Quick View
img
SAVERM122.00

MG 1/100 RX-78-2 Gundam Ver.3.0

  • Kicking off the future of the modern Master Grade: the classic RX-78-2 Gundam 3.0!
  • August 2013 marks the next step in the ever-shifting evolutions of Bandai's Gunpla model system! Designers have worked nonstop to update the idea of the realistic Mobile Suit kits- from the RX-78-2 Gundam, Ver. 1.5, Ver.Ka, Ver. One Year War 0079 to the Ver. 2.0, the RX-78-2 Gundam has led the charge in the evolution of the Master Grade kit. The Ver. 2.0 created the modern standards for the Master Grade model, continuing with December 2012's v Gundam Ver.Ka. This first 3.0 includes advances in sliding armor, color and movement-based parts division- technology that puts forth a new sort of potential for Gunpla. Through the years of trial and error, the RX-78-2 Gundam has served as a benchmark of the technological evolutions driving forward the realism and detail of the Master Grade- working to recreate the designs you know and love as scale models, and working to reimagine these designs in ways that will expand your view of the Suits. 
  • With the release of the RX-78-2 Gundam, Master Grade 3.0 has begun.
  • Using a fusion of exterior interlocking armor that integrates with the poseable inner frame, this kit achieves an even better range of movement than the Ver. 2.0 and it's removable armor systems. In addition, movable accent pieces, such as shoulder armor, enable an even greater level of mobility than before.
  • Backpack cover and shoulder armor is movable, giving improved flexibility in the arm joints.
  • Rear leg armor enables better range of motion in the ankle joints. 
  • Includes paintable material for the internal structure for easy detailing.
  • Accessories: Beam Saber x2, Beam Rifle, Shield, Hyper Bazooka

RM171.50
RM171.50 Request Stock
Quick View
img
SAVERM69.90

MG 1/100 MS-06J Zaku II Ver 2.0

  • A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  • With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  • Inner frame designed to accommodate a wide variety of Zaku designs.
  • Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Inner frame features a shell for the massive shoulder armor.
  • Outer shoulder armor is recreated with detachable spikes.
  • Redesigned ankle link boasts improved performance. 
  • New mobile dual action mechanism improves leg joint performance .
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM6.80

[009] SDBB MS-14B J-Ridden`s Gelgoog

RM17.10
RM17.10 Request Stock
Quick View
img
SAVERM6.80

[016] SDBB RX-77 Guncannon

RM17.10
RM17.10 Request Stock
Quick View
img
SAVERM6.80

[017] SDBB MS-06F/J Zaku II

RM17.10
RM17.10 Request Stock
Quick View
img
SAVERM40.00

Daban 6606 MG 1/100 MSA-0011(Ext) Ex-S Gundam

Daban 1/100 MSA-0011(Ext) Ex-S Gundam (MG)


Series : Gundam Sentinel
Grade : Master Grade (MG)
Manufacturer : Daban
Scale : 1/100
Code : 6606

Please note that this is NOT-Bandai product

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM33.90

[166] MS-06R-2 Johnny Ridden's Customize Zaku II

- The Crimson Lightning's customized Zaku II makes its long-overdue entrance into the HGUC line! -   

- Zeon ace, major Johnny Ridden's Zaku II's signature shape is recreated as an HGUC kit- its massive shoulder spikes and sweeping calf -   

thrusters accurately molded, using the HGUC Zaku II as a base model.

- Accessories: Zaku Bazooka, Zaku Machine Gun, Heat Hawk

RM74.00
RM74.00 Request Stock
Quick View
img
SAVERM28.90

[386] SDBB RX-105 Xi Gundam

Expand the line followed from char's counterattack, Gundam UC Gundam universal century series lineup! And from the popular "Hathaway's Flash" Finally, hero machine!

  • minovsky craft unit deployment
    Open and close the shoulder and chest armor!
    Flight form can be reproduced by minovsky craft unit deployment gimmick!

  • major armed base addition is also included!
    Also comes with a display base, beam rifle, beam Saber, and shield as well as the body and garsezon mountable.

  • Messer, garsezon included!
    Comes with MS manipulates the hero companions "Messer", save flight system 'garsezon'! You can be boarding!

  • eyes switched gimmicks
    By switching the eyes part sides, can be selected without eyes!

  • funnelmisail
    Funnelmisail injection effect parts! Can reproduce the firing scenes!

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM53.90

MG 1/100 RX-78-2 Gundam Ver.1.0

  • Bandai's Master Grade (MG) Gundam RX-78-2 is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980! 
  • Like all the kits in the MG Gundam series, the level of detail is superb and virtually everything moves. 
  • The panels on the Gundam RX-78-2's legs flip open to reveal internal mechanisms. The head has a panel, too. 
  • Even the "Core Fighter" cockpit ship can be removed from the Gundam RX-78-2's mid-section. 
  • Fine mesh parts cover the inside of the chest air intakes for added realism. 
  • Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit.

RM95.00
RM95.00 Request Stock
Quick View
img
SAVERM73.20

Bandai Gundam EX-18 Mobile Ship Argama Scale 1/1700

Bandai Gundam EX-18 Mobile Ship Argama Scale 1/1700

RM136.50
RM136.50 Request Stock
Quick View
img
SAVERM17.80

[001] HGUC 1/144 RX-77-2 Guncannon

RM30.10
RM30.10 Request Stock
Quick View
img
SAVERM86.90

MG 1/100 MS-14A Gelgoog Ver.2.0

  • The successor to the powerful and ubiquitous Zaku line, the Gelgoog is the next step in mass-produced Mobile Suits! 
  • Designed with perfectly balanced offensive and defensive capabilities, this is the first mass-produced Zeon Suit to feature beam weaponry, increasing its overall combat performance. 

  • Accessories: Beam Rifle x1, Under Barrel Grenade Launcher x1, Rifle Bipod x1, Beam Naginata x1, 1/100 Pilot Figure x2 (Sitting, Standing), Antenna x2, Shield x1

RM182.00
RM182.00 Request Stock
Quick View
img
SAVERM79.90

MG 1/100 MS-09R Rick Dom

  • This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.
  • Following on the heels of the Dom kit comes Bandai's Master Grade Rick-Dom. Differences with the first release are a different tail and backpack unit, different soles (of the feet), and new weapons, especially that huge beam bazooka. And of course, all the Master Grade goodies you'd expect are here! 
  • Fully posable at all joints; extensive internal detail; individually posable finger joints and more. 
  • Like all Master Grade releases, the kit is molded in color, and features snap assembly. Have fun!

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM199.90

MG 1/100 Shin Musha Gundam (Sengoku No Jin)

  • From the popular game series Dynasty Warriors Gundam, the Hajime Katoki-designed Musha Gundam is realized as a Master Grade kit! 
  • Utilizing the frame created for the Rx-78-2 Ver. OYW and clever parts separation, along with gimmicks for moving armor sections all add up one impressive Suit! 
  • Various weapons included, all of which can be mounted on the Suit for quick storage- the sword at the hip, and the other weapons mounted on the backpack. 
  • [Artillery Tanegashima] (rifle), [Tachi sun circle] (sword), comes equipped with a [spear diffuse round],
  • [Halberd lightning round] is attached. To the left hip armor the sword, spear, artillery, (each equipped with halberd armed to
  • It can be equipped with a backpack. )
  • Accessories: Nichirinmaru , Tanegashima Gun, Sankoumaru Jumonji Yari, Denkoumaru Naginata, Folding Screen, Spear Stand x2, Gun/Sword Stand

RM280.00
RM280.00 Request Stock
Quick View
img
SAVERM63.90

MG 1/100 RX-78-2 Gundam Ver. O.Y.W. 0079

  • This is RX-78-2 as it appeared in the PS2 "Mobile Suit Gundam: The One Year War" game. 
  • With Bandai's superbly flexible inner frame, over which sharply molded armor is placed, the final product can bend and pose in just about any position you might imagine. 
  • Parts are all molded in color and snap together; polycaps make the joints move smoothly. Bolts hold the frame together securely. Dry-transfer decals allow you to add exterior markings with precision.

RM128.00
RM128.00 Request Stock
Quick View
img
SAVERM74.90

MG 1/100 MSM-07 Z'Gok Mass Production Type

MG 1/100 MSM-07 Z'Gok 

RM105.00
RM105.00 Request Stock
Quick View
img
SAVERM40.40

P-Bandai Exclusive: RG 1/144 RX-78/C.A. Casval Gundam

  • RX-78/C.A. Casval Gundam finally appear in Real Grade model kits.
  • Comes with armor: beam rifle / Hyper Bazooka / beam saber / shield.
  • Suitable for age 15 and above / no abrasive is needed during assemble process.

RM179.60
RM179.60 Request Stock
Quick View
img
SAVERM79.90

MG 1/100 MS-09 Dom

This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.  
Bandai's Master Grade Dom is here! Whereas some of the kits in the Master Grade series have their overall appearance changed somewhat from the original Gundam animation, the Dom is quite true-to-form, retaining the short, stocky proportions of the original. But all the Master Grade goodies you'd expect are here! Fully-posable at all joints; extensive internal detail; individually-posable finger joints; numerous weapons, including the laser sword, machine gun, two bazookas and Panzerfausts. Most of these mount right on the Dom's back or hips for firing and/or storage. Of course, the kit is also molded in color, and features snap assembly. Have fun!

RM160.00
RM160.00 Request Stock

Showing 211 - 240 of 355 products