• Home
  • Showing METAL PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing METAL PARTS product(s)

Showing 121 - 150 of 161 products

Quick View
img
SAVERM107.00

[Metal Part] MG 1/100 MSN-06S Sinanju Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.Sinanju use Metallic eye (Green) x1Direct
2.Vulcan Canon x2drill 1.8mm hole, attached to point with minor cement
3.Shoulder thruster - Red C1 x4drill 1.5mm hole, attached to point with minor cement
4.Backpack Main thruster - Red C6 x2drill 2.0mm hole, attached to point with minor cement
5.Backpack Sub thruster - Red C5 x4drill 2.0mm hole, attached to point with minor cement
6.Energy Pipe x28Direct
7.Skirt Armor Thruster - Red C1 x4 drill 1.5mm hole, attached to point with minor cement
8.lateral Calf Armor Thruster - Red C1 x4 drill 1.5mm hole, attached to point with minor cement
9.Inner Calf Armor Thruster - Red C7 x4 drill 1.5mm hole, attached to point with minor cement
10.Back Calf Armor Thruster - Red C1 x2 drill 2.0mm hole, attached to point with minor cement
11.Shank metal hole - TE1 x4 attached on the backpack of Sinanju gundam
12.Lateral Vents 2.5mm x12 attached on the backpack of Sinanju gundam
13.Metal beads x50drill 1.5mm hole to attach on it.
14.Screw 1.5mm x30drill 1.5mm hole to attach on it.
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM21.60

[Metal Part] RG Char's Zaku Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check on the list below to find out the actual parts quantity.


Index		AccessoriesInstallation
1RG used Zaku Metallic LensDirect
2Energy pipe on headDirect
3Energy -  ?pipe on waistDirect
4Energy -  ?pipe on legsDirect
5Calf Ventdrill 2.5mm hole, to attached on the point; 10 units
6Backpack Red Colour Thrusterdrill 1.0mm hole, to attached on the point
7Soles Red Colour Thrusterdrill 1.5mm hole, to attached on the point
8Whole Body Armor screwsdrill 1.1mm hole, to attached on the point; 20 units
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • Tweezer straight/angled
  • Modelling kits cutter
  • Metal cutter
  • Plastic model kits cement
  • Magnifying glass

RM52.40
RM52.40 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] 1.5mm Flat Head Screw * 30 units

  • Package include 30 units of 1.5 mm flat head screws for modelling kits
  • Diameter of flat heat screw is 1.5 mm.
  • Thickness : 1.5 mm

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM4.20

[Metal Part] Mixed Flat Head Screw 3.5 , 4.0, 4.5 each 10 units

  • Package include 30 units of flat head screws for modelling kits, diameter as below
  • 10 units of diameter 3.5 mm
  • 10 units of diameter 4.0 mm
  • 10 units of diameter 4.5 mm
  • Total 30 units
  • Thickness : 1.5 mm

RM9.80
RM9.80 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] 2.0mm Flat Head Screw * 30 units

  • Package include 30 units of 2.0 mm flat head screws for modelling kits
  • Diameter of flat heat screw is 2.0 mm.
  • Thickness : 1.5 mm

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM10.00

[Metal Part] Stainless Steel Customize pile piling, hydraulic pipe - 1.0 mm (30 units)

Stainless Steel Customize pile piling, hydraulic pipe

Spec?Diameter 1.0 mm , Length 15 mm 

Quantity ?30 Pipe

RM8.00
RM8.00 Request Stock
Quick View
img
SAVERM20.70

[Metal Part] Zaku Metal shoulder thorn type ZC2 for HG / MG - 3 units

  • 3 units of zaku metal part shoulder throne type ZC 2.
  • Widest diameter: 5.2mm, length: 23.5mm
  • can fit with MG zaku modelling kits nicely and don't need any cement to be attach on the kit.

RM9.20
RM9.20 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C2, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C2)

  • Specifications : Maximum diameter 6.5mm, Height 2.0mm, Joint hole Diameter 1.5mm
  • Joint stick : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM2.05

[Metal Part] Stainless Steel Spring Tube - 2mm (1 Unit)

[Metal Part] Stainless Steel Spring Tube for Customization 


Spec : Diameter : 2 mm , Tube Length : 120 mm

RM1.95
RM1.95 Request Stock
Quick View
img
SAVERM2.05

[Metal Part] Stainless Steel Spring Tube - 2.5mm (1 Unit)

[Metal Part] Stainless Steel Spring Tube for Customization 


Spec : Diameter : 2.5 mm , Tube Length : 150 mm

RM1.95
RM1.95 Request Stock
Quick View
img
SAVERM2.05

[Metal Part] Stainless Steel Spring Tube - 3mm (1 Unit)

[Metal Part] Stainless Steel Spring Tube for Customization 


Spec : Diameter : 3 mm , Tube Length : 200 mm

RM1.95
RM1.95 Request Stock
Quick View
img
SAVERM4.00

[Metal Part] Stainless Steel Customize pile piling, hydraulic pipe - 1.5 mm (30 units)

Stainless Steel Customize pile piling, hydraulic pipe

Spec?Diameter 1.5 mm , Length 15 mm 

Quantity ?30 Pipe

RM8.00
RM8.00 Request Stock
Quick View
img
SAVERM61.60

[Metal Part] MG 1/100 Char's Zaku Metal Enhancement Part Set

MG 1/100 Char's Zaku Enhance Metal Parts Set


It contain 11 types of metal parts for MG 1/100 Char's Zaku II to enhance

1. Red Eye Zaku Metallic Lens x 1
2. Energy Pipe on Head x 1
3. Energy Pipe on Waist x 1
4. Backpack Thruster, C1 x 2 set
5. Arm Side / Shoulder Thorn Metal Spikes x 3 
6. Energy Pipe on Leg x 1
7. Leg Thruster, C2 x 8 set
8. Aviation Hole 1.6 mm x 15
9. Aviation Hole 2.0 mm x 15
10. Metal Silver Bead Ball 1.5 mm x 50
11. Flat Head Screw 2.0 mm x 30 

RM88.40
RM88.40 Request Stock
Quick View
img
SAVERM7.30

[Metal Part] 3mm S Energy Cable Tubes Pipes Metal Parts (Silver)

3mm (S size) Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm
Color : Silver

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM7.30

[Metal Part] 3mm S Energy Cable Tubes Pipes Metal Parts (Gold)

3mm (S size) Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm
Color : Gold

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM9.20

[Metal Part] Energy Cable Tubes Pipes Metal Parts (L Size, 5mm, Gold)

5mm (L size) Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 5mm
Color : Gold

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM10.40
RM10.40 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C3, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C4, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C5, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C5)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C8, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C8)

  • Specifications : Maximum diameter 12.0mm, Height 12.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B4, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B8, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B8)

  • Specifications : Maximum diameter 7.5mm, Height 7.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (N1, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N1)

  • Specifications : Maximum diameter 6.0mm, Height 6.0mm, Joint hole Diameter 1.4mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.4mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Silver)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Silver 

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM9.20

[Metal Part] Energy Cable Tubes Pipes (L size, 5mm, Titanium Black)

5mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 5mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM10.40
RM10.40 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Titanium Black)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM7.30

[Metal Part] Energy Cable Tubes Pipes (S Size, 3mm, Titanium Black)

3mm (S size) Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Gold)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Gold

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.3 mm , 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.3 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
RM8.45 Request Stock
Quick View
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.5 mm, 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.5 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
RM8.45 Request Stock

Showing 121 - 150 of 161 products