• Home
  • Showing MOBILE SUIT GUNDAM product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing MOBILE SUIT GUNDAM product(s)

img MOBILE SUIT GUNDAM

Showing 241 - 270 of 364 products

Quick View
img
SAVERM11.20

[BB321] Bacho Blue Destiny

The "Blue Destiny," a.k.a "Shin-i no Kin-Bacho," rides forth from the new Sangokuden series! Armor can be removed and hair parts can be reversed to transform from normal to berserker mode. Knob on head can be turned to transform eyes from normal to berserker mode. It includes the Shiryu Gokurenso weapon, which can be disassembled into multiple swords and spears.

RM22.70
RM22.70 Request Stock
Quick View
img
SAVERM143.30

MG 1/100 RX-78-2 Gundam Ver.2.0 (Titanium Finish)

  • From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  • Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  • Equipped with a movable core fighter! 
  • Includes Stand to display the Core Fighter.
  • Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer

RM297.60
RM297.60 Request Stock
Quick View
img
SAVERM240.90

PG 1/60 MS-06S Char's Zaku II

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

Weight : 1650g

RM420.00
RM420.00 Request Stock
Quick View
img
SAVERM91.90

MG 1/100 RX-75 Guntank

  • Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  • Linked movement for the caterpillar, allowing flexible movement. 
  • Caterpillar has the feature of resistance to the surface when rotating. 
  • Dozato Carrier in front and behind the chassis can be deployed. 
  • Stands included to show the docking sequence of Core Fighter to Guntank. 
  • Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  • LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg

RM196.00
RM196.00 Request Stock
Quick View
img
SAVERM51.60

MG 1/100 RB-79 Ball (Shark Mouth)

  • A new paint scheme and shark-mouth marking, and the removal of the bar at its front top, dress up this twin sibling of the MG Ball Ver. Ka (Katori Version). 
  • Includes clear "Gundam Stickers" with various in-scale warnings and markings on them. 
  • Once built and clad in its armor, the posable Ball can be displayed on the included stand and base (includes figures of two standing mechanics and a seated pilot).

RM80.30
RM80.30 Request Stock
Quick View
img
SAVERM11.90

[200] SDBB GUNDAM RX-78-2 (G-Generation O)

BB-200 GUNDAM RX-78-2 Simple instruction included in a box. Weight: 500g


(G-Generation O)

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM5.90

[221] SDBB Guntank

BB-221 Guntank Simple instruction included in a box. Weight: 500g

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM106.00

MG 1/100 MSA-0011 S Gundam

A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 


Although the S Gundam had three separate cockpits, the other two were not used until the very end of the plot, where three pilots would be saved by the core block system (see below). Since its plans are highly classified, it is said in chapter 1, Revolt in Pezun, that the pilots have been only able to train in Z Plus B types, which are the highest performance transformable mobile suit they have access to. The S Gundam is equipped with relatively heavier armour than its Z Plus cousin, which is specifically mentioned in the story (Chapter 2:Sally Forth! S Gundam) where the 2 Z Plus C1 accompanying the S Gundam in its booster configuration took more damage even though S Gundam was at a much higher acceleration when against enemy fire. To further confirm this point, the author mentions that the pilot cannot even bear to imagine what will happen if they are using Neros or GM IIIs in the same situation. Within the design notes, the offensive capabilities of the S Gundam featured a highly accurate beam smart gun, with 12MW power operating the beam smart gun normally, the unit can connect the beam smart gun to two extra power outlets on both left and right hips or the centre of its belly, to supply extra power that increases the beam smart gun up to 56MW. 

However, this will have to sacrifice the mounting of one of the two 12MW beam guns that are similar to the ones used in the Zeta Plus mobile suit series. Two beam cannons protruded from the S Gundam's backpack over the shoulders, and it also featured four 60 mm vulcans in the tail stabilizer and four 60 mm vulcan guns in the head, in which the mechanical designer, Katoki Hajime, specially took the problems of this weapon in the pass series into account, including the barrel length being too short which means the weapon can only have grenade launcher effects as well as no space for ammo, and lengthened the barrel (also the depth of the head of S Gundam) and introduced the liquid explosives electronic firing mechanism to the design[2], in which later retconed earlier designs and is again mentioned in Gundam Officials, the Gundam Encyclopedia and Master Grade instructions. It also featured a red circular-shaped wire-guided remote beam weapon called an Incom that was stored in the forehead. And finally, to round out the S Gundam's weaponry, the unit featured two beam sabers stored in recharge racks in the small white protrusions in the unit's knees. The S Gundam is built on a modular design, made up of two separate transformable units that could combine with a core fighter variant called the G Core to create the full S Gundam. The S Gundam was capable of separating into the 3 crafts. The G-Attacker (also referred to as the A Parts) is one of the crafts, which was made up of the upper torso area of the S Gundam. The second craft was called the G-Bomber (also referred to as the B Parts), which were composed of the lower torso and legs of the S Gundam. 

The G-Core core fighter, which were the C Parts of the S Gundam, was flown by Ryu Roots. The story used this mechanism as a make shift role for the task force alpha not having enough mobile suits for the battle and has to compromise by separating the S Gundam for 3 pilots in chapter 12, Pursuit. The author also made his own disbelieve in combining robots[4] in the midst of battle into the plot, where S Gundam is forced to combine back into the mobile suit form and sacrifice of the 3 pilots' instructor was made by being their shield in order to buy them time for the combination in chapter 13, Triple Attack. A.L.I.C.E. The S Gundam in Gundam Sentinel featured a unique and incredibly complex artificial intelligence computer that went by the acronym name A.L.I.C.E., which was developed by Ryu Roots' mother, Meith Roots. A.L.I.C.E., which stood for Advanced Logistic & Inconsequence Cognizing Equipment, was more than the standard learning computer featured in earlier mobile suits; "she" had the capability to think and to grow. The growth of ALICE is one of the main plot lines to the story, compared to the growth of the main character Ryu Roots. In "her" early stages of growth ALICE was not yet a full individual, but "her" experiences with Ryu Roots would help "her" to grow. ALICE is originally programmed to place the pilot(s) life as first priority, and could assume total control of the S Gundam if "she" felt that the unit was in danger. 

This function has been used throughout the plot to save the pilot's life and caused confusion to the pilot since Ryu Roots has no knowledge of ALICE's existence even towards the very end of the story. Although 4 S Gundams have been produced, it is known that the other 3 S Gundams do not have the ALICE system installed on it. 

Stories source from: http://en.wikipedia.org Total 505pcs parts Simple Instruction included in a box.

RM224.90
RM224.90 Request Stock
Quick View
img
SAVERM39.80

[114] HGUC 1/144 RB-79 Ball Twin Set

* HGUC release the ball from the set of 2! 
* Ball-inspired style Fasutogandamu version. 
* Appeared in Platoon 08 180mm cannon in addition to the low recoil, comes with twin Fifutinkyariba expression. 
* Comes with display base. 
* The camera reproduced with clear parts. 
* Movable arm portion. 
* Will be set two. 

Accessories: low recoil cannon base × 2,180 mm × 2, twin Fifutinkyariba

RM56.00
RM56.00 Request Stock
Quick View
img
SAVERM39.90

Gunpla Starter Set : HGUC Gundam Vs. Zaku II

A 2 pack featuring the iconic mecha from the original Mobile Suit Gundam TV series includes the RX-78-2 and also the Zaku 2. 


Both feature their High Grade Universal Century kit designs and come complete with their original weapon configurations. 

This special 2 pack also includes a how to guide providing pictorial steps on how detail Gunpla and go farther beyond simple straight assembly. 

Runner x 8 
Instruction Manual x 1

RM80.00
RM80.00 Request Stock
Quick View
img
SAVERM40.50

MG 1/100 RB-79 Ball Ver.Ka (30th Anniversary)

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

RM79.40
RM79.40 Request Stock
Quick View
img
SAVERM59.90

[001] RG 1/144 RX-78-2 Gundam

  • Runner x 10, Realistic decal x1, Instruction manual 
  • A new series REAL GRADE (RG) rolls out in July 2010. 
  • A new brand of plastic model kit that pursues realistic representation with the latest technology for all those who know Gundam. A highly detailed model that has dynamic action and gimmicks. A pre-constructed inner frame makes assembling stress-free. 
  • All settings of RX-78-2 Gundam are consolidated into the 125mm tall body. 
  • Having an inner frame "Advanced MS Joint" which makes it possible to move dynamically with fewer parts. 
  • Attached the "Realistic Decal" that pursues reality with special material.

RM90.00
RM90.00 Request Stock
Quick View
img
SAVERM156.90

MEGA SIZE 1/48 MS-06S Char's Zaku II

  • Char's Zaku came from all Gandamufan Megasaizumoderu dedicated to big models! 
  • Ease to assemble the pipe liner lock mechanism in the adoption of power! Of course, also supports moving! 
  • Daburusepareta mono eye is included in the mobile! 
  • Children's fingers can easily ?Kasemasu. 
  • Their own tools - and is ... Megasaizumoderu Daburusepareta to help take the parts from the runner. 
  • RG also adopted a new panel line. 
  • Without any discomfort - RG Megasaizugandamu reproduced alongside the panel lines. 
  • RG shape conforms to the design of the backpack! 
  • Great! Easy to make! Fun! Megasaizumoderu POINT1: No special tools required for assembly. Nipper can not use. 
  • POINT2: Snap adopted without glue to assemble. 
  • POINT3: hearty! Ganpurasuteppuappumanyuaru come. 
  • POINT4: fun and fast-lock type runner. 
  • POINT5: Easy to assemble in Daburusepareta. 
  • POINT6: assembly instructions and color illustrations, intuitive icons that the necessary parts (symbols) is adopted. 
  • POINT7: Iropura because, without a finished painting cool! 
  • POINT8: uses a special decal, Ditiruappu challenge! 
  • Accessories: Zaku machine gun, heat hawk

RM273.00
RM273.00 Request Stock
Quick View
img
SAVERM239.90

PG 1/60 RX-78-2 Gundam

This item is a posable, Perfect-Grade injection-plastic kit of an item from the Gundam universe. 626 parts. 31cm high when completed. 
Things don't get much better than this for Gundam fans.

The kit that Bandai has produced is truly amazing. The most striking aspect is the incredible level of INNER detail. It's almost a shame to put any of the cover panels on this thing, because there is so much on the inside that a little silver and black paint will make very interesting to look at. Bandai is aware of this, and is also going to market an optional parts set for the kit that includes transparent body pieces! This is due in December, we're told. That set will also include a light-up beam saber.

What can you say about this kit? Though some weapons are not included (no doubt for a later release), it's just about everything you could hope for in terms of detail and poseability. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this. Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece will be completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM480.00
RM480.00 Request Stock
Quick View
img
SAVERM16.60

HGUC 1/144 RX-78-2 Gundam (Ver.G 30th)

RX-78-2 Gundam Ver.G 30th

RM50.30
RM50.30 Request Stock
Quick View
img
SAVERM80.10

MG 1/100 MSM-04 Acguy (w/clear parts)

RM159.80
RM159.80 Request Stock
Quick View
img
SAVERM61.30

MG 1/100 Z'gok (w/clear parts)

A target model kit of the MG clear parts campaign to celebrate Gunpla 30th anniversary! Comes with 1 clear body parts runner. You can enjoy the inner structure through the clear body parts.

RM118.60
RM118.60 Request Stock
Quick View
img
SAVERM56.90

MG 1/100 RX-77-2 Guncannon

A highly detailed 1/100 model of the Gun cannon from the original Mobile Suit Gundam. Features internal skeleton in legs that outer armor can detach from, showcasing the mechanical features of the design. Includes alternate missile pod attachment to replace the cannons as well as working core fighter that can transform. Includes faction markings in the form of dry transfers and stickers.

RM123.00
RM123.00 Request Stock
Quick View
img
SAVERM91.20

MG 1/100 MS-09 Dom

MS-09 Dom (MG)

RM148.70
RM148.70 Request Stock
Quick View
img
SAVERM31.90

[121] HG 1/144 Extreme Gundam

  • EXTREME VS. Major Model appeared in the original MS Ekusutorimugandamu!
  • Discovery of a new action by the militants pose a motif instrument.
  • The four parts are included wrist, expand the range of expression.
  • The guitar can be stored in the shield-type rifle.
  • Reproduced in blue light-emitting clear parts.
  • Accessories: beam rifle, beam saber, shield

RM64.00
RM64.00 Request Stock
Quick View
img
SAVERM54.90

MG 1/100 RX-78-2 Gundam Ver.1.5

  • MG RX-78-2 Gundam (Ver.1.5)
  • This update to the original MG RX-78-2 features enhancements including a prebuilt internal skeletal leg and deisgn appearance similar to the Perfect Grade Gundam as well as including weapons like the Gundam hammer and Beam Javellin. Core Figther, beam, sabers, beam rifle, bazooka still included!.
  • Upgrade product of the master's first grade! !

RM125.00
RM125.00 Request Stock
Quick View
img
SAVERM29.94

GUNPLA STARTER SET 2

Starter Pack # 2. For those looking to get into the Gunpla Hobby, here's the perfect fit. This set will include the HG RX-78-2 Ver. G30th and come with a 'Step Up Manual' which will show you little tips and tricks to give your model a better look. It will also come with a Gundam panel line marker!

RM54.00
RM54.00 Request Stock
Quick View
img
SAVERM27.40

[007] HGUC 1/144 RX-75 Guntank

Driven by the pudgy Hayato, and almost as regular a fixture in the original anime as Amuro and the Gundam, the Guntank has languished for years with only a sub-par kit to represent it. Bandai has now corrected this injustice with a top-quality HG rendering of this long-time favorite! Tracks are made of flexible, easy to assemble plastic strips, but they don't move on the completed kit. Arms, back cannons and cockpit/head are posable. Molded in the final colors and featuring snap-fit assembly.


Item Size/Weight : 25.5 x 19 x 5.5 cm / 218g

RM38.50
RM38.50 Request Stock
Quick View
img
SAVERM12.70

[009] HGUC 1/144 MS-07B Gouf

Item Size/Weight : 25.5 x 19 x 5.5 cm / 218g

RM35.20
RM35.20 Request Stock
Quick View
img
SAVERM65.90

MG 1/100 RX-78-2 Gundam Ver.O.Y.W 0079 Animetion Color

Molded in the colors used in the classic "Mobile Suit Gundam" anime series, this version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor, and comes armed with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.


Wikipedia Information
The RX-78-2 Gundam(aka Gundam) is the titular mobile suit of Mobile Suit Gundam. Part of the RX-78 Gundam series, It was built in secret on Side 7, the Gundam would turn the tide of war in favor of the Earth Federation during the One Year War. The unit was primarily piloted by Amuro Ray.

The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium, its frame was both lighter than that of Zeon's mass-produced Mobile Suits and much sturdier, able to shrug off a Zaku's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zeon Zakus. The Gundam would engage in most battles with its Beam Rifle making it the first Mobile Suit to have firepower equivalent to a battleship beam cannon. In addition, it made use of two beam sabers, a blade of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance than the blade of the saber would allow.

The Gundam also used more conventional weaponry: it could be launched with a Hyper Bazooka, the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan cannons, providing it with a last resort weapon as well as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the Gundam Hammer - a large weapon similar to a flail which could be swung at enemies to deal crushing damage.

The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the Hyper Hammer. Lastly, it wielded a large shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot Amuro Ray would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.

In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Boa Qu to improve its reaction times, the joints of the Gundam were given a Magnetic Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".

The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the Gundam be too heavily damaged and gives the pilot a chance to escape from battle.

Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull

Weapons
  • 60mm Gatling Cannons "Vulcan Gun"- The Vulcan cannons were 60mm Gatling Guns stored on the sides of the Gundam's head. Having the greatest rate of fire of all the Gundam's weapons these are primarily used to ward off advancing enemies, shoot down missiles, or hit other fast moving targets. They also made good use as an anti-aircraft and anti-personnel weapons. The Vulcan cannons however had a hard time piercing heavy armor (Though they had shown the ability to do severe damage to Mobile Suit's if fired at point-blank range)and thus were not often used against larger, more heavily armored foes. Still the Vulcans were useful in preserving ammunition for the Gundam's more powerful weapons such as the Beam Rifle.
  • BAUVA*XBR-M-79-07G (Bauva eXperimental Beam Rifle Medium-range) - A revolutionary weapon for it's time, the Beam Rifle is the primary weapon used by the Gundam. Making use of the Federations E-cap (or "energy capacitor") technology, the rifle uses charged concentrations of Minovsky particles as ammunition. This gives the beam rifle firepower equivalent to that of a battleship's beam cannons. As the Minovsky particles destroy matter on a molecular scale, the beam rifle can penetrate even the thickest armor and destroy its target with a single shot. One weak point of the rifle was its energy limits. The rifle could only be fired 16 times before depleting its energy and becoming useless.
  • Beam Saber- The Gundam was the first mobile suit to ever use a beam-oriented weapon in melee combat. The sabers are stored on the backpack, and can transform from saber to the Gundam Javelin, a large pole with a three pronged beam at the end. The beam sabers use Minovsky particles held in place by an I-Field to form an effective cutting surface that can slice through nearly any material. The particles for the beam sabers are stored by E-cap in the hilt of the saber, which is recharged from the Gundam's reactor when the saber is returned to its socket. Once activated, beam sabers do not rely on the mobile suit's reactor and can be thrown or discarded as decoys. The beam saber is most often used for close range combat or as an emergency weapon once all other ammunition has been depleted.
  • Gundam Hammer/Hyper Hammer - A rather unusual weapon, the Gundam Hammer was essentially a large spiked ball attached to a chain. It was used to give the Gundam a ranged melee weapon. The Gundam could either throw or swing the Hammer around itself in order to impact and damage its target through the sheer mass of the hammer. Later, it was upgraded into the Hyper Hammer and had several rockets mounted into the ball in order to give it use in space allowing it to maneuver in zero-gravity also the ability to change it's direction before impact, and to increase the damage it could cause.
  • BLASH*XHB-L-03/N-STD (Blash eXperimental Hyper Bazooka Long-range) - Similar to the Zaku's Bazooka, the Hyper Bazooka was a heavy weapon used by the Gundam. Technically a large rocket launcher it could fire several 380mm missiles to attack targets at long range. While very powerful the Hyper Bazooka had a slow rate of fire and fairly little of ammunition. Most oftenly used to take out slow, heavily armored targets.
  • RX*M-Sh-008/S-01025 (Renpou [Federation] eXperimental Medium Shield) - Hand-carried, forearm-mounted or stored on the Gundam's backpack, the shield is a simple defense used to block most incoming ballistic and explosive projectiles. Also used to great effect in close quarters battle with enemy mobile suits. Has a view port than can be sealed off with an internal blast plate. The shield is also used to deflect heat away from the mobile suit when undergoing atmospheric re-entry.
  • Core Block System - The initial idea of the Core Fighter was as a form of escape if the Gundam were to be destroyed, allowing the irreplaceable data collected by the learning computer and the pilot to escape from a replaceable machine. Another idea was that the Core Fighter could be launched into the field as a support fighter, and the A and B blocks could be delivered by another vehicle (the Federation developed a support unit, the Gunperry, for this role) if needed for a mid-air conversion into a mobile suit.
  • Learning Computer System - A critical component of the Gundam's success in combat, the Learning Computer System was similar to a modern day black box. It recorded the data from each of the Gundam's battles for further use. However, the system could also actively learn and improve the capabilities of the Gundam, explaining why Amuro had such difficulty fighting two Zaku IIs on his first try but managed to hold off ace pilot Char Aznable at Luna II.
  • Re-entry Coolant System - The re-entry system is used for only emergencies when the Gundam is falling to Earth and has no chance of reaching its carrier. The coolant system acts as a large heat-resistant film which lowers the Gundam's temperature when descending to Earth.

RM126.00
RM126.00 Request Stock
Quick View
img
SAVERM51.90

[050] HGUC 1/144 G-Armor Gundam

Two kits in one, this HG G Armor kit comes with parts to build the G Fighter and the RX-78-2 Gundam! Not a speck of detail is lost, even in this fairly small scale; The G Fighter can transform into the G Blue, G Blue E-z, G Sky, and G Sky E-z, when completed. The RX-78-2 is transformable, too (well, its lower half comes off!) to allow you to build the Gundam Sky. Neat PVC caterpillar tracks are included for the G Blue and G Blue E-z (the tracks can also be retracted into the body of the main machine), and an unbuilt display base allows you to show off the various modes to their very best effect! Of course all the parts are molded in coloured plastic, and snap together, so no paint or glue are required. Polycaps are included for all the movable joints; foil stickers are included for detail. Don't miss out on this terrific set!

RM116.00
RM116.00 Request Stock
Quick View
img
SAVERM69.90

MG 1/100 MS-06J Zaku II Ver.2.0 (w/clear parts)

Over a decade since the first MG Zaku II kit release and several MG Zaku II variations later, this Zeon MS finally gets the "Ver. 2.0" treatment with a completely revamped inner frame construction that allows for even greater range of articulation and realistic movements--you can even pose it kneeling on one leg as seen in the show! Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly. Weapons include a Zaku machine gun, Zaku bazooka, heat hawk, and a pair of three-tube missile pods. Two types of blade antennas are thoughtfully included if you plan on building a Zaku II commander mass production type MS, plus two 1/100-scale pilot figures are also provided to man the MS. An incredible kit that's not to be missed!

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM8.90

[020] SDBB RX-78-2 Gundam with G Armor

- The game was released in the summer of 99 [SD Gundam G Generation-0] in the kit appeared MS now.

RM20.00
RM20.00 Request Stock
Quick View
img
SAVERM24.90

[064] HGUC 1/144 MS-05B Zaku I

  • Reproducible shoulder tackle.
  • Bazooka armed rack, Zakubazuka, Zaku machine gun, shield, Shutsurumu file
  • Usuto supplied, the Heat Hawk. Zakubazuka can be attached to the rear armor.
  • Mono movable by moving the lever on the back of the head.
  • The pursuit of the detail comes with a wrist.
  • The double elbow joints, expanding the range of movement

RM35.00
RM35.00 Request Stock
Quick View
img
SAVERM45.90

[073] HGUC 1/144 Gaplant TR-5

- Based on the popular manga series "Advance of Zeta: The Flag of Titans" and designed by Kenki Fujioka.


 Gaplant TR-5 Hrairoo is variation of the original Gaplant as seen in the Zeta Gundam anime series but with slightly more armor and powerful weaponry at its disposal. 
- Once assembled, Gaplant TR-5 is transformable into mobile armor mode and comes with a display stand to hold it in both modes. 
- Custom marking decals are also provided.
- Come with Stand 

RM98.00
RM98.00 Request Stock

Showing 241 - 270 of 364 products