Price Clear







Search for: "zeta"

Showing 1 - 30 of 32 products

img
SAVERM325.90

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM775.00
RM775.00 Add to cart
img
SAVERM64.90

[010] RG 1/144 Zeta Gundam

  • RG Series A New undergone into new, 10th bullet is memorable Zeta Gundam!
  • RG series that appeared to commemorate the 30th anniversary of Gundam. Two years from the start-up series. Of Gunpla
  • As its 10th anniversary of RG series you should aggregating the technology that can have, the pursuit of real, finally
  • Zeta Gundam appeared -.
  • The actual own investigation RG, accurately reproduced in 1/144 scale mechanisms of Zeta Gundam!
  • Adopt a new joint MS Advanced mode.
  • Comes with realistic decals.
  • Accessories: beam rifle, shield, grenade × 2, beam saber × 2,
  • Shield launcher, action-based support joint 2, 1/144 pilot figure (Camille)

RM115.00
RM115.00 Add to cart
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Zeta Gundam

[Da Lin] Water Decal for RG 1/144 Zeta Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Zeta Gundam Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM81.00

DABAN 8801 MG 1/100 MG GUNDAM ZETA 2.0

Daban MG 1/100 Zeta Gundam Ver.2.0 

 Brand : Daban 
Code : 8801
Series : ZZ Gundam 

 Please note that this is not Bandai Product.

RM99.00
img
SAVERM13.00

Daban 8824 MG 1/100 MSZ-006 P2/3C Zeta Gundam Red Zeta Gundam

Daban 8824 MG 1/100 MSZ-006 P2/3C Zeta Gundam Red Zeta Gundam

Brand : Daban
Scale : MG 1/100

Please note that this is not Bandai product

RM125.00
RM125.00 Add to cart
img
SAVERM155.40

MG 1/100 Zeta Gundam Ver.Ka

Marking the 20th anniversary of the Master Grade Ver.Ka series is the incredible MG Zeta Gundam Ver.Ka from "Mobile Suit Zeta Gundam"!

The proportions of the Gunpla are based on Kazumi Fujita's sketches of the Gundam for the anime. The structure and shape have been refined to ensure that there is no breakdown in the form between both the MS form and the Waverider form, and the transformation mechanism has been expertly constructed.

The MS form has a wide range of motion, allowing for a greater degree of recreation of poses from the show. The Waverider form can be displayed in a stable manner like a fixed aircraft model by providing a locking mechanism for each part.

The MG Zeta Gundam also features parts with metallic extra finish processing, along with water transfer decals designed by Katoki Hajime.

RM234.00
RM234.00 Add to cart
img
SAVERM80.10

MG 1/100 Zeta Gundam (Special Coat Ver.)

To commemorate the 20th anniversary of Gundam, Bandai has released the Master Grade Zeta Gundam kit in an all metal-plated version. Quite an interesting effect. Includes figure of Camille Bidan.

RM159.80
img
SAVERM29.60
RM59.30
img
SAVERM113.90

MG 1/100 Zeta Gundam Ver.2.0 (HD Color)

HD Color (Limited Version) !!!A limited edition version of the Zeta Gundam 2.0 released in conjunction with the Blu-Ray edition of "Mobile Suit Z Gundam" Molded in a glossy plastic and includes foil-stamped original markings and HD decals. Features an enhanced transformation system that improves the proportions in both Mobile Suit and Wave Rider modes. Redesigned joints for Mobile Suit mode plus the addition of a waist that can twist for a fusion of posability and transformability. Accessories include a beam rifle, beam saber, shield, grenade pack, and Hyper Mega Launcher.

RM186.00
img
SAVERM73.90

MG 1/100 Zeta Gundam Ver.2.0 (w/clear parts)

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts! Simple instruction included in a box! Z Gundam's wiki The MSZ-006 Zeta Gundam, designed by Kazumi Fujita, is a fictional weapon of the anime Mobile Suit Zeta Gundam from the Universal Century timeline of the Gundam metaseries. Its popularity has led to many variations, upgrades, redesigns and influenced later design works such as the Zeta Plus[2] and the Wing Gundam. It is also the only mobile suit having a real, pilotable, down-scaled, 7-metre-tall, hydraulically controlled model built. The name "Zeta Gundam" is the eponymous Gundam in which the suit appears, Mobile Suit Zeta Gundam, which is the sequel of Mobile Suit Gundam. The suit however is first deployed mid-series as a reinforcement suit. It was piloted by the series' main character Kamille Bidan until the end of the series. The Zeta Gundam also became the starting mobile suit of the main character Judau Ashta of the sequel Mobile Suit Gundam ZZ before he switched to the more powerful MSZ-010 ZZ Gundam. The Zeta Gundam eventually sustained heavy damage and was abandoned at the conclusion of the first Neo Zeon movement. The unit has also appeared in most of the Super Robot Wars game series, which is famous for featuring different mecha of many anime franchise together in one mixed story. Inside the Gundam franchise, it has been featured in the PlayStation game Gundam Battle Assault (Gundam: The Battle Master 2 in Japan), the PS2 game Mobile Suit Z Gundam: AEUG vs. Titans and PSP's Gundam Battle series. It is also one of the featured units in the March 2007 release of the PS3 and Xbox 360 game Dynasty Warriors: Gundam, a spin-off series of the Koei game Dynasty Warriors. Three variant units are also featured in Episode 9 of Gundam Evolve.[10] In the SD Gundam manga Double Zeta Kun kokoniari(ダブルゼ-タくんここにあリ, Little Double Zeta is here), Zeta Chan is the main female character, a girl version of Zeta with only the V antenna and the name recognizable. Source: http://en.wikipedia.org

RM196.00
img
SAVERM59.90

MG 1/100 MSZ-006C1 Zeta Plus C1

  • MSZ-006C1 Zeta Plus C1
  • Equipped with trademark Beam Smart Gun.
  • Able to transform into Wave Rider mode, this kit uses ABS and screws to ensure proper joint connections.
  • Backpack equipped with propellent tank.
  • Rear wings completely adjustable for a variety of poses
  • Accessories: Beam Smart Gun, Hip Beam Cannon x2
  • Item Size/Weight : 33 x 24.2 x 12.5 cm / 800g

RM120.00
img
SAVERM35.40

[041] HGUC 1/144 MSZ-006 Zeta Gundam

HGUC MSZ-006 Zeta Gundam 1/144

RM60.50
img
SAVERM99.90

MG 1/100 Zeta Gundam Ver.2.0

  • Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  • It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  • Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  •  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  • However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).

RM200.00
img
SAVERM68.30

MG 1/100 Zeta Gundam

  • Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. Not surprisingly, the robot of the same name was the main piece of hardware in the show. This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. Perhaps more impressive is the fact the this new Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). The new 1/100 MG Zeta Gundam is probably the most highly-engineered model Bandai has ever produced. Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those yellow antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. A watch battery can be installed to light up the cockpit of the Wave Rider (bulb included). And the kit also comes with the "Hyper Mega Launcher" (not shown in these photos and yes, that's really what it's called) -- a huge super-cannon that the Zeta uses to blast enemies from the sky in one shot (the cannon is about 30cm or 12" long when completed!). Also includes the usual "beam saber" sword, and little grenades that fit into operable hatches on the ends of its forearms. The Zeta in "Wave Rider" mode, seen from the top and bottom. This transformation takes place without any parts needing to be removed from the kit! All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. - red colored LED light included attached by the wings behind. - transformable into a "waveraider" (plane format). - decals included - sold only with 109.90; budgeted and worthwhile. MG MSZ-006 Zeta Gundam

RM111.60
img
SAVERM19.90

[198] SDBB Zeta Z Gundam 006

  • Second bullet G DeGeneres special set.
  • Set contents · RX-78 Gundam Titans color version Hyakushiki gold plating type
  • It is a set of three or more of the Zeta Gundam Perfect Grade color version,.
  • Basic specifications are the same as those of normal type.

RM20.00
img
SAVERM45.90

[182] HGUC 1/144 Zeta Plus (Unicorn Ver.)

A variant of the popular Zeta Gundam, this transforming mobile suit has been faithfully re-created to match its appearance in episode 7 of Gundam Unicorn. Transformation to wave-rider mode is accomplished through the use of part swapping. Includes rifle, shield, hip cannons and 2 beam sabers.

RM98.00
img
SAVERM34.80

MSZ-006 Zeta Gundam Head Display Base

  • Not painted product
  • Gundam Model in the Picture is not included
  • Suitable for HG or RG (1/144 Scale)
  • 100% Brand New
  • The Item is made of PVC & ABS BY QY MODEL
  • NOT BANDAI PRODUCT

RM25.10
img
SAVERM40.14

P-Bandai Exclusive: MG 1/100 MSZ-006-3b Zeta Gundam III B Type Gray Zeta

  • This is P-Bandai Japan Exclusive limited release item.
  • Zeta Gundam Unit 03 B-Type Gray Zeta appears in Gundam OVA "Gundam Evolve"
  • It can transform into fighter mode and battroid mode as per Zeta feature.
  • It will comes with beam cannon, mega gatling, beam saber
  • This is pre-painted plastic model kits and require snap-fit assembly only.
  • 「增強了火力的Z高達改良機」以Z高達3號機作為原型,改良成為著重火力的機體,隨着武器裝備而令到重量增加,追加兩腳部分的輔助推進器及左右兩邊展開的大型平衡推進翼尾等,運動性能方面亦作出了改良。GRAY WOLF乘坐的機體,雖然被通稱為「GRAY(灰色) ZETA」,但因機身表面塗上了抵禦鐳射的塗層,所以機身變成為黃色。

RM349.60
img
SAVERM124.90

[Limited Edition] RG 1/144 Zeta Gundam (GFT. Ver.)

RG 1/144 Zeta Gundam 3 Ver. GFT (LIMITED)

RM274.10
img
SAVERM92.00

P-Bandai Exclusive: RG 1/144 MSZ-006-3 Zeta Gundam Unit 3 (Karaba's Custom)

P-Bandai Exclusive: RG 1/144 MSZ-006-3 Zeta Gundam Unit 3 (Karaba's Custom)

RM207.90
img
SAVERM110.00

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]

Reissue Date : Feb 2020
Estimate Delivery : Mar 2020

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM390.00
img
SAVERM39.80

[203] HGUC 1/144 Zeta Gundam (High Acceleration)

HGUC 1/144 Zeta Gundam (High Acceleration)

  • Estimate Arrival: Late June 2017
  • Towards the Gundam 40 anniversary `GUNPLA EVOLUTION PROJECT` start-up! The first step is HG brand than Zeta Gundam appeared !!
  • Of this time EVOLUTION POINT (evolution point) [action]!
  • And the best proportions in each form, within the constraints to adopt a replacement deformation mechanism of the wave rider, the pursuit of `` moving, realized poses close to the drama in the image!
  • Gekichu just like the dynamic action poses is possible!
  • Replacement deformation in the wave rider form
  • HG highest ever level of range of motion in a variety of poses is possible !!
  • Reproduce the best proportions in each form in the latest format
  • `Is the EVOLUTION POINT` by a movable gimmick that has been built in various parts of the range of motion, which was realized in the [action], it can be conventional more than posing representation!
  • Replacement deformation mechanism of the wave rider
  • To pursue the proportion of as aircraft, taking into account the ease and strength to make. Reproduce the hold up arms.
  • Chest, reclassified, such as the base parts for wave riders limbs. It can be modified with a small remainder parts. ※ existing HG comparison
  • The new color reproduction
  • Camera eye in clear parts specification, reproduce the color of the details. Also reproduced color of the beam saber.
  • Rich armed shipped
  • Comes with a variety of armed was used in the movie, such as Hyper-Mega-launcher of large weapons.
  • Arm of the grenade launcher is also reproduced.
  • Accessories: beam rifle × 1, arms grenade launcher (left and right) × 1 each, hyper-mega launcher × 1, beam saber × 2, shield (including grenade launcher) × 1, for Wave Rider joint × 1 equation

RM68.00
img
SAVERM72.40

P-Bandai: HGUC 1/144 MSZ-006 Zeta Gundam (Wave Shooter Equipment Type)

P-Bandai: HGUC 1/144 MSZ-006 Zeta Gundam (Wave Shooter Equipment Type) 

RM127.60
img
SAVERM19.90

[05] SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM

SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM


- Zeta Gundam, the protagonist of [Mobile Suit Z Gundam] appears in the series that can enjoy two silhouettes [SD Gundam Cross Silhouette] series!

- Reproduce distinctive coloring.
- Combined with [SD Gundam Cross Silhouette Frame] (sold separately), it is possible to upgrade high head and improve mobility.
- [Z Zaku] that appeared in [ZZ Gundam] in combination with [SD Gundam Cross Silhouette Zaku II] can be reproduced.

- accessories
Beam rifle x 1
* Shield (grenade launcher) x 1
* Beam * saber x 1

- Product content
* Molded product x 3
* Foil seal x 1
* Instruction manual x 1

RM40.00
img
SAVERM46.00

[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf

[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf


- This is a Non-Bandai product.
- Master Grade 1/100 Scale.
- Included launching action base and water decal.
- Transformable kits.

The MSZ-006-3B Zeta Gundam 3B Type (also "Gray Zeta") is a variant of the MSZ-006 Zeta Gundam piloted by former Zeon ace Shin Matsunaga (codename "Gray Wolf"), who calls it "Buster", and appears in the Gundam Evolve 9 CGI episode where it engages in battle with the QRX-006 Geminus, assisted by two other Zeta units.

RM99.00
img
SAVERM21.00

[Gundam Head] Yihui 1/35 Gundam Zeta Head Bust

Brand: Yi Hui (Third Party)

Scale: 1/35

Kindly note that, this is a non-Bandai product.
Battery sold separately.
Approximately 35cm height 

* Battery Model: AG3 x 4   CR2032 x 1
* Self assembly is required

Accessories:
- 65 LED units
- Remote control
- Spot Light x 2 (Only available in first batch production)
- Metal Parts
- A5 size water decal










RM499.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gray Zeta

[Da Lin] Water Decal for MG 1/100 Gray Zeta


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Gray Zeta
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Red Zeta

[Da Lin] Water Decal for MG 1/100 Red Zeta


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Red Zeta
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM63.00

P-Bandai: HGUC 1/144 Zeta Plus A1 [Amuro Ray Colors]

P-Bandai: HGUC 1/144 Zeta Plus A1 (Test Image/Amuro Ray Colors)
Release Date: April 2020
Estimated Delivery: June 2020

Another kit from Gundam Sentinel series appears in GunPla form!

This kit was first released as a GunPla Expo exclusive back in 2014. Its come back made its entry to the Premium Bandai online webshop. It shares the same molds and parts with the HGUC 1/144 Zeta Plus A1 with an entirely different color scheme.

It also comes with a special water slide decal seal with Amuro Ray sigil and Karaba Air Force specifications.

The kit is also provided with wide range of articulation! It can also be transformed into a wave rider mode with the help of part switching.

[ACCESSORIES]
  • Beam rifle
  • Beam saber
  • shield

RM175.00

Showing 1 - 30 of 32 products