Gundam Model Kits • MASTER GRADE (MG)

Gundam MKII model unit. Coupled with parts for the G-Defender which lets you create an MG Super Gundam. Standing height almost 30cm! Almost all of the fins and hatches on the G-Defender move to allow various configurations, reveal missile bays, etc. Technical and historical notes Early during the Gryps Conflict, the Anti-Earth Union Group's newly-captured RX-178 Gundam Mark II mobile suit was soon outclassed by new variable-form mobile suits/mobile armor being developed by their Titans enemies. Although fairly impressive for its innovative new "movable frame" construction, the Gundam Mark II soon found itself left behind in terms of mobility, armor and firepower. To compensate for these shortcomings, the Anaheim Electronics Company developed a new weapon to enhance the Mark II's performance. Called the FXA-05D G-Defenser, this new space fighter-like unit was capable of docking with the Gundam Mark II. During cruise/flight mode, this form was called the G-Flyer. However, the Mark II could assume full control of the G-Defenser's weapons as a mobile suit, becoming what was commonly called the RX-178+FXA-05D Super Gundam. The Super Gundam sported an approximately 20% increase in speed/acceleration over the stand-alone Mark II, as well as provided the benefit of additional (and more effective) gundarium armor and the powerful long rifle and missile pods. These improvements allowed the Super Gundam to operate on a more equal footing with the high-performance variable mobile suits being fielded by the Titans at the time. Technical source:http://www.mahq.net Simple Instruction included in a box. Weight: 806g

• Pull-out hip and shoulder joints.
  
• All joints are movable fingers 10.
  
• Mono Movable nozzle head and ears.
  
• Refer to the left and right arm stand.
  
• Detachable head.
  

• Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  
• Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  
• Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  
• Dry transfer decals and clear Gundam stickers are included for markings. 
  
• Simple instruction included in a box.

There are 16 runners of parts here. Those shoulder "binders" are particularly interesting, especially the way the outer nozzle pivots downward. 

• The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
• Combination gimmick for the sword bits allows for a more accurate reproduction!
• Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
• The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
• The pose with the Buster Sword armed looks great! Also comes with the Action Base
• (Black) to display with!
• Uses the GN Shield bits firing form as new mechanism.
• Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
• been reproduced with laser processing and foil sticker.
• The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
• creates a sense of machinery has been produced specifically for the development of MG.
• Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
• (standing/sitting), Action Base 2

- The difference between aircraft equipped with General : wing binders, with mega beam launcher,Change the color of the color forming part of the aircraft commander. - Supplier of linkage with the deformation mechanism to improve the proportions! - Sabre, of arms and grenade built to reproduce the mechanism of armed! - Opening and closing the hatch. Reproduction and internal Mekamorudo, MG dent made to provide details of the brand we all expect. - Accessories: mega beam launcher, beam saber × 2, Shield

• The GP-03S gets the MG treatment and as usual the results are superb. Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. 
  
• Armor is detachable to expose the skeleton and hydraulics. Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. 
  
• The rocket packs are moveable and the hatch opens on top to allow access to the beam sword. The shield folds up to be stored on the arm. The left arm opens and the claw extends outward. 
  
• Two types of hands are included -- fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model.
  

• RX-178 Mk-II Ver.2.0 Titans
  
• We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
• Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
• The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!
  

• The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
• Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

• Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  
• Tons of new features! 
  
• Molded in updated colors as shown in EW! 
  
• New package art creates a unified look for the MG Endless Waltz series! 
  
• MG EW series produce a sense of a new package!
  
• Marking decals designed by Hajime Katoki.
  
• Parts expand for performance-based dynamic posing! 
  
• Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2
  

• Weapon Accessories: rifle, saber, shield, beam shield, Grapple Stinger. 
  
• Effects included: Saber, Blade Beam (leg, wing), beam boomerang, beam Shielding.
  
• Figures included: Athrun Zala of 1 / 100 size (for cockpit, standing postures).
  
• Action base is not included

• Marking the completion of the MG SEED Remaster Project: The original Aile Strike Gundam!
• Following the release of the Duel Gundam Assault Shroud, Aegis Gundam, Buster Gundam and Blitz Gundam, the four SEED Remaster Gundams last year, and using feedback about the technologies and concept designs used, the GAT-X frame is recreated here in high definition! Designed following the newer proportions, this MG reflects the sort of forward-thinking redesigns that characterise the MG series.
• Includes Beam Rifle and folding Armor Schneider knives.
• Can recreate the Perfect Strike Gundam using the MG Sword Launcher Striker Pack! (Sold Separately)
• Can be mounted with most other Striker Packs, and activated with included battery pack! 
• Accessories: Aile Strike Pack, Rechargeable Battery Pack, Beam Rifle, Beam Saber x2,
• Shield, Armor Schneider x2, Pilot Figure x4, Dedicated Stand

MG 1/100 MSM-07 Z'Gok 

• MSM-03 Gogg (MG)

[Daban] 1/100 Jesta (MG) Clear Version

• - Careful color reproduction allows for accurate color separation! 
  
• - Features non-scale Ple-Two figure.
  
• - Includes Beam Saber in converged and tri-pronged styles.
  
• - Decals inspired by Ple-Two.
  

MG 1/100 Jegan

MG 1/100 Gundam Avalanche Exia

[Daban] Metal Build Strike Freedom Gundam