Price Clear







Showing Gundam Model Kits + MASTER GRADE (MG) product(s)

Showing 1 - 30 of 450 products

img
SAVERM79.70

MG 1/100 MSA-003 NEMO

  • Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  • Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  • Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  • Dry transfer decals and clear Gundam stickers are included for markings. 
  • Simple instruction included in a box.

RM112.00
RM112.00 Add to cart
img
SAVERM109.60

MG 1/100 RX-78GP02A Gundam Physalis

There are 16 runners of parts here. Those shoulder "binders" are particularly interesting, especially the way the outer nozzle pivots downward. 


The "atomic bazooka" can be mounted in the hand in firing position, or it breaks down into two pieces, the barrel mounting in the inside of the shield (see photo), with the remainder mounting on the GP02's back. 

Comes with the usual stickers, inner-mechanism detail, multiple sets of hands, beam saber, rifle. Simple instruction included in a box. 
Weight: 806g. 

RM154.00
RM154.00 Add to cart
img
SAVERM122.00

MG 1/100 Sword Impulse Gundam

  • Armed with many compressed gimmicks and purified proportion, here is the arrival of Sword Impulse Gundam! 
  • You can remove the Beam Boomerang from Sword Silhouette, and it can combine to be used as a large boomerang. 
  • The separation gimmick to Sword Silhouette had been fully reproduced! - Includes: Excalibur Laser anti-battleship blade x2, Sword Silhouette x1, Flash Edge Beam Boomerang x2, Beam Shield x1, Beam Rifle x1, Boomerang effect x2, Excalibur effect parts x2, Nose cone x1, Sword Silhouette stand base x1

RM171.50
RM171.50 Add to cart
img
SAVERM122.00

MG 1/100 Freedom Gundam Ver.2.0

  • Mobile Suit Gundam SEED's Freedom Gundam sets a new high mark in MG's evolution with its 2.0 version! 
  • Both frame and armor are completely rescupted with revised proportions! 
  • It's also packed with extra details from the SEED Ver. RM series. With extending elbows, sliding thigh armor, and a flexible waist, it’s perfectly suited to strike heroic poses! 
  • Its wing and beam cannons flex for full burst mode, as well. 
  • A full arsenal includes linkable beam sabers, and other accessories include a stand and a variety of manipulator parts.

RM171.50
RM171.50 Add to cart
img
SAVERM129.50

MG 1/100 RGZ-95 ReZEL Gundam

- Based on the design of the Zeta Gundam, this mass produced MS is the next step in the Federation's MS army ! 

- Transformation mechanism accurately recreates this MS's shift into Wave Rider form while preserving the Suit's unique proportions!
* Wave Rider form grants heightened mobility and speed!
- Plus one gimmick and armed mechanism included.
- Full weapons system! Mount the Beam Rifle saber bayonet, access the arm-mounted Beam Saber storage. Beam Saber magazines are detachable, and extra magazines can be stored in the shield. 
- Includes all the details that we've come to expect from a modern MG!
* Rear Windshield reproduced in transparent elements. 
* Cockpit hatch opens, and scale pilot figure included.

- Accessories: Beam Rifle, Beam Saber x 2, Shield
Item Size/Weight : 39.2 x 31 x 8.3 cm / 814g

RM182.00
RM182.00 Add to cart
img
SAVERM122.00

MG 1/100 MS-14S Gelgoog Char Custom Ver.2.0

MS-14S Gelgoog Char Custom Ver.2.0


Late in the One Year War, the Y designation was removed and the Gelgoog Commander Type was given a limited production run. With a more powerful generator and thruster output, the Commander Type even surpassed the performance of the feared RX-78-2 Gundam, as proven by Char Aznable in Texas Colony and in Solomon space.

RM171.50
RM171.50 Add to cart
img
SAVERM122.00

MG 1/100 00 QAN[T]


  • The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
  • Combination gimmick for the sword bits allows for a more accurate reproduction!
  • Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
  • The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
  • The pose with the Buster Sword armed looks great! Also comes with the Action Base
  • (Black) to display with!
  • Uses the GN Shield bits firing form as new mechanism.
  • Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
  • been reproduced with laser processing and foil sticker.
  • The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
  • creates a sense of machinery has been produced specifically for the development of MG.
  • Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
  • (standing/sitting), Action Base 2

RM171.50
RM171.50 Add to cart
img
SAVERM134.50

MG 1/100 RGZ-95C ReZEL (Commander Type)

- The difference between aircraft equipped with General : wing binders, with mega beam launcher,Change the color of the color forming part of the aircraft commander. - Supplier of linkage with the deformation mechanism to improve the proportions! - Sabre, of arms and grenade built to reproduce the mechanism of armed! - Opening and closing the hatch. Reproduction and internal Mekamorudo, MG dent made to provide details of the brand we all expect. - Accessories: mega beam launcher, beam saber × 2, Shield

RM189.00
RM189.00 Add to cart
img
SAVERM122.00

MG 1/100 Gundam Deathscythe-Hell EW Ver.

  • Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  • Uses the XXX-G Frame developed during the animation!
  • Marking work is designed by Hajime Katoki.
  • Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  • New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  • Able to reproduce the flapping from the animation naturally. 
  • The closed state of the Active Cloak can also be reproduced with a natural form. 
  • Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 

RM171.50
RM171.50 Add to cart
img
SAVERM104.60

MG 1/100 GN-001 Gundam Exia

  • The first MG from Mobile Suit Gundam: 00, this long-awaited kit delivers on every level! 
  • Thanks to advances in kit design, the inner frame moves along with the outer armor to recreate the Exia's unique range of motion! 
  • GN Condensers on the arms/chest/legs are double-layered, clear plastic to reproduce the look of real lenses, giving it a more accurate appearance.
  • Each GN Code piece throughout the body of the Exia is recreated in clear plastic to mimic the look of the Suit in the anime! 
  • Includes custom marking seals and Gundam Decals.
  • Includes GN Code decal sheet.
  • GN drive completely reproduced. As with in the anime, the GN Drive can be removed
  • stand included to hold the Drive while it's not with the Exia.
  • Accessories: GN Sword x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2,
  • GN Beam Saber x2, GN Shield x1, 1/100 Setsuna F. Seiei figure x1

RM147.00
RM147.00 Add to cart
img
SAVERM154.40

MG 1/100 G Fighter (Operation V Model For Gundam Ver.2.0)

Bandai Master Grade (MG) 1/100 G Fighter (Operation V Support Craft for Gundam Ver.2.0)

Add versatility to your Universal Century display with the Master Grade 1/100 G Fighter. Designed specifically to pair with the MG RX-78-2 Gundam Ver.2.0 (sold separately), this heavy support craft replicates the modular transformation systems seen in the original Mobile Suit Gundam anime.

Key Features:
- Multi-Mode Combinations: Designed to integrate with the MG RX-78-2 Gundam Ver.2.0 and its Core Fighter to form classic configurations, including G-Armor, G-Bull, G-Bull Easy, G-Sky, G-Sky Easy, and Gundam High-Sky.
- Functional Gimmicks: Features an opening cockpit canopy, positional mega particle cannons, and detachable landing gear to display the craft in flight or parked.
- In-Scale Figures: Includes 1/100 scale figures of pilots Sleggar Law and Sayla Mass in both standing and sitting poses.
- Display Support: Comes with adapter parts to assist in mounting the heavy fighter or its combined forms onto action bases (bases sold separately).

Note: Assembly is required. Snap-fit construction eliminates the need for glue. To utilize the combination gimmicks, the MG RX-78-2 Gundam Ver.2.0 is required and must be purchased separately.

RM217.00
RM217.00 Add to cart
img
SAVERM130.00

MG 1/100 Destiny Gundam

  • Recreating the unique features of this dynamic Mobile Suit, Mobile Suit Gundam SEED Destiny -titular Suit is reincarnated as a Master Grade kit! 
  • Moveable gimmick tuned to the movement of the collar area.
  • Gimmick included to expand the hip joint, allowing for a wider range of motion.
  • Accurate proportions highlight the characteristic silhouette of the Destiny Gundam. 
  • Includes 1/100 scale figures of Sinn and Stella.
  • Stand features a wing motif.
  • Accessories: High-Energy Long-Range Beam Cannon x1, Arondight Beam Sword x1, Beam Rifle x1, Shield x1, Beam Boomerang x2, Effect Part (Blade) x3, Effect Part (Boomerang) x2, Effect Part (Shield) x1, Beam Cannon Manipulators x2 (Left and Right), 1/100 Pilot Figure x2

RM182.00
RM182.00 Add to cart
img
SAVERM104.60

MG 1/100 Wing Gundam Zero Custom

Wikipedia information
  • The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
  • Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

RM147.00
RM147.00 Add to cart
img
SAVERM62.40

MG 1/100 Shining Gundam

Transform into Super Mode 1/20 Domon in Virtual Suit is included. Shining Finger and other fighting hand parts are included.

RM87.50
img
SAVERM97.10

MG 1/100 Wing Gundam EW Ver.

  • Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  • Tons of new features! 
  • Molded in updated colors as shown in EW! 
  • New package art creates a unified look for the MG Endless Waltz series! 
  • MG EW series produce a sense of a new package!
  • Marking decals designed by Hajime Katoki.
  • Parts expand for performance-based dynamic posing! 
  • Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2

RM136.50
RM136.50 Add to cart
img
SAVERM114.50

MG 1/100 Duel Gundam Assault Shroud

  • Duel Gundam Assault Shroud recreated as a Master Grade! 
  • The second in the SEED Remaster series, the Duel Gundam is designed on the versatile X100 frame system! 
  • Simple assembly provides the maximum range of motion with a minimum number of parts.
  • Completely redesigned for the Remaster series of MGs.
  • Reproduce the attachable Assault Shroud gimmick! 
  • Cockpit hatch opens and closes, and cockpit internals are detailed.
  • Yzak Joul figures included- sitting and standing
  • Designed using exclusive blueprints for this Master Grade kit. 
  • Accessories: Shield, 57mm High-Energy Rifle with 175mm Grenade Launcher,
  • Shiva 115mm Rail Gun, 250mm 5-Barrel Missile Pod, 350mm Bazooka, Saber x2

RM161.00
RM161.00 Add to cart
img
SAVERM97.10

MG 1/100 MSM-03 Gogg

  • MSM-03 Gogg (MG)
Finally, a Master-Grade kit of the MSM-03 Gogg, Zeon's mass production amphibious MS! Superb design and tooling by Bandai mean that your Gogg, when built, will be able to stand in just about any pose you might have seen in the Gundam anime! Bandai's inner frame system is highly jointed, with armor parts laid over top of a flexible inner skeleton, making those long arms more poseable than they look.

RM136.50
RM136.50 Add to cart
img
SAVERM33.00

[Daban] 6641 MG 1/100 Jesta Canon (Clear Version)

[Daban] 1/100 Jesta (MG) Clear Version


Series: Gundam UC
Grade:Master Grade (MG)
Manufacturer: Daban
Scale:1/100

Type : Clear Version

Please note that this is not Bandai product

RM95.00
img
SAVERM109.60

MG 1/100 AMX-004-3 Qubeley MK-II (Ple-Two Custom)

  • - Careful color reproduction allows for accurate color separation! 
  • - Features non-scale Ple-Two figure.
  • - Includes Beam Saber in converged and tri-pronged styles.
  • - Decals inspired by Ple-Two.

RM154.00
RM154.00 Add to cart
img
SAVERM109.60

MG 1/100 Jegan

MG 1/100 Jegan


Following the silhouette balance that appeared in "Char's Counter Attack", reproduced Jegan with a sense of stability a lot. - Adopt MS internal frame of completely new modeling. It can be reproduced simply by assembling the inner skeleton symbolizing mass production machine. - Hand parts of four kinds on the left and right are included. Reproducible from the pose that sets the rifle to the name scene that captures the Axis. 

Accessories:
- Beam rifle x 1 
- Beam . saber x 1 
- Shield x 1 [Product content] 

Product Content:
- Molded article x 17 
- Foil seal x 1 
- Marking stick x 1 
- Instruction manual x 1

RM154.00
RM154.00 Add to cart
img
SAVERM162.80

MG 1/100 Gundam Avalanche Exia

MG 1/100 Gundam Avalanche Exia


Package include
  • GN Long Blade
  • GN Short Blade
  • GN Shield
  • GN Beam Dagger x 2
  • GN Beam Saber x 2
Come with exclusive action base. 
This unit is release as [P-Bandai] product in Non-Asia Countries.

RM262.50
RM262.50 Add to cart
img
SAVERM146.90

MG 1/100 00 QAN[T] / Quanta Full Saber

MG 1/100 00 QAN[T] FULL SABER

- Faithfully reproduce the body shape of Double O Quanta Full Saber!
- Armor equipped with a variety of mechanisms `GN Sword IV Full Saber` is reproduced with new parts.
- The GN capacitor is mounted and the back part with the connection part with GN sword IV is reproduced by new modeling.
- A head antenna that imaged visuals drawn by Mr. Ebi Ogawa Kan Attack comes with new modeling.
- Marking seals are included, including markings for GN Sword IV Full Saber.
- Base for GN sword IV is included.

[accessories]
- GN Sword IV x 1
- GN Gamblade x 3
- GN sword V x 1
- GN sword bit
- GN shield x 1
- Display arm for arms x 1

[Product content]
- Molded article x 23
- Marking seal x 1
- Foil seal x 1
- Dry decal x 1
- Instruction manual x 1

RM206.50
RM206.50 Add to cart
img
SAVERM32.00

Daban 8819 MG 1/100 Gyunei Guss's Jagd Doga Model Kits

Daban 1/100 8819 MSN-03 Jagd Doga Model Kit
 
Material: ABS
Scale: 1/100
 
Include:
- Model kit to build main figure
- 6 Changeable hands
- 2 Beam sabers
- Beam Assault Rifle
- Shield
- Other accessories
- Decal

RM118.00
RM118.00 Add to cart
img
SAVERM124.50

MG 1/100 DOM Ver. 2020

From Mobile Suit Gundam, the popular MG 1/100 Dom has been upgraded with new molds and parts updates!
Improved exterior parts such as the waist and arms with a new mold. In particular, the shape of the arm has been modified so that the connection between the shoulder and forearm looks natural, and the joint structure of the elbow has also been redesigned.
A forward swing mechanism is mounted on the connection between the shoulder and the torso. The impressive pose of holding the giant buzz reduces the interference of each part and is decided smoothly.
A swing movable structure is newly adopted for the hip joint. In addition, the range of motion of the legs has been greatly expanded by adding movable axes to the thigh connection and updating the waist side armor.
The internal frame of the ankle has been changed to reproduce Dom\'s characteristic crouched pose.
A wealth of weapons such as Giant Buzz, Raketen Buzz, and Sturm Faust are included.

[Accessories]
  • Heat Saber x 1
  • Giant Buzz x 1
  • Raketen Buzz x 1
  • Sturm Faust x 2
  • 90mm Machine Gun x 1
  • Water slide decal x 1

RM175.00
RM175.00 Add to cart
img
SAVERM60.00

Daban 6656 MG 1/100 Unicorn Gundam Perfectibility

Daban 6656 MG 1/100 Unicorn Gundam Perfectibility


Scale : 1/100
Series : Unicorn Gundam
Brand : Daban
Grade : Master Grade

Please note that this is Not Bandai product

RM160.00
RM160.00 Add to cart
img
SAVERM23.00

Daban 8824 MG 1/100 MSZ-006 P2/3C Zeta Gundam Red Zeta Gundam

Daban 8824 MG 1/100 MSZ-006 P2/3C Zeta Gundam Red Zeta Gundam

Brand : Daban
Scale : MG 1/100

Please note that this is not Bandai product

RM115.00
RM115.00 Add to cart
img
SAVERM40.00

DABAN 8826 MG 1/100 Astray Gold Frame Amatsu Hana

Brand : Daban 
Code : 8826
Scale : Master Grade 1/100

Item Contents : 
  • Body Unit
  • "Maga no Ikutachi" Energy Absorption Blade
  • "Trikeros Kai" Offensive Shield System
  • "Totsuka no Tsurugi" Saber
  • "Trikeros Kai" Offensive Shield System
  • Sword
  • Dedicated Standbase
  • Water-slide decal

RM160.00
RM160.00 Add to cart
img
SAVERM30.00

P-Bandai: MG 1/100 Lightning Strike Gundam Ver. RM

Premium Bandai has announced the release of the Lightning Strike Gundam Ver. RM to their Master Grade lineup! This kit shares the same molds with the Ver. RM MG Aile Strike Gundam with some newly molded parts for its Lightning Striker Pack. The pack was originally released to celebrate the launching of the Gundam China Project (GCP) in 2021 exclusive in red color schematics.

A sheet of water slide decal designed specifically for the Lightning Striker is also included in the kit! The kit is also completed with the railgun \"70-31 type electromagnetic farming gun\" that is also exclusive for the Lightning Strike Gundam!

The Lightning Striker expansion pack is also available via Premium Bandai for those who already own the regular released MG 1/100 Aile Strike Gundam Ver. RM .

RM350.00
RM350.00 Add to cart
img
SAVERM30.00

DABAN 6628 MG 1/100 RX-78-2 Ver 3.0 AAPE Camouflage Ver.

DABAN 6628 MG RX-78-2 Ver 3.0 AAPE Camouflage Ver.
Brand : Daban
Code : 6628 (AAPE)
Grade : MG
Scale : 1/100
Water Decal is included

Please note that this is not Bandai product

RM80.00
Get ready to upgrade your collection with the exceptional Master Grade Gundam models. These high-quality Gunpla models offer the ultimate building experience, showcasing intricate details and accurate representations of the iconic Mobile Suits from the Gundam universe. In this blog post, we will take you through our top picks for the List of Master Grade Gundam. Whether you are a seasoned builder or just starting out, our Collection of Master Grade Gundam models has something for everyone.

Discover the best Master Grade Gundam available at www.gundam.my and get a glimpse of what sets them apart from the rest. From the intricate inner mechanics to the stunning outer design, these Overview of Master Grade Gundam figures will leave you in awe. Moreover, gundam.my guide you through the best Guide to the Best Master Grade Gundam to help you find the perfect model for your collection.

In addition, Master Grade (MG) is a line of Gunpla kits based on Mobile Suit Gundam anime series. It was first produced by Bandai in 1995 as part of the Gundam 15th Anniversary project.

Master Grade gundam are 1/100 scale kits designed and made to higher standards than High Grade (HG) kits but fall under Perfect Grade (PG) kits.

In 2002, Bandai started releasing a Master Grade line under the label of Ver. Ka (Version Katoki), in honor with veteran designer Hajime Katori.

Showing 1 - 30 of 450 products