• Armed with many compressed gimmicks and purified proportion, here is the arrival of Sword Impulse Gundam! 
  
• You can remove the Beam Boomerang from Sword Silhouette, and it can combine to be used as a large boomerang. 
  
• The separation gimmick to Sword Silhouette had been fully reproduced! - Includes: Excalibur Laser anti-battleship blade x2, Sword Silhouette x1, Flash Edge Beam Boomerang x2, Beam Shield x1, Beam Rifle x1, Boomerang effect x2, Excalibur effect parts x2, Nose cone x1, Sword Silhouette stand base x1
  

• The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
• Combination gimmick for the sword bits allows for a more accurate reproduction!
• Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
• The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
• The pose with the Buster Sword armed looks great! Also comes with the Action Base
• (Black) to display with!
• Uses the GN Shield bits firing form as new mechanism.
• Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
• been reproduced with laser processing and foil sticker.
• The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
• creates a sense of machinery has been produced specifically for the development of MG.
• Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
• (standing/sitting), Action Base 2

- The difference between aircraft equipped with General : wing binders, with mega beam launcher,Change the color of the color forming part of the aircraft commander. - Supplier of linkage with the deformation mechanism to improve the proportions! - Sabre, of arms and grenade built to reproduce the mechanism of armed! - Opening and closing the hatch. Reproduction and internal Mekamorudo, MG dent made to provide details of the brand we all expect. - Accessories: mega beam launcher, beam saber × 2, Shield

RX-79(G) Gundam Ground Type (MG) (w Clear Kit)

• Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  
• Uses the XXX-G Frame developed during the animation!
  
• Marking work is designed by Hajime Katoki.
  
• Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  
• New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  
• Able to reproduce the flapping from the animation naturally. 
  
• The closed state of the Active Cloak can also be reproduced with a natural form. 
  
• Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 
  

• The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
• Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

• MG RGM-79(G) GM Ground Type
  

• Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  
• Tons of new features! 
  
• Molded in updated colors as shown in EW! 
  
• New package art creates a unified look for the MG Endless Waltz series! 
  
• MG EW series produce a sense of a new package!
  
• Marking decals designed by Hajime Katoki.
  
• Parts expand for performance-based dynamic posing! 
  
• Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2
  

• Built-in Phalanx cannons stored in the head give this Suit a strong defense weapon.
  
• Features huge rear skirt and knee armor, as well as upgraded thrusters.
  
• Can convert from Quattro Custom to standard Rick Dias! 
  

• Here's Char's Zaku II, getting a "Ver. 2.0" update more than a decade after its first MG kit release.
  
• This kit features a completely revamped inner frame construction that allows for even greater range of articulation and realistic movement; it's even able to be posed kneeling on one leg as seen in the show!
  
• Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly.
  
• Weapons include a Zaku machine gun, Zaku bazooka, and a heat hawk. Two types of blade antennas are included along with a lift vehicle to bring the included 1/100-scale standing Char Aznable (molded in red) to the cockpit.
  

• It -  is the 15th anniversary of the Master Grade line! The fans demanded it, and thanks to new kit technologies, it -  is finally possible! Standing at over 9 inches tall and weighing in at almost a pound and a half, the massive S-class kit: The O! 
  
• At just under 1.5lbs, the massive inner frame and joint support structure emphasizes weight distribution while retaining the level of detail that you will come to expect in a Master Grade kit.
• Hidden arms accurately recreated for this kit with moving fingers and folding gimmick.
• Highlighting the power and scale of this mammoth Mobile Suit, the legs of this kit have a full, heavy feeling to ground the kit for display! 
• The full body of the kit is highly detailed for a style worthy of the 15th anniversary MG kit! 
• Accessory: Beam Rifle, Beam Sword x4

• ZGok Char customise with shining Red ver!
  
• The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series.
  
• The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. - Weapon: 4 iron jaws
  

• Weapon Accessories: rifle, saber, shield, beam shield, Grapple Stinger. 
  
• Effects included: Saber, Blade Beam (leg, wing), beam boomerang, beam Shielding.
  
• Figures included: Athrun Zala of 1 / 100 size (for cockpit, standing postures).
  
• Action base is not included

• Accessories: Rifle only, dedicated shield, beam saber x? 2, Beam A-xe x? 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  
• The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
• Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
• The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
• With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".
  

• From "New Mobile Report Gundam W Endless Waltz The Glory of Losers", Wing Gundam Proto Zero appears as MG. 
• The parts are completely newly molded and functions for the full transformation are accommodated. The movable frames made of new materials are paintable. 
• Full transformation of MS -  ?? Neo-Bird can be re-created with various gimmicks such as the 180 degrees rotation of its head part and the lower body part. 
• The conspicuous wings have various gimmicks such as the deployment function. The side armor fins on its waist are movable. 
• The hatches of the machine cannons on its shoulders are openable. The quadruple barreled Vulcan is precisely re-created. 
• The shoulder armor is dual structure and openable. The storage gimmicks for the beam saber on its shoulder and Verniers inside of the shoulder armor are precisely re-created. 
• The overwhelming "Twin Buster Rifle" can be separated into the right and left. 
• The original marking produced by Hajime Katoki is included. 
• A display stand is included. The special joints for the kit make it possible to display it in MS mode and Neo-Bird mode in midair. 
• Runner x18, Foil sticker x1, Dry decal x1, Tetron sticker x1, Instruction manual x1

[Daban] 1/100 Gundam Astray Red Frame (MG)

MG 1/100 RMS-099 Rick Dias

• This Master Grade MS-18E Kampfer is fully posable at all joints. 
  
• It features extensive internal detail, such as individually-posable finger joints. 
  
• If the normal Master Grade magic wasn’t enough, it also comes with numerous weapons, including the beam saber, 2 Giant Baz bazookas, Sturm Faust with an extra round, a shotgun with detachable shoulder stock, and the chain mine. 
  
• Most of these mount right on the mech’s back or hips for firing and/or storage. 
  
• Of course, the kit is also molded in color, and features easy snap assembly.
  

• From the anime Mobile Suit Gundam, ace pilot M’Quve’s signature Suit joins the Master Grade lineup! 
  
• Double hip joints allow wide, sweeping range of motion in the hips. 
  
• LED light up gimmick in the sword uses a CR1220 coin battery (sold separately) for dynamic display options! .
  
• Shield features a complex internal structure and can store Hide Bombs (Hide Bombs included for deployed or stored state.)
  
• Includes MQuve figure in 1/100 scale and 1/20 scale.
  
• Accessories: Beam Sword x1, Shield x1